summaryrefslogtreecommitdiffstats
path: root/drivers/net/mdio/mdio-mux-meson-gxl.c
blob: 89554021b5ccc40a0dd494221e90d3ce8f755d2a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2022 Baylibre, SAS.
 * Author: Jerome Brunet <jbrunet@baylibre.com>
 */

#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mdio-mux.h>
#include <linux/module.h>
#include <linux/platform_device.h>

#define ETH_REG2		0x0
#define  REG2_PHYID		GENMASK(21, 0)
#define   EPHY_GXL_ID		0x110181
#define  REG2_LEDACT		GENMASK(23, 22)
#define  REG2_LEDLINK		GENMASK(25, 24)
#define  REG2_DIV4SEL		BIT(27)
#define  REG2_ADCBYPASS		BIT(30)
#define  REG2_CLKINSEL		BIT(31)
#define ETH_REG3		0x4
#define  REG3_ENH		BIT(3)
#define  REG3_CFGMODE		GENMASK(6, 4)
#define  REG3_AUTOMDIX		BIT(7)
#define  REG3_PHYADDR		GENMASK(12, 8)
#define  REG3_PWRUPRST		BIT(21)
#define  REG3_PWRDOWN		BIT(22)
#define  REG3_LEDPOL		BIT(23)
#define  REG3_PHYMDI		BIT(26)
#define  REG3_CLKINEN		BIT(29)
#define  REG3_PHYIP		BIT(30)
#define  REG3_PHYEN		BIT(31)
#define ETH_REG4		0x8
#define  REG4_PWRUPRSTSIG	BIT(0)

#define MESON_GXL_MDIO_EXTERNAL_ID 0
#define MESON_GXL_MDIO_INTERNAL_ID 1

struct gxl_mdio_mux {
	void __iomem *regs;
	void *mux_handle;
};

static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
{
	u32 val;

	/* Setup the internal phy */
	val = (REG3_ENH |
	       FIELD_PREP(REG3_CFGMODE, 0x7) |
	       REG3_AUTOMDIX |
	       FIELD_PREP(REG3_PHYADDR, 8) |
	       REG3_LEDPOL |
	       REG3_PHYMDI |
	       REG3_CLKINEN |
	       REG3_PHYIP);

	writel(REG4_PWRUPRSTSIG, priv->regs + ETH_REG4);
	writel(val, priv->regs + ETH_REG3);
	mdelay(10);

	/* NOTE: The HW kept the phy id configurable at runtime.
	 * The id below is arbitrary. It is the one used in the vendor code.
	 * The only constraint is that it must match the one in
	 * drivers/net/phy/meson-gxl.c to properly match the PHY.
	 */
	writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
	       priv->regs + ETH_REG2);

	/* Enable the internal phy */
	val |= REG3_PHYEN;
	writel(val, priv->regs + ETH_REG3);
	writel(0, priv->regs + ETH_REG4);

	/* The phy needs a bit of time to power up */
	mdelay(10);
}

static void gxl_enable_external_mdio(struct gxl_mdio_mux *priv)
{
	/* Reset the mdio bus mux to the external phy */
	writel(0, priv->regs + ETH_REG3);
}

static int gxl_mdio_switch_fn(int current_child, int desired_child,
			      void *data)
{
	struct gxl_mdio_mux *priv = dev_get_drvdata(data);

	if (current_child == desired_child)
		return 0;

	switch (desired_child) {
	case MESON_GXL_MDIO_EXTERNAL_ID:
		gxl_enable_external_mdio(priv);
		break;
	case MESON_GXL_MDIO_INTERNAL_ID:
		gxl_enable_internal_mdio(priv);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static const struct of_device_id gxl_mdio_mux_match[] = {
	{ .compatible = "amlogic,gxl-mdio-mux", },
	{},
};
MODULE_DEVICE_TABLE(of, gxl_mdio_mux_match);

static int gxl_mdio_mux_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct gxl_mdio_mux *priv;
	struct clk *rclk;
	int ret;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;
	platform_set_drvdata(pdev, priv);

	priv->regs = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(priv->regs))
		return PTR_ERR(priv->regs);

	rclk = devm_clk_get_enabled(dev, "ref");
	if (IS_ERR(rclk))
		return dev_err_probe(dev, PTR_ERR(rclk),
				     "failed to get reference clock\n");

	ret = mdio_mux_init(dev, dev->of_node, gxl_mdio_switch_fn,
			    &priv->mux_handle, dev, NULL);
	if (ret)
		dev_err_probe(dev, ret, "mdio multiplexer init failed\n");

	return ret;
}

static void gxl_mdio_mux_remove(struct platform_device *pdev)
{
	struct gxl_mdio_mux *priv = platform_get_drvdata(pdev);

	mdio_mux_uninit(priv->mux_handle);
}

static struct platform_driver gxl_mdio_mux_driver = {
	.probe		= gxl_mdio_mux_probe,
	.remove_new	= gxl_mdio_mux_remove,
	.driver		= {
		.name	= "gxl-mdio-mux",
		.of_match_table = gxl_mdio_mux_match,
	},
};
module_platform_driver(gxl_mdio_mux_driver);

MODULE_DESCRIPTION("Amlogic GXL MDIO multiplexer driver");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL");