summaryrefslogtreecommitdiffstats
path: root/drivers/input/joystick/xpad.c
blob: d0bb3edfd0a0996ce5a9a82ca4c5d6a4ccbe7d05 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Xbox gamepad driver
 *
 * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
 *               2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
 *                    Steven Toth <steve@toth.demon.co.uk>,
 *                    Franz Lehner <franz@caos.at>,
 *                    Ivan Hawkes <blackhawk@ivanhawkes.com>
 *               2005 Dominic Cerquetti <binary1230@yahoo.com>
 *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
 *               2007 Jan Kratochvil <honza@jikos.cz>
 *               2010 Christoph Fritz <chf.fritz@googlemail.com>
 *
 * This driver is based on:
 *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
 *  - the iForce driver    drivers/char/joystick/iforce.c
 *  - the skeleton-driver  drivers/usb/usb-skeleton.c
 *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
 *  - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
 *
 * Thanks to:
 *  - ITO Takayuki for providing essential xpad information on his website
 *  - Vojtech Pavlik     - iforce driver / input subsystem
 *  - Greg Kroah-Hartman - usb-skeleton driver
 *  - Xbox Linux project - extra USB IDs
 *  - Pekka Pöyry (quantus) - Xbox One controller reverse-engineering
 *
 * TODO:
 *  - fine tune axes (especially trigger axes)
 *  - fix "analog" buttons (reported as digital now)
 *  - get rumble working
 *  - need USB IDs for other dance pads
 *
 * History:
 *
 * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
 *
 * 2002-07-02 - 0.0.2 : basic working version
 *  - all axes and 9 of the 10 buttons work (german InterAct device)
 *  - the black button does not work
 *
 * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
 *  - indentation fixes
 *  - usb + input init sequence fixes
 *
 * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
 *  - verified the lack of HID and report descriptors
 *  - verified that ALL buttons WORK
 *  - fixed d-pad to axes mapping
 *
 * 2002-07-17 - 0.0.5 : simplified d-pad handling
 *
 * 2004-10-02 - 0.0.6 : DDR pad support
 *  - borrowed from the Xbox Linux kernel
 *  - USB id's for commonly used dance pads are present
 *  - dance pads will map D-PAD to buttons, not axes
 *  - pass the module paramater 'dpad_to_buttons' to force
 *    the D-PAD to map to buttons if your pad is not detected
 *
 * Later changes can be tracked in SCM.
 */

#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
#include <linux/usb/quirks.h>

#define XPAD_PKT_LEN 64

/*
 * xbox d-pads should map to buttons, as is required for DDR pads
 * but we map them to axes when possible to simplify things
 */
#define MAP_DPAD_TO_BUTTONS		(1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
#define MAP_STICKS_TO_NULL		(1 << 2)
#define MAP_SELECT_BUTTON		(1 << 3)
#define MAP_PADDLES			(1 << 4)
#define MAP_PROFILE_BUTTON		(1 << 5)

#define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)

#define XTYPE_XBOX        0
#define XTYPE_XBOX360     1
#define XTYPE_XBOX360W    2
#define XTYPE_XBOXONE     3
#define XTYPE_UNKNOWN     4

/* Send power-off packet to xpad360w after holding the mode button for this many
 * seconds
 */
#define XPAD360W_POWEROFF_TIMEOUT 5

#define PKT_XB              0
#define PKT_XBE1            1
#define PKT_XBE2_FW_OLD     2
#define PKT_XBE2_FW_5_EARLY 3
#define PKT_XBE2_FW_5_11    4

static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");

static bool triggers_to_buttons;
module_param(triggers_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");

static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");

static bool auto_poweroff = true;
module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");

static const struct xpad_device {
	u16 idVendor;
	u16 idProduct;
	char *name;
	u8 mapping;
	u8 xtype;
} xpad_device[] = {
	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
	{ 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
	{ 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
	{ 0x03f0, 0x0495, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE },
	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
	{ 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE },
	{ 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE },
	{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
	{ 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_PROFILE_BUTTON, XTYPE_XBOXONE },
	{ 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
	{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
	{ 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
	{ 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
	{ 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
	{ 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
	{ 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
	{ 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
	{ 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
	{ 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
	{ 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
	{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
	{ 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
	{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
	{ 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
	{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
	{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
	{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
	{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
	{ 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
	{ 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a0, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a1, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a2, "PDP Wired Controller for Xbox One - Crimson Red", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a7, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a8, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02ad, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02b3, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02b8, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
	{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
	{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
	{ 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
	{ 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
	{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
	{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
	{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
	{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
	{ 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE },
	{ 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
	{ 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};

/* buttons shared with xbox and xbox360 */
static const signed short xpad_common_btn[] = {
	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
	BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
	-1						/* terminating entry */
};

/* original xbox controllers only */
static const signed short xpad_btn[] = {
	BTN_C, BTN_Z,		/* "analog" buttons */
	-1			/* terminating entry */
};

/* used when dpad is mapped to buttons */
static const signed short xpad_btn_pad[] = {
	BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2,		/* d-pad left, right */
	BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4,		/* d-pad up, down */
	-1				/* terminating entry */
};

/* used when triggers are mapped to buttons */
static const signed short xpad_btn_triggers[] = {
	BTN_TL2, BTN_TR2,		/* triggers left/right */
	-1
};

static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
	BTN_TL, BTN_TR,		/* Button LB/RB */
	BTN_MODE,		/* The big X button */
	-1
};

static const signed short xpad_abs[] = {
	ABS_X, ABS_Y,		/* left stick */
	ABS_RX, ABS_RY,		/* right stick */
	-1			/* terminating entry */
};

/* used when dpad is mapped to axes */
static const signed short xpad_abs_pad[] = {
	ABS_HAT0X, ABS_HAT0Y,	/* d-pad axes */
	-1			/* terminating entry */
};

/* used when triggers are mapped to axes */
static const signed short xpad_abs_triggers[] = {
	ABS_Z, ABS_RZ,		/* triggers left/right */
	-1
};

/* used when the controller has extra paddle buttons */
static const signed short xpad_btn_paddles[] = {
	BTN_TRIGGER_HAPPY5, BTN_TRIGGER_HAPPY6, /* paddle upper right, lower right */
	BTN_TRIGGER_HAPPY7, BTN_TRIGGER_HAPPY8, /* paddle upper left, lower left */
	-1						/* terminating entry */
};

/*
 * Xbox 360 has a vendor-specific class, so we cannot match it with only
 * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
 * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
 * wireless controllers have protocol 129.
 */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }

/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 71, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
	{ XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }

static const struct usb_device_id xpad_table[] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* Xbox USB-IF not-approved class */
	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 controller */
	XPAD_XBOX360_VENDOR(0x03eb),		/* Wooting Keyboards (Legacy) */
	XPAD_XBOXONE_VENDOR(0x03f0),		/* HP HyperX Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft Xbox 360 controllers */
	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech Xbox 360-style controllers */
	XPAD_XBOX360_VENDOR(0x056e),		/* Elecom JC-U3613M */
	XPAD_XBOX360_VENDOR(0x06a3),		/* Saitek P3600 */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz Xbox 360 controllers */
	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
	XPAD_XBOX360_VENDOR(0x07ff),		/* Mad Catz Gamepad */
	XPAD_XBOX360_VENDOR(0x0c12),		/* Zeroplus X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f Xbox 360 controllers */
	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori controllers */
	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori controllers */
	XPAD_XBOX360_VENDOR(0x1038),		/* SteelSeries controllers */
	XPAD_XBOXONE_VENDOR(0x10f5),		/* Turtle Beach Controllers */
	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
	XPAD_XBOX360_VENDOR(0x11ff),		/* PXN V900 */
	XPAD_XBOX360_VENDOR(0x1209),		/* Ardwiino Controllers */
	XPAD_XBOX360_VENDOR(0x12ab),		/* Xbox 360 dance pads */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x146b),		/* Bigben Interactive controllers */
	XPAD_XBOX360_VENDOR(0x1532),		/* Razer Sabertooth */
	XPAD_XBOXONE_VENDOR(0x1532),		/* Razer Wildcat */
	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA controllers */
	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA controllers */
	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA controllers */
	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
	XPAD_XBOX360_VENDOR(0x2dc8),            /* 8BitDo Pro 2 Wired Controller */
	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
	{ }
};

MODULE_DEVICE_TABLE(usb, xpad_table);

struct xboxone_init_packet {
	u16 idVendor;
	u16 idProduct;
	const u8 *data;
	u8 len;
};

#define XBOXONE_INIT_PKT(_vid, _pid, _data)		\
	{						\
		.idVendor	= (_vid),		\
		.idProduct	= (_pid),		\
		.data		= (_data),		\
		.len		= ARRAY_SIZE(_data),	\
	}

/*
 * starting with xbox one, the game input protocol is used
 * magic numbers are taken from
 * - https://github.com/xpadneo/gip-dissector/blob/main/src/gip-dissector.lua
 * - https://github.com/medusalix/xone/blob/master/bus/protocol.c
 */
#define GIP_CMD_ACK      0x01
#define GIP_CMD_IDENTIFY 0x04
#define GIP_CMD_POWER    0x05
#define GIP_CMD_AUTHENTICATE 0x06
#define GIP_CMD_VIRTUAL_KEY  0x07
#define GIP_CMD_RUMBLE   0x09
#define GIP_CMD_LED      0x0a
#define GIP_CMD_FIRMWARE 0x0c
#define GIP_CMD_INPUT    0x20

#define GIP_SEQ0 0x00

#define GIP_OPT_ACK      0x10
#define GIP_OPT_INTERNAL 0x20

/*
 * length of the command payload encoded with
 * https://en.wikipedia.org/wiki/LEB128
 * which is a no-op for N < 128
 */
#define GIP_PL_LEN(N) (N)

/*
 * payload specific defines
 */
#define GIP_PWR_ON 0x00
#define GIP_LED_ON 0x01

#define GIP_MOTOR_R  BIT(0)
#define GIP_MOTOR_L  BIT(1)
#define GIP_MOTOR_RT BIT(2)
#define GIP_MOTOR_LT BIT(3)
#define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT)

#define GIP_WIRED_INTF_DATA 0
#define GIP_WIRED_INTF_AUDIO 1

/*
 * This packet is required for all Xbox One pads with 2015
 * or later firmware installed (or present from the factory).
 */
static const u8 xboxone_power_on[] = {
	GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(1), GIP_PWR_ON
};

/*
 * This packet is required for Xbox One S (0x045e:0x02ea)
 * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to
 * initialize the controller that was previously used in
 * Bluetooth mode.
 */
static const u8 xboxone_s_init[] = {
	GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, 0x0f, 0x06
};

/*
 * This packet is required to get additional input data
 * from Xbox One Elite Series 2 (0x045e:0x0b00) pads.
 * We mostly do this right now to get paddle data
 */
static const u8 extra_input_packet_init[] = {
	0x4d, 0x10, 0x01, 0x02, 0x07, 0x00
};

/*
 * This packet is required for the Titanfall 2 Xbox One pads
 * (0x0e6f:0x0165) to finish initialization and for Hori pads
 * (0x0f0d:0x0067) to make the analog sticks work.
 */
static const u8 xboxone_hori_ack_id[] = {
	GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_CMD_IDENTIFY, GIP_OPT_INTERNAL, 0x3a, 0x00, 0x00, 0x00, 0x80, 0x00
};

/*
 * This packet is required for most (all?) of the PDP pads to start
 * sending input reports. These pads include: (0x0e6f:0x02ab),
 * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
 */
static const u8 xboxone_pdp_led_on[] = {
	GIP_CMD_LED, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(3), 0x00, GIP_LED_ON, 0x14
};

/*
 * This packet is required for most (all?) of the PDP pads to start
 * sending input reports. These pads include: (0x0e6f:0x02ab),
 * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
 */
static const u8 xboxone_pdp_auth[] = {
	GIP_CMD_AUTHENTICATE, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(2), 0x01, 0x00
};

/*
 * A specific rumble packet is required for some PowerA pads to start
 * sending input reports. One of those pads is (0x24c6:0x543a).
 */
static const u8 xboxone_rumblebegin_init[] = {
	GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x1D, 0x1D, 0xFF, 0x00, 0x00
};

/*
 * A rumble packet with zero FF intensity will immediately
 * terminate the rumbling required to init PowerA pads.
 * This should happen fast enough that the motors don't
 * spin up to enough speed to actually vibrate the gamepad.
 */
static const u8 xboxone_rumbleend_init[] = {
	GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

/*
 * This specifies the selection of init packets that a gamepad
 * will be sent on init *and* the order in which they will be
 * sent. The correct sequence number will be added when the
 * packet is going to be sent.
 */
static const struct xboxone_init_packet xboxone_init_packets[] = {
	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_ack_id),
	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_ack_id),
	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_power_on),
	XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
	XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on),
	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth),
	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
};

struct xpad_output_packet {
	u8 data[XPAD_PKT_LEN];
	u8 len;
	bool pending;
};

#define XPAD_OUT_CMD_IDX	0
#define XPAD_OUT_FF_IDX		1
#define XPAD_OUT_LED_IDX	(1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
#define XPAD_NUM_OUT_PACKETS	(1 + \
				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))

struct usb_xpad {
	struct input_dev *dev;		/* input device interface */
	struct input_dev __rcu *x360w_dev;
	struct usb_device *udev;	/* usb device */
	struct usb_interface *intf;	/* usb interface */

	bool pad_present;
	bool input_created;

	struct urb *irq_in;		/* urb for interrupt in report */
	unsigned char *idata;		/* input data */
	dma_addr_t idata_dma;

	struct urb *irq_out;		/* urb for interrupt out report */
	struct usb_anchor irq_out_anchor;
	bool irq_out_active;		/* we must not use an active URB */
	u8 odata_serial;		/* serial number for xbox one protocol */
	unsigned char *odata;		/* output data */
	dma_addr_t odata_dma;
	spinlock_t odata_lock;

	struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
	int last_out_packet;
	int init_seq;

#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
	struct xpad_led *led;
#endif

	char phys[64];			/* physical device path */

	int mapping;			/* map d-pad to buttons or to axes */
	int xtype;			/* type of xbox device */
	int packet_type;		/* type of the extended packet */
	int pad_nr;			/* the order x360 pads were attached */
	const char *name;		/* name of the device */
	struct work_struct work;	/* init/remove device from callback */
	time64_t mode_btn_down_ts;
};

static int xpad_init_input(struct usb_xpad *xpad);
static void xpad_deinit_input(struct usb_xpad *xpad);
static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
static void xpad360w_poweroff_controller(struct usb_xpad *xpad);

/*
 *	xpad_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem.
 *
 *	The used report descriptor was taken from ITO Takayuki's website:
 *	 http://euc.jp/periphs/xbox-controller.ja.html
 */
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev = xpad->dev;

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* left stick */
		input_report_abs(dev, ABS_X,
				 (__s16) le16_to_cpup((__le16 *)(data + 12)));
		input_report_abs(dev, ABS_Y,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));

		/* right stick */
		input_report_abs(dev, ABS_RX,
				 (__s16) le16_to_cpup((__le16 *)(data + 16)));
		input_report_abs(dev, ABS_RY,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
	}

	/* triggers left/right */
	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		input_report_key(dev, BTN_TL2, data[10]);
		input_report_key(dev, BTN_TR2, data[11]);
	} else {
		input_report_abs(dev, ABS_Z, data[10]);
		input_report_abs(dev, ABS_RZ, data[11]);
	}

	/* digital pad */
	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		/* dpad as buttons (left, right, up, down) */
		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2));
		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3));
		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0));
		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1));
	} else {
		input_report_abs(dev, ABS_HAT0X,
				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
		input_report_abs(dev, ABS_HAT0Y,
				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
	}

	/* start/back buttons and stick press left/right */
	input_report_key(dev, BTN_START,  data[2] & BIT(4));
	input_report_key(dev, BTN_SELECT, data[2] & BIT(5));
	input_report_key(dev, BTN_THUMBL, data[2] & BIT(6));
	input_report_key(dev, BTN_THUMBR, data[2] & BIT(7));

	/* "analog" buttons A, B, X, Y */
	input_report_key(dev, BTN_A, data[4]);
	input_report_key(dev, BTN_B, data[5]);
	input_report_key(dev, BTN_X, data[6]);
	input_report_key(dev, BTN_Y, data[7]);

	/* "analog" buttons black, white */
	input_report_key(dev, BTN_C, data[8]);
	input_report_key(dev, BTN_Z, data[9]);


	input_sync(dev);
}

/*
 *	xpad360_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem. It is version for xbox 360 controller
 *
 *	The used report descriptor was taken from:
 *		http://www.free60.org/wiki/Gamepad
 */

static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
				   u16 cmd, unsigned char *data)
{
	/* valid pad data */
	if (data[0] != 0x00)
		return;

	/* digital pad */
	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		/* dpad as buttons (left, right, up, down) */
		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2));
		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3));
		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0));
		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1));
	}

	/*
	 * This should be a simple else block. However historically
	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
	 * made no sense, but now we can not just switch back and have to
	 * support both behaviors.
	 */
	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
	    xpad->xtype == XTYPE_XBOX360W) {
		input_report_abs(dev, ABS_HAT0X,
				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
		input_report_abs(dev, ABS_HAT0Y,
				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
	}

	/* start/back buttons */
	input_report_key(dev, BTN_START,  data[2] & BIT(4));
	input_report_key(dev, BTN_SELECT, data[2] & BIT(5));

	/* stick press left/right */
	input_report_key(dev, BTN_THUMBL, data[2] & BIT(6));
	input_report_key(dev, BTN_THUMBR, data[2] & BIT(7));

	/* buttons A,B,X,Y,TL,TR and MODE */
	input_report_key(dev, BTN_A,	data[3] & BIT(4));
	input_report_key(dev, BTN_B,	data[3] & BIT(5));
	input_report_key(dev, BTN_X,	data[3] & BIT(6));
	input_report_key(dev, BTN_Y,	data[3] & BIT(7));
	input_report_key(dev, BTN_TL,	data[3] & BIT(0));
	input_report_key(dev, BTN_TR,	data[3] & BIT(1));
	input_report_key(dev, BTN_MODE,	data[3] & BIT(2));

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* left stick */
		input_report_abs(dev, ABS_X,
				 (__s16) le16_to_cpup((__le16 *)(data + 6)));
		input_report_abs(dev, ABS_Y,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));

		/* right stick */
		input_report_abs(dev, ABS_RX,
				 (__s16) le16_to_cpup((__le16 *)(data + 10)));
		input_report_abs(dev, ABS_RY,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
	}

	/* triggers left/right */
	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		input_report_key(dev, BTN_TL2, data[4]);
		input_report_key(dev, BTN_TR2, data[5]);
	} else {
		input_report_abs(dev, ABS_Z, data[4]);
		input_report_abs(dev, ABS_RZ, data[5]);
	}

	input_sync(dev);

	/* XBOX360W controllers can't be turned off without driver assistance */
	if (xpad->xtype == XTYPE_XBOX360W) {
		if (xpad->mode_btn_down_ts > 0 && xpad->pad_present &&
		    ((ktime_get_seconds() - xpad->mode_btn_down_ts) >=
		     XPAD360W_POWEROFF_TIMEOUT)) {
			xpad360w_poweroff_controller(xpad);
			xpad->mode_btn_down_ts = 0;
			return;
		}

		/* mode button down/up */
		if (data[3] & BIT(2))
			xpad->mode_btn_down_ts = ktime_get_seconds();
		else
			xpad->mode_btn_down_ts = 0;
	}
}

static void xpad_presence_work(struct work_struct *work)
{
	struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
	int error;

	if (xpad->pad_present) {
		error = xpad_init_input(xpad);
		if (error) {
			/* complain only, not much else we can do here */
			dev_err(&xpad->dev->dev,
				"unable to init device: %d\n", error);
		} else {
			rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
		}
	} else {
		RCU_INIT_POINTER(xpad->x360w_dev, NULL);
		synchronize_rcu();
		/*
		 * Now that we are sure xpad360w_process_packet is not
		 * using input device we can get rid of it.
		 */
		xpad_deinit_input(xpad);
	}
}

/*
 * xpad360w_process_packet
 *
 * Completes a request by converting the data into events for the
 * input subsystem. It is version for xbox 360 wireless controller.
 *
 * Byte.Bit
 * 00.1 - Status change: The controller or headset has connected/disconnected
 *                       Bits 01.7 and 01.6 are valid
 * 01.7 - Controller present
 * 01.6 - Headset present
 * 01.1 - Pad state (Bytes 4+) valid
 *
 */
static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev;
	bool present;

	/* Presence change */
	if (data[0] & 0x08) {
		present = (data[1] & 0x80) != 0;

		if (xpad->pad_present != present) {
			xpad->pad_present = present;
			schedule_work(&xpad->work);
		}
	}

	/* Valid pad data */
	if (data[1] != 0x1)
		return;

	rcu_read_lock();
	dev = rcu_dereference(xpad->x360w_dev);
	if (dev)
		xpad360_process_packet(xpad, dev, cmd, &data[4]);
	rcu_read_unlock();
}

/*
 *	xpadone_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem. This version is for the Xbox One controller.
 *
 *	The report format was gleaned from
 *	https://github.com/kylelemons/xbox/blob/master/xbox.go
 */
static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev = xpad->dev;
	bool do_sync = false;

	/* the xbox button has its own special report */
	if (data[0] == GIP_CMD_VIRTUAL_KEY) {
		/*
		 * The Xbox One S controller requires these reports to be
		 * acked otherwise it continues sending them forever and
		 * won't report further mode button events.
		 */
		if (data[1] == (GIP_OPT_ACK | GIP_OPT_INTERNAL))
			xpadone_ack_mode_report(xpad, data[2]);

		input_report_key(dev, BTN_MODE, data[4] & GENMASK(1, 0));
		input_sync(dev);

		do_sync = true;
	} else if (data[0] == GIP_CMD_FIRMWARE) {
		/* Some packet formats force us to use this separate to poll paddle inputs */
		if (xpad->packet_type == PKT_XBE2_FW_5_11) {
			/* Mute paddles if controller is in a custom profile slot
			 * Checked by looking at the active profile slot to
			 * verify it's the default slot
			 */
			if (data[19] != 0)
				data[18] = 0;

			/* Elite Series 2 split packet paddle bits */
			input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0));
			input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1));
			input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2));
			input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3));

			do_sync = true;
		}
	} else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */
		/* menu/view buttons */
		input_report_key(dev, BTN_START,  data[4] & BIT(2));
		input_report_key(dev, BTN_SELECT, data[4] & BIT(3));
		if (xpad->mapping & MAP_SELECT_BUTTON)
			input_report_key(dev, KEY_RECORD, data[22] & BIT(0));

		/* buttons A,B,X,Y */
		input_report_key(dev, BTN_A,	data[4] & BIT(4));
		input_report_key(dev, BTN_B,	data[4] & BIT(5));
		input_report_key(dev, BTN_X,	data[4] & BIT(6));
		input_report_key(dev, BTN_Y,	data[4] & BIT(7));

		/* digital pad */
		if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
			/* dpad as buttons (left, right, up, down) */
			input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & BIT(2));
			input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & BIT(3));
			input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & BIT(0));
			input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & BIT(1));
		} else {
			input_report_abs(dev, ABS_HAT0X,
					!!(data[5] & 0x08) - !!(data[5] & 0x04));
			input_report_abs(dev, ABS_HAT0Y,
					!!(data[5] & 0x02) - !!(data[5] & 0x01));
		}

		/* TL/TR */
		input_report_key(dev, BTN_TL,	data[5] & BIT(4));
		input_report_key(dev, BTN_TR,	data[5] & BIT(5));

		/* stick press left/right */
		input_report_key(dev, BTN_THUMBL, data[5] & BIT(6));
		input_report_key(dev, BTN_THUMBR, data[5] & BIT(7));

		if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
			/* left stick */
			input_report_abs(dev, ABS_X,
					(__s16) le16_to_cpup((__le16 *)(data + 10)));
			input_report_abs(dev, ABS_Y,
					~(__s16) le16_to_cpup((__le16 *)(data + 12)));

			/* right stick */
			input_report_abs(dev, ABS_RX,
					(__s16) le16_to_cpup((__le16 *)(data + 14)));
			input_report_abs(dev, ABS_RY,
					~(__s16) le16_to_cpup((__le16 *)(data + 16)));
		}

		/* triggers left/right */
		if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
			input_report_key(dev, BTN_TL2,
					(__u16) le16_to_cpup((__le16 *)(data + 6)));
			input_report_key(dev, BTN_TR2,
					(__u16) le16_to_cpup((__le16 *)(data + 8)));
		} else {
			input_report_abs(dev, ABS_Z,
					(__u16) le16_to_cpup((__le16 *)(data + 6)));
			input_report_abs(dev, ABS_RZ,
					(__u16) le16_to_cpup((__le16 *)(data + 8)));
		}

		/* Profile button has a value of 0-3, so it is reported as an axis */
		if (xpad->mapping & MAP_PROFILE_BUTTON)
			input_report_abs(dev, ABS_PROFILE, data[34]);

		/* paddle handling */
		/* based on SDL's SDL_hidapi_xboxone.c */
		if (xpad->mapping & MAP_PADDLES) {
			if (xpad->packet_type == PKT_XBE1) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (memcmp(&data[4], &data[18], 2) != 0)
					data[32] = 0;

				/* OG Elite Series Controller paddle bits */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[32] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[32] & BIT(3));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[32] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[32] & BIT(2));
			} else if (xpad->packet_type == PKT_XBE2_FW_OLD) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (data[19] != 0)
					data[18] = 0;

				/* Elite Series 2 4.x firmware paddle bits */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3));
			} else if (xpad->packet_type == PKT_XBE2_FW_5_EARLY) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (data[23] != 0)
					data[22] = 0;

				/* Elite Series 2 5.x firmware paddle bits
				 * (before the packet was split)
				 */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[22] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[22] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[22] & BIT(2));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[22] & BIT(3));
			}
		}

		do_sync = true;
	}

	if (do_sync)
		input_sync(dev);
}

static void xpad_irq_in(struct urb *urb)
{
	struct usb_xpad *xpad = urb->context;
	struct device *dev = &xpad->intf->dev;
	int retval, status;

	status = urb->status;

	switch (status) {
	case 0:
		/* success */
		break;
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
			__func__, status);
		return;
	default:
		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
			__func__, status);
		goto exit;
	}

	switch (xpad->xtype) {
	case XTYPE_XBOX360:
		xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
		break;
	case XTYPE_XBOX360W:
		xpad360w_process_packet(xpad, 0, xpad->idata);
		break;
	case XTYPE_XBOXONE:
		xpadone_process_packet(xpad, 0, xpad->idata);
		break;
	default:
		xpad_process_packet(xpad, 0, xpad->idata);
	}

exit:
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
			__func__, retval);
}

/* Callers must hold xpad->odata_lock spinlock */
static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
{
	const struct xboxone_init_packet *init_packet;

	if (xpad->xtype != XTYPE_XBOXONE)
		return false;

	/* Perform initialization sequence for Xbox One pads that require it */
	while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
		init_packet = &xboxone_init_packets[xpad->init_seq++];

		if (init_packet->idVendor != 0 &&
		    init_packet->idVendor != xpad->dev->id.vendor)
			continue;

		if (init_packet->idProduct != 0 &&
		    init_packet->idProduct != xpad->dev->id.product)
			continue;

		/* This packet applies to our device, so prepare to send it */
		memcpy(xpad->odata, init_packet->data, init_packet->len);
		xpad->irq_out->transfer_buffer_length = init_packet->len;

		/* Update packet with current sequence number */
		xpad->odata[2] = xpad->odata_serial++;
		return true;
	}

	return false;
}

/* Callers must hold xpad->odata_lock spinlock */
static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
{
	struct xpad_output_packet *pkt, *packet = NULL;
	int i;

	/* We may have init packets to send before we can send user commands */
	if (xpad_prepare_next_init_packet(xpad))
		return true;

	for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
		if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
			xpad->last_out_packet = 0;

		pkt = &xpad->out_packets[xpad->last_out_packet];
		if (pkt->pending) {
			dev_dbg(&xpad->intf->dev,
				"%s - found pending output packet %d\n",
				__func__, xpad->last_out_packet);
			packet = pkt;
			break;
		}
	}

	if (packet) {
		memcpy(xpad->odata, packet->data, packet->len);
		xpad->irq_out->transfer_buffer_length = packet->len;
		packet->pending = false;
		return true;
	}

	return false;
}

/* Callers must hold xpad->odata_lock spinlock */
static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
{
	int error;

	if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
		usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
		error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
		if (error) {
			dev_err(&xpad->intf->dev,
				"%s - usb_submit_urb failed with result %d\n",
				__func__, error);
			usb_unanchor_urb(xpad->irq_out);
			return -EIO;
		}

		xpad->irq_out_active = true;
	}

	return 0;
}

static void xpad_irq_out(struct urb *urb)
{
	struct usb_xpad *xpad = urb->context;
	struct device *dev = &xpad->intf->dev;
	int status = urb->status;
	int error;
	unsigned long flags;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (status) {
	case 0:
		/* success */
		xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
		break;

	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
			__func__, status);
		xpad->irq_out_active = false;
		break;

	default:
		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
			__func__, status);
		break;
	}

	if (xpad->irq_out_active) {
		usb_anchor_urb(urb, &xpad->irq_out_anchor);
		error = usb_submit_urb(urb, GFP_ATOMIC);
		if (error) {
			dev_err(dev,
				"%s - usb_submit_urb failed with result %d\n",
				__func__, error);
			usb_unanchor_urb(urb);
			xpad->irq_out_active = false;
		}
	}

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
			struct usb_endpoint_descriptor *ep_irq_out)
{
	int error;

	if (xpad->xtype == XTYPE_UNKNOWN)
		return 0;

	init_usb_anchor(&xpad->irq_out_anchor);

	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
					 GFP_KERNEL, &xpad->odata_dma);
	if (!xpad->odata)
		return -ENOMEM;

	spin_lock_init(&xpad->odata_lock);

	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
	if (!xpad->irq_out) {
		error = -ENOMEM;
		goto err_free_coherent;
	}

	usb_fill_int_urb(xpad->irq_out, xpad->udev,
			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
			 xpad->odata, XPAD_PKT_LEN,
			 xpad_irq_out, xpad, ep_irq_out->bInterval);
	xpad->irq_out->transfer_dma = xpad->odata_dma;
	xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	return 0;

err_free_coherent:
	usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
	return error;
}

static void xpad_stop_output(struct usb_xpad *xpad)
{
	if (xpad->xtype != XTYPE_UNKNOWN) {
		if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
						   5000)) {
			dev_warn(&xpad->intf->dev,
				 "timed out waiting for output URB to complete, killing\n");
			usb_kill_anchored_urbs(&xpad->irq_out_anchor);
		}
	}
}

static void xpad_deinit_output(struct usb_xpad *xpad)
{
	if (xpad->xtype != XTYPE_UNKNOWN) {
		usb_free_urb(xpad->irq_out);
		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
				xpad->odata, xpad->odata_dma);
	}
}

static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
{
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];
	unsigned long flags;
	int retval;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->data[0] = 0x08;
	packet->data[1] = 0x00;
	packet->data[2] = 0x0F;
	packet->data[3] = 0xC0;
	packet->data[4] = 0x00;
	packet->data[5] = 0x00;
	packet->data[6] = 0x00;
	packet->data[7] = 0x00;
	packet->data[8] = 0x00;
	packet->data[9] = 0x00;
	packet->data[10] = 0x00;
	packet->data[11] = 0x00;
	packet->len = 12;
	packet->pending = true;

	/* Reset the sequence so we send out presence first */
	xpad->last_out_packet = -1;
	retval = xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);

	return retval;
}

static int xpad_start_xbox_one(struct usb_xpad *xpad)
{
	unsigned long flags;
	int retval;

	if (usb_ifnum_to_if(xpad->udev, GIP_WIRED_INTF_AUDIO)) {
		/*
		 * Explicitly disable the audio interface. This is needed
		 * for some controllers, such as the PowerA Enhanced Wired
		 * Controller for Series X|S (0x20d6:0x200e) to report the
		 * guide button.
		 */
		retval = usb_set_interface(xpad->udev,
					   GIP_WIRED_INTF_AUDIO, 0);
		if (retval)
			dev_warn(&xpad->dev->dev,
				 "unable to disable audio interface: %d\n",
				 retval);
	}

	spin_lock_irqsave(&xpad->odata_lock, flags);

	/*
	 * Begin the init sequence by attempting to send a packet.
	 * We will cycle through the init packet sequence before
	 * sending any packets from the output ring.
	 */
	xpad->init_seq = 0;
	retval = xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);

	return retval;
}

static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
{
	unsigned long flags;
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];
	static const u8 mode_report_ack[] = {
		GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9),
		0x00, GIP_CMD_VIRTUAL_KEY, GIP_OPT_INTERNAL, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00
	};

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->len = sizeof(mode_report_ack);
	memcpy(packet->data, mode_report_ack, packet->len);
	packet->data[2] = seq_num;
	packet->pending = true;

	/* Reset the sequence so we send out the ack now */
	xpad->last_out_packet = -1;
	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);
	struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
	__u16 strong;
	__u16 weak;
	int retval;
	unsigned long flags;

	if (effect->type != FF_RUMBLE)
		return 0;

	strong = effect->u.rumble.strong_magnitude;
	weak = effect->u.rumble.weak_magnitude;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (xpad->xtype) {
	case XTYPE_XBOX:
		packet->data[0] = 0x00;
		packet->data[1] = 0x06;
		packet->data[2] = 0x00;
		packet->data[3] = strong / 256;	/* left actuator */
		packet->data[4] = 0x00;
		packet->data[5] = weak / 256;	/* right actuator */
		packet->len = 6;
		packet->pending = true;
		break;

	case XTYPE_XBOX360:
		packet->data[0] = 0x00;
		packet->data[1] = 0x08;
		packet->data[2] = 0x00;
		packet->data[3] = strong / 256;  /* left actuator? */
		packet->data[4] = weak / 256;	/* right actuator? */
		packet->data[5] = 0x00;
		packet->data[6] = 0x00;
		packet->data[7] = 0x00;
		packet->len = 8;
		packet->pending = true;
		break;

	case XTYPE_XBOX360W:
		packet->data[0] = 0x00;
		packet->data[1] = 0x01;
		packet->data[2] = 0x0F;
		packet->data[3] = 0xC0;
		packet->data[4] = 0x00;
		packet->data[5] = strong / 256;
		packet->data[6] = weak / 256;
		packet->data[7] = 0x00;
		packet->data[8] = 0x00;
		packet->data[9] = 0x00;
		packet->data[10] = 0x00;
		packet->data[11] = 0x00;
		packet->len = 12;
		packet->pending = true;
		break;

	case XTYPE_XBOXONE:
		packet->data[0] = GIP_CMD_RUMBLE; /* activate rumble */
		packet->data[1] = 0x00;
		packet->data[2] = xpad->odata_serial++;
		packet->data[3] = GIP_PL_LEN(9);
		packet->data[4] = 0x00;
		packet->data[5] = GIP_MOTOR_ALL;
		packet->data[6] = 0x00; /* left trigger */
		packet->data[7] = 0x00; /* right trigger */
		packet->data[8] = strong / 512;	/* left actuator */
		packet->data[9] = weak / 512;	/* right actuator */
		packet->data[10] = 0xFF; /* on period */
		packet->data[11] = 0x00; /* off period */
		packet->data[12] = 0xFF; /* repeat count */
		packet->len = 13;
		packet->pending = true;
		break;

	default:
		dev_dbg(&xpad->dev->dev,
			"%s - rumble command sent to unsupported xpad type: %d\n",
			__func__, xpad->xtype);
		retval = -EINVAL;
		goto out;
	}

	retval = xpad_try_sending_next_out_packet(xpad);

out:
	spin_unlock_irqrestore(&xpad->odata_lock, flags);
	return retval;
}

static int xpad_init_ff(struct usb_xpad *xpad)
{
	if (xpad->xtype == XTYPE_UNKNOWN)
		return 0;

	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);

	return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);
}

#else
static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
#endif

#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
#include <linux/leds.h>
#include <linux/idr.h>

static DEFINE_IDA(xpad_pad_seq);

struct xpad_led {
	char name[16];
	struct led_classdev led_cdev;
	struct usb_xpad *xpad;
};

/*
 * set the LEDs on Xbox 360 / Wireless Controllers
 * @param command
 *  0: off
 *  1: all blink, then previous setting
 *  2: 1/top-left blink, then on
 *  3: 2/top-right blink, then on
 *  4: 3/bottom-left blink, then on
 *  5: 4/bottom-right blink, then on
 *  6: 1/top-left on
 *  7: 2/top-right on
 *  8: 3/bottom-left on
 *  9: 4/bottom-right on
 * 10: rotate
 * 11: blink, based on previous setting
 * 12: slow blink, based on previous setting
 * 13: rotate with two lights
 * 14: persistent slow all blink
 * 15: blink once, then previous setting
 */
static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_LED_IDX];
	unsigned long flags;

	command %= 16;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (xpad->xtype) {
	case XTYPE_XBOX360:
		packet->data[0] = 0x01;
		packet->data[1] = 0x03;
		packet->data[2] = command;
		packet->len = 3;
		packet->pending = true;
		break;

	case XTYPE_XBOX360W:
		packet->data[0] = 0x00;
		packet->data[1] = 0x00;
		packet->data[2] = 0x08;
		packet->data[3] = 0x40 + command;
		packet->data[4] = 0x00;
		packet->data[5] = 0x00;
		packet->data[6] = 0x00;
		packet->data[7] = 0x00;
		packet->data[8] = 0x00;
		packet->data[9] = 0x00;
		packet->data[10] = 0x00;
		packet->data[11] = 0x00;
		packet->len = 12;
		packet->pending = true;
		break;
	}

	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

/*
 * Light up the segment corresponding to the pad number on
 * Xbox 360 Controllers.
 */
static void xpad_identify_controller(struct usb_xpad *xpad)
{
	led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
}

static void xpad_led_set(struct led_classdev *led_cdev,
			 enum led_brightness value)
{
	struct xpad_led *xpad_led = container_of(led_cdev,
						 struct xpad_led, led_cdev);

	xpad_send_led_command(xpad_led->xpad, value);
}

static int xpad_led_probe(struct usb_xpad *xpad)
{
	struct xpad_led *led;
	struct led_classdev *led_cdev;
	int error;

	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
		return 0;

	xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
	if (!led)
		return -ENOMEM;

	xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
	if (xpad->pad_nr < 0) {
		error = xpad->pad_nr;
		goto err_free_mem;
	}

	snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
	led->xpad = xpad;

	led_cdev = &led->led_cdev;
	led_cdev->name = led->name;
	led_cdev->brightness_set = xpad_led_set;
	led_cdev->flags = LED_CORE_SUSPENDRESUME;

	error = led_classdev_register(&xpad->udev->dev, led_cdev);
	if (error)
		goto err_free_id;

	xpad_identify_controller(xpad);

	return 0;

err_free_id:
	ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
err_free_mem:
	kfree(led);
	xpad->led = NULL;
	return error;
}

static void xpad_led_disconnect(struct usb_xpad *xpad)
{
	struct xpad_led *xpad_led = xpad->led;

	if (xpad_led) {
		led_classdev_unregister(&xpad_led->led_cdev);
		ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
		kfree(xpad_led);
	}
}
#else
static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
static void xpad_led_disconnect(struct usb_xpad *xpad) { }
#endif

static int xpad_start_input(struct usb_xpad *xpad)
{
	int error;

	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
		return -EIO;

	if (xpad->xtype == XTYPE_XBOXONE) {
		error = xpad_start_xbox_one(xpad);
		if (error) {
			usb_kill_urb(xpad->irq_in);
			return error;
		}
	}
	if (xpad->xtype == XTYPE_XBOX360) {
		/*
		 * Some third-party controllers Xbox 360-style controllers
		 * require this message to finish initialization.
		 */
		u8 dummy[20];

		error = usb_control_msg_recv(xpad->udev, 0,
					     /* bRequest */ 0x01,
					     /* bmRequestType */
					     USB_TYPE_VENDOR | USB_DIR_IN |
						USB_RECIP_INTERFACE,
					     /* wValue */ 0x100,
					     /* wIndex */ 0x00,
					     dummy, sizeof(dummy),
					     25, GFP_KERNEL);
		if (error)
			dev_warn(&xpad->dev->dev,
				 "unable to receive magic message: %d\n",
				 error);
	}

	return 0;
}

static void xpad_stop_input(struct usb_xpad *xpad)
{
	usb_kill_urb(xpad->irq_in);
}

static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
{
	unsigned long flags;
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->data[0] = 0x00;
	packet->data[1] = 0x00;
	packet->data[2] = 0x08;
	packet->data[3] = 0xC0;
	packet->data[4] = 0x00;
	packet->data[5] = 0x00;
	packet->data[6] = 0x00;
	packet->data[7] = 0x00;
	packet->data[8] = 0x00;
	packet->data[9] = 0x00;
	packet->data[10] = 0x00;
	packet->data[11] = 0x00;
	packet->len = 12;
	packet->pending = true;

	/* Reset the sequence so we send out poweroff now */
	xpad->last_out_packet = -1;
	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

static int xpad360w_start_input(struct usb_xpad *xpad)
{
	int error;

	error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
	if (error)
		return -EIO;

	/*
	 * Send presence packet.
	 * This will force the controller to resend connection packets.
	 * This is useful in the case we activate the module after the
	 * adapter has been plugged in, as it won't automatically
	 * send us info about the controllers.
	 */
	error = xpad_inquiry_pad_presence(xpad);
	if (error) {
		usb_kill_urb(xpad->irq_in);
		return error;
	}

	return 0;
}

static void xpad360w_stop_input(struct usb_xpad *xpad)
{
	usb_kill_urb(xpad->irq_in);

	/* Make sure we are done with presence work if it was scheduled */
	flush_work(&xpad->work);
}

static int xpad_open(struct input_dev *dev)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);

	return xpad_start_input(xpad);
}

static void xpad_close(struct input_dev *dev)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);

	xpad_stop_input(xpad);
}

static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
	struct usb_xpad *xpad = input_get_drvdata(input_dev);

	switch (abs) {
	case ABS_X:
	case ABS_Y:
	case ABS_RX:
	case ABS_RY:	/* the two sticks */
		input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
		break;
	case ABS_Z:
	case ABS_RZ:	/* the triggers (if mapped to axes) */
		if (xpad->xtype == XTYPE_XBOXONE)
			input_set_abs_params(input_dev, abs, 0, 1023, 0, 0);
		else
			input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
		break;
	case ABS_HAT0X:
	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
		break;
	case ABS_PROFILE: /* 4 value profile button (such as on XAC) */
		input_set_abs_params(input_dev, abs, 0, 4, 0, 0);
		break;
	default:
		input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
		break;
	}
}

static void xpad_deinit_input(struct usb_xpad *xpad)
{
	if (xpad->input_created) {
		xpad->input_created = false;
		xpad_led_disconnect(xpad);
		input_unregister_device(xpad->dev);
	}
}

static int xpad_init_input(struct usb_xpad *xpad)
{
	struct input_dev *input_dev;
	int i, error;

	input_dev = input_allocate_device();
	if (!input_dev)
		return -ENOMEM;

	xpad->dev = input_dev;
	input_dev->name = xpad->name;
	input_dev->phys = xpad->phys;
	usb_to_input_id(xpad->udev, &input_dev->id);

	if (xpad->xtype == XTYPE_XBOX360W) {
		/* x360w controllers and the receiver have different ids */
		input_dev->id.product = 0x02a1;
	}

	input_dev->dev.parent = &xpad->intf->dev;

	input_set_drvdata(input_dev, xpad);

	if (xpad->xtype != XTYPE_XBOX360W) {
		input_dev->open = xpad_open;
		input_dev->close = xpad_close;
	}

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* set up axes */
		for (i = 0; xpad_abs[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs[i]);
	}

	/* set up standard buttons */
	for (i = 0; xpad_common_btn[i] >= 0; i++)
		input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);

	/* set up model-specific ones */
	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
	    xpad->xtype == XTYPE_XBOXONE) {
		for (i = 0; xpad360_btn[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
		if (xpad->mapping & MAP_SELECT_BUTTON)
			input_set_capability(input_dev, EV_KEY, KEY_RECORD);
	} else {
		for (i = 0; xpad_btn[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
	}

	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		for (i = 0; xpad_btn_pad[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY,
					     xpad_btn_pad[i]);
	}

	/* set up paddles if the controller has them */
	if (xpad->mapping & MAP_PADDLES) {
		for (i = 0; xpad_btn_paddles[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad_btn_paddles[i]);
	}

	/*
	 * This should be a simple else block. However historically
	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
	 * made no sense, but now we can not just switch back and have to
	 * support both behaviors.
	 */
	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
	    xpad->xtype == XTYPE_XBOX360W) {
		for (i = 0; xpad_abs_pad[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
	}

	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY,
					     xpad_btn_triggers[i]);
	} else {
		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
	}

	/* setup profile button as an axis with 4 possible values */
	if (xpad->mapping & MAP_PROFILE_BUTTON)
		xpad_set_up_abs(input_dev, ABS_PROFILE);

	error = xpad_init_ff(xpad);
	if (error)
		goto err_free_input;

	error = xpad_led_probe(xpad);
	if (error)
		goto err_destroy_ff;

	error = input_register_device(xpad->dev);
	if (error)
		goto err_disconnect_led;

	xpad->input_created = true;
	return 0;

err_disconnect_led:
	xpad_led_disconnect(xpad);
err_destroy_ff:
	input_ff_destroy(input_dev);
err_free_input:
	input_free_device(input_dev);
	return error;
}

static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
	struct usb_device *udev = interface_to_usbdev(intf);
	struct usb_xpad *xpad;
	struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
	int i, error;

	if (intf->cur_altsetting->desc.bNumEndpoints != 2)
		return -ENODEV;

	for (i = 0; xpad_device[i].idVendor; i++) {
		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
			break;
	}

	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
	if (!xpad)
		return -ENOMEM;

	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));

	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
					 GFP_KERNEL, &xpad->idata_dma);
	if (!xpad->idata) {
		error = -ENOMEM;
		goto err_free_mem;
	}

	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
	if (!xpad->irq_in) {
		error = -ENOMEM;
		goto err_free_idata;
	}

	xpad->udev = udev;
	xpad->intf = intf;
	xpad->mapping = xpad_device[i].mapping;
	xpad->xtype = xpad_device[i].xtype;
	xpad->name = xpad_device[i].name;
	xpad->packet_type = PKT_XB;
	INIT_WORK(&xpad->work, xpad_presence_work);

	if (xpad->xtype == XTYPE_UNKNOWN) {
		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
			if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
				xpad->xtype = XTYPE_XBOX360W;
			else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208)
				xpad->xtype = XTYPE_XBOXONE;
			else
				xpad->xtype = XTYPE_XBOX360;
		} else {
			xpad->xtype = XTYPE_XBOX;
		}

		if (dpad_to_buttons)
			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
		if (triggers_to_buttons)
			xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
		if (sticks_to_null)
			xpad->mapping |= MAP_STICKS_TO_NULL;
	}

	if (xpad->xtype == XTYPE_XBOXONE &&
	    intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) {
		/*
		 * The Xbox One controller lists three interfaces all with the
		 * same interface class, subclass and protocol. Differentiate by
		 * interface number.
		 */
		error = -ENODEV;
		goto err_free_in_urb;
	}

	ep_irq_in = ep_irq_out = NULL;

	for (i = 0; i < 2; i++) {
		struct usb_endpoint_descriptor *ep =
				&intf->cur_altsetting->endpoint[i].desc;

		if (usb_endpoint_xfer_int(ep)) {
			if (usb_endpoint_dir_in(ep))
				ep_irq_in = ep;
			else
				ep_irq_out = ep;
		}
	}

	if (!ep_irq_in || !ep_irq_out) {
		error = -ENODEV;
		goto err_free_in_urb;
	}

	error = xpad_init_output(intf, xpad, ep_irq_out);
	if (error)
		goto err_free_in_urb;

	usb_fill_int_urb(xpad->irq_in, udev,
			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
			 xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
			 xpad, ep_irq_in->bInterval);
	xpad->irq_in->transfer_dma = xpad->idata_dma;
	xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	usb_set_intfdata(intf, xpad);

	/* Packet type detection */
	if (le16_to_cpu(udev->descriptor.idVendor) == 0x045e) { /* Microsoft controllers */
		if (le16_to_cpu(udev->descriptor.idProduct) == 0x02e3) {
			/* The original elite controller always uses the oldest
			 * type of extended packet
			 */
			xpad->packet_type = PKT_XBE1;
		} else if (le16_to_cpu(udev->descriptor.idProduct) == 0x0b00) {
			/* The elite 2 controller has seen multiple packet
			 * revisions. These are tied to specific firmware
			 * versions
			 */
			if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x0500) {
				/* This is the format that the Elite 2 used
				 * prior to the BLE update
				 */
				xpad->packet_type = PKT_XBE2_FW_OLD;
			} else if (le16_to_cpu(udev->descriptor.bcdDevice) <
				   0x050b) {
				/* This is the format that the Elite 2 used
				 * prior to the update that split the packet
				 */
				xpad->packet_type = PKT_XBE2_FW_5_EARLY;
			} else {
				/* The split packet format that was introduced
				 * in firmware v5.11
				 */
				xpad->packet_type = PKT_XBE2_FW_5_11;
			}
		}
	}

	if (xpad->xtype == XTYPE_XBOX360W) {
		/*
		 * Submit the int URB immediately rather than waiting for open
		 * because we get status messages from the device whether
		 * or not any controllers are attached.  In fact, it's
		 * exactly the message that a controller has arrived that
		 * we're waiting for.
		 */
		error = xpad360w_start_input(xpad);
		if (error)
			goto err_deinit_output;
		/*
		 * Wireless controllers require RESET_RESUME to work properly
		 * after suspend. Ideally this quirk should be in usb core
		 * quirk list, but we have too many vendors producing these
		 * controllers and we'd need to maintain 2 identical lists
		 * here in this driver and in usb core.
		 */
		udev->quirks |= USB_QUIRK_RESET_RESUME;
	} else {
		error = xpad_init_input(xpad);
		if (error)
			goto err_deinit_output;
	}
	return 0;

err_deinit_output:
	xpad_deinit_output(xpad);
err_free_in_urb:
	usb_free_urb(xpad->irq_in);
err_free_idata:
	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
err_free_mem:
	kfree(xpad);
	return error;
}

static void xpad_disconnect(struct usb_interface *intf)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);

	if (xpad->xtype == XTYPE_XBOX360W)
		xpad360w_stop_input(xpad);

	xpad_deinit_input(xpad);

	/*
	 * Now that both input device and LED device are gone we can
	 * stop output URB.
	 */
	xpad_stop_output(xpad);

	xpad_deinit_output(xpad);

	usb_free_urb(xpad->irq_in);
	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
			xpad->idata, xpad->idata_dma);

	kfree(xpad);

	usb_set_intfdata(intf, NULL);
}

static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);
	struct input_dev *input = xpad->dev;

	if (xpad->xtype == XTYPE_XBOX360W) {
		/*
		 * Wireless controllers always listen to input so
		 * they are notified when controller shows up
		 * or goes away.
		 */
		xpad360w_stop_input(xpad);

		/*
		 * The wireless adapter is going off now, so the
		 * gamepads are going to become disconnected.
		 * Unless explicitly disabled, power them down
		 * so they don't just sit there flashing.
		 */
		if (auto_poweroff && xpad->pad_present)
			xpad360w_poweroff_controller(xpad);
	} else {
		mutex_lock(&input->mutex);
		if (input_device_enabled(input))
			xpad_stop_input(xpad);
		mutex_unlock(&input->mutex);
	}

	xpad_stop_output(xpad);

	return 0;
}

static int xpad_resume(struct usb_interface *intf)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);
	struct input_dev *input = xpad->dev;
	int retval = 0;

	if (xpad->xtype == XTYPE_XBOX360W) {
		retval = xpad360w_start_input(xpad);
	} else {
		mutex_lock(&input->mutex);
		if (input_device_enabled(input)) {
			retval = xpad_start_input(xpad);
		} else if (xpad->xtype == XTYPE_XBOXONE) {
			/*
			 * Even if there are no users, we'll send Xbox One pads
			 * the startup sequence so they don't sit there and
			 * blink until somebody opens the input device again.
			 */
			retval = xpad_start_xbox_one(xpad);
		}
		mutex_unlock(&input->mutex);
	}

	return retval;
}

static struct usb_driver xpad_driver = {
	.name		= "xpad",
	.probe		= xpad_probe,
	.disconnect	= xpad_disconnect,
	.suspend	= xpad_suspend,
	.resume		= xpad_resume,
	.id_table	= xpad_table,
};

module_usb_driver(xpad_driver);

MODULE_AUTHOR("Marko Friedemann <mfr@bmx-chemnitz.de>");
MODULE_DESCRIPTION("Xbox pad driver");
MODULE_LICENSE("GPL");