1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NAU8825 audio CODEC
maintainers:
- John Hsu <KCHSU0@nuvoton.com>
allOf:
- $ref: dai-common.yaml#
properties:
compatible:
enum:
- nuvoton,nau8825
reg:
maxItems: 1
interrupts:
maxItems: 1
nuvoton,jkdet-enable:
description:
Enable jack detection via JKDET pin.
type: boolean
nuvoton,jkdet-pull-enable:
description:
Enable JKDET pin pull.
If set - pin pull enabled, otherwise pin in high impedance state.
type: boolean
nuvoton,jkdet-pull-up:
description:
Pull-up JKDET pin.
If set then JKDET pin is pull up, otherwise pull down.
type: boolean
nuvoton,jkdet-polarity:
$ref: /schemas/types.yaml#/definitions/uint32
description:
JKDET pin polarity.
enum:
- 0 # active high
- 1 # active low
default: 1
nuvoton,vref-impedance:
$ref: /schemas/types.yaml#/definitions/uint32
description:
VREF Impedance selection.
enum:
- 0 # Open
- 1 # 25 kOhm
- 2 # 125 kOhm
- 3 # 2.5 kOhm
default: 2
nuvoton,micbias-voltage:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Micbias voltage level.
enum:
- 0 # VDDA
- 1 # VDDA
- 2 # VDDA * 1.1
- 3 # VDDA * 1.2
- 4 # VDDA * 1.3
- 5 # VDDA * 1.4
- 6 # VDDA * 1.53
- 7 # VDDA * 1.53
default: 6
nuvoton,sar-threshold-num:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Number of buttons supported.
minimum: 1
maximum: 4
default: 4
nuvoton,sar-threshold:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
Impedance threshold for each button. Array that contains up to 8 buttons
configuration. SAR value is calculated as
SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
'nuvoton,sar-voltage', R - button impedance.
Refer datasheet section 10.2 for more information about threshold
calculation.
minItems: 1
maxItems: 4
items:
minimum: 0
maximum: 255
nuvoton,sar-hysteresis:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Button impedance measurement hysteresis.
default: 0
nuvoton,sar-voltage:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Reference voltage for button impedance measurement.
enum:
- 0 # VDDA
- 1 # VDDA
- 2 # VDDA * 1.1
- 3 # VDDA * 1.2
- 4 # VDDA * 1.3
- 5 # VDDA * 1.4
- 6 # VDDA * 1.53
- 7 # VDDA * 1.53
default: 6
nuvoton,sar-compare-time:
$ref: /schemas/types.yaml#/definitions/uint32
description:
SAR compare time.
enum:
- 0 # 500 ns
- 1 # 1 us
- 2 # 2 us
- 3 # 4 us
default: 1
nuvoton,sar-sampling-time:
$ref: /schemas/types.yaml#/definitions/uint32
description:
SAR sampling time.
enum:
- 0 # 2 us
- 1 # 4 us
- 2 # 8 us
- 3 # 16 us
default: 1
nuvoton,short-key-debounce:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Button short key press debounce time.
enum:
- 0 # 30 ms
- 1 # 50 ms
- 2 # 100 ms
- 3 # 30 ms
default: 3
nuvoton,jack-insert-debounce:
$ref: /schemas/types.yaml#/definitions/uint32
description:
number from 0 to 7 that sets debounce time to 2^(n+2) ms.
maximum: 7
default: 7
nuvoton,jack-eject-debounce:
$ref: /schemas/types.yaml#/definitions/uint32
description:
number from 0 to 7 that sets debounce time to 2^(n+2) ms
maximum: 7
default: 0
nuvoton,crosstalk-enable:
description:
make crosstalk function enable if set.
type: boolean
nuvoton,adcout-drive-strong:
description:
make the drive strength of ADCOUT IO PIN strong if set.
Otherwise, the drive keeps normal strength.
type: boolean
nuvoton,adc-delay-ms:
description:
Delay (in ms) to make input path stable and avoid pop noise.
The default value is 125 and range between 125 to 500 ms.
minimum: 125
maximum: 500
default: 125
clocks:
maxItems: 1
clock-names:
items:
- const: mclk
'#sound-dai-cells':
const: 0
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
codec@1a {
#sound-dai-cells = <0>;
compatible = "nuvoton,nau8825";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
nuvoton,jkdet-enable;
nuvoton,jkdet-pull-enable;
nuvoton,jkdet-pull-up;
nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
nuvoton,vref-impedance = <2>;
nuvoton,micbias-voltage = <6>;
// Setup 4 buttons impedance according to Android specification
nuvoton,sar-threshold-num = <4>;
nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
nuvoton,sar-hysteresis = <1>;
nuvoton,sar-voltage = <0>;
nuvoton,sar-compare-time = <0>;
nuvoton,sar-sampling-time = <0>;
nuvoton,short-key-debounce = <2>;
nuvoton,jack-insert-debounce = <7>;
nuvoton,jack-eject-debounce = <7>;
nuvoton,crosstalk-enable;
clock-names = "mclk";
clocks = <&tegra_pmc 1>;
};
};
|
