diff options
Diffstat (limited to 'upstream/opensuse-leap-15-6/man5/sane-teco1.5')
| -rw-r--r-- | upstream/opensuse-leap-15-6/man5/sane-teco1.5 | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/upstream/opensuse-leap-15-6/man5/sane-teco1.5 b/upstream/opensuse-leap-15-6/man5/sane-teco1.5 new file mode 100644 index 00000000..0da0809d --- /dev/null +++ b/upstream/opensuse-leap-15-6/man5/sane-teco1.5 @@ -0,0 +1,196 @@ +.TH sane\-teco1 5 "14 Jul 2008" "" "SANE Scanner Access Now Easy" +.IX sane\-teco1 +.SH NAME +sane\-teco1 \- SANE backend for TECO / RELISYS scanners +.SH DESCRIPTION +The +.B sane\-teco1 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to some TECO SCSI flatbed scanners. This backend +should be considered +.B beta-quality +software! TECO scanners are sold under +various brands like RELISYS, PIOTECH, TRUST. This backend may or +may not support yours. +.PP +The scanners that should work with this backend are: +.PP +.RS +.ft CR +.nf + Vendor Model TECO model status +---------------------- -------------- ----------- + Relisys AVEC 2400 VM3520 tested + Relisys AVEC 2412 VM3520+ tested + Relisys AVEC 4800 VM4530 untested + Relisys AVEC 4816 VM4530+ untested + Relisys RELI 2400 VM3530 untested + Relisys RELI 2412 VM3530+ tested + Relisys RELI 2412 VM3530+ untested + Relisys RELI 4816 VM4540 tested + Relisys RELI 4830 VM4542 tested + Relisys RELI 9600 VM6530 untested + Relisys RELI 9612 VM6530* untested + Relisys RELI 9624 VM6530+ untested + Relisys RELI 9630 VM6540 untested + Relisys RELI DS15 VM3440 untested + Relisys RELI DS6 VM3420 untested + Dextra DF-600P VM3510 tested + Dextra DF-4830T VM4542 untested + Dextra DF-1200T+ VM3530+ untested + Dextra DF-9624 VM6530+ untested +.fi +.ft R +.RE + +Note that the untested scanner will not be directly supported. You +should contact the author for that. + +The TECO VM number can usually be found at the back of the scanner. It +is also part of the FCC ID. +.I sane\-find\-scanner \-v +will also show the +SCSI inquiry, and if it is a TECO scanner, the name will be there too. + +The options the backend supports can either be selected through +command line options to programs like +.BR scanimage (1) +or through GUI +elements in +.BR xscanimage (1) +or +.BR xsane (1). + +.br +If you have any success with a scanner not listed here, or if you notice +any strange behavior, please report to the backend maintainer or to +the SANE mailing list. + +Valid command line options and their syntax can be listed by using: + +.RS +scanimage \-\-help \-d teco1 +.RE + +.TP +.B Scan Mode + +.TP +.B \-\-mode Black & White|Grayscale|Color +Selects the basic mode of operation of the scanner valid choices are +The +.I Black & White +mode is black and white only (1 bit). +.I Grayscale +will produce 256 levels of gray (8 bits). +.I Color +will produce a 24 bits color image. + +.TP +.B \-\-resolution 1..600 +Selects the resolution for a scan. The scanner can do all resolutions +between 1 and 600, in increments of 1. + + +.TP +.B Geometry options + +.TP +.B \-l \-t \-x \-y +Controls the scan area: +.B \-l +sets the top left x coordinate, +.B \-t +the top left y coordinate, +.B \-x +selects the width and +.B \-y +the height of the scan area. All parameters are specified in millimeters by default. + + +.TP +.B Enhancement options + +.TP +.B \-\-custom\-gamma +(color mode only) allows the user to specify a gamma table (see the +next 3 parameters). + +.TP +.B \-\-red\-gamma\-table +Can be used to download a user defined gamma table for the red channel. +The table must be 256 bytes long. Color mode only. + +.TP +.B \-\-green\-gamma\-table +Can be used to download a user defined gamma table for the green channel. +The table must be 256 bytes long. Color mode only. + +.TP +.B \-\-blue\-gamma\-table +Can be used to download a user defined gamma table for the blue channel. +The table must be 256 bytes long. Color mode only. + +.TP +.B \-\-dither Line art|2x2|3x3|4x4 bayer|4x4 smooth|8x8 bayer|8x8 smooth|8x8 horizontal|8x8 vertical +Select the dither mask to use. Black & White only. + + +.TP +.B \-\-preview +Requests a preview scan. The resolution used is 22 dpi +and the scan area is the maximum allowed. The scan mode is user +selected. The default is "no". + + +.SH CONFIGURATION FILE +The configuration file +.I /etc/sane.d/teco1.conf +supports only one item: the device name to use (eg +.IR /dev/scanner ). + + +.SH FILES +.TP +.I /usr/lib64/sane/libsane\-teco1.a +The static library implementing this backend. +.TP +.I /usr/lib64/sane/libsane\-teco1.so +The shared library implementing this backend (present on systems that +support dynamic loading). + + +.SH ENVIRONMENT +.TP +.B SANE_DEBUG_TECO1 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 128 requests all debug output to be printed. Smaller levels +reduce verbosity. + + +.SH LIMITATIONS +The windows TWAIN driver has many more options than this SANE +backend. However they are only software adjustments. This backend only +implements what the scanner can support. + + +.SH BUGS +None known. + +.SH "SEE ALSO" +.BR sane\-scsi (5), +.BR scanimage (1), +.BR xscanimage (1), +.BR xsane (1), +.BR sane (7) + +.SH AUTHOR +.TP +The package is actively maintained by Frank Zago. +.I http://www.zago.net/sane/#teco + +.SH CREDITS + +Thanks to Gerard Delafond for the VM4542 support. +Thanks to Jean-Yves Simon for the VM3510 support. |