path: root/mysql-test/suite/rpl/t/rpl_mdev-11092.test

--source include/have_debug.inc
--source include/have_innodb.inc
--source include/not_embedded.inc
--source include/not_windows.inc
--source include/have_binlog_format_row.inc
--source include/master-slave.inc

########################################################################################
call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
call mtr.add_suppression("Slave SQL: The incident LOST_EVENTS occurred on the master. .*");
call mtr.add_suppression("Write to binary log failed: Multi-row statements required more than .max_binlog_stmt_cache_size.* ");
call mtr.add_suppression("Write to binary log failed: Multi-statement transaction required more than .max_binlog_cache_size.* ");
call mtr.add_suppression("Incident event write to the binary log file failed");
call mtr.add_suppression("handlerton rollback failed");

let $old_max_binlog_cache_size= query_get_value(SHOW VARIABLES LIKE "max_binlog_cache_size", Value, 1);
let $old_binlog_cache_size= query_get_value(SHOW VARIABLES LIKE "binlog_cache_size", Value, 1);
let $old_max_binlog_stmt_cache_size= query_get_value(SHOW VARIABLES LIKE "max_binlog_stmt_cache_size", Value, 1);
let $old_binlog_stmt_cache_size= query_get_value(SHOW VARIABLES LIKE "binlog_stmt_cache_size", Value, 1);

--echo "*********** Annotate Event write failure **************"

SET GLOBAL max_binlog_cache_size = 4096;
SET GLOBAL binlog_cache_size = 4096;
SET GLOBAL max_binlog_stmt_cache_size = 4096;
SET GLOBAL binlog_stmt_cache_size = 4096;
disconnect master;
connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);

CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MYISAM;

let $data = `select concat('"', repeat('a',2000), '"')`;

connection master;

# Insert a huge row into MyISAM table. The row will be inserted in engine and a
# request to write to binary log will be initiated. Since row annotations are
# enabled the size of the annotate event itself will exceed the
# "max_binlog_stmt_cache_size". This will result in ER_STMT_CACHE_FULL error
# and an incident event will be written to the binary log as row update in
# engine cannot be undone.

--echo "#######################################################################"
--echo "# Test Case1: Annotate event write failure for MyISAM                 #"
--echo "#######################################################################"

--disable_query_log
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--error ER_STMT_CACHE_FULL
eval INSERT INTO t1 (a, data) VALUES (2,
       CONCAT($data, $data, $data, $data, $data, $data));
--enable_query_log

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating that the inserted data was saved on the master..
if(`SELECT COUNT(*)!=1 FROM t1`)
{
  --die The insertion should have saved on a non-transactional table
}
--echo # ..success

--connection slave
# Incident event
# 1590=ER_SLAVE_INCIDENT
--let $slave_sql_errno= 1590
--source include/wait_for_slave_sql_error_and_skip.inc

--echo # Validating that the insert was not replicated to the slave..
if(`SELECT COUNT(*) FROM t1`)
{
  --die The insertion should not have replicated to the slave
}
--echo # ..success

# MDEV-21087
# Insert two huge rows in to transaction cache. Have data such that first row
# fits inside the binary log cache. While writing the annotate event for the
# second row the binary log cache size will exceed "max_binlog_cache_size".
# Hence this statement cannot be written to binary log. As DMLs in Innodb can
# be safely rolled back only an error will be reported. Slave will continue to
# work.

--echo "#######################################################################"
--echo "# Test Case2: Annotate event write failure for INNODB                 #"
--echo "#######################################################################"

--connection master
CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=INNODB;
--disable_query_log
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
BEGIN;
eval INSERT INTO t2 (a, data) VALUES (1, CONCAT($data, $data));
--error ER_TRANS_CACHE_FULL
eval INSERT INTO t2 (a, data) VALUES (2, CONCAT($data, $data));
COMMIT;
--enable_query_log

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating binlog GTID position progressed from first insert..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") = 0`)
{
  --die Binlog GTID position should have updated
}
--echo # ..success

--echo # Validating that only the first insert into t2 saved..
if(`SELECT COUNT(*)!=1 FROM t2`)
{
  --die Only one row should exist in t2 from the first insert, the second should have rolled back
}
--echo # ..success
--source include/save_master_gtid.inc

--connection slave
--source include/sync_with_master_gtid.inc
--echo # Validating the first insert into t2 replicated to slave..
--let $diff_tables= master:test.t2,slave:test.t2
--source include/diff_tables.inc
--echo # ..success

# Testing mixed engine UPDATE statement scenario. In the following multi
# update query 'ha_update_row' will be invoked for t1 (myisam) table. This
# intern invokes binlog_write_table_map() function call. While writing a huge
# annotate event binary log cache size will exceed max_binlog_cache_size.
# Writing to binary log fails. Since non transactional changes cannot be
# rolled back incident event will be written to binary log.

--echo "#######################################################################"
--echo "# Test Case3: Annotate event write failure for mixed engine UPDATE    #"
--echo "#######################################################################"

--connection master
let $new_data = `select concat('"', repeat('b',2000), '"')`;
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--disable_query_log
--error ER_STMT_CACHE_FULL
eval UPDATE t1,t2 SET t1.data="Hello", t2.data=CONCAT($new_data,$new_data,$new_data,$new_data,$new_data);
--enable_query_log

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating non-transactional part of update saved..
if(`SELECT COUNT(*)!=1 from t1 where data="Hello"`)
{
  --die Non-transactional part of update should have saved
}
--echo # ..success

--echo # Validating transactional part of update was rolled back..
if(`SELECT COUNT(*) from t2 where data LIKE "b%"`)
{
  --die Transactional part of update should have been rolled back
}
--echo # ..success

--source include/save_master_gtid.inc

--connection slave

# Incident event
# 1590=ER_SLAVE_INCIDENT
--let $slave_sql_errno= 1590
--source include/wait_for_slave_sql_error_and_skip.inc

--echo # Validating the rolled-back multi-engine update did not replicate to slave at all..
if(`SELECT COUNT(*) from t1 where data="Hello"`)
{
  --die Non-transactional part of update should not have replicated
}
if(`SELECT COUNT(*) from t2 where data LIKE "b%"`)
{
  --die Transactional part of update should not have replicated
}
--echo # ..success

--connection master

--echo "****** Clean up *******"
--replace_result $old_max_binlog_cache_size ORIGINAL_VALUE
--eval SET GLOBAL max_binlog_cache_size= $old_max_binlog_cache_size
--replace_result $old_binlog_cache_size ORIGINAL_VALUE
--eval SET GLOBAL binlog_cache_size= $old_binlog_cache_size
--replace_result $old_max_binlog_stmt_cache_size ORIGINAL_VALUE
--eval SET GLOBAL max_binlog_stmt_cache_size= $old_max_binlog_stmt_cache_size
--replace_result $old_binlog_stmt_cache_size ORIGINAL_VALUE
--eval SET GLOBAL binlog_stmt_cache_size= $old_binlog_stmt_cache_size

DROP TABLE t1,t2;

--echo "*********** TABLE MAP Event write failure **************"

--let $debug_save= `SELECT @@GLOBAL.debug_dbug`
CREATE TABLE tm (f INT) ENGINE=MYISAM;
CREATE TABLE ti (f INT) ENGINE=INNODB;
INSERT INTO tm VALUES (10);
INSERT INTO ti VALUES (20);
--sync_slave_with_master

--echo "#######################################################################"
--echo "# Test Case4: Table_map event write failure for trans engine UPDATE   #"
--echo "#######################################################################"
--echo # Transaction should be rolled back without writing incident event
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
SET debug_dbug="+d,table_map_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=30;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating update was rolled back from storage engines..
if(`SELECT COUNT(*) FROM ti WHERE f=130`)
{
  --die Update for InnoDB table should not have saved
}
--echo # ..success

--source include/save_master_gtid.inc

--connection slave
--source include/sync_with_master_gtid.inc

--echo "#######################################################################"
--echo "# Test Case5: Table_map event write failure for mixed engine UPDATE   #"
--echo "#######################################################################"
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # In case of mixed engines if non trans table is updated write INCIDENT event
--error ER_TRANS_CACHE_FULL
UPDATE ti,tm SET tm.f=88, ti.f=120;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating that only the non-transactional update saved on master..
if(`SELECT COUNT(*)!=1 FROM tm WHERE f=88`)
{
  --die Update for MyISAM table should have saved
}
if(`SELECT COUNT(*) FROM ti WHERE f=120`)
{
  --die Update for InnoDB table should not have saved
}
--echo # ..success


--connection slave
# Incident event
# 1590=ER_SLAVE_INCIDENT
--let $slave_sql_errno= 1590
--source include/wait_for_slave_sql_error_and_skip.inc

--echo # Validating that neither of the updates replicated to slave..
if(`SELECT COUNT(*) FROM tm WHERE f=88`)
{
  --die Update for MyISAM table should not have replicated to slave
}
if(`SELECT COUNT(*) FROM ti WHERE f=120`)
{
  --die Update for InnoDB table should not have replicated to slave
}
--echo # ..success

--echo "#######################################################################"
--echo "# Test Case6: Committing a transaction consisting of two updates:
--echo "#   S1) Update transactional table
--echo "#   S2) Update transactional table
--echo "# with a table_map event write failure on the second event should
--echo "# roll-back only the second update without incident
--echo "#######################################################################"
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)

SET debug_dbug="";
BEGIN;
# successful update
UPDATE ti, tm set ti.f=40;
SET debug_dbug="+d,table_map_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=50;
COMMIT;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating binlog GTID position progressed from first update..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") = 0`)
{
  --die Binlog GTID position should have updated
}
--echo # ..success

--echo # Validating the first update saved..
if(`SELECT COUNT(*)!=1 FROM ti WHERE f=40`)
{
  --die The first update should have saved because it was transactional
}
--echo # ..and that the second update did not save..
if(`SELECT COUNT(*) FROM ti WHERE f=50`)
{
  --die The second update should have rolled back because it failed
}
--echo # ..success

--echo # Validating that only the first update replicated to slave without incident
--connection master
--source include/save_master_gtid.inc
--connection slave
--source include/sync_with_master_gtid.inc
--let $diff_tables= master:test.ti,slave:test.ti
--source include/diff_tables.inc


--echo "#######################################################################"
--echo "# Test Case7: Rolling back a transaction consisting of two updates:
--echo "#   S1) Update transactional table
--echo "#   S2) Update transactional table
--echo "# with a table_map event write failure on the second event should
--echo "# roll-back both updates without incident
--echo "#######################################################################"
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)

SET debug_dbug="";
BEGIN;
# successful update
UPDATE ti, tm set ti.f=60;
SET debug_dbug="+d,table_map_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=70;
ROLLBACK;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating that neither update saved on master..
if(`SELECT COUNT(*) FROM ti WHERE f=60`)
{
  --die The first update should not have saved
}
if(`SELECT COUNT(*) FROM ti WHERE f=70`)
{
  --die The second update should not have saved
}
--echo # ..success

--echo # Validating the transaction did not replicate to the slave
--connection master
--source include/save_master_gtid.inc

--connection slave
--source include/sync_with_master_gtid.inc
--let $diff_tables= master:test.ti,slave:test.ti
--source include/diff_tables.inc


--echo "#######################################################################"
--echo "# Test Case8: Committing a transaction consisting of two updates:
--echo "#   S1) Update transactional table
--echo "#   S2) Update mixed trans/non-trans tables
--echo "# with a table_map event write failure on the second event should
--echo "# roll-back only the second update with incident
--echo "#######################################################################"
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)

BEGIN;
# successful update
SET debug_dbug="";
UPDATE ti, tm set ti.f=80;
SET debug_dbug="+d,table_map_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=90,tm.f=99;
COMMIT;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating binlog GTID position progressed from first update..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") = 0`)
{
  --die Binlog GTID position should have updated
}
--echo # ..success

--echo # Validating the first update saved..
if(`SELECT COUNT(*)!=1 FROM ti WHERE f=80`)
{
  --die The first update should have saved because it was transactional
}
--echo # ..and the transactional part of the second update did not save..
if(`SELECT COUNT(*) FROM ti WHERE f=90`)
{
  --die The transactional part of the second update should have rolled back because it failed
}
--echo # ..whereas the non-trans part of the second update did save..
if(`SELECT COUNT(*)!=1 FROM tm WHERE f=99`)
{
  --die The non-trans part from the second update should have saved
}
--echo # ..success

--echo # Validating that the incident propagated to the slave
--connection slave
# Incident event
# 1590=ER_SLAVE_INCIDENT
--let $slave_sql_errno= 1590
--source include/wait_for_slave_sql_error_and_skip.inc

--echo # Validating that the first update replicated to the slave..
if(`SELECT COUNT(*)!=1 FROM ti WHERE f=80`)
{
  --die The first update should have replicated because it was transactional
}
--echo # ..and neither part of the second update replicated..
if(`SELECT COUNT(*) FROM ti WHERE f=90`)
{
  --die The trans part from the second update should not have replicated because it was rolled back
}
if(`SELECT COUNT(*) FROM tm WHERE f=99`)
{
  --die The non-trans part from the second update should not have replicated because it was not binlogged
}
--echo # ..success


--echo "#######################################################################"
--echo "# Test Case9: Rolling back a transaction consisting of two updates:
--echo "#   S1) Update transactional table
--echo "#   S2) Update mixed trans/non-trans tables
--echo "# with a table_map event write failure on the second event should
--echo "# roll-back both transactional updates, preserve the non-transactional
--echo "# update on the master (only), and write an incident event
--echo "#######################################################################"
--connection master
--let $old_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)

SET debug_dbug="";
BEGIN;
# successful update
UPDATE ti, tm set ti.f=100;
SET debug_dbug="+d,table_map_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=110,tm.f=111;
ROLLBACK;

--let $new_gtid_binlog_pos= query_get_value(SHOW VARIABLES LIKE 'gtid_binlog_pos', Value, 1)
--echo # Validating update was not binlogged..
if(`SELECT strcmp("$old_gtid_binlog_pos","$new_gtid_binlog_pos") != 0`)
{
  --die Binlog GTID position should have been unchanged after failed update
}
--echo # ..success

--echo # Validating trans updates rollback, but the non-trans update stays..
if(`SELECT COUNT(*) FROM ti WHERE f=100`)
{
  --die The first update should not have saved
}
if(`SELECT COUNT(*) FROM ti WHERE f=110`)
{
  --die The transactional part of the second update should not have saved
}
if(`SELECT COUNT(*)!=1 FROM tm WHERE f=111`)
{
  --die The non-trans part of the second update should have saved
}
--echo # ..success

--echo # Validating that the incident propagated to the slave
--connection slave
# Incident event
# 1590=ER_SLAVE_INCIDENT
--let $slave_sql_errno= 1590
--source include/wait_for_slave_sql_error_and_skip.inc

--echo # Validating that none of the updates replicated to the slave
--let $diff_tables= master:test.ti,slave:test.ti
--source include/diff_tables.inc
if(`SELECT COUNT(*) FROM tm WHERE f=111`)
{
  --die The non-trans part from the second update should not have replicated because it was not binlogged
}
--echo # ..success


--echo "#######################################################################"
--echo "# Test Case10: If an incident event fails to write, a specific error
--echo "# should be logged
--echo "#
--echo "# Note: This test case is the same as test case 5, with the caveat of
--echo "# the incident event failing to write.
--echo "#######################################################################"

--connection master
SET debug_dbug="d,table_map_write_error,incident_event_write_error";
--error ER_TRANS_CACHE_FULL
UPDATE ti, tm set ti.f=120, tm.f=122;

--echo # Validate error message indicating incident event failed to write
let $log_error_= `SELECT @@GLOBAL.log_error`;
if(!$log_error_)
{
    # MySQL Server on windows is started with --console and thus
    # does not know the location of its .err log, use default location
    let $log_error_ = $MYSQLTEST_VARDIR/log/mysqld.1.err;
}
--let SEARCH_PATTERN= Incident event write to the binary log file failed
--let SEARCH_FILE= $log_error_
--source include/search_pattern_in_file.inc


--connection master
--echo "******** Clean Up **********"
--eval SET GLOBAL debug_dbug = '$debug_save'
DROP TABLE tm,ti;

--source include/rpl_end.inc