summaryrefslogtreecommitdiffstats
path: root/arch/arm/include/debug/brcmstb.S
blob: 3f7d68740ed4c9982875e13d6fe05e410bc612a4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
/* SPDX-License-Identifier: GPL-2.0-only */
/* Copyright (C) 2016 Broadcom */
#include <linux/serial_reg.h>
#include <asm/cputype.h>

/* Physical register offset and virtual register offset */
#define REG_PHYS_BASE		0xf0000000
#define REG_PHYS_BASE_V7	0x08000000
#define REG_VIRT_BASE		0xfc000000
#define REG_PHYS_ADDR(x)	((x) + REG_PHYS_BASE)
#define REG_PHYS_ADDR_V7(x)	((x) + REG_PHYS_BASE_V7)

/* Product id can be read from here */
#define SUN_TOP_CTRL_BASE	REG_PHYS_ADDR(0x404000)
#define SUN_TOP_CTRL_BASE_V7	REG_PHYS_ADDR_V7(0x404000)

#define UARTA_3390		REG_PHYS_ADDR(0x40a900)
#define UARTA_72116		UARTA_7255
#define UARTA_7250		REG_PHYS_ADDR(0x40b400)
#define UARTA_7255		REG_PHYS_ADDR(0x40c000)
#define UARTA_7260		UARTA_7255
#define UARTA_7268		UARTA_7255
#define UARTA_7271		UARTA_7268
#define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
#define UARTA_7216		UARTA_7278
#define UARTA_72164		UARTA_7278
#define UARTA_72165		UARTA_7278
#define UARTA_7364		REG_PHYS_ADDR(0x40b000)
#define UARTA_7366		UARTA_7364
#define UARTA_74165		UARTA_7278
#define UARTA_74371		REG_PHYS_ADDR(0x406b00)
#define UARTA_7439		REG_PHYS_ADDR(0x40a900)
#define UARTA_7445		REG_PHYS_ADDR(0x40ab00)

#define UART_SHIFT		2

#define checkuart(rp, rv, family_id, family) \
		/* Load family id */ \
		ldr	rp, =family_id ; \
		/* Compare SUN_TOP_CTRL value against it */ \
		cmp	rp, rv ; \
		/* Passed test, load address */ \
		ldreq	rp, =UARTA_##family ; \
		/* Jump to save UART address */ \
		beq	91f

		.macro  addruart, rp, rv, tmp
		adr	\rp, 99f		@ actual addr of 99f
		ldr	\rv, [\rp]		@ linked addr is stored there
		sub	\rv, \rv, \rp		@ offset between the two
		ldr	\rp, [\rp, #4]		@ linked brcmstb_uart_config
		sub	\tmp, \rp, \rv		@ actual brcmstb_uart_config
		ldr	\rp, [\tmp]		@ Load brcmstb_uart_config
		cmp	\rp, #1			@ needs initialization?
		bne	100f			@ no; go load the addresses
		mov	\rv, #0			@ yes; record init is done
		str	\rv, [\tmp]

		/* Check for V7 memory map if B53 */
		mrc	p15, 0, \rv, c0, c0, 0	@ get Main ID register
		ldr	\rp, =ARM_CPU_PART_MASK
		and	\rv, \rv, \rp
		ldr	\rp, =ARM_CPU_PART_BRAHMA_B53	@ check for B53 CPU
		cmp	\rv, \rp
		bne	10f

		/* if PERIPHBASE doesn't overlap REG_PHYS_BASE use V7 map */
		mrc	p15, 1, \rv, c15, c3, 0	@ get PERIPHBASE from CBAR
		ands	\rv, \rv, #REG_PHYS_BASE
		ldreq	\rp, =SUN_TOP_CTRL_BASE_V7

		/* Check SUN_TOP_CTRL base */
10:		ldrne	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
		ldr	\rv, [\rp, #0]		@ get register contents
ARM_BE8(	rev	\rv, \rv )
		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]

		/* Chip specific detection starts here */
20:		checkuart(\rp, \rv, 0x33900000, 3390)
21:		checkuart(\rp, \rv, 0x07211600, 72116)
22:		checkuart(\rp, \rv, 0x72160000, 7216)
23:		checkuart(\rp, \rv, 0x07216400, 72164)
24:		checkuart(\rp, \rv, 0x07216500, 72165)
25:		checkuart(\rp, \rv, 0x72500000, 7250)
26:		checkuart(\rp, \rv, 0x72550000, 7255)
27:		checkuart(\rp, \rv, 0x72600000, 7260)
28:		checkuart(\rp, \rv, 0x72680000, 7268)
29:		checkuart(\rp, \rv, 0x72710000, 7271)
30:		checkuart(\rp, \rv, 0x72780000, 7278)
31:		checkuart(\rp, \rv, 0x73640000, 7364)
32:		checkuart(\rp, \rv, 0x73660000, 7366)
33:		checkuart(\rp, \rv, 0x07416500, 74165)
34:		checkuart(\rp, \rv, 0x07437100, 74371)
35:		checkuart(\rp, \rv, 0x74390000, 7439)
36:		checkuart(\rp, \rv, 0x74450000, 7445)

		/* No valid UART found */
90:		mov	\rp, #0
		/* fall through */

		/* Record whichever UART we chose */
91:		str	\rp, [\tmp, #4]		@ Store in brcmstb_uart_phys
		cmp	\rp, #0			@ Valid UART address?
		bne	92f			@ Yes, go process it
		str	\rp, [\tmp, #8]		@ Store 0 in brcmstb_uart_virt
		b	100f			@ Done
92:		and     \rv, \rp, #0xffffff	@ offset within 16MB section
		add	\rv, \rv, #REG_VIRT_BASE
		str	\rv, [\tmp, #8]		@ Store in brcmstb_uart_virt
		b	100f

		.align
99:		.word	.
		.word	brcmstb_uart_config
		.ltorg

		/* Load previously selected UART address */
100:		ldr	\rp, [\tmp, #4]		@ Load brcmstb_uart_phys
		ldr	\rv, [\tmp, #8]		@ Load brcmstb_uart_virt
		.endm

		.macro	store, rd, rx:vararg
ARM_BE8(	rev	\rd, \rd )
		str	\rd, \rx
		.endm

		.macro	load, rd, rx:vararg
		ldr	\rd, \rx
ARM_BE8(	rev	\rd, \rd )
		.endm

		.macro	senduart,rd,rx
		store	\rd, [\rx, #UART_TX << UART_SHIFT]
		.endm

		.macro	busyuart,rd,rx
1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
		bne	1002b
		.endm

		.macro	waituarttxrdy,rd,rx
		.endm

		.macro	waituartcts,rd,rx
		.endm

/*
 * Storage for the state maintained by the macros above.
 *
 * In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
 * That's because this header is included from multiple files, and we only
 * want a single copy of the data. In particular, the UART probing code above
 * assumes it's running using physical addresses. This is true when this file
 * is included from head.o, but not when included from debug.o. So we need
 * to share the probe results between the two copies, rather than having
 * to re-run the probing again later.
 *
 * In the decompressor, we put the symbol/storage right here, since common.c
 * isn't included in the decompressor build. This symbol gets put in .text
 * even though it's really data, since .data is discarded from the
 * decompressor. Luckily, .text is writeable in the decompressor, unless
 * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
 */
#if defined(ZIMAGE)
brcmstb_uart_config:
	/* Debug UART initialization required */
	.word 1
	/* Debug UART physical address */
	.word 0
	/* Debug UART virtual address */
	.word 0
#endif