diff options
Diffstat (limited to 'upstream/debian-bookworm/man5/sane-sharp.5')
| -rw-r--r-- | upstream/debian-bookworm/man5/sane-sharp.5 | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/upstream/debian-bookworm/man5/sane-sharp.5 b/upstream/debian-bookworm/man5/sane-sharp.5 new file mode 100644 index 00000000..1235ea99 --- /dev/null +++ b/upstream/debian-bookworm/man5/sane-sharp.5 @@ -0,0 +1,443 @@ +.TH sane\-sharp 5 "11 Jul 2008" "" "SANE Scanner Access Now Easy" +.IX sane\-sharp +.SH NAME +sane\-sharp \- SANE backend for SHARP scanners +.SH DESCRIPTION +The +.B sane\-sharp +library implements a SANE (Scanner Access Now Easy) backend that +provides access to Sharp SCSI scanners. This backend should be +considered +.B beta-quality +software! In the current state it is known to work with JX-610 and JX-250 +scanners. It is prepared for usage with the JX-330 series scanners, +but we are not able to test it with these devices. +.PP +For other Sharp scanners, it may or may not work. +.PP +At present, +the following scanners are known to work with this backend. +.RS +.PP +.ft CR +.nf +Vendor Product id: +----- ----------- +Sharp JX-610 +Sharp JX-250 +Sharp JX-320 +Sharp JX-330 +Sharp JX-350 +.fi +.ft R +.RE +.PP +The following scanners are detected by the backend, but not tested: +.PP +.RS +.ft CR +.nf +Vendor Product id: +----- ----------- +Sharp JX-325 +.fi +.ft R +.RE +.SH DEVICE NAMES +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +where +.I special +is the path-name for the special device that corresponds to a +SCSI scanner. The special device name must be a generic SCSI device or a +symlink to such a device. Under Linux, such a device name could be +.I /dev/sga +or +.IR /dev/sge , +for example. See +.BR sane\-scsi (5) +for details. + +.SH SCAN OPTIONS +.TP +.B \-\-mode +Scan Mode. Possible settings are: +.I Lineart +(1 bit black & white scans), +.I Gray +(8 bit gray scale scans), +.I Lineart Color +(bi-level color scans), and +.I Color +(8 bit RGB scans). The default value is +.I Color. + +.TP +.B \-\-halftone\-pattern +Halftone Pattern. Available only for the JX-330 series scanners. +Possible settings: +.IR none ", " "Dither Bayer" ", " "Dither Spiral" ", " "Dither Dispersed" +and +.IR "Error Diffusion" . +The default value is +.IR none . + +.TP +.B \-\-source +Paper Source. This option is only available if an automatic document +feeder or a transparency adapter is installed. Possible settings are: +.IR Flatbed ", " "Automatic Document Feeder" , +and +.IR "Transparency Adapter" . +If an ADF or a transparency adapter is installed, using it is the +default selection. + +.TP +.B \-\-custom\-gamma +Custom Gamma This option determines whether a builtin or a custom +gamma table is used. Possible settings are: +.I yes +(enables custom gamma tables) or +.I no +(enables a built gamma table). + +.TP +.B \-\-gamma +Gamma. This option is only available if +.B Custom Gamma +is set to +.IR no . +Possible values are: +.IR 1.0 " or " 2.2 "." +The default value is +.IR 2.2 . +(The JX-250 and JX-350 have no built in gamma +correction; for these scanners, a gamma table is downloaded to the scanner +by the backend.) + +.TP +.B \-\-gamma\-table +Gamma Table. Allowed values: 0..255; 256 numbers must be defined. +The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). This table +is only used for gray scale scans. + +.TP +.B \-\-red\-gamma\-table +Red Gamma Table. Allowed values: 0..255; 256 numbers must be defined. +The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). + +.TP +.B \-\-green\-gamma\-table +Green Gamma Table. Allowed values: 0..255; 256 numbers must be defined. +The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). + +.TP +.B \-\-blue\-gamma\-table +Blue Gamma Table. Allowed values: 0..255; 256 numbers must be defined. +The default values are 0, 1, 2, .. 255 (i.e., gamma == 1). + +.TP +.B \-\-resolution +Selects the resolution of the scanned image. Allowed values: +.I 30..600 +(JX-330, JX-350 and JX-610) and +.I 30..400 +(JX-250). +The default value is 150. + +.TP +.BR \-l ", " \-t ", " \-x ", " \-y +Scan Window. +Top-left x position of scan area +.RB ( \-l ), +top-left y position of scan area +.RB ( \-t ), +bottom right x position of scan area +.RB ( \-x ) +and bottom right y position of scan area +.RB ( \-y ). +The possible settings depend on the scanner model and, for the +JX-250 and the JX-350, also on the usage of the automatic document feeder resp. the +transparency adapter. Please refer to the values allowed by +.BR xscanimage (1), +or +.BR xsane (1). +With +.BR scanimage (1), +enter one of the following commands in order to see the allowed parameter values for +the scan window: + +.RS +scanimage \-d sharp \-\-source "Automatic Document Feeder" \-\-help + +scanimage \-d sharp \-\-source Flatbed \-\-help + +scanimage \-d sharp \-\-source "Transparency Adapter" \-\-help +.RE + +.TP +.B \-\-edge emphasis +Edge emphasis. This option is not available for the JX-250 and the JX-350. +Possible settings: +.IR None ", " Middle ", " Strong ", and " Blur . +The default value is +.IR None . + +.TP +.B \-\-threshold +Sets the threshold for black and white pixels in lineart mode. +Possible values are 1..255. +The default value is 128. +This option is only available in scan mode +.IR lineart . + +.TP +.B \-\-threshold-red +Sets the threshold for the red component of a pixel in +in lineart color scan mode. Possible values are 1..255. +The default value is 128. +This option is only available in scan mode color +.IR lineart . + +.TP +.B \-\-threshold-green +Sets the threshold for the green component of a pixel in +in lineart color scan mode. Possible values are 1..255. +The default value is 128. +This option is only available in scan mode color +.I lineart . + +.TP +.B \-\-threshold-blue +Sets the threshold for the blue component of a pixel in +in lineart color scan mode. Possible values are 1..255. +The default value is 128. +This option is only available in scan mode color +.IR lineart . + +.TP +.B \-\-lightcolor +Sets the color of the light source. Possible values are +.IR white , +.IR red , +.I green +and +.IR blue . +The default value is +.IR white . +This option is only available in scan modes +.I "lineart color" +and +.IR color . + +.SH ADF USAGE +If a paper jam occurrs, the maintenance cover +.I +must +be opened and closed, even if the jammed paper can be removed without opening +the maintenance cover. Otherwise, the error condition will not be cleared. + +.SH CONFIGURATION +The contents of the +.I sharp.conf +file is a list of options and device names that correspond to Sharp +scanners. Empty lines and lines beginning with a hash mark (#) are +ignored. See +.BR sane\-scsi (5) +for details about device names. +.PP +Lines setting an option start with the key word +.B option, +followed by the option's name and the option's value. At present, three +options are defined: +.B buffers, buffersize, +and +.B readqueue. +.PP +Options defined at the start of +.I sharp.conf +apply to all devices; options defined after a +device name apply to this device. +.PP +The options +.B buffers +and +.B +readqueue +are only significant if the backend has been compiled +so that for each scan a second process is forked (switch +.B USE_FORK +in +.I sharp.c +). This process reads the +scan data from the scanner and writes this data into a block of shared memory. +The parent process reads the data from this memory block and delivers it +to the frontend. The options control the size and usage of this shared +memory block. +.PP +.B option buffers +defines the number of buffers used. The smallest number allowed is 2. +.PP +.B option buffersize +defines the size of one buffer. Since each buffer is filled with a +single read command sent to the scanner, its size is limited automatically +to the size allowed by the operating system or by the Sane SCSI library +for SCSI read commands. A buffer size of 128 kB or 256 kB is recommended +for scan resolutions of 300 dpi and above. +.PP +.B option readqueue +defines how many read commands to be sent to the scanner +are queued. At present, the Sane SCSI library supports queued read +commands only for for Linux. For other operating systems, +.B option readqueue +should be set to 0. For Linux, +.B option readqueue +should be set to 2. Larger values than 2 for +.B option readqueue +are not reasonable in most cases. +.B option buffers +should be greater than +.B option readqueue. + +.SH Performance Considerations +This section focuses on the problem of stops of the scanner's carriage +during a scan. Carriage stops happen mainly with the JX-250. This scanner +has obviously only a small internal buffer compared to its speed. That +means that the backend must read the data as fast as possible from the +scanner in order to avoid carriage stops. +.PP +Even the JX-250 needs only less than 10 seconds for a 400 dpi A4 gray +scale scan, which results in a data transfer rate of more than 1.6 MB +per second. This means that the data produced by the scanner must be +processed fairly fast. Due to the small internal buffer of the JX-250, +the backend must issue a read request for the next data block as soon +as possible after reading a block of data in order to avoid carriage +stops. +.PP +Stops of the carriage can be caused by the following reasons: +.PP +.RS +\- too much "traffic" on the SCSI bus +.br +\- slow responses by the backend to the scanner, +.br +\- a program which processes the data acquired by the backend too slow. +.PP +.RE +Too much "traffic" on the SCSI bus: This happens for example, if hard disks +are connected to the same SCSI bus as the scanner, and when data transfer +from/to these hard disks requires a considerable part of the SCSI bandwidth +during a scan. If this is the case, you should consider to connect the +scanner to a separate SCSI adapter. +.PP +Slow responses by the backend to the scanner: Unfortunately, +UNIX-like operating systems generally have no real time capabilities. +Thus there is no guarantee that the backend is under any circumstances +able to communicate with the scanner as fast as required. To minimize this +problem, the backend should be compiled so that a separate reader process +is forked: Make sure that +.B USE_FORK +is defined when you compile +.I sharp.c. +If slow responses of the backend remain to be problem, you could try to +reduce the load of the system. Even while the backend and the reader +process need only a minor amount of processor time, other running +processes can cause an increase in the time delay between two time +slices given to the reader process. On slower systems, such an +increased delay can be enough to cause a carriage stop with the JX-250. +For Linux, the usage of the SG driver version 2.1.36 or above is +recommended, because it supports, in combination with +the SCSI library of Sane version 1.0.2, command queueing within the kernel. +This queueing implementation, combined with a buffer size of at least +128 kB, should avoid most carriage stops. +.PP +Slow processing of the scan data: An example for this situation is +the access to the scanner via a 10 MBit Ethernet, which is definitely +too slow to transfer the scan data as fast as they are produced by the +scanner. If you have enough memory available, you can increase +.B option buffers, +so that an entire image can be stored in these buffers. +.PP +In order to see, if the backend is too slow or if the further processing +of the data is too slow, set the environment variable +.B SANE_DEBUG_SHARP +to 1. When a scan is finished, the backend writes the line "buffer full +conditions: +.IR nn """ +to stderr. If +.I nn +is zero, carriage stops are caused by too slow responses of the backend +or too much "traffic" on the SCSI bus. If +.I nn +is greater than zero, the backend had to wait +.I nn +times until a buffer has been processed by the frontend. (Please note that +.B option buffers +must be greater than +.B option readqueue +in order to get useful output for "buffer full conditions".) + +.SH FILES +.TP +.I /etc/sane.d/sharp.conf +The backend configuration file. +.TP +.I /usr/lib/x86_64-linux-gnu/sane/libsane\-sharp.a +The static library implementing this backend. +.TP +.I /usr/lib/x86_64-linux-gnu/sane/libsane\-sharp.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_SHARP +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller +levels reduce verbosity. +.SH KNOWN PROBLEMS +1. ADF Mode +.RS +After several ADF scans, the scanner moves the carriage back to the idle +position and back to ADF scan position, before a scan starts. We do not +know, if this is a problem of the scanner, or if this is a bug of the +backend. At present, the scanner must power off and on to stop this +annoying behaviour. +.RE + +2. Threshold level does not work (only JX-610) +.PP +3. The maximum resolution is limited to 600 dpi(JX-610 supported +to 1200 dpi) resp. 400 dpi (JX-250) +.PP +4. If the JX250 is used with an ADF, the following situation can occur: After +several scans, the scanner moves, after loading a new sheet of paper, the +carriage to the idle position, and then back to the position used for ADF +scans. This happens for +.I +every +scan, in contrast to the calibration, which is done after 10 scans. (For the +calibration, the carriage is also moved to the idle position.) We do not +know if this behavior is caused by the backend, or if it is a bug in the +firmware of the scanner. +.PP +5. Usage of a transparency adapter (film scan unit) is supported, but not +tested. + +.SH "SEE ALSO" +.BR sane (7), +.BR sane\-scsi (5) + +.SH AUTHORS +Kazuya Fukuda, Abel Deuring + +.SH CREDITS +The Sharp backend is based on the Canon backend written by Helmut Koeberle +.PP +Parts of this man page are a plain copy of +.BR sane\-mustek (5) +by David Mosberger-Tang, Andreas Czechanowski and Andreas Bolsch |