1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
|
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for Synology DS116 NAS
*
* Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
*/
/dts-v1/;
#include "armada-385.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Synology DS116";
compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
i2c@11000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
serial@12000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
serial@12100 {
/* A PIC16F1829 is connected to uart1 at 9600 bps,
* and takes single-character orders :
* "1" : power off // already handled by the poweroff node
* "2" : short beep
* "3" : long beep
* "4" : turn the power LED ON
* "5" : flash the power LED
* "6" : turn the power LED OFF
* "7" : turn the status LED OFF
* "8" : turn the status LED ON
* "9" : flash the status LED
* "A" : flash the motherboard LED (D8)
* "B" : turn the motherboard LED OFF
* "C" : hard reset
*/
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
poweroff@12100 {
compatible = "synology,power-off";
reg = <0x12100 0x100>;
clocks = <&coreclk 0>;
};
ethernet@70000 {
pinctrl-names = "default";
phy = <&phy0>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <0>;
status = "okay";
};
mdio@72004 {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
phy0: ethernet-phy@1 {
reg = <1>;
};
};
sata@a8000 {
pinctrl-names = "default";
pinctrl-0 = <&sata0_pins>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
sata0: sata-port@0 {
reg = <0>;
target-supply = <®_5v_sata0>;
};
};
bm@c8000 {
status = "okay";
};
usb3@f0000 {
usb-phy = <&usb3_0_phy>;
status = "okay";
};
usb3@f8000 {
usb-phy = <&usb3_1_phy>;
status = "okay";
};
};
bm-bppi {
status = "okay";
};
gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
<&gpio1 17 GPIO_ACTIVE_HIGH>,
<&gpio1 16 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0>,
<1500 1>,
<2500 2>,
<3000 3>,
<3400 4>,
<3700 5>,
<3900 6>,
<4000 7>;
#cooling-cells = <2>;
};
gpio-leds {
compatible = "gpio-leds";
/* The green part is on gpio0.20 which is also used by
* sata0, and accesses to SATA disk 0 make it blink so it
* doesn't need to be declared here.
*/
led-orange {
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
label = "ds116:orange:disk";
default-state = "off";
};
};
};
usb3_0_phy: usb3_0_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <®_usb3_0_vbus>;
#phy-cells = <0>;
};
usb3_1_phy: usb3_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <®_usb3_1_vbus>;
#phy-cells = <0>;
};
reg_usb3_0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus0";
pinctrl-names = "default";
pinctrl-0 = <&xhci0_vbus_pins>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
};
reg_usb3_1_vbus: usb3-vbus1 {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus1";
pinctrl-names = "default";
pinctrl-0 = <&xhci1_vbus_pins>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
};
reg_sata0: pwr-sata0 {
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-boot-on;
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata0: v5-sata0 {
compatible = "regulator-fixed";
regulator-name = "v5.0-sata0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <®_sata0>;
};
reg_12v_sata0: v12-sata0 {
compatible = "regulator-fixed";
regulator-name = "v12.0-sata0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <®_sata0>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "macronix,mx25l6405d", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
/* Note: there is a redboot partition table despite u-boot
* being used. The names presented here are the same as those
* found in the FIS directory. There is also a small device
* tree in the last 64kB of the RedBoot partition which is not
* enumerated. The MAC address and the serial number are listed
* in the "vendor" partition.
*/
partition@0 {
label = "RedBoot";
reg = <0x00000000 0x000f0000>;
read-only;
};
partition@c0000 {
label = "zImage";
reg = <0x000f0000 0x002d0000>;
};
partition@390000 {
label = "rd.gz";
reg = <0x003c0000 0x00410000>;
};
partition@7d0000 {
label = "vendor";
reg = <0x007d0000 0x00010000>;
read-only;
};
partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>;
read-only;
};
partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>;
read-only;
};
};
};
&pinctrl {
/* use only one pin for UART1, as mpp20 is used by sata0 */
uart1_pins: uart-pins-1 {
marvell,pins = "mpp19";
marvell,function = "ua1";
};
xhci0_vbus_pins: xhci0_vbus_pins {
marvell,pins = "mpp58";
marvell,function = "gpio";
};
xhci1_vbus_pins: xhci1_vbus_pins {
marvell,pins = "mpp59";
marvell,function = "gpio";
};
};
|
