Adding upstream version 2.1.8~rc1.upstream/2.1.8_rc1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 52 insertions, 33 deletions

diff --git a/agents/ocf/HealthCPU.in b/agents/ocf/HealthCPU.in
index 14e4b07..1a691a9 100755
--- a/agents/ocf/HealthCPU.in
+++ b/agents/ocf/HealthCPU.in
@@ -26,6 +26,7 @@
 : ${OCF_FUNCTIONS:="${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs"}
 . "${OCF_FUNCTIONS}"
 : ${__OCF_ACTION:="$1"}
+: ${OCF_RESKEY_dampening:="30s"}
 
 #######################################################################
 
@@ -196,9 +197,6 @@ fi
 if [ -z "${OCF_RESKEY_yellow_limit}" ] ; then
     OCF_RESKEY_yellow_limit=50
 fi
-if [ -z "${OCF_RESKEY_dampening}" ]; then
-    OCF_RESKEY_dampening="30s"
-fi
 
 case "$__OCF_ACTION" in
 meta-data)      meta_data
diff --git a/agents/ocf/HealthIOWait.in b/agents/ocf/HealthIOWait.in
index ba7a17a..65ce901 100755
--- a/agents/ocf/HealthIOWait.in
+++ b/agents/ocf/HealthIOWait.in
@@ -19,6 +19,7 @@
 : ${OCF_FUNCTIONS:="${OCF_ROOT}/resource.d/heartbeat/.ocf-shellfuncs"}
 . "${OCF_FUNCTIONS}"
 : ${__OCF_ACTION:="$1"}
+: ${OCF_RESKEY_dampening:="5s"}
 
 #######################################################################
 
@@ -60,12 +61,22 @@ the #health-iowait will go red if the %iowait of the CPU get higher than 15%.
 <content type="integer" default="15"/>
 </parameter>
 
+<parameter name="dampening" reloadable="1">
+<longdesc lang="en">
+The time to wait (dampening) in seconds for further changes before writing
+</longdesc>
+<shortdesc lang="en">The time to wait (dampening) in seconds for further changes 
+before writing</shortdesc>
+<content type="string" default="5s"/>
+</parameter>
+
 </parameters>
 
 <actions>
 <action name="start"        timeout="10s" />
 <action name="stop"         timeout="10s" />
 <action name="monitor"      timeout="10s" interval="10s" start-delay="0s" />
+<action name="reload-agent" timeout="20s" />
 <action name="meta-data"    timeout="5s" />
 <action name="validate-all" timeout="10s" depth="0" />
 </actions>
@@ -77,7 +88,7 @@ END
 
 agent_usage() {
         cat <<END
-usage: $0 {start|stop|monitor|validate-all|meta-data}
+usage: $0 {start|stop|monitor|reload-agent|validate-all|meta-data}
 
 Expects to have a fully populated OCF RA-compliant environment set.
 END
@@ -109,22 +120,26 @@ agent_monitor() {
           # echo $OCF_RESKEY_yellow_limit
           if [ $WAIT -gt ${OCF_RESKEY_red_limit} ] ; then
             # echo "System state RED!"
-            attrd_updater -n "#health-iowait" -U "red" -d "5s"
+            attrd_updater -n "#health-iowait" -B "red" -d "${OCF_RESKEY_dampening}"
             return $OCF_SUCCESS
           fi
 
           if [ $WAIT -gt ${OCF_RESKEY_yellow_limit} ] ; then
             # echo "System state yellow."
-            attrd_updater -n "#health-iowait" -U "yellow" -d "5s"
+            attrd_updater -n "#health-iowait" -B "yellow" -d "${OCF_RESKEY_dampening}"
           else
             # echo "System state green."
-            attrd_updater -n "#health-iowait" -U "green" -d "5s"
+            attrd_updater -n "#health-iowait" -B "green" -d "${OCF_RESKEY_dampening}"
           fi
           return $OCF_SUCCESS
         fi
         return $OCF_NOT_RUNNING
 }
 
+agent_reload_agent() {
+    return $OCF_SUCCESS
+}
+
 is_integer() {
     case "$1" in
         ""|*[0-9]*) return 0 ;;
@@ -181,7 +196,8 @@ meta-data)      meta_data
                 ;;
 start)          agent_start;;
 stop)           agent_stop;;
-monitor)        agent_monitor;;
+monitor)        agent_validate && agent_monitor;;
+reload-agent)   agent_reload_agent;;
 validate-all)   agent_validate;;
 usage|help)     agent_usage
                 exit $OCF_SUCCESS
diff --git a/agents/ocf/HealthSMART.in b/agents/ocf/HealthSMART.in
index b2f37de..f688f73 100755
--- a/agents/ocf/HealthSMART.in
+++ b/agents/ocf/HealthSMART.in
@@ -80,7 +80,7 @@ The device type(s) to assume for the drive(s) being tested as a SPACE separated
 
 <parameter name="temp_lower_limit" reloadable="1">
 <longdesc lang="en">
-Lower limit of the temperature in deg C of the drive(s). Below this limit the status will be red.
+Lower limit of the temperature in deg C of the drive(s). Below this limit the status of #health-smart will be red.
 </longdesc>
 <shortdesc lang="en">Lower limit for the red smart attribute</shortdesc>
 <content type="string" default="0"/>
@@ -116,7 +116,7 @@ The path to the smartctl program, used for querying device health.
 The time to wait (dampening) for further changes to occur
 </longdesc>
 <shortdesc lang="en">Dampening interval</shortdesc>
-<content type="integer" default="5s"/>
+<content type="string" default="5s"/>
 </parameter>
 
 </parameters>
@@ -137,28 +137,30 @@ END
 
 check_temperature() {
 
-    if [ $1 -lt ${lower_red_limit} ] ; then
-        ocf_log info "Drive ${DRIVE} ${DEVICE} too cold: ${1} C"
-        attrd_updater -n "#health-smart" -B "red" -d "${OCF_RESKEY_dampen}"
-        return 1
-    fi
+    if [ -n "$1" ]; then
+        if [ $1 -lt ${lower_red_limit} ] ; then
+            ocf_log info "Drive ${DRIVE} ${DEVICE} too cold: ${1} C"
+            attrd_updater -n "#health-smart" -B "red" -d "${OCF_RESKEY_dampen}"
+            return 1
+        fi
 
-    if [ $1 -gt ${upper_red_limit} ] ; then
-        ocf_log info "Drive ${DRIVE} ${DEVICE} too hot: ${1} C"
-        attrd_updater -n "#health-smart" -B "red" -d "${OCF_RESKEY_dampen}"
-        return 1
-    fi
+        if [ $1 -gt ${upper_red_limit} ] ; then
+            ocf_log info "Drive ${DRIVE} ${DEVICE} too hot: ${1} C"
+            attrd_updater -n "#health-smart" -B "red" -d "${OCF_RESKEY_dampen}"
+            return 1
+        fi
 
-    if [ $1 -lt ${lower_yellow_limit} ] ; then
-        ocf_log info "Drive ${DRIVE} ${DEVICE} quite cold: ${1} C"
-        attrd_updater -n "#health-smart" -B "yellow" -d "${OCF_RESKEY_dampen}"
-        return 1
-    fi
+        if [ $1 -lt ${lower_yellow_limit} ] ; then
+            ocf_log info "Drive ${DRIVE} ${DEVICE} quite cold: ${1} C"
+            attrd_updater -n "#health-smart" -B "yellow" -d "${OCF_RESKEY_dampen}"
+            return 1
+        fi
 
-    if [ $1 -gt ${upper_yellow_limit} ] ; then
-        ocf_log info "Drive ${DRIVE} ${DEVICE} quite hot: ${1} C"
-        attrd_updater -n "#health-smart" -B "yellow" -d "${OCF_RESKEY_dampen}"
-        return 1
+        if [ $1 -gt ${upper_yellow_limit} ] ; then
+            ocf_log info "Drive ${DRIVE} ${DEVICE} quite hot: ${1} C"
+            attrd_updater -n "#health-smart" -B "yellow" -d "${OCF_RESKEY_dampen}"
+            return 1
+        fi
     fi
 }
 
@@ -350,7 +352,7 @@ fi
 case "$__OCF_ACTION" in
     start)        HealthSMART_start;;
     stop)         HealthSMART_stop;;
-    monitor)      HealthSMART_monitor;;
+    monitor)      HealthSMART_validate && HealthSMART_monitor;;
     validate-all) HealthSMART_validate;;
     reload-agent) HealthSMART_reload_agent;;
     meta-data)
diff --git a/agents/ocf/SysInfo.in b/agents/ocf/SysInfo.in
index 5c2c7c7..d3a18f9 100755
--- a/agents/ocf/SysInfo.in
+++ b/agents/ocf/SysInfo.in
@@ -160,9 +160,11 @@ UpdateStat() {
     value="$*"
     printf "%s:\t%s\n" "$name" "$value"
     if [ "$__OCF_ACTION" = "start" ] ; then
-        "${HA_SBIN_DIR}/attrd_updater" ${OCF_RESKEY_delay} -S status -n $name -B "$value"
+        "${HA_SBIN_DIR}/attrd_updater" -d ${OCF_RESKEY_delay} -S status \
+            -n $name -B "$value"
     else
-        "${HA_SBIN_DIR}/attrd_updater" ${OCF_RESKEY_delay} -S status -n $name -v "$value"
+        "${HA_SBIN_DIR}/attrd_updater" -d ${OCF_RESKEY_delay} -S status \
+            -n $name -v "$value"
     fi
 }
 
diff --git a/agents/ocf/o2cb.in b/agents/ocf/o2cb.in
index f85d2f4..6db9d2b 100755
--- a/agents/ocf/o2cb.in
+++ b/agents/ocf/o2cb.in
@@ -366,7 +366,8 @@ meta_data() {
 <resource-agent name="o2cb" version="@VERSION@">
   <version>1.0</version>
   <longdesc lang="en">
-This Resource Agent controls the userspace daemon needed by OCFS2.
+This Resource Agent controls the userspace daemon needed by OCFS2.  This agent
+is deprecated and will be removed in Pacemaker 3.0.0.
   </longdesc>
   <shortdesc lang="en">OCFS2 daemon resource agent</shortdesc>
   <parameters>