blob: 16db34d464dd6b5e2fae59f2d350d9db34500d3e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
.. SPDX-License-Identifier: GPL-2.0-or-later
Kernel driver corsair-psu
=========================
Supported devices:
* Corsair Power Supplies
Corsair HX550i
Corsair HX650i
Corsair HX750i
Corsair HX850i
Corsair HX1000i (Series 2022 and 2023)
Corsair HX1200i
Corsair HX1500i (Series 2022 and 2023)
Corsair RM550i
Corsair RM650i
Corsair RM750i
Corsair RM850i
Corsair RM1000i
Author: Wilken Gottwalt
Description
-----------
This driver implements the sysfs interface for the Corsair PSUs with a HID protocol
interface of the HXi and RMi series.
These power supplies provide access to a micro-controller with 2 attached
temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
power usage and 4 sensors for current levels and additional non-sensor information
like uptimes.
Sysfs entries
-------------
======================= ========================================================
curr1_input Total current usage
curr2_input Current on the 12v psu rail
curr2_crit Current max critical value on the 12v psu rail
curr3_input Current on the 5v psu rail
curr3_crit Current max critical value on the 5v psu rail
curr4_input Current on the 3.3v psu rail
curr4_crit Current max critical value on the 3.3v psu rail
fan1_input RPM of psu fan
in0_input Voltage of the psu ac input
in1_input Voltage of the 12v psu rail
in1_crit Voltage max critical value on the 12v psu rail
in1_lcrit Voltage min critical value on the 12v psu rail
in2_input Voltage of the 5v psu rail
in2_crit Voltage max critical value on the 5v psu rail
in2_lcrit Voltage min critical value on the 5v psu rail
in3_input Voltage of the 3.3v psu rail
in3_crit Voltage max critical value on the 3.3v psu rail
in3_lcrit Voltage min critical value on the 3.3v psu rail
power1_input Total power usage
power2_input Power usage of the 12v psu rail
power3_input Power usage of the 5v psu rail
power4_input Power usage of the 3.3v psu rail
pwm1 PWM value, read only
pwm1_enable PWM mode, read only
temp1_input Temperature of the psu vrm component
temp1_crit Temperature max cirtical value of the psu vrm component
temp2_input Temperature of the psu case
temp2_crit Temperature max critical value of psu case
======================= ========================================================
Usage Notes
-----------
It is an USB HID device, so it is auto-detected, supports hot-swapping and
several devices at once.
Flickering values in the rail voltage levels can be an indicator for a failing
PSU. Accordingly to the default automatic fan speed plan the fan starts at about
30% of the wattage rating. If this does not happen, a fan failure is likely. The
driver also provides some additional useful values via debugfs, which do not fit
into the hwmon class.
Debugfs entries
---------------
======================= ========================================================
ocpmode Single or multi rail mode of the PCIe power connectors
product Product name of the psu
uptime Session uptime of the psu
uptime_total Total uptime of the psu
vendor Vendor name of the psu
======================= ========================================================
|
