path: root/debian/patches-rt/0047-serial-8250-Switch-to-nbcon-console.patch

From: John Ogness <john.ogness@linutronix.de>
Date: Wed, 13 Sep 2023 15:30:36 +0000
Subject: [PATCH 47/48] serial: 8250: Switch to nbcon console
Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/6.10/older/patches-6.10.2-rt14.tar.xz

Implement the necessary callbacks to switch the 8250 console driver
to perform as an nbcon console.

Add implementations for the nbcon console callbacks (write_atomic,
write_thread, device_lock, device_unlock) and add CON_NBCON to the
initial flags.

The legacy code is kept in order to easily switch back to legacy mode
by defining CONFIG_SERIAL_8250_LEGACY_CONSOLE.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/tty/serial/8250/8250_core.c |   42 +++++++++
 drivers/tty/serial/8250/8250_port.c |  154 +++++++++++++++++++++++++++++++++++-
 include/linux/serial_8250.h         |    6 +
 3 files changed, 199 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -589,6 +589,7 @@ serial8250_register_ports(struct uart_dr
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
 static void univ8250_console_write(struct console *co, const char *s,
 				   unsigned int count)
 {
@@ -596,6 +597,37 @@ static void univ8250_console_write(struc
 
 	serial8250_console_write(up, s, count);
 }
+#else
+static void univ8250_console_write_atomic(struct console *co,
+					  struct nbcon_write_context *wctxt)
+{
+	struct uart_8250_port *up = &serial8250_ports[co->index];
+
+	serial8250_console_write_atomic(up, wctxt);
+}
+
+static void univ8250_console_write_thread(struct console *co,
+					  struct nbcon_write_context *wctxt)
+{
+	struct uart_8250_port *up = &serial8250_ports[co->index];
+
+	serial8250_console_write_thread(up, wctxt);
+}
+
+static void univ8250_console_device_lock(struct console *con, unsigned long *flags)
+{
+	struct uart_port *up = &serial8250_ports[con->index].port;
+
+	__uart_port_lock_irqsave(up, flags);
+}
+
+static void univ8250_console_device_unlock(struct console *con, unsigned long flags)
+{
+	struct uart_port *up = &serial8250_ports[con->index].port;
+
+	__uart_port_unlock_irqrestore(up, flags);
+}
+#endif /* CONFIG_SERIAL_8250_LEGACY_CONSOLE */
 
 static int univ8250_console_setup(struct console *co, char *options)
 {
@@ -695,12 +727,20 @@ static int univ8250_console_match(struct
 
 static struct console univ8250_console = {
 	.name		= "ttyS",
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
 	.write		= univ8250_console_write,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
+#else
+	.write_atomic	= univ8250_console_write_atomic,
+	.write_thread	= univ8250_console_write_thread,
+	.device_lock	= univ8250_console_device_lock,
+	.device_unlock	= univ8250_console_device_unlock,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME | CON_NBCON,
+#endif
 	.device		= uart_console_device,
 	.setup		= univ8250_console_setup,
 	.exit		= univ8250_console_exit,
 	.match		= univ8250_console_match,
-	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
 	.index		= -1,
 	.data		= &serial8250_reg,
 };
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -546,6 +546,13 @@ static int serial8250_em485_init(struct
 	if (!p->em485)
 		return -ENOMEM;
 
+#ifndef CONFIG_SERIAL_8250_LEGACY_CONSOLE
+	if (uart_console(&p->port)) {
+		dev_warn(p->port.dev, "no atomic printing for rs485 consoles\n");
+		p->port.cons->write_atomic = NULL;
+	}
+#endif
+
 	hrtimer_init(&p->em485->stop_tx_timer, CLOCK_MONOTONIC,
 		     HRTIMER_MODE_REL);
 	hrtimer_init(&p->em485->start_tx_timer, CLOCK_MONOTONIC,
@@ -691,7 +698,11 @@ static void serial8250_set_sleep(struct
 	serial8250_rpm_put(p);
 }
 
-static void serial8250_clear_IER(struct uart_8250_port *up)
+/*
+ * Only to be used by write_atomic() and the legacy write(), which do not
+ * require port lock.
+ */
+static void __serial8250_clear_IER(struct uart_8250_port *up)
 {
 	if (up->capabilities & UART_CAP_UUE)
 		serial_out(up, UART_IER, UART_IER_UUE);
@@ -699,6 +710,11 @@ static void serial8250_clear_IER(struct
 		serial_out(up, UART_IER, 0);
 }
 
+static inline void serial8250_clear_IER(struct uart_8250_port *up)
+{
+	__serial8250_clear_IER(up);
+}
+
 #ifdef CONFIG_SERIAL_8250_RSA
 /*
  * Attempts to turn on the RSA FIFO.  Returns zero on failure.
@@ -3269,6 +3285,11 @@ static void serial8250_console_putchar(s
 
 	wait_for_xmitr(up, UART_LSR_THRE);
 	serial_port_out(port, UART_TX, ch);
+
+	if (ch == '\n')
+		up->console_newline_needed = false;
+	else
+		up->console_newline_needed = true;
 }
 
 /*
@@ -3297,6 +3318,7 @@ static void serial8250_console_restore(s
 	serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
 }
 
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
 /*
  * Print a string to the serial port using the device FIFO
  *
@@ -3355,7 +3377,7 @@ void serial8250_console_write(struct uar
 	 *	First save the IER then disable the interrupts
 	 */
 	ier = serial_port_in(port, UART_IER);
-	serial8250_clear_IER(up);
+	__serial8250_clear_IER(up);
 
 	/* check scratch reg to see if port powered off during system sleep */
 	if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
@@ -3421,6 +3443,131 @@ void serial8250_console_write(struct uar
 	if (locked)
 		uart_port_unlock_irqrestore(port, flags);
 }
+#else
+void serial8250_console_write_thread(struct uart_8250_port *up,
+				     struct nbcon_write_context *wctxt)
+{
+	struct uart_8250_em485 *em485 = up->em485;
+	struct uart_port *port = &up->port;
+	unsigned int ier;
+
+	touch_nmi_watchdog();
+
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
+
+	/* First save IER then disable the interrupts. */
+	ier = serial_port_in(port, UART_IER);
+	serial8250_clear_IER(up);
+
+	/* Check scratch reg if port powered off during system sleep. */
+	if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+		serial8250_console_restore(up);
+		up->canary = 0;
+	}
+
+	if (em485) {
+		if (em485->tx_stopped)
+			up->rs485_start_tx(up);
+		mdelay(port->rs485.delay_rts_before_send);
+	}
+
+	if (nbcon_exit_unsafe(wctxt)) {
+		int len = READ_ONCE(wctxt->len);
+		int i;
+
+		/*
+		 * Write out the message. Toggle unsafe for each byte in order
+		 * to give another (higher priority) context the opportunity
+		 * for a friendly takeover. If such a takeover occurs, this
+		 * context must reacquire ownership in order to perform final
+		 * actions (such as re-enabling the interrupts).
+		 *
+		 * IMPORTANT: wctxt->outbuf and wctxt->len are no longer valid
+		 *	      after a reacquire so writing the message must be
+		 *	      aborted.
+		 */
+		for (i = 0; i < len; i++) {
+			if (!nbcon_enter_unsafe(wctxt)) {
+				nbcon_reacquire(wctxt);
+				break;
+			}
+
+			uart_console_write(port, wctxt->outbuf + i, 1, serial8250_console_putchar);
+
+			if (!nbcon_exit_unsafe(wctxt)) {
+				nbcon_reacquire(wctxt);
+				break;
+			}
+		}
+	} else {
+		nbcon_reacquire(wctxt);
+	}
+
+	while (!nbcon_enter_unsafe(wctxt))
+		nbcon_reacquire(wctxt);
+
+	/* Finally, wait for transmitter to become empty and restore IER. */
+	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+	if (em485) {
+		mdelay(port->rs485.delay_rts_after_send);
+		if (em485->tx_stopped)
+			up->rs485_stop_tx(up);
+	}
+	serial_port_out(port, UART_IER, ier);
+
+	/*
+	 * The receive handling will happen properly because the receive ready
+	 * bit will still be set; it is not cleared on read.  However, modem
+	 * control will not, we must call it if we have saved something in the
+	 * saved flags while processing with interrupts off.
+	 */
+	if (up->msr_saved_flags)
+		serial8250_modem_status(up);
+
+	nbcon_exit_unsafe(wctxt);
+}
+
+void serial8250_console_write_atomic(struct uart_8250_port *up,
+				     struct nbcon_write_context *wctxt)
+{
+	struct uart_port *port = &up->port;
+	unsigned int ier;
+
+	/* Atomic console not supported for rs485 mode. */
+	if (WARN_ON_ONCE(up->em485))
+		return;
+
+	touch_nmi_watchdog();
+
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
+
+	/*
+	 * First save IER then disable the interrupts. The special variant to
+	 * clear IER is used because atomic printing may occur without holding
+	 * the port lock.
+	 */
+	ier = serial_port_in(port, UART_IER);
+	__serial8250_clear_IER(up);
+
+	/* Check scratch reg if port powered off during system sleep. */
+	if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+		serial8250_console_restore(up);
+		up->canary = 0;
+	}
+
+	if (up->console_newline_needed)
+		uart_console_write(port, "\n", 1, serial8250_console_putchar);
+	uart_console_write(port, wctxt->outbuf, wctxt->len, serial8250_console_putchar);
+
+	/* Finally, wait for transmitter to become empty and restore IER. */
+	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+	serial_port_out(port, UART_IER, ier);
+
+	nbcon_exit_unsafe(wctxt);
+}
+#endif /* CONFIG_SERIAL_8250_LEGACY_CONSOLE */
 
 static unsigned int probe_baud(struct uart_port *port)
 {
@@ -3439,6 +3586,7 @@ static unsigned int probe_baud(struct ua
 
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
@@ -3448,6 +3596,8 @@ int serial8250_console_setup(struct uart
 	if (!port->iobase && !port->membase)
 		return -ENODEV;
 
+	up->console_newline_needed = false;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else if (probe)
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -153,6 +153,8 @@ struct uart_8250_port {
 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
 	unsigned char		msr_saved_flags;
 
+	bool			console_newline_needed;
+
 	struct uart_8250_dma	*dma;
 	const struct uart_8250_ops *ops;
 
@@ -204,6 +206,10 @@ void serial8250_init_port(struct uart_82
 void serial8250_set_defaults(struct uart_8250_port *up);
 void serial8250_console_write(struct uart_8250_port *up, const char *s,
 			      unsigned int count);
+void serial8250_console_write_atomic(struct uart_8250_port *up,
+				     struct nbcon_write_context *wctxt);
+void serial8250_console_write_thread(struct uart_8250_port *up,
+				     struct nbcon_write_context *wctxt);
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 int serial8250_console_exit(struct uart_port *port);