1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
|
// SPDX-License-Identifier: GPL-2.0+
/*
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
* Copyright (c) 2008-2009 Marvell Semiconductor
*/
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <net/dsa.h>
#include "mv88e6060.h"
static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
{
return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}
static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
{
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
{
int ret;
ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
if (ret >= 0) {
if (ret == PORT_SWITCH_ID_6060)
return "Marvell 88E6060 (A0)";
if (ret == PORT_SWITCH_ID_6060_R1 ||
ret == PORT_SWITCH_ID_6060_R2)
return "Marvell 88E6060 (B0)";
if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
return "Marvell 88E6060";
}
return NULL;
}
static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
int port,
enum dsa_tag_protocol m)
{
return DSA_TAG_PROTO_TRAILER;
}
static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
{
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
if (ret < 0)
return ret;
ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
ret & ~PORT_CONTROL_STATE_MASK);
if (ret)
return ret;
}
/* Wait for transmit queues to drain. */
usleep_range(2000, 4000);
/* Reset the switch. */
ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_SWRESET |
GLOBAL_ATU_CONTROL_LEARNDIS);
if (ret)
return ret;
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
if (ret < 0)
return ret;
if (ret & GLOBAL_STATUS_INIT_READY)
break;
usleep_range(1000, 2000);
}
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
}
static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
{
int ret;
/* Disable discarding of frames with excessive collisions,
* set the maximum frame size to 1536 bytes, and mask all
* interrupt sources.
*/
ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_MAX_FRAME_1536);
if (ret)
return ret;
/* Disable automatic address learning.
*/
return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_LEARNDIS);
}
static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
{
int addr = REG_PORT(p);
int ret;
if (dsa_is_unused_port(priv->ds, p))
return 0;
/* Do not force flow control, disable Ingress and Egress
* Header tagging, disable VLAN tunneling, and set the port
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
ret = reg_write(priv, addr, PORT_CONTROL,
dsa_is_cpu_port(priv->ds, p) ?
PORT_CONTROL_TRAILER |
PORT_CONTROL_INGRESS_MODE |
PORT_CONTROL_STATE_FORWARDING :
PORT_CONTROL_STATE_FORWARDING);
if (ret)
return ret;
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the CPU port.
*/
ret = reg_write(priv, addr, PORT_VLAN_MAP,
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(priv->ds, p) ?
dsa_user_ports(priv->ds) :
BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
if (ret)
return ret;
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
}
static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
{
u8 addr[ETH_ALEN];
int ret;
u16 val;
eth_random_addr(addr);
val = addr[0] << 8 | addr[1];
/* The multicast bit is always transmitted as a zero, so the switch uses
* bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
*/
val &= 0xfeff;
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
if (ret)
return ret;
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
(addr[2] << 8) | addr[3]);
if (ret)
return ret;
return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
(addr[4] << 8) | addr[5]);
}
static int mv88e6060_setup(struct dsa_switch *ds)
{
struct mv88e6060_priv *priv = ds->priv;
int ret;
int i;
priv->ds = ds;
ret = mv88e6060_switch_reset(priv);
if (ret < 0)
return ret;
/* @@@ initialise atu */
ret = mv88e6060_setup_global(priv);
if (ret < 0)
return ret;
ret = mv88e6060_setup_addr(priv);
if (ret < 0)
return ret;
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = mv88e6060_setup_port(priv, i);
if (ret < 0)
return ret;
}
return 0;
}
static int mv88e6060_port_to_phy_addr(int port)
{
if (port >= 0 && port < MV88E6060_PORTS)
return port;
return -1;
}
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_read(priv, addr, regnum);
}
static int
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_write(priv, addr, regnum, val);
}
static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
unsigned long *interfaces = config->supported_interfaces;
struct mv88e6060_priv *priv = ds->priv;
int addr = REG_PORT(port);
int ret;
ret = reg_read(priv, addr, PORT_STATUS);
if (ret < 0) {
dev_err(ds->dev,
"port %d: unable to read status register: %pe\n",
port, ERR_PTR(ret));
return;
}
/* If the port is configured in SNI mode (acts as a 10Mbps PHY),
* it should have phy-mode = "sni", but that doesn't yet exist, so
* forcibly fail validation until the need arises to introduce it.
*/
if (!(ret & PORT_STATUS_PORTMODE)) {
dev_warn(ds->dev, "port %d: SNI mode not supported\n", port);
return;
}
config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
if (port >= 4) {
/* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
__set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
}
if (port <= 4) {
/* Ports 0 to 3 have internal PHYs, and port 4 can optionally
* use an internal PHY.
*/
/* Internal PHY */
__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
/* Default phylib interface mode */
__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
}
}
static const struct dsa_switch_ops mv88e6060_switch_ops = {
.get_tag_protocol = mv88e6060_get_tag_protocol,
.setup = mv88e6060_setup,
.phy_read = mv88e6060_phy_read,
.phy_write = mv88e6060_phy_write,
.phylink_get_caps = mv88e6060_phylink_get_caps,
};
static int mv88e6060_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct mv88e6060_priv *priv;
struct dsa_switch *ds;
const char *name;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->bus = mdiodev->bus;
priv->sw_addr = mdiodev->addr;
name = mv88e6060_get_name(priv->bus, priv->sw_addr);
if (!name)
return -ENODEV;
dev_info(dev, "switch %s detected\n", name);
ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
if (!ds)
return -ENOMEM;
ds->dev = dev;
ds->num_ports = MV88E6060_PORTS;
ds->priv = priv;
ds->dev = dev;
ds->ops = &mv88e6060_switch_ops;
dev_set_drvdata(dev, ds);
return dsa_register_switch(ds);
}
static void mv88e6060_remove(struct mdio_device *mdiodev)
{
struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
if (!ds)
return;
dsa_unregister_switch(ds);
}
static void mv88e6060_shutdown(struct mdio_device *mdiodev)
{
struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
if (!ds)
return;
dsa_switch_shutdown(ds);
dev_set_drvdata(&mdiodev->dev, NULL);
}
static const struct of_device_id mv88e6060_of_match[] = {
{
.compatible = "marvell,mv88e6060",
},
{ /* sentinel */ },
};
static struct mdio_driver mv88e6060_driver = {
.probe = mv88e6060_probe,
.remove = mv88e6060_remove,
.shutdown = mv88e6060_shutdown,
.mdiodrv.driver = {
.name = "mv88e6060",
.of_match_table = mv88e6060_of_match,
},
};
mdio_module_driver(mv88e6060_driver);
MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mv88e6060");
|