1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
* Based on 83xx/mpc8360e_pb.c by:
* Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC85xx MDS board specific routines.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/fsl_devices.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy.h>
#include <linux/memblock.h>
#include <linux/fsl/guts.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include "smp.h"
#include "mpc85xx.h"
#if IS_BUILTIN(CONFIG_PHYLIB)
#define MV88E1111_SCR 0x10
#define MV88E1111_SCR_125CLK 0x0010
static int mpc8568_fixup_125_clock(struct phy_device *phydev)
{
int scr;
int err;
/* Workaround for the 125 CLK Toggle */
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
if (err)
return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err)
return err;
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
return err;
}
static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
{
int temp;
int err;
/* Errata */
err = phy_write(phydev,29, 0x0006);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = (temp & (~0x8000)) | 0x4000;
err = phy_write(phydev,30, temp);
if (err)
return err;
err = phy_write(phydev,29, 0x000a);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp &= ~0x0020;
err = phy_write(phydev,30,temp);
if (err)
return err;
/* Disable automatic MDI/MDIX selection */
temp = phy_read(phydev, 16);
if (temp < 0)
return temp;
temp &= ~0x0060;
err = phy_write(phydev,16,temp);
return err;
}
#endif
/* ************************************************************************
*
* Setup the architecture
*
*/
#ifdef CONFIG_QUICC_ENGINE
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
static u8 __iomem *bcsr_regs;
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (!np)
return;
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
if (!bcsr_regs)
return;
if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
/* Turn off UCC1 & UCC2 */
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
/* Mode is RGMII, all bits clear */
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
BCSR_UCC2_MODE_MSK);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
} else if (machine_is(mpc8569_mds)) {
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
#define BCSR_UCC_RGMII (0x1 << 6)
#define BCSR_UCC_RTBI (0x1 << 5)
/*
* U-Boot mangles interrupt polarity for Marvell PHYs,
* so reset built-in and UEM Marvell PHYs, this puts
* the PHYs into their normal state.
*/
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
for_each_compatible_node(np, "network", "ucc_geth") {
const unsigned int *prop;
int ucc_num;
prop = of_get_property(np, "cell-index", NULL);
if (prop == NULL)
continue;
ucc_num = *prop - 1;
prop = of_get_property(np, "phy-connection-type", NULL);
if (prop == NULL)
continue;
if (strcmp("rtbi", (const char *)prop) == 0)
clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
iounmap(bcsr_regs);
}
static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
mpc85xx_qe_par_io_init();
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
struct ccsr_guts __iomem *guts;
np = of_find_node_by_name(NULL, "global-utilities");
if (np) {
guts = of_iomap(np, 0);
if (!guts)
pr_err("mpc85xx-rdb: could not map global utilities register\n");
else{
/* P1021 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management signals in PMUXCR
* register.
*/
setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
MPC85xx_PMUXCR_QE(3) |
MPC85xx_PMUXCR_QE(9) |
MPC85xx_PMUXCR_QE(12));
iounmap(guts);
}
of_node_put(np);
}
}
}
#else
static void __init mpc85xx_mds_qe_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
mpc85xx_smp_init();
mpc85xx_mds_qe_init();
fsl_pci_assign_primary();
swiotlb_detect_4g();
}
#if IS_BUILTIN(CONFIG_PHYLIB)
static int __init board_fixups(void)
{
char phy_id[20];
char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
struct device_node *mdio;
struct resource res;
int i;
for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
of_address_to_resource(mdio, 0, &res);
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 1);
phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
/* Register a workaround for errata */
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 7);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
of_node_put(mdio);
}
return 0;
}
machine_arch_initcall(mpc8568_mds, board_fixups);
machine_arch_initcall(mpc8569_mds, board_fixups);
#endif
static int __init mpc85xx_publish_devices(void)
{
return mpc85xx_common_publish_devices();
}
machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
}
define_machine(mpc8568_mds) {
.name = "MPC8568 MDS",
.compatible = "MPC85xxMDS",
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
};
define_machine(mpc8569_mds) {
.name = "MPC8569 MDS",
.compatible = "fsl,MPC8569EMDS",
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
};
define_machine(p1021_mds) {
.name = "P1021 MDS",
.compatible = "fsl,P1021MDS",
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
};
|
