path: root/mysql-test/suite/handler/interface.test

#
# Tests of handler interface that are system independent
#
# Handler tests don't work yet with embedded server
#
-- source include/not_embedded.inc

--disable_warnings
drop table if exists t1,t3,t4,t5;
drop database if exists test_test;
--enable_warnings

# Run tests with myisam (any engine should be ok)

let $engine_type= MyISAM;

--source init.inc

#
# Do some syntax checking
#

handler t1 open;
--error ER_PARSE_ERROR
handler t1 read a=(SELECT 1);
--error ER_PARSE_ERROR
handler t1 read a=(1) FIRST;
--error ER_PARSE_ERROR
handler t1 read a=(1) NEXT;
--error ER_PARSE_ERROR
handler t1 read last;
handler t1 close;
drop table t1;

CREATE TABLE t1(a INT, PRIMARY KEY(a));
insert into t1 values(1),(2);
handler t1 open;
--error ER_PARSE_ERROR
handler t1 read primary=(1);
handler t1 read `primary`=(1);
handler t1 close;
drop table t1;

#
# Check if two database names beginning the same are seen as different.
#
# This database begins like the usual 'test' database.
#
create database test_test;
use test_test;
eval create table t1(table_id char(20), primary key $key_type (table_id));
insert into t1 values ('test_test.t1');
insert into t1 values ('');
handler t1 open;
handler t1 read first limit 9;
eval create table t2(table_id char(20), primary key $key_type (table_id));
insert into t2 values ('test_test.t2');
insert into t2 values ('');
handler t2 open;
handler t2 read first limit 9;
#
# This is the usual 'test' database.
#
use test;
eval create table t1(table_id char(20), primary key $key_type (table_id));
insert into t1 values ('test.t1');
insert into t1 values ('');
--error 1066
handler t1 open;
#
# Check accessibility of all the tables.
#
use test;
--error 1064
handler test.t1 read first limit 9;
--error 1064
handler test_test.t1 read first limit 9;
handler t1 read first limit 9;
--error 1064
handler test_test.t2 read first limit 9;
handler t2 read first limit 9;

#
# Cleanup.
#

--error 1064
handler test_test.t1 close;
handler t1 close;
drop table test_test.t1;
--error 1064
handler test_test.t2 close;
handler t2 close;
drop table test_test.t2;
drop database test_test;

#
use test;
--error 1064
handler test.t1 close;
--error 1109
handler t1 close;
drop table test.t1;

#
# BUG#4335 one name can be handler open'ed many times
#

create database test_test;
use test_test;
create table t1 (c1 char(20));
insert into t1 values ('test_test.t1');
create table t3 (c1 char(20));
insert into t3 values ('test_test.t3');
handler t1 open;
handler t1 read first limit 9;
handler t1 open h1;
handler h1 read first limit 9;
use test;
create table t1 (c1 char(20));
create table t2 (c1 char(20));
create table t3 (c1 char(20));
insert into t1 values ('t1');
insert into t2 values ('t2');
insert into t3 values ('t3');
--error 1066
handler t1 open;
--error 1066
handler t2 open t1;
--error 1066
handler t3 open t1;
handler t1 read first limit 9;
--error 1064
handler test.t1 close;
--error 1066
handler test.t1 open h1;
--error 1066
handler test_test.t1 open h1;
handler test_test.t3 open h3;
handler test.t1 open h2;
handler t1 read first limit 9;
handler h1 read first limit 9;
handler h2 read first limit 9;
handler h3 read first limit 9;
handler h2 read first limit 9;
--error 1064
handler test.h1 close;
handler t1 close;
handler h1 close;
handler h2 close;
--error 1109
handler t1 read first limit 9;
--error 1109
handler h1 read first limit 9;
--error 1109
handler h2 read first limit 9;
handler h3 read first limit 9;
handler h3 read first limit 9;
use test_test;
handler h3 read first limit 9;
--error 1064
handler test.h3 read first limit 9;
handler h3 close;
use test;
drop table t3;
drop table t2;
drop table t1;
drop database test_test;

#
# Bug#21587 FLUSH TABLES causes server crash when used with HANDLER statements
#

create table t1 (c1 int);
create table t2 (c1 int);
insert into t1 values (1);
insert into t2 values (2);
handler t1 open;
handler t1 read first;
connect (flush,localhost,root,,);
connection flush;
flush tables;
send flush table t1;
connect (waiter,localhost,root,,);
connection waiter;
let $wait_condition=
  select count(*) = 1 from information_schema.processlist
  where state = "Waiting for table metadata lock";
--source include/wait_condition.inc
connection default;
handler t2 open;
handler t2 read first;
handler t1 read next;
handler t1 close;
handler t2 close;
connection flush;
reap;
connection default;
drop table t1,t2;
disconnect flush;

#
# Bug#31409 RENAME TABLE causes server crash or deadlock when used with HANDLER statements
#

--disable_warnings
drop table if exists t1, t0;
--enable_warnings
create table t1 (c1 int);
handler t1 open;
handler t1 read first;
connect (flush,localhost,root,,);
connection flush;
send rename table t1 to t0;
connection waiter;
let $wait_condition=
  select count(*) = 1 from information_schema.processlist
  where state = "Waiting for table metadata lock" and
        info = "rename table t1 to t0";
--source include/wait_condition.inc
connection default;
--echo #
--echo # RENAME placed two pending locks and waits.
--echo # When HANDLER t0 OPEN does open_tables(), it calls
--echo # mysql_ha_flush(), which in turn closes the open HANDLER for t1.
--echo # RENAME TABLE gets unblocked. If it gets scheduled quickly
--echo # and manages to complete before open_tables()
--echo # of HANDLER t0 OPEN, open_tables() and therefore the whole
--echo # HANDLER t0 OPEN succeeds. Otherwise open_tables() 
--echo # notices a pending or active exclusive metadata lock on t2
--echo # and the whole HANDLER t0 OPEN fails with ER_LOCK_DEADLOCK
--echo # error.
--echo #
--error 0, ER_LOCK_DEADLOCK
handler t0 open;
--error 0, ER_UNKNOWN_TABLE
handler t0 close;
connection flush;
reap;
--error ER_UNKNOWN_TABLE
handler t1 read next;
--error ER_UNKNOWN_TABLE
handler t1 close;
connection default;
drop table t0;
connection flush;
disconnect flush;
--source include/wait_until_disconnected.inc
connection waiter;
disconnect waiter;
--source include/wait_until_disconnected.inc
connection default;

#
# Bug#31397 Inconsistent drop table behavior of handler tables.
#

create table t1 (a int);
handler t1 open as t1_alias;
drop table t1;
create table t1 (a int);
handler t1 open as t1_alias;
flush tables;
drop table t1;
create table t1 (a int);
handler t1 open as t1_alias;
handler t1_alias close;
drop table t1;
create table t1 (a int);
handler t1 open as t1_alias;
handler t1_alias read first;
drop table t1;
--error ER_UNKNOWN_TABLE
handler t1_alias read next;

# Flush tables causes handlers reopen

create table t1 (a int, b char(1), key a (a), key b (a,b));
insert into t1 values (0,"a"),(1,"b"),(2,"c"),(3,"d"),(4,"e"),
                      (5,"f"),(6,"g"),(7,"h"),(8,"i"),(9,"j");
handler t1 open;
handler t1 read a first;
handler t1 read a next;
flush tables;
handler t1 read a next;
flush tables t1;
handler t1 read a next;
flush tables with read lock;
handler t1 read a next;
unlock tables;
drop table t1;
--error ER_UNKNOWN_TABLE
handler t1 read a next;

#
# Bug#41110: crash with handler command when used concurrently with alter table
# Bug#41112: crash in mysql_ha_close_table/get_lock_data with alter table
#

connect(con1,localhost,root,,);
connect(con2,localhost,root,,);

--echo # Now test case which was reported originally but which no longer
--echo # triggers execution path which has caused the problem.
connection default;
create table t1 (a int not null);
insert into t1 values (1);
handler t1 open;
connection con1;
send alter table t1 engine=csv;
connection con2;
let $wait_condition=
  select count(*) = 1 from information_schema.processlist
  where state = "Waiting for table metadata lock" and
        info = "alter table t1 engine=csv";
--source include/wait_condition.inc
connection default;
--echo # Since S metadata lock was already acquired at HANDLER OPEN time
--echo # and TL_READ lock requested by HANDLER READ is compatible with
--echo # ALTER's TL_WRITE_ALLOW_READ the below statement should succeed
--echo # without waiting. The old version of table should be used in it.
handler t1 read next;
handler t1 close;
connection con1;
--reap # Since last in this connection was a send
drop table t1;
disconnect con1;
--source include/wait_until_disconnected.inc
connection con2;
disconnect con2;
--source include/wait_until_disconnected.inc
connection default;

#
# Bug#44151 using handler commands on information_schema tables crashes server
#
USE information_schema;
--error ER_WRONG_USAGE
HANDLER COLUMNS OPEN;
USE test;

#
# lp:697622 Assertion `! is_set()' failed when preparing a HANDLER statement
#
--error ER_UNKNOWN_TABLE
PREPARE h_r FROM 'HANDLER t1 READ `PRIMARY` LAST';

#
# MySQL Bug#16385711: HANDLER, CREATE TABLE IF NOT EXISTS, PROBLEM AFTER MYSQL_HA_FIND
#
create view v as select 1;
create temporary table v as select 2;
handler v open;
prepare stmt from 'create table if not exists v as select 3';
execute stmt;
--error ER_UNKNOWN_TABLE
handler v read next;
drop view v;

--echo #
--echo # 10.2 Test
--echo #
--echo # MDEV-20207: Assertion `! is_set()' failed in
--echo # Diagnostics_area::set_eof_status upon HANDLER READ
--echo #

DROP TABLE IF EXISTS t1;

CREATE TABLE t1 (a POINT, KEY(a));
HANDLER t1 OPEN h;

--error ER_CANT_CREATE_GEOMETRY_OBJECT
HANDLER h READ a = (0);

HANDLER h CLOSE;
DROP TABLE t1;

--echo # End of 10.2 Test

--echo #
--echo # MDEV-15813 ASAN use-after-poison in hp_hashnr upon
--echo #            HANDLER READ on a versioned HEAP table
--echo #

CREATE TABLE t1 (g GEOMETRY NOT NULL, SPATIAL gi(g));
INSERT INTO t1 VALUES (POINT(0,0));
HANDLER t1 OPEN AS h;
--error ER_KEY_DOESNT_SUPPORT
HANDLER h READ `gi`= (10);
--error ER_KEY_DOESNT_SUPPORT
HANDLER h READ `gi`> (10);
HANDLER h CLOSE;
DROP TABLE t1;

CREATE TABLE t1 (w VARCHAR(100), FULLTEXT fk(w));
INSERT INTO t1 VALUES ('one two three');
HANDLER t1 OPEN AS h;
--error ER_KEY_DOESNT_SUPPORT
HANDLER h READ `fk`= (10);
--error ER_KEY_DOESNT_SUPPORT
HANDLER h READ `fk`> (10);
HANDLER h CLOSE;
DROP TABLE t1;