blob: af41e7ccd7848c90909918237adf743939902251 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2021 Sebastian Reichel
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI BQ24735 Li-Ion Battery Charger
maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- $ref: power-supply.yaml#
properties:
compatible:
const: ti,bq24735
reg:
maxItems: 1
interrupts:
description: AC adapter plug event interrupt
maxItems: 1
ti,ac-detect-gpios:
maxItems: 1
description: |
This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
that is configured as an input and connected to the ACOK pin on the bq24735.
Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
absence despite ACOK being active (high) on AC adapter presence.
ti,charge-current:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Used to control and set the charging current.
This value must be between 128mA and 8.128A with a 64mA step resolution.
The POR value is 0x0000h. This number is in mA (e.g. 8192).
See spec for more information about the ChargeCurrent (0x14h) register.
ti,charge-voltage:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Used to control and set the charging voltage.
This value must be between 1.024V and 19.2V with a 16mV step resolution.
The POR value is 0x0000h. This number is in mV (e.g. 19200).
See spec for more information about the ChargeVoltage (0x15h) register.
ti,input-current:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Used to control and set the charger input current.
This value must be between 128mA and 8.064A with a 128mA step resolution.
The POR value is 0x1000h. This number is in mA (e.g. 8064).
See the spec for more information about the InputCurrent (0x3fh) register.
ti,external-control:
type: boolean
description: |
Indicates that the charger is configured externally and that the host should not
attempt to enable/disable charging or set the charge voltage/current.
poll-interval:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
charger@9 {
compatible = "ti,bq24735";
reg = <0x9>;
ti,ac-detect-gpios = <&gpio 72 0x1>;
};
};
|
