summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
blob: a152eeb78e882c1658f266af31e10a99ebe9e803 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright (c) 2020 Protonic Holland
 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "imx6ull.dtsi"

/ {
	model = "JOZ Access Point";
	compatible = "joz,jozacp", "fsl,imx6ull";

	chosen {
		stdout-path = &uart1;
	};

	/* On board name LED_RGB1 */
	led-controller-1 {
		compatible = "pwm-leds";

		led-0 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <0>;
			pwms = <&pwm1 0 10000000 0>;
			max-brightness = <255>;
		};

		led-1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <1>;
			pwms = <&pwm3 0 10000000 0>;
			max-brightness = <255>;
		};

		led-2 {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <2>;
			pwms = <&pwm5 0 10000000 0>;
			max-brightness = <255>;
			linux,default-trigger = "heartbeat";
		};
	};

	/* On board name LED_RGB2 */
	led-controller-2 {
		compatible = "pwm-leds";

		led-3 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <3>;
			pwms = <&pwm2 0 10000000 0>;
			max-brightness = <255>;
		};

		led-4 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <4>;
			pwms = <&pwm4 0 10000000 0>;
			max-brightness = <255>;
		};

		led-5 {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <5>;
			pwms = <&pwm6 0 10000000 0>;
			max-brightness = <255>;
		};
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&reg_5v0>;
	};

	reg_5v0: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_vbus: regulator-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_vbus>;
		regulator-name = "vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&reg_5v0>;
		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
		compatible = "mmc-pwrseq-simple";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_wifi_npd>;
		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
	};
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1>;
	status = "okay";
};

&cpu0 {
	clock-frequency = <792000000>;
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "rmii";
	phy-handle = <&ethphy0>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			reg = <0>;
			clocks = <&clks IMX6UL_CLK_ENET_REF>;
			clock-names = "rmii-ref";
			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
			reset-assert-us = <10000>;
			reset-deassert-us = <300>;
		};
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	clock-frequency = <100000>;
	status = "okay";
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	clock-frequency = <100000>;
	status = "okay";

	rtc@51 {
		compatible = "nxp,pcf8563";
		reg = <0x51>;
	};
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm2>;
	status = "okay";
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	status = "okay";
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	status = "okay";
};

&pwm5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm5>;
	status = "okay";
};

&pwm6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm6>;
	status = "okay";
};

&snvs_rtc {
	status = "disabled";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
	uart-has-rtscts;
	status = "okay";
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	vbus-supply = <&reg_vbus>;
	dr_mode = "host";
	over-current-active-low;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	vmmc-supply = <&reg_3v3>;
	bus-width = <8>;
	no-1-8-v;
	non-removable;
	cap-mmc-hw-reset;
	no-sd;
	no-sdio;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
	bus-width = <4>;
	no-1-8-v;
	no-mmc;
	no-sd;
	non-removable;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	wifi@1 {
		compatible = "brcm,bcm4329-fmac";
		reg = <1>;
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	pinctrl_can1: can1grp {
		fsl,pins = <
			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
		>;
	};

	pinctrl_enet1: enet1grp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031

			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
		>;
	};

	pinctrl_hog: hoggrp {
		fsl,pins = <
			/* HW Revision */
			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0

			/* HW ID */
			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0

			/* Digital inputs */
			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000

			/* Isolated outputs */
			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
		>;
	};

	pinctrl_pwm2: pwm2grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
		>;
	};

	pinctrl_pwm3: pwm3grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
		>;
	};

	pinctrl_pwm4: pwm4grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
		>;
	};

	pinctrl_pwm5: pwm5grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
		>;
	};

	pinctrl_pwm6: pwm6grp {
		fsl,pins = <
			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
		>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <
			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
		>;
	};

	pinctrl_usbotg1: usbotg1grp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
		>;
	};

	pinctrl_vbus: vbus0grp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
		>;
	};

	pinctrl_wifi_npd: wifigrp {
		fsl,pins = <
			/* WL_REG_ON */
			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
		>;
	};
};

&iomuxc_snvs {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_snvs_hog>;

	pinctrl_snvs_hog: snvs-hog-grp {
		fsl,pins = <
			/* Digital outputs */
			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020

			/* Digital outputs fault feedback */
			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
		>;
	};
};