blob: 66993d378aaf59ff47ae9b867787cdf95fa70fe3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/infineon,peb2466.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Infineon PEB2466 codec
maintainers:
- Herve Codina <herve.codina@bootlin.com>
description: |
The Infineon PEB2466 codec is a programmable DSP-based four channels codec
with filters capabilities.
The time-slots used by the codec must be set and so, the properties
'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
'dai-tdm-slot-rx-mask' must be present in the sound card node for sub-nodes
that involve the codec. The codec uses one 8bit time-slot per channel.
'dai-tdm-tdm-slot-with' must be set to 8.
The PEB2466 codec also supports 28 gpios (signaling pins).
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml
- $ref: dai-common.yaml#
properties:
compatible:
const: infineon,peb2466
reg:
description:
SPI device address.
maxItems: 1
clocks:
items:
- description: Master clock
clock-names:
items:
- const: mclk
spi-max-frequency:
maximum: 8192000
reset-gpios:
description:
GPIO used to reset the device.
maxItems: 1
firmware-name:
$ref: /schemas/types.yaml#/definitions/string
description:
Filters coefficients file to load. If this property is omitted, internal
filters are disabled.
'#sound-dai-cells':
const: 0
'#gpio-cells':
const: 2
gpio-controller: true
required:
- compatible
- reg
- '#sound-dai-cells'
- gpio-controller
- '#gpio-cells'
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
audio-codec@0 {
compatible = "infineon,peb2466";
reg = <0>;
spi-max-frequency = <8192000>;
reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
};
};
|
