1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Veyron Pinky Rev 2 board device tree source
*
* Copyright 2015 Google, Inc
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
#include "../cros-ec-sbs.dtsi"
/ {
model = "Google Pinky";
compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
"google,veyron", "rockchip,rk3288";
/delete-node/backlight-regulator;
/delete-node/panel-regulator;
/delete-node/emmc-pwrseq;
/delete-node/vcc18-lcd;
};
&backlight {
/delete-property/power-supply;
};
&emmc {
/*
* Use a pullup instead of a drive since the output is 3.3V and
* really should be 1.8V (oops). The external pulldown will help
* bring the voltage down if we only drive with a pullup here.
* Therefore disable the powerseq (and actual reset) for pinky.
*/
/delete-property/mmc-pwrseq;
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
};
&edp {
/delete-property/pinctrl-names;
/delete-property/pinctrl-0;
force-hpd;
};
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
/* Touchpad connector */
&i2c3 {
status = "okay";
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
};
&panel {
power-supply = <&vcc33_lcd>;
};
&pinctrl {
pinctrl-names = "default", "sleep";
pinctrl-0 = <
/* Common for sleep and wake, but no owners */
&ddr0_retention
&ddrio_pwroff
&global_pwroff
/* Wake only */
&suspend_l_wake
&bt_dev_wake_awake
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
&ddr0_retention
&ddrio_pwroff
&global_pwroff
/* Sleep only */
&suspend_l_sleep
&bt_dev_wake_sleep
>;
/delete-node/ lcd;
backlight {
/delete-node/ bl_pwr_en;
};
buttons {
pwr_key_h: pwr-key-h {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_wp_pin: sdmmc-wp-pin {
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&rk808 {
regulators {
vcc18_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc18_lcd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
&sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
&sdmmc_wp_pin &sdmmc_bus4>;
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
&tsadc {
/* Some connection is flaky making the tsadc hang the system */
status = "disabled";
};
|
