diff options
Diffstat (limited to 'upstream/fedora-rawhide/man5/proc_pid_stat.5')
| -rw-r--r-- | upstream/fedora-rawhide/man5/proc_pid_stat.5 | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/upstream/fedora-rawhide/man5/proc_pid_stat.5 b/upstream/fedora-rawhide/man5/proc_pid_stat.5 new file mode 100644 index 00000000..85f42135 --- /dev/null +++ b/upstream/fedora-rawhide/man5/proc_pid_stat.5 @@ -0,0 +1,380 @@ +.\" Copyright (C) 1994, 1995, Daniel Quinlan <quinlan@yggdrasil.com> +.\" Copyright (C) 2002-2008, 2017, Michael Kerrisk <mtk.manpages@gmail.com> +.\" Copyright (C) 2023, Alejandro Colomar <alx@kernel.org> +.\" +.\" SPDX-License-Identifier: GPL-3.0-or-later +.\" +.TH proc_pid_stat 5 2023-08-15 "Linux man-pages 6.06" +.SH NAME +/proc/pid/stat \- status information +.SH DESCRIPTION +.TP +.IR /proc/ pid /stat +Status information about the process. +This is used by +.BR ps (1). +It is defined in the kernel source file +.IR fs/proc/array.c "." +.IP +The fields, in order, with their proper +.BR scanf (3) +format specifiers, are listed below. +Whether or not certain of these fields display valid information is governed by +a ptrace access mode +.BR PTRACE_MODE_READ_FSCREDS " | " PTRACE_MODE_NOAUDIT +check (refer to +.BR ptrace (2)). +If the check denies access, then the field value is displayed as 0. +The affected fields are indicated with the marking [PT]. +.RS +.TP +(1) \fIpid\fP \ %d +.br +The process ID. +.TP +(2) \fIcomm\fP \ %s +The filename of the executable, in parentheses. +Strings longer than +.B TASK_COMM_LEN +(16) characters (including the terminating null byte) are silently truncated. +This is visible whether or not the executable is swapped out. +.TP +(3) \fIstate\fP \ %c +One of the following characters, indicating process state: +.RS +.TP +R +Running +.TP +S +Sleeping in an interruptible wait +.TP +D +Waiting in uninterruptible +disk sleep +.TP +Z +Zombie +.TP +T +Stopped (on a signal) or (before Linux 2.6.33) trace stopped +.TP +t +.\" commit 44d90df6b757c59651ddd55f1a84f28132b50d29 +Tracing stop (Linux 2.6.33 onward) +.TP +W +Paging (only before Linux 2.6.0) +.TP +X +Dead (from Linux 2.6.0 onward) +.TP +x +.\" commit 44d90df6b757c59651ddd55f1a84f28132b50d29 +Dead (Linux 2.6.33 to +.\" commit 74e37200de8e9c4e09b70c21c3f13c2071e77457 +3.13 only) +.TP +K +.\" commit 44d90df6b757c59651ddd55f1a84f28132b50d29 +Wakekill (Linux 2.6.33 to +.\" commit 74e37200de8e9c4e09b70c21c3f13c2071e77457 +3.13 only) +.TP +W +.\" commit 44d90df6b757c59651ddd55f1a84f28132b50d29 +Waking (Linux 2.6.33 to +.\" commit 74e37200de8e9c4e09b70c21c3f13c2071e77457 +3.13 only) +.TP +P +.\" commit f2530dc71cf0822f90bb63ea4600caaef33a66bb +Parked (Linux 3.9 to +.\" commit 74e37200de8e9c4e09b70c21c3f13c2071e77457 +3.13 only) +.TP +I +.\" commit 06eb61844d841d0032a9950ce7f8e783ee49c0d0 +Idle (Linux 4.14 onward) +.RE +.TP +(4) \fIppid\fP \ %d +The PID of the parent of this process. +.TP +(5) \fIpgrp\fP \ %d +The process group ID of the process. +.TP +(6) \fIsession\fP \ %d +The session ID of the process. +.TP +(7) \fItty_nr\fP \ %d +The controlling terminal of the process. +(The minor device number is contained in the combination of bits +31 to 20 and 7 to 0; +the major device number is in bits 15 to 8.) +.TP +(8) \fItpgid\fP \ %d +.\" This field and following, up to and including wchan added 0.99.1 +The ID of the foreground process group of the controlling +terminal of the process. +.TP +(9) \fIflags\fP \ %u +The kernel flags word of the process. +For bit meanings, +see the PF_* defines in the Linux kernel source file +.IR include/linux/sched.h . +Details depend on the kernel version. +.IP +The format for this field was %lu before Linux 2.6. +.TP +(10) \fIminflt\fP \ %lu +The number of minor faults the process has made which have not +required loading a memory page from disk. +.TP +(11) \fIcminflt\fP \ %lu +The number of minor faults that the process's +waited-for children have made. +.TP +(12) \fImajflt\fP \ %lu +The number of major faults the process has made which have +required loading a memory page from disk. +.TP +(13) \fIcmajflt\fP \ %lu +The number of major faults that the process's +waited-for children have made. +.TP +(14) \fIutime\fP \ %lu +Amount of time that this process has been scheduled in user mode, +measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +This includes guest time, \fIguest_time\fP +(time spent running a virtual CPU, see below), +so that applications that are not aware of the guest time field +do not lose that time from their calculations. +.TP +(15) \fIstime\fP \ %lu +Amount of time that this process has been scheduled in kernel mode, +measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +.TP +(16) \fIcutime\fP \ %ld +Amount of time that this process's +waited-for children have been scheduled in user mode, +measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +(See also +.BR times (2).) +This includes guest time, \fIcguest_time\fP +(time spent running a virtual CPU, see below). +.TP +(17) \fIcstime\fP \ %ld +Amount of time that this process's +waited-for children have been scheduled in kernel mode, +measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +.TP +(18) \fIpriority\fP \ %ld +(Explanation for Linux 2.6) +For processes running a real-time scheduling policy +.RI ( policy +below; see +.BR sched_setscheduler (2)), +this is the negated scheduling priority, minus one; +that is, a number in the range \-2 to \-100, +corresponding to real-time priorities 1 to 99. +For processes running under a non-real-time scheduling policy, +this is the raw nice value +.RB ( setpriority (2)) +as represented in the kernel. +The kernel stores nice values as numbers +in the range 0 (high) to 39 (low), +corresponding to the user-visible nice range of \-20 to 19. +.IP +Before Linux 2.6, this was a scaled value based on +the scheduler weighting given to this process. +.\" And back in Linux 1.2 days things were different again. +.TP +(19) \fInice\fP \ %ld +The nice value (see +.BR setpriority (2)), +a value in the range 19 (low priority) to \-20 (high priority). +.\" Back in Linux 1.2 days things were different. +.\" .TP +.\" \fIcounter\fP %ld +.\" The current maximum size in jiffies of the process's next timeslice, +.\" or what is currently left of its current timeslice, if it is the +.\" currently running process. +.\" .TP +.\" \fItimeout\fP %u +.\" The time in jiffies of the process's next timeout. +.\" timeout was removed sometime around 2.1/2.2 +.TP +(20) \fInum_threads\fP \ %ld +Number of threads in this process (since Linux 2.6). +Before Linux 2.6, this field was hard coded to 0 as a placeholder +for an earlier removed field. +.TP +(21) \fIitrealvalue\fP \ %ld +The time in jiffies before the next +.B SIGALRM +is sent to the process due to an interval timer. +Since Linux 2.6.17, this field is no longer maintained, +and is hard coded as 0. +.TP +(22) \fIstarttime\fP \ %llu +The time the process started after system boot. +Before Linux 2.6, this value was expressed in jiffies. +Since Linux 2.6, the value is expressed in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +.IP +The format for this field was %lu before Linux 2.6. +.TP +(23) \fIvsize\fP \ %lu +Virtual memory size in bytes. +.TP +(24) \fIrss\fP \ %ld +Resident Set Size: number of pages the process has in real memory. +This is just the pages which +count toward text, data, or stack space. +This does not include pages +which have not been demand-loaded in, or which are swapped out. +This value is inaccurate; see +.IR /proc/ pid /statm +below. +.TP +(25) \fIrsslim\fP \ %lu +Current soft limit in bytes on the rss of the process; +see the description of +.B RLIMIT_RSS +in +.BR getrlimit (2). +.TP +(26) \fIstartcode\fP \ %lu \ [PT] +The address above which program text can run. +.TP +(27) \fIendcode\fP \ %lu \ [PT] +The address below which program text can run. +.TP +(28) \fIstartstack\fP \ %lu \ [PT] +The address of the start (i.e., bottom) of the stack. +.TP +(29) \fIkstkesp\fP \ %lu \ [PT] +The current value of ESP (stack pointer), as found in the +kernel stack page for the process. +.TP +(30) \fIkstkeip\fP \ %lu \ [PT] +The current EIP (instruction pointer). +.TP +(31) \fIsignal\fP \ %lu +The bitmap of pending signals, displayed as a decimal number. +Obsolete, because it does not provide information on real-time signals; use +.IR /proc/ pid /status +instead. +.TP +(32) \fIblocked\fP \ %lu +The bitmap of blocked signals, displayed as a decimal number. +Obsolete, because it does not provide information on real-time signals; use +.IR /proc/ pid /status +instead. +.TP +(33) \fIsigignore\fP \ %lu +The bitmap of ignored signals, displayed as a decimal number. +Obsolete, because it does not provide information on real-time signals; use +.IR /proc/ pid /status +instead. +.TP +(34) \fIsigcatch\fP \ %lu +The bitmap of caught signals, displayed as a decimal number. +Obsolete, because it does not provide information on real-time signals; use +.IR /proc/ pid /status +instead. +.TP +(35) \fIwchan\fP \ %lu \ [PT] +This is the "channel" in which the process is waiting. +It is the address of a location in the kernel where the process is sleeping. +The corresponding symbolic name can be found in +.IR /proc/ pid /wchan . +.TP +(36) \fInswap\fP \ %lu +.\" nswap was added in Linux 2.0 +Number of pages swapped (not maintained). +.TP +(37) \fIcnswap\fP \ %lu +.\" cnswap was added in Linux 2.0 +Cumulative \fInswap\fP for child processes (not maintained). +.TP +(38) \fIexit_signal\fP \ %d \ (since Linux 2.1.22) +Signal to be sent to parent when we die. +.TP +(39) \fIprocessor\fP \ %d \ (since Linux 2.2.8) +CPU number last executed on. +.TP +(40) \fIrt_priority\fP \ %u \ (since Linux 2.5.19) +Real-time scheduling priority, a number in the range 1 to 99 for +processes scheduled under a real-time policy, +or 0, for non-real-time processes (see +.BR sched_setscheduler (2)). +.TP +(41) \fIpolicy\fP \ %u \ (since Linux 2.5.19) +Scheduling policy (see +.BR sched_setscheduler (2)). +Decode using the SCHED_* constants in +.IR linux/sched.h . +.IP +The format for this field was %lu before Linux 2.6.22. +.TP +(42) \fIdelayacct_blkio_ticks\fP \ %llu \ (since Linux 2.6.18) +Aggregated block I/O delays, measured in clock ticks (centiseconds). +.TP +(43) \fIguest_time\fP \ %lu \ (since Linux 2.6.24) +Guest time of the process (time spent running a virtual CPU +for a guest operating system), measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +.TP +(44) \fIcguest_time\fP \ %ld \ (since Linux 2.6.24) +Guest time of the process's children, measured in clock ticks (divide by +.IR sysconf(_SC_CLK_TCK) ). +.TP +(45) \fIstart_data\fP \ %lu \ (since Linux 3.3) \ [PT] +.\" commit b3f7f573a20081910e34e99cbc91831f4f02f1ff +Address above which program initialized and +uninitialized (BSS) data are placed. +.TP +(46) \fIend_data\fP \ %lu \ (since Linux 3.3) \ [PT] +.\" commit b3f7f573a20081910e34e99cbc91831f4f02f1ff +Address below which program initialized and +uninitialized (BSS) data are placed. +.TP +(47) \fIstart_brk\fP \ %lu \ (since Linux 3.3) \ [PT] +.\" commit b3f7f573a20081910e34e99cbc91831f4f02f1ff +Address above which program heap can be expanded with +.BR brk (2). +.TP +(48) \fIarg_start\fP \ %lu \ (since Linux 3.5) \ [PT] +.\" commit 5b172087f99189416d5f47fd7ab5e6fb762a9ba3 +Address above which program command-line arguments +.RI ( argv ) +are placed. +.TP +(49) \fIarg_end\fP \ %lu \ (since Linux 3.5) \ [PT] +.\" commit 5b172087f99189416d5f47fd7ab5e6fb762a9ba3 +Address below program command-line arguments +.RI ( argv ) +are placed. +.TP +(50) \fIenv_start\fP \ %lu \ (since Linux 3.5) \ [PT] +.\" commit 5b172087f99189416d5f47fd7ab5e6fb762a9ba3 +Address above which program environment is placed. +.TP +(51) \fIenv_end\fP \ %lu \ (since Linux 3.5) \ [PT] +.\" commit 5b172087f99189416d5f47fd7ab5e6fb762a9ba3 +Address below which program environment is placed. +.TP +(52) \fIexit_code\fP \ %d \ (since Linux 3.5) \ [PT] +.\" commit 5b172087f99189416d5f47fd7ab5e6fb762a9ba3 +The thread's exit status in the form reported by +.BR waitpid (2). +.RE +.SH SEE ALSO +.BR proc (5), +.BR proc_pid_status (5) |