1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
|
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018 Intel Corporation */
#include <linux/delay.h>
#include "igc_hw.h"
#include "igc_i225.h"
#include "igc_mac.h"
#include "igc_base.h"
#include "igc.h"
/**
* igc_reset_hw_base - Reset hardware
* @hw: pointer to the HW structure
*
* This resets the hardware into a known state. This is a
* function pointer entry point called by the api module.
*/
static s32 igc_reset_hw_base(struct igc_hw *hw)
{
s32 ret_val;
u32 ctrl;
/* Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
ret_val = igc_disable_pcie_master(hw);
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed\n");
hw_dbg("Masking off all interrupts\n");
wr32(IGC_IMC, 0xffffffff);
wr32(IGC_RCTL, 0);
wr32(IGC_TCTL, IGC_TCTL_PSP);
wrfl();
usleep_range(10000, 20000);
ctrl = rd32(IGC_CTRL);
hw_dbg("Issuing a global reset to MAC\n");
wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
ret_val = igc_get_auto_rd_done(hw);
if (ret_val) {
/* When auto config read does not complete, do not
* return with an error. This can happen in situations
* where there is no eeprom and prevents getting link.
*/
hw_dbg("Auto Read Done did not complete\n");
}
/* Clear any pending interrupt events. */
wr32(IGC_IMC, 0xffffffff);
rd32(IGC_ICR);
return ret_val;
}
/**
* igc_init_nvm_params_base - Init NVM func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_nvm_params_base(struct igc_hw *hw)
{
struct igc_nvm_info *nvm = &hw->nvm;
u32 eecd = rd32(IGC_EECD);
u16 size;
size = FIELD_GET(IGC_EECD_SIZE_EX_MASK, eecd);
/* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
/* Just in case size is out of range, cap it to the largest
* EEPROM size supported
*/
if (size > 15)
size = 15;
nvm->type = igc_nvm_eeprom_spi;
nvm->word_size = BIT(size);
nvm->opcode_bits = 8;
nvm->delay_usec = 1;
nvm->page_size = eecd & IGC_EECD_ADDR_BITS ? 32 : 8;
nvm->address_bits = eecd & IGC_EECD_ADDR_BITS ?
16 : 8;
if (nvm->word_size == BIT(15))
nvm->page_size = 128;
return 0;
}
/**
* igc_setup_copper_link_base - Configure copper link settings
* @hw: pointer to the HW structure
*
* Configures the link for auto-neg or forced speed and duplex. Then we check
* for link, once link is established calls to configure collision distance
* and flow control are called.
*/
static s32 igc_setup_copper_link_base(struct igc_hw *hw)
{
s32 ret_val = 0;
u32 ctrl;
ctrl = rd32(IGC_CTRL);
ctrl |= IGC_CTRL_SLU;
ctrl &= ~(IGC_CTRL_FRCSPD | IGC_CTRL_FRCDPX);
wr32(IGC_CTRL, ctrl);
ret_val = igc_setup_copper_link(hw);
return ret_val;
}
/**
* igc_init_mac_params_base - Init MAC func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_mac_params_base(struct igc_hw *hw)
{
struct igc_dev_spec_base *dev_spec = &hw->dev_spec._base;
struct igc_mac_info *mac = &hw->mac;
/* Set mta register count */
mac->mta_reg_count = 128;
mac->rar_entry_count = IGC_RAR_ENTRIES;
/* reset */
mac->ops.reset_hw = igc_reset_hw_base;
mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225;
mac->ops.release_swfw_sync = igc_release_swfw_sync_i225;
/* Allow a single clear of the SW semaphore on I225 */
if (mac->type == igc_i225)
dev_spec->clear_semaphore_once = true;
/* physical interface link setup */
mac->ops.setup_physical_interface = igc_setup_copper_link_base;
return 0;
}
/**
* igc_init_phy_params_base - Init PHY func ptrs.
* @hw: pointer to the HW structure
*/
static s32 igc_init_phy_params_base(struct igc_hw *hw)
{
struct igc_phy_info *phy = &hw->phy;
s32 ret_val = 0;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT_2500;
phy->reset_delay_us = 100;
/* set lan id */
hw->bus.func = FIELD_GET(IGC_STATUS_FUNC_MASK, rd32(IGC_STATUS));
/* Make sure the PHY is in a good state. Several people have reported
* firmware leaving the PHY's page select register set to something
* other than the default of zero, which causes the PHY ID read to
* access something other than the intended register.
*/
ret_val = hw->phy.ops.reset(hw);
if (ret_val) {
hw_dbg("Error resetting the PHY\n");
goto out;
}
ret_val = igc_get_phy_id(hw);
if (ret_val)
return ret_val;
igc_check_for_copper_link(hw);
out:
return ret_val;
}
static s32 igc_get_invariants_base(struct igc_hw *hw)
{
struct igc_mac_info *mac = &hw->mac;
s32 ret_val = 0;
switch (hw->device_id) {
case IGC_DEV_ID_I225_LM:
case IGC_DEV_ID_I225_V:
case IGC_DEV_ID_I225_I:
case IGC_DEV_ID_I220_V:
case IGC_DEV_ID_I225_K:
case IGC_DEV_ID_I225_K2:
case IGC_DEV_ID_I226_K:
case IGC_DEV_ID_I225_LMVP:
case IGC_DEV_ID_I226_LMVP:
case IGC_DEV_ID_I225_IT:
case IGC_DEV_ID_I226_LM:
case IGC_DEV_ID_I226_V:
case IGC_DEV_ID_I226_IT:
case IGC_DEV_ID_I221_V:
case IGC_DEV_ID_I226_BLANK_NVM:
case IGC_DEV_ID_I225_BLANK_NVM:
mac->type = igc_i225;
break;
default:
return -IGC_ERR_MAC_INIT;
}
hw->phy.media_type = igc_media_type_copper;
/* mac initialization and operations */
ret_val = igc_init_mac_params_base(hw);
if (ret_val)
goto out;
/* NVM initialization */
ret_val = igc_init_nvm_params_base(hw);
switch (hw->mac.type) {
case igc_i225:
ret_val = igc_init_nvm_params_i225(hw);
break;
default:
break;
}
/* setup PHY parameters */
ret_val = igc_init_phy_params_base(hw);
if (ret_val)
goto out;
out:
return ret_val;
}
/**
* igc_acquire_phy_base - Acquire rights to access PHY
* @hw: pointer to the HW structure
*
* Acquire access rights to the correct PHY. This is a
* function pointer entry point called by the api module.
*/
static s32 igc_acquire_phy_base(struct igc_hw *hw)
{
u16 mask = IGC_SWFW_PHY0_SM;
return hw->mac.ops.acquire_swfw_sync(hw, mask);
}
/**
* igc_release_phy_base - Release rights to access PHY
* @hw: pointer to the HW structure
*
* A wrapper to release access rights to the correct PHY. This is a
* function pointer entry point called by the api module.
*/
static void igc_release_phy_base(struct igc_hw *hw)
{
u16 mask = IGC_SWFW_PHY0_SM;
hw->mac.ops.release_swfw_sync(hw, mask);
}
/**
* igc_init_hw_base - Initialize hardware
* @hw: pointer to the HW structure
*
* This inits the hardware readying it for operation.
*/
static s32 igc_init_hw_base(struct igc_hw *hw)
{
struct igc_mac_info *mac = &hw->mac;
u16 i, rar_count = mac->rar_entry_count;
s32 ret_val = 0;
/* Setup the receive address */
igc_init_rx_addrs(hw, rar_count);
/* Zero out the Multicast HASH table */
hw_dbg("Zeroing the MTA\n");
for (i = 0; i < mac->mta_reg_count; i++)
array_wr32(IGC_MTA, i, 0);
/* Zero out the Unicast HASH table */
hw_dbg("Zeroing the UTA\n");
for (i = 0; i < mac->uta_reg_count; i++)
array_wr32(IGC_UTA, i, 0);
/* Setup link and flow control */
ret_val = igc_setup_link(hw);
/* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
* is no link.
*/
igc_clear_hw_cntrs_base(hw);
return ret_val;
}
/**
* igc_power_down_phy_copper_base - Remove link during PHY power down
* @hw: pointer to the HW structure
*
* In the case of a PHY power down to save power, or to turn off link during a
* driver unload, or wake on lan is not enabled, remove the link.
*/
void igc_power_down_phy_copper_base(struct igc_hw *hw)
{
/* If the management interface is not enabled, then power down */
if (!(igc_enable_mng_pass_thru(hw) || igc_check_reset_block(hw)))
igc_power_down_phy_copper(hw);
}
/**
* igc_rx_fifo_flush_base - Clean rx fifo after Rx enable
* @hw: pointer to the HW structure
*
* After Rx enable, if manageability is enabled then there is likely some
* bad data at the start of the fifo and possibly in the DMA fifo. This
* function clears the fifos and flushes any packets that came in as rx was
* being enabled.
*/
void igc_rx_fifo_flush_base(struct igc_hw *hw)
{
u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
int i, ms_wait;
/* disable IPv6 options as per hardware errata */
rfctl = rd32(IGC_RFCTL);
rfctl |= IGC_RFCTL_IPV6_EX_DIS;
wr32(IGC_RFCTL, rfctl);
if (!(rd32(IGC_MANC) & IGC_MANC_RCV_TCO_EN))
return;
/* Disable all Rx queues */
for (i = 0; i < 4; i++) {
rxdctl[i] = rd32(IGC_RXDCTL(i));
wr32(IGC_RXDCTL(i),
rxdctl[i] & ~IGC_RXDCTL_QUEUE_ENABLE);
}
/* Poll all queues to verify they have shut down */
for (ms_wait = 0; ms_wait < 10; ms_wait++) {
usleep_range(1000, 2000);
rx_enabled = 0;
for (i = 0; i < 4; i++)
rx_enabled |= rd32(IGC_RXDCTL(i));
if (!(rx_enabled & IGC_RXDCTL_QUEUE_ENABLE))
break;
}
if (ms_wait == 10)
hw_dbg("Queue disable timed out after 10ms\n");
/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
* incoming packets are rejected. Set enable and wait 2ms so that
* any packet that was coming in as RCTL.EN was set is flushed
*/
wr32(IGC_RFCTL, rfctl & ~IGC_RFCTL_LEF);
rlpml = rd32(IGC_RLPML);
wr32(IGC_RLPML, 0);
rctl = rd32(IGC_RCTL);
temp_rctl = rctl & ~(IGC_RCTL_EN | IGC_RCTL_SBP);
temp_rctl |= IGC_RCTL_LPE;
wr32(IGC_RCTL, temp_rctl);
wr32(IGC_RCTL, temp_rctl | IGC_RCTL_EN);
wrfl();
usleep_range(2000, 3000);
/* Enable Rx queues that were previously enabled and restore our
* previous state
*/
for (i = 0; i < 4; i++)
wr32(IGC_RXDCTL(i), rxdctl[i]);
wr32(IGC_RCTL, rctl);
wrfl();
wr32(IGC_RLPML, rlpml);
wr32(IGC_RFCTL, rfctl);
/* Flush receive errors generated by workaround */
rd32(IGC_ROC);
rd32(IGC_RNBC);
rd32(IGC_MPC);
}
bool igc_is_device_id_i225(struct igc_hw *hw)
{
switch (hw->device_id) {
case IGC_DEV_ID_I225_LM:
case IGC_DEV_ID_I225_V:
case IGC_DEV_ID_I225_I:
case IGC_DEV_ID_I225_K:
case IGC_DEV_ID_I225_K2:
case IGC_DEV_ID_I225_LMVP:
case IGC_DEV_ID_I225_IT:
return true;
default:
return false;
}
}
bool igc_is_device_id_i226(struct igc_hw *hw)
{
switch (hw->device_id) {
case IGC_DEV_ID_I226_LM:
case IGC_DEV_ID_I226_V:
case IGC_DEV_ID_I226_K:
case IGC_DEV_ID_I226_IT:
return true;
default:
return false;
}
}
static struct igc_mac_operations igc_mac_ops_base = {
.init_hw = igc_init_hw_base,
.check_for_link = igc_check_for_copper_link,
.rar_set = igc_rar_set,
.read_mac_addr = igc_read_mac_addr,
.get_speed_and_duplex = igc_get_speed_and_duplex_copper,
};
static const struct igc_phy_operations igc_phy_ops_base = {
.acquire = igc_acquire_phy_base,
.release = igc_release_phy_base,
.reset = igc_phy_hw_reset,
.read_reg = igc_read_phy_reg_gpy,
.write_reg = igc_write_phy_reg_gpy,
};
const struct igc_info igc_base_info = {
.get_invariants = igc_get_invariants_base,
.mac_ops = &igc_mac_ops_base,
.phy_ops = &igc_phy_ops_base,
};
|