diff options
Diffstat (limited to 'upstream/opensuse-tumbleweed/man5/sane-microtek2.5')
| -rw-r--r-- | upstream/opensuse-tumbleweed/man5/sane-microtek2.5 | 321 |
1 files changed, 321 insertions, 0 deletions
diff --git a/upstream/opensuse-tumbleweed/man5/sane-microtek2.5 b/upstream/opensuse-tumbleweed/man5/sane-microtek2.5 new file mode 100644 index 00000000..d02bd615 --- /dev/null +++ b/upstream/opensuse-tumbleweed/man5/sane-microtek2.5 @@ -0,0 +1,321 @@ +.TH sane\-microtek2 5 "13 Jul 2008" "" "SANE Scanner Access Now Easy" +.SH NAME +sane\-microtek2 \- SANE backend for Microtek scanners with SCSI-2 command set +.SH DESCRIPTION +The +.B sane\-microtek2 +library implements a SANE (Scanner Access Now Easy) backend that +provides access to Microtek scanners with a SCSI-2 command set. +This backend can be considered alpha to beta. Some scanner models are reported +to work well, others not. New development versions of this backend can be +obtained from +.IR http://karstenfestag.gmxhome.de . +.PP +There exists a different backend for Microtek scanners with SCSI-1 command +set. +Refer to +.BR sane\-microtek (5) +for details. +.PP +And there is work in progress for the ScanMaker 3600. +See +.IR http://sourceforge.net/projects/sm3600 . +.PP +At present, the following scanners are known positively to work with this +backend: +.PP +.ft CR +.nf +Vendor Product id Remark +-------------------------------------------------------------------- +Microtek E3+ Parport and SCSI +Microtek X6 SCSI +Microtek X6EL SCSI +Microtek X6USB USB +Microtek ScanMaker V300 Parport and SCSI +Microtek ScanMaker V310 Parport and SCSI +Microtek ScanMaker V600 Parport and SCSI +Microtek ScanMaker 330 SCSI +Microtek ScanMaker 630 SCSI +Microtek ScanMaker 636 SCSI +Microtek ScanMaker 9600XL SCSI; only flatbed mode? +Microtek Phantom 330CX Parport +Microtek SlimScan C3 Parport +Microtek SlimScan C6 USB +Microtek Phantom 636 SCSI +Microtek Phantom 636CX Parport +Microtek V6USL SCSI and USB +Microtek V6UPL USB; not stable +Microtek X12USL SCSI; only 8bit color, work in progress +Vobis HighScan SCSI (E3+ based models) +Scanport SQ300 Parport? +Scanport SQ4836 SCSI +Scanpaq SQ2030 Parport +.fi +.ft R +.PP +Additional information can be found at +.IR http://www.sane\-project.org/ . +.PP +If you own a Microtek scanner other than the ones listed above, +it may or may not work with SANE! Because equal scanners are sold under +different names in different countries your model may be equivalent to one of +the above. +.PP +The parport scanners work with the ppscsi + onscsi kernel modules. See +.I http://cyberelk.net/tim/parport/ppscsi.html +and +.IR http://penguin-breeder.org/kernel/download/ . + +.PP +The USB scanners work with the microtek kernel module. You may have to add the +vendor and model codes to microtek.c if they aren't yet listed there. +.PP +Both parport and USB scanners need the generic SCSI support, so check if you +have loaded the scsi_mod and sg modules! +.PP +If you try your scanner for the first time keep an eye on it. If it gets +commands that it doesn't understand the scanhead may go beyond the scan area. +The scanner then makes strange noises. In this case immediately switch off +the scanner or disconnect its power cable to prevent damages! +.PP +If your scanner is a different one than the models mentioned above and it is +working please tell the author about it. It would be nice if you add a logfile +to this information (creation of the logfile: see below). +.PP +If your scanner is not working properly you also should create a logfile and +send it to the author. He will use the information to improve the backend and +possibly make your scanner work. +.PP +.br +How to create the logfile? +.TP +\- put the line +.br +"option dump 2" into your +.I microtek2.conf +file or change the existing "option dump" to "2" +.TP +\- in a terminal (bash) type +.br +"export SANE_DEBUG_MICROTEK2=30" and then +.br +"scanimage \-l0 \-t0 \-x100 \-y20 2>scan.log >sout.pnm" +.br +You get two files: scan.log contains the logfile and sout.pnm the scanned +image (if there was scanned something). Zip them before sending. + +.SH "FRONTEND OPTIONS" +This backend dynamically enables the options for the frontend, that are +supported by the scanner in dependence of the scanning-mode and other +options. +Not supported options are disabled. +.PP +The following options are supported by the +.B sane\-microtek2 +driver: +.PP +Color, grayscale, halftone and lineart scans. +.PP +Highlight, midtone, shadow, contrast, brightness, exposure time control, +gamma correction, threshold (dependent of the scan mode and the scanner +capabilities) +.PP +Transparency media adapter, automatic document feeder +.PP +Additional options can be enabled or disabled in the +.I microtek2.conf +file. See the configuration section of this manpage. + +.SH "DEVICE NAMES" +This backend expects device names of the form: +.PP +.RS +.I special +.RE +.PP +Where +.I special +is the UNIX path-name for the special device that corresponds to the +scanner. The special device name must be a generic SCSI device or a +symlink to such a device. Under Linux, such a device name could be +.I /dev/sga +or +.I /dev/sge +for example. +.SH "CONFIGURATION" +The configuration file for this backend resides in +.IR /etc/sane.d/microtek2.conf . + +Its contents is a list of device names that correspond to Microtek +scanners with SCSI-2 interface. Empty lines and lines starting with +a hash mark (#) are ignored. +.PP +The configuration file may also contain options. Global options that are valid +for all devices are placed above the device names. Device-specific options +are +placed under the device name. Note that, except for option dump <n> and +option strip-height <n>, the entry in the microtek2.conf file only enables +the corresponding option for being showed in the frontend. There, in the +frontend, you can switch the options on and off. +Currently the following options are supported: +.PP +.RS +option dump <n> +.br +option strip\-height <n> +.br +option no\-backtrack\-option <on/off> +.br +option lightlid\-35 <on/off> +.br +option toggle\-lamp <on/off> +.br +option lineart\-autoadjust <on/off> +.br +option backend\-calibration <on/off> +.br +option colorbalance\-adjust <on/off> +.RE +.PP +.I option dump <n> +enables printing of additional information about the SCSI commands that are +sent to the scanner to stderr. This option is primarily useful for debugging +purpose. This option has to be a global option and is best placed at the top +of the +.I microtek2.conf +file. +.PP +If n=1 the contents of the command blocks +and the results for the INQUIRY and READ SCANNER ATTRIBUTES command are +printed to stderr. +.PP +If n=2 the contents of the command blocks for all other SCSI commands are +printed to stderr, too. If n=3 the contents of the gamma table is +printed, too. If n=4 all scan data is additionally printed to stderr. +.PP +The default is n=1. +.PP +.I option strip\-height <n> +, where <n> is a floating point number, limits the amount of data that is +read from the scanner with one read command. +The unit is inch and <n> defaults to 1.0, if this option is not set in the +configuration file. If less than <n> inch of data fit into the SCSI buffer, +then the smaller value is used and this option has no effect. +.PP +If your system has a big SCSI buffer and you want to make use of the whole +buffer, increase the value for <n>. For example, if <n> is set to 14.0, +no restrictions apply for scanners with a letter, legal or A4 sized scan area. +.PP +.PP +The following options enable or disable additional frontend options. If an +option is set to <on> an appropriate option will appear in the frontend. +.PP +.I option no\-backtrack\-option <on/off> +prevents the scanner head from moving backwards between the read commands. +This speeds up scanning. Try it. +.PP +.I option lightlid\-35 <on/off> +If you use the LightLid-35 transparency adapter you get an advanced +option which switches off the flatbed lamp during the scan. +.PP +.I option toggle\-lamp <on/off> +You get a button in the frontend where you can switch on and off the flatbed +lamp. +.PP +.I option lineart\-autoadjust <on/off> +You can tell the backend to try to determine a good value for the lineart +threshold. +.PP +.I option backend\-calibration <on/off> +Some scanners (e.g. Phantom 330CX and 636CX) need to have calibrated the data +by the backend. Try this option if you see vertical stripes in your pictures. +.PP +.I option colorbalance\-adjust <on/off> +Some scanners (e.g. Phantom 330CX and 636CX) need to have corrected +the color balance. If this option is enabled you get advanced options +where you can balance the colors. And you will have a button +to use the values that the firmware of the scanner provides. +.PP +A sample configuration file is shown below: +.PP +.RS +option dump 1 +.br +option strip\-height 1.0 +.br +/dev/scanner +.br +option no\-backtrack\-option on +.br +# this is a comment +.br +/dev/sge +.br +option lightlid\-35 on +.RE + +This backend also supports the new configuration file format which makes +it easier to detect scanners under Linux. If you have only one scanner it +would be best to use the following configuration file for this backend: +.PP +.RS +option dump 1 +.br +option strip\-height 14.0 +.br +option no\-backtrack\-option on +.br +option backend\-calibration on +.br +option lightlid\-35 on +.br +option toggle\-lamp on +.br +option lineart\-autoadjust on +.br +option colorbalance\-adjust off +.br +scsi * * Scanner +.RE + +In this case all SCSI-Scanners should be detected automatically because of the +.PP +scsi * * Scanner +.PP +line. + +.SH "FILES" +.TP +.I /etc/sane.d/microtek2.conf +The backend configuration file. +.TP +.I /usr/lib64/sane/libsane\-microtek2.a +The static library implementing this backend. +.TP +.I /usr/lib64/sane/libsane\-microtek2.so +The shared library implementing this backend (present on systems that +support dynamic loading). +.SH "ENVIRONMENT" +.TP +.B SANE_DEBUG_MICROTEK2 +If the library was compiled with debug support enabled, this +environment variable controls the debug level for this backend. E.g., +a value of 255 requests all debug output to be printed. Smaller +levels reduce verbosity. To see error messages on stderr set +.B SANE_DEBUG_MICROTEK2 +to 1 (Remark: The whole debugging levels should be better revised). +.br +E.g. just say: +.br +export SANE_DEBUG_MICROTEK2=128 + +.SH "SEE ALSO" +.BR sane\-scsi(5) , +.BR sane (7) + +.SH "AUTHORS" +Bernd Schroeder (not active anymore) +.br +Karsten Festag +.RI < karsten.festag@gmx.de >. |