1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2023 Realtek Semiconductor Corporation
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Realtek DHC RTD1619B Pin Controller
maintainers:
- TY Chang <tychang@realtek.com>
description:
The Realtek DHC RTD1619B is a high-definition media processor SoC. The
RTD1619B pin controller is used to control pin function, pull up/down
resistor, drive strength, schmitt trigger and power source.
properties:
compatible:
const: realtek,rtd1619b-pinctrl
reg:
maxItems: 1
patternProperties:
'-pins$':
type: object
allOf:
- $ref: pincfg-node.yaml#
- $ref: pinmux-node.yaml#
properties:
pins:
items:
enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7,
gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14,
gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21,
gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28,
gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35,
hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42,
gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49,
gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx,
gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63,
gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70,
gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd,
spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb,
emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3,
emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc,
gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en,
pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0,
pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1,
ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc,
iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ]
function:
enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0,
spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1,
gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2,
pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1,
pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1,
usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1,
ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable,
hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0,
vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1,
vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1,
aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2,
aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0,
scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2,
acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable,
aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable,
arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain,
standby_dbg, test_loop_dis ]
drive-strength:
enum: [4, 8]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-push-pull: true
power-source:
description: |
Valid arguments are described as below:
0: power supply of 1.8V
1: power supply of 3.3V
enum: [0, 1]
realtek,drive-strength-p:
description: |
Some of pins can be driven using the P-MOS and N-MOS transistor to
achieve finer adjustments. The block-diagram representation is as
follows:
VDD
|
||--+
+-----o|| P-MOS-FET
| ||--+
IN --+ +----- out
| ||--+
+------|| N-MOS-FET
||--+
|
GND
The driving strength of the P-MOS/N-MOS transistors impacts the
waveform's rise/fall times. Greater driving strength results in
shorter rise/fall times. Each P-MOS and N-MOS transistor offers
8 configurable levels (0 to 7), with higher values indicating
greater driving strength, contributing to achieving the desired
speed.
The realtek,drive-strength-p is used to control the driving strength
of the P-MOS output.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
realtek,drive-strength-n:
description: |
Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
is used to control the driving strength of the N-MOS output.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
realtek,duty-cycle:
description: |
An integer describing the level to adjust output duty cycle, controlling
the proportion of positive and negative waveforms in nanoseconds.
Valid arguments are described as below:
0: 0ns
2: + 0.25ns
3: + 0.5ns
4: -0.25ns
5: -0.5ns
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 2, 3, 4, 5 ]
required:
- pins
additionalProperties: false
required:
- compatible
- reg
additionalProperties: false
examples:
- |
pinctrl@4e000 {
compatible = "realtek,rtd1619b-pinctrl";
reg = <0x4e000 0x130>;
emmc-hs200-pins {
pins = "emmc_clk",
"emmc_cmd",
"emmc_data_0",
"emmc_data_1",
"emmc_data_2",
"emmc_data_3",
"emmc_data_4",
"emmc_data_5",
"emmc_data_6",
"emmc_data_7";
function = "emmc";
realtek,drive-strength-p = <0x2>;
realtek,drive-strength-n = <0x2>;
};
i2c-0-pins {
pins = "gpio_12",
"gpio_13";
function = "i2c0";
drive-strength = <4>;
};
};
|
