1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
/dts-v1/;
#include "imx8mn-tqma8mqnl.dtsi"
#include "mba8mx.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
mmc0 = &usdhc3;
mmc1 = &usdhc2;
mmc2 = &usdhc1;
rtc0 = &pcf85063;
rtc1 = &snvs_rtc;
};
reg_usdhc2_vmmc: regulator-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
off-on-delay-us = <12000>;
};
};
/* Located on TQMa8MxML-ADAP */
&gpio2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0hub_sel>;
sel-usb-hub-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&i2c1 {
expander2: gpio@27 {
compatible = "nxp,pca9555";
reg = <0x27>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <®_vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_expander2>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&sai3 {
assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
<&clk IMX8MN_AUDIO_PLL2_OUT>;
};
&tlv320aic3x04 {
clock-names = "mclk";
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
};
&usbotg1 {
dr_mode = "host";
disable-over-current;
power-active-high;
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000146>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000146>;
};
pinctrl_expander2: expander2grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002>,
<MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002>,
<MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14>,
<MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14>,
<MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14>,
<MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14>,
<MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90>,
<MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90>,
<MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90>,
<MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90>,
<MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14>,
<MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90>,
<MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90>,
<MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14>;
};
pinctrl_gpiobutton: gpiobuttongrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84>,
<MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84>,
<MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x84>;
};
pinctrl_gpioled: gpioledgrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84>,
<MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x84>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001C4>,
<MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001C4>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001C4>,
<MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001C4>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001C4>,
<MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001C4>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001C4>,
<MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001C4>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94>,
<MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94>,
<MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94>,
<MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94>,
<MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94>,
<MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94>,
<MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16>;
};
pinctrl_usb0hub_sel: usb0hub-selgrp {
/* SEL_USB_HUB_B */
fsl,pins = <MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x84>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>,
<MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>,
<MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84>;
};
};
|
