blob: d7668f41b03bc78418c9d21239fd635244f2bda3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
Broadcom BCM2835 auxiliary SPI1/2 controller
The BCM2835 contains two forms of SPI master controller, one known simply as
SPI0, and the other known as the "Universal SPI Master"; part of the
auxiliary block. This binding applies to the SPI1/2 controller.
Required properties:
- compatible: Should be "brcm,bcm2835-aux-spi".
- reg: Should contain register location and length for the spi block
- interrupts: Should contain shared interrupt of the aux block
- clocks: The clock feeding the SPI controller - needs to
point to the auxiliary clock driver of the bcm2835,
as this clock will enable the output gate for the specific
clock.
- cs-gpios: the cs-gpios (native cs is NOT supported)
see also spi-bus.txt
Example:
spi1@7e215080 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e215080 0x40>;
interrupts = <1 29>;
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>;
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
};
spi2@7e2150c0 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e2150c0 0x40>;
interrupts = <1 29>;
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>;
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
};
|
