diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-15 19:41:09 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-15 19:41:09 +0000 |
commit | 0db324e2e5d9d3347ea0e93138372fb65aac09e6 (patch) | |
tree | 1b794022fb98db123c73021e75286a82c116aa7f /man7/bootparam.7 | |
parent | Releasing progress-linux version 6.05.01-1~progress7.99u1. (diff) | |
download | manpages-0db324e2e5d9d3347ea0e93138372fb65aac09e6.tar.xz manpages-0db324e2e5d9d3347ea0e93138372fb65aac09e6.zip |
Merging upstream version 6.7.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'man7/bootparam.7')
-rw-r--r-- | man7/bootparam.7 | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/man7/bootparam.7 b/man7/bootparam.7 index 5514aca..f9d3c10 100644 --- a/man7/bootparam.7 +++ b/man7/bootparam.7 @@ -6,7 +6,7 @@ .\" (dated v1.0.1, 15/08/95). .\" Major update, aeb, 970114. .\" -.TH bootparam 7 2023-02-05 "Linux man-pages 6.05.01" +.TH bootparam 7 2023-10-31 "Linux man-pages 6.7" .SH NAME bootparam \- introduction to boot time parameters of the Linux kernel .SH DESCRIPTION @@ -16,7 +16,7 @@ In general, this is used to supply the kernel with information about hardware parameters that the kernel would not be able to determine on its own, or to avoid/override the values that the kernel would otherwise detect. -.PP +.P When the kernel is booted directly by the BIOS, you have no opportunity to specify any parameters. So, in order to take advantage of this possibility you have to @@ -25,13 +25,13 @@ use a boot loader that is able to pass parameters, such as GRUB. The kernel command line is parsed into a list of strings (boot arguments) separated by spaces. Most of the boot arguments have the form: -.PP +.P .in +4n .EX name[=value_1][,value_2]...[,value_10] .EE .in -.PP +.P where 'name' is a unique keyword that is used to identify what part of the kernel the associated values (if any) are to be given to. Note the limit of 10 is real, as the present code handles only 10 comma @@ -39,14 +39,14 @@ separated parameters per keyword. (However, you can reuse the same keyword with up to an additional 10 parameters in unusually complicated situations, assuming the setup function supports it.) -.PP +.P Most of the sorting is coded in the kernel source file .IR init/main.c . First, the kernel checks to see if the argument is any of the special arguments 'root=', \&'nfsroot=', 'nfsaddrs=', 'ro', 'rw', 'debug', or 'init'. The meaning of these special arguments is described below. -.PP +.P Then it walks a list of setup functions to see if the specified argument string (such as 'foo') has been associated with a setup function ('foo_setup()') for a particular @@ -57,13 +57,13 @@ if 'foo' was registered. If it was, then it would call the setup function associated with 'foo' (foo_setup()) and hand it the arguments 3, 4, 5, and 6 as given on the kernel command line. -.PP +.P Anything of the form 'foo=bar' that is not accepted as a setup function as described above is then interpreted as an environment variable to be set. A (useless?) example would be to use 'TERM=vt100' as a boot argument. -.PP +.P Any remaining arguments that were not picked up by the kernel and were not interpreted as environment variables are then passed onto PID 1, which is usually the @@ -376,12 +376,12 @@ the last process that used it has closed .IR /dev/initrd .) .SS Boot arguments for SCSI devices General notation for this section: -.PP +.P .I iobase -- the first I/O port that the SCSI host occupies. These are specified in hexadecimal notation, and usually lie in the range from 0x200 to 0x3ff. -.PP +.P .I irq -- the hardware interrupt that the card is configured to use. Valid values will be dependent on the card in question, but will @@ -389,7 +389,7 @@ usually be 5, 7, 9, 10, 11, 12, and 15. The other values are usually used for common peripherals like IDE hard disks, floppies, serial ports, and so on. -.PP +.P .I scsi\-id -- the ID that the host adapter uses to identify itself on the SCSI bus. @@ -397,7 +397,7 @@ Only some host adapters allow you to change this value, as most have it permanently specified internally. The usual default value is 7, but the Seagate and Future Domain TMC-950 boards use 6. -.PP +.P .I parity -- whether the SCSI host adapter expects the attached devices to supply a parity value with all information exchanges. @@ -553,33 +553,33 @@ geometry parameters of the second disk. Different drivers make use of different parameters, but they all at least share having an IRQ, an I/O port base value, and a name. In its most generic form, it looks something like this: -.PP +.P .in +4n .EX ether=irq,iobase[,param_1[,...param_8]],name .EE .in -.PP +.P The first nonnumeric argument is taken as the name. The param_n values (if applicable) usually have different meanings for each different card/driver. Typical param_n values are used to specify things like shared memory address, interface selection, DMA channel and the like. -.PP +.P The most common use of this parameter is to force probing for a second ethercard, as the default is to probe only for one. This can be accomplished with a simple: -.PP +.P .in +4n .EX ether=0,0,eth1 .EE .in -.PP +.P Note that the values of zero for the IRQ and I/O base in the above example tell the driver(s) to autoprobe. -.PP +.P The Ethernet-HowTo has extensive documentation on using multiple cards and on the card/driver-specific implementation of the param_n values where used. @@ -604,25 +604,25 @@ It is described in the Linux kernel source file in older kernel versions). It accepts a boot argument of the form: -.PP +.P .in +4n .EX sound=device1[,device2[,device3...[,device10]]] .EE .in -.PP +.P where each deviceN value is of the following format 0xTaaaId and the bytes are used as follows: -.PP +.P T \- device type: 1=FM, 2=SB, 3=PAS, 4=GUS, 5=MPU401, 6=SB16, 7=SB16-MPU401 -.PP +.P aaa \- I/O address in hex. -.PP +.P I \- interrupt line in hex (i.e., 10=a, 11=b, ...) -.PP +.P d \- DMA channel. -.PP +.P As you can see, it gets pretty messy, and you are better off to compile in your own personal values as recommended. Using a boot argument of @@ -659,6 +659,6 @@ lp=0. .SH SEE ALSO .BR klogd (8), .BR mount (8) -.PP +.P For up-to-date information, see the kernel source file .IR Documentation/admin\-guide/kernel\-parameters.txt . |