diff options
Diffstat (limited to 'upstream/opensuse-leap-15-6/man5/sane-p5.5')
| -rw-r--r-- | upstream/opensuse-leap-15-6/man5/sane-p5.5 | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/upstream/opensuse-leap-15-6/man5/sane-p5.5 b/upstream/opensuse-leap-15-6/man5/sane-p5.5 new file mode 100644 index 00000000..60e405a4 --- /dev/null +++ b/upstream/opensuse-leap-15-6/man5/sane-p5.5 @@ -0,0 +1,162 @@ +.TH "sane\-p5" "5" "15 Feb 2010" "" "SANE Scanner Access Now Easy" +.IX sane\-p5 +.SH "NAME" +sane\-p5 \- SANE backend for the Primax PagePartner +.SH "DESCRIPTION" +The +.B sane\-p5 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to the Primax PagePartner parallel port sheet fed scanner. +.PP +This backend handles 100, 150, 200, 300 and 600 dpi scan resolutions, +in color and gray modes. The 600 dpi is actually 300x600 with lines +enlarged to match the vertical resolution. +.PP +.B EPP/ECP MODES ONLY +The current version of the backend uses only EPP or ECP mode to communicate +with the scanner. It is +recommended that you set your parallel port to EPP in BIOS with the current +version of this backend. ECPEPP will only +work if you use a 2.4 or 2.6 kernel with ppdev character device support. +.PP + +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I port value +.RE +.PP +Where +\fBvalue\fR is : + +.RS +.TP +auto +autodetect all parallel ports and probe +them for scanner +.TP +/dev/parport0 +uses linux ppdev device, depending on the +number of available parallel port, you +have to use /dev/parport1, /dev/parport2, ... +.PP +.RE +You can rename any device using the +.PP +.RS +.br +.I option name my_name +.RE +.PP +option. This option apply to the last port option. + +.SH "CONFIGURATION" +Please make sure to edit +.I dll.conf +.B before +you use the backend, since this backend isn't enabled by default. +.PP + +.SH "FILES" +.TP +.I /etc/sane.d/p5.conf +The backend configuration file (see also description of +.B SANE_CONFIG_DIR +below). +.TP +.I /usr/lib64/sane/libsane\-p5.a +The static library implementing this backend. +.TP +.I /usr/lib64/sane/libsane\-p5.so +The shared library implementing this backend (present on systems that +support dynamic loading). + +.SH "ENVIRONMENT" +.TP +.B SANE_CONFIG_DIR +This environment variable specifies the list of directories that may +contain the configuration file. Under UNIX, the directories are +separated by a colon (`:'), under OS/2, they are separated by a +semi-colon (`;'). If this variable is not set, the configuration file +is searched in two default directories: first, the current working +directory (".") and then in +.IR /etc/sane.d . +If the value of the +environment variable ends with the directory separator character, then +the default directories are searched after the explicitly specified +directories. For example, setting +.B SANE_CONFIG_DIR +to "/tmp/config:" would result in directories +.IR "tmp/config" , +.IR "." , +and +.I "/etc/sane.d" +being searched (in this order). +.TP +.B SANE_DEBUG_P5 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 255 requests all debug output to be printed. Smaller +levels reduce verbosity. + +.PP +.RS +.ft CR +.nf +level debug output +\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- + 0 critical errors + 1 errors + 2 warnings & minor errors + 4 information messages + 8 start/stop of functions + 16 tracing messages + 32 I/O functions + 64 I/O functions with traces + 128 scanned/calibration data +.fi +.ft R + +.SH "SEE ALSO" +.BR sane (7), +.BR sane\-net (5), +.BR saned (8), +.BR scanimage (1) + +.SH "AUTHOR" +St\['e]phane Voltz +.RI < stef.dev@free.fr > + +.SH "CREDITS" +Support for the Prima PagePartner has been made possible thank to an hardware donation +by S\['e]bastien Lange. + +.SH "BUG REPORTS" +If something doesn't work mail sane-devel@alioth-lists.debian.net or submit an +issue via +.I https://gitlab.com/sane-project/backends/issues/new +with a label of backend/p5. +Please give as much information as you can. + +.TP +.I SANE version +run "scanimage \-V" to determine this +.TP +.I the backend version and your scanner hardware +run +.I "SANE_DEBUG_P5=255 scanimage \-L 2>log" +as root. If you don't get any output from the p5 backend, make sure a line "p5" is included into +your +.IR /etc/sane.d/dll.conf . +If your scanner isn't detected, make sure you've defined the right port address, or the +correct device +in your p5.conf. +.TP +.I the name of your scanner/vendor +also a worthy information. Please also include the optical resolution and lamp type of your +scanner, both can be found in the manual of your scanner. +.TP +.I any further comments +if you have comments about the documentation (what could be done better), or you +think I should know something, please include it. |