1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
|
// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright (C) 2021 StarFive Technology Co., Ltd.
* Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
*/
/dts-v1/;
#include <dt-bindings/clock/starfive-jh7100.h>
#include <dt-bindings/reset/starfive-jh7100.h>
/ {
compatible = "starfive,jh7100";
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
U74_0: cpu@0 {
compatible = "sifive,u74-mc", "riscv";
reg = <0>;
d-cache-block-size = <64>;
d-cache-sets = <64>;
d-cache-size = <32768>;
d-tlb-sets = <1>;
d-tlb-size = <32>;
device_type = "cpu";
i-cache-block-size = <64>;
i-cache-sets = <64>;
i-cache-size = <32768>;
i-tlb-sets = <1>;
i-tlb-size = <32>;
mmu-type = "riscv,sv39";
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
"zifencei", "zihpm";
tlb-split;
cpu0_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
U74_1: cpu@1 {
compatible = "sifive,u74-mc", "riscv";
reg = <1>;
d-cache-block-size = <64>;
d-cache-sets = <64>;
d-cache-size = <32768>;
d-tlb-sets = <1>;
d-tlb-size = <32>;
device_type = "cpu";
i-cache-block-size = <64>;
i-cache-sets = <64>;
i-cache-size = <32768>;
i-tlb-sets = <1>;
i-tlb-size = <32>;
mmu-type = "riscv,sv39";
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
"zifencei", "zihpm";
tlb-split;
cpu1_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&U74_0>;
};
core1 {
cpu = <&U74_1>;
};
};
};
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <15000>;
thermal-sensors = <&sfctemp>;
trips {
cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu-crit {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
osc_sys: osc-sys {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "osc_sys";
/* This value must be overridden by the board */
clock-frequency = <0>;
};
osc_aud: osc-aud {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "osc_aud";
/* This value must be overridden by the board */
clock-frequency = <0>;
};
gmac_rmii_ref: gmac-rmii-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "gmac_rmii_ref";
/* Should be overridden by the board when needed */
clock-frequency = <0>;
};
gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "gmac_gr_mii_rxclk";
/* Should be overridden by the board when needed */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
#address-cells = <2>;
#size-cells = <2>;
dma-noncoherent;
ranges;
clint: clint@2000000 {
compatible = "starfive,jh7100-clint", "sifive,clint0";
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
<&cpu1_intc 3>, <&cpu1_intc 7>;
};
ccache: cache-controller@2010000 {
compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache";
reg = <0x0 0x2010000 0x0 0x1000>;
interrupts = <128>, <130>, <131>, <129>;
cache-block-size = <64>;
cache-level = <2>;
cache-sets = <2048>;
cache-size = <2097152>;
cache-unified;
};
plic: interrupt-controller@c000000 {
compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
reg = <0x0 0xc000000 0x0 0x4000000>;
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
<&cpu1_intc 11>, <&cpu1_intc 9>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
riscv,ndev = <133>;
};
sdio0: mmc@10000000 {
compatible = "snps,dw-mshc";
reg = <0x0 0x10000000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_SDIO0_AHB>,
<&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>;
clock-names = "biu", "ciu";
interrupts = <4>;
data-addr = <0>;
fifo-depth = <32>;
fifo-watermark-aligned;
status = "disabled";
};
sdio1: mmc@10010000 {
compatible = "snps,dw-mshc";
reg = <0x0 0x10010000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_SDIO1_AHB>,
<&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>;
clock-names = "biu", "ciu";
interrupts = <5>;
data-addr = <0>;
fifo-depth = <32>;
fifo-watermark-aligned;
status = "disabled";
};
gmac: ethernet@10020000 {
compatible = "starfive,jh7100-dwmac", "snps,dwmac";
reg = <0x0 0x10020000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
<&clkgen JH7100_CLK_GMAC_AHB>,
<&clkgen JH7100_CLK_GMAC_PTP_REF>,
<&clkgen JH7100_CLK_GMAC_TX_INV>,
<&clkgen JH7100_CLK_GMAC_GTX>;
clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
reset-names = "ahb";
interrupts = <6>, <7>;
interrupt-names = "macirq", "eth_wake_irq";
max-frame-size = <9000>;
snps,multicast-filter-bins = <32>;
snps,perfect-filter-entries = <128>;
starfive,syscon = <&sysmain 0x70 0>;
rx-fifo-depth = <32768>;
tx-fifo-depth = <16384>;
snps,axi-config = <&stmmac_axi_setup>;
snps,fixed-burst;
snps,force_thresh_dma_mode;
status = "disabled";
stmmac_axi_setup: stmmac-axi-config {
snps,wr_osr_lmt = <16>;
snps,rd_osr_lmt = <16>;
snps,blen = <256 128 64 32 0 0 0>;
};
};
clkgen: clock-controller@11800000 {
compatible = "starfive,jh7100-clkgen";
reg = <0x0 0x11800000 0x0 0x10000>;
clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
#clock-cells = <1>;
};
rstgen: reset-controller@11840000 {
compatible = "starfive,jh7100-reset";
reg = <0x0 0x11840000 0x0 0x10000>;
#reset-cells = <1>;
};
sysmain: syscon@11850000 {
compatible = "starfive,jh7100-sysmain", "syscon";
reg = <0x0 0x11850000 0x0 0x10000>;
};
i2c0: i2c@118b0000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x118b0000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_I2C0_CORE>,
<&clkgen JH7100_CLK_I2C0_APB>;
clock-names = "ref", "pclk";
resets = <&rstgen JH7100_RSTN_I2C0_APB>;
interrupts = <96>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@118c0000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x118c0000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_I2C1_CORE>,
<&clkgen JH7100_CLK_I2C1_APB>;
clock-names = "ref", "pclk";
resets = <&rstgen JH7100_RSTN_I2C1_APB>;
interrupts = <97>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gpio: pinctrl@11910000 {
compatible = "starfive,jh7100-pinctrl";
reg = <0x0 0x11910000 0x0 0x10000>,
<0x0 0x11858000 0x0 0x1000>;
reg-names = "gpio", "padctl";
clocks = <&clkgen JH7100_CLK_GPIO_APB>;
resets = <&rstgen JH7100_RSTN_GPIO_APB>;
interrupts = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart2: serial@12430000 {
compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
reg = <0x0 0x12430000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_UART2_CORE>,
<&clkgen JH7100_CLK_UART2_APB>;
clock-names = "baudclk", "apb_pclk";
resets = <&rstgen JH7100_RSTN_UART2_APB>;
interrupts = <72>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart3: serial@12440000 {
compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
reg = <0x0 0x12440000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_UART3_CORE>,
<&clkgen JH7100_CLK_UART3_APB>;
clock-names = "baudclk", "apb_pclk";
resets = <&rstgen JH7100_RSTN_UART3_APB>;
interrupts = <73>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
i2c2: i2c@12450000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x12450000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_I2C2_CORE>,
<&clkgen JH7100_CLK_I2C2_APB>;
clock-names = "ref", "pclk";
resets = <&rstgen JH7100_RSTN_I2C2_APB>;
interrupts = <74>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@12460000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x12460000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_I2C3_CORE>,
<&clkgen JH7100_CLK_I2C3_APB>;
clock-names = "ref", "pclk";
resets = <&rstgen JH7100_RSTN_I2C3_APB>;
interrupts = <75>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
watchdog@12480000 {
compatible = "starfive,jh7100-wdt";
reg = <0x0 0x12480000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_WDTIMER_APB>,
<&clkgen JH7100_CLK_WDT_CORE>;
clock-names = "apb", "core";
resets = <&rstgen JH7100_RSTN_WDTIMER_APB>,
<&rstgen JH7100_RSTN_WDT>;
};
pwm: pwm@12490000 {
compatible = "starfive,jh7100-pwm", "opencores,pwm-v1";
reg = <0x0 0x12490000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_PWM_APB>;
resets = <&rstgen JH7100_RSTN_PWM_APB>;
#pwm-cells = <3>;
status = "disabled";
};
sfctemp: temperature-sensor@124a0000 {
compatible = "starfive,jh7100-temp";
reg = <0x0 0x124a0000 0x0 0x10000>;
clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
<&clkgen JH7100_CLK_TEMP_APB>;
clock-names = "sense", "bus";
resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
<&rstgen JH7100_RSTN_TEMP_APB>;
reset-names = "sense", "bus";
#thermal-sensor-cells = <0>;
};
};
};
|
