diff options
Diffstat (limited to 'conf/transport')
| -rw-r--r-- | conf/transport | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/conf/transport b/conf/transport new file mode 100644 index 0000000..bad7739 --- /dev/null +++ b/conf/transport @@ -0,0 +1,317 @@ +# TRANSPORT(5) TRANSPORT(5) +# +# NAME +# transport - Postfix transport table format +# +# SYNOPSIS +# postmap /etc/postfix/transport +# +# postmap -q "string" /etc/postfix/transport +# +# postmap -q - /etc/postfix/transport <inputfile +# +# DESCRIPTION +# The optional transport(5) table specifies a mapping from +# email addresses to message delivery transports and +# next-hop destinations. Message delivery transports such +# as local or smtp are defined in the master.cf file, and +# next-hop destinations are typically hosts or domain names. +# The table is searched by the trivial-rewrite(8) daemon. +# +# This mapping overrides the default transport:nexthop +# selection that is built into Postfix: +# +# local_transport (default: local:$myhostname) +# This is the default for final delivery to domains +# listed with mydestination, and for [ipaddress] des- +# tinations that match $inet_interfaces or +# $proxy_interfaces. The default nexthop destination +# is the MTA hostname. +# +# virtual_transport (default: virtual:) +# This is the default for final delivery to domains +# listed with virtual_mailbox_domains. The default +# nexthop destination is the recipient domain. +# +# relay_transport (default: relay:) +# This is the default for remote delivery to domains +# listed with relay_domains. In order of decreasing +# precedence, the nexthop destination is taken from +# relay_transport, sender_dependent_relayhost_maps, +# relayhost, or from the recipient domain. +# +# default_transport (default: smtp:) +# This is the default for remote delivery to other +# destinations. In order of decreasing precedence, +# the nexthop destination is taken from sender_depen- +# dent_default_transport_maps, default_transport, +# sender_dependent_relayhost_maps, relayhost, or from +# the recipient domain. +# +# Normally, the transport(5) table is specified as a text +# file that serves as input to the postmap(1) command. The +# result, an indexed file in dbm or db format, is used for +# fast searching by the mail system. Execute the command +# "postmap /etc/postfix/transport" to rebuild an indexed +# file after changing the corresponding transport table. +# +# When the table is provided via other means such as NIS, +# LDAP or SQL, the same lookups are done as for ordinary +# indexed files. +# +# Alternatively, the table can be provided as a regu- +# lar-expression map where patterns are given as regular +# expressions, or lookups can be directed to a TCP-based +# server. In those case, the lookups are done in a slightly +# different way as described below under "REGULAR EXPRESSION +# TABLES" or "TCP-BASED TABLES". +# +# CASE FOLDING +# The search string is folded to lowercase before database +# lookup. As of Postfix 2.3, the search string is not case +# folded with database types such as regexp: or pcre: whose +# lookup fields can match both upper and lower case. +# +# TABLE FORMAT +# The input format for the postmap(1) command is as follows: +# +# pattern result +# When pattern matches the recipient address or +# domain, use the corresponding result. +# +# blank lines and comments +# Empty lines and whitespace-only lines are ignored, +# as are lines whose first non-whitespace character +# is a `#'. +# +# multi-line text +# A logical line starts with non-whitespace text. A +# line that starts with whitespace continues a logi- +# cal line. +# +# The pattern specifies an email address, a domain name, or +# a domain name hierarchy, as described in section "TABLE +# SEARCH ORDER". +# +# The result is of the form transport:nexthop and specifies +# how or where to deliver mail. This is described in section +# "RESULT FORMAT". +# +# TABLE SEARCH ORDER +# With lookups from indexed files such as DB or DBM, or from +# networked tables such as NIS, LDAP or SQL, patterns are +# tried in the order as listed below: +# +# user+extension@domain transport:nexthop +# Deliver mail for user+extension@domain through +# transport to nexthop. +# +# user@domain transport:nexthop +# Deliver mail for user@domain through transport to +# nexthop. +# +# domain transport:nexthop +# Deliver mail for domain through transport to nex- +# thop. +# +# .domain transport:nexthop +# Deliver mail for any subdomain of domain through +# transport to nexthop. This applies only when the +# string transport_maps is not listed in the par- +# ent_domain_matches_subdomains configuration set- +# ting. Otherwise, a domain name matches itself and +# its subdomains. +# +# * transport:nexthop +# The special pattern * represents any address (i.e. +# it functions as the wild-card pattern, and is +# unique to Postfix transport tables). +# +# Note 1: the null recipient address is looked up as +# $empty_address_recipient@$myhostname (default: mailer-dae- +# mon@hostname). +# +# Note 2: user@domain or user+extension@domain lookup is +# available in Postfix 2.0 and later. +# +# RESULT FORMAT +# The lookup result is of the form transport:nexthop. The +# transport field specifies a mail delivery transport such +# as smtp or local. The nexthop field specifies where and +# how to deliver mail. +# +# The transport field specifies the name of a mail delivery +# transport (the first name of a mail delivery service entry +# in the Postfix master.cf file). +# +# The nexthop field usually specifies one recipient domain +# or hostname. In the case of the Postfix SMTP/LMTP client, +# the nexthop field may contain a list of nexthop destina- +# tions separated by comma or whitespace (Postfix 3.5 and +# later). +# +# The syntax of a nexthop destination is transport depen- +# dent. With SMTP, specify a service on a non-default port +# as host:service, and disable MX (mail exchanger) DNS +# lookups with [host] or [host]:port. The [] form is +# required when you specify an IP address instead of a host- +# name. +# +# A null transport and null nexthop field means "do not +# change": use the delivery transport and nexthop informa- +# tion that would be used when the entire transport table +# did not exist. +# +# A non-null transport field with a null nexthop field +# resets the nexthop information to the recipient domain. +# +# A null transport field with non-null nexthop field does +# not modify the transport information. +# +# EXAMPLES +# In order to deliver internal mail directly, while using a +# mail relay for all other mail, specify a null entry for +# internal destinations (do not change the delivery trans- +# port or the nexthop information) and specify a wildcard +# for all other destinations. +# +# my.domain : +# .my.domain : +# * smtp:outbound-relay.my.domain +# +# In order to send mail for example.com and its subdomains +# via the uucp transport to the UUCP host named example: +# +# example.com uucp:example +# .example.com uucp:example +# +# When no nexthop host name is specified, the destination +# domain name is used instead. For example, the following +# directs mail for user@example.com via the slow transport +# to a mail exchanger for example.com. The slow transport +# could be configured to run at most one delivery process at +# a time: +# +# example.com slow: +# +# When no transport is specified, Postfix uses the transport +# that matches the address domain class (see DESCRIPTION +# above). The following sends all mail for example.com and +# its subdomains to host gateway.example.com: +# +# example.com :[gateway.example.com] +# .example.com :[gateway.example.com] +# +# In the above example, the [] suppress MX lookups. This +# prevents mail routing loops when your machine is primary +# MX host for example.com. +# +# In the case of delivery via SMTP or LMTP, one may specify +# host:service instead of just a host: +# +# example.com smtp:bar.example:2025 +# +# This directs mail for user@example.com to host bar.example +# port 2025. Instead of a numerical port a symbolic name may +# be used. Specify [] around the hostname if MX lookups must +# be disabled. +# +# Deliveries via SMTP or LMTP support multiple destinations +# (Postfix >= 3.5): +# +# example.com smtp:bar.example, foo.example +# +# This tries to deliver to bar.example before trying to +# deliver to foo.example. +# +# The error mailer can be used to bounce mail: +# +# .example.com error:mail for *.example.com is not deliverable +# +# This causes all mail for user@anything.example.com to be +# bounced. +# +# REGULAR EXPRESSION TABLES +# This section describes how the table lookups change when +# the table is given in the form of regular expressions. For +# a description of regular expression lookup table syntax, +# see regexp_table(5) or pcre_table(5). +# +# Each pattern is a regular expression that is applied to +# the entire address being looked up. Thus, +# some.domain.hierarchy is not looked up via its parent +# domains, nor is user+foo@domain looked up as user@domain. +# +# Patterns are applied in the order as specified in the ta- +# ble, until a pattern is found that matches the search +# string. +# +# The trivial-rewrite(8) server disallows regular expression +# substitution of $1 etc. in regular expression lookup +# tables, because that could open a security hole (Postfix +# version 2.3 and later). +# +# TCP-BASED TABLES +# This section describes how the table lookups change when +# lookups are directed to a TCP-based server. For a descrip- +# tion of the TCP client/server lookup protocol, see tcp_ta- +# ble(5). This feature is not available up to and including +# Postfix version 2.4. +# +# Each lookup operation uses the entire recipient address +# once. Thus, some.domain.hierarchy is not looked up via +# its parent domains, nor is user+foo@domain looked up as +# user@domain. +# +# Results are the same as with indexed file lookups. +# +# CONFIGURATION PARAMETERS +# The following main.cf parameters are especially relevant. +# The text below provides only a parameter summary. See +# postconf(5) for more details including examples. +# +# empty_address_recipient (MAILER-DAEMON) +# The recipient of mail addressed to the null +# address. +# +# parent_domain_matches_subdomains (see 'postconf -d' out- +# put) +# A list of Postfix features where the pattern "exam- +# ple.com" also matches subdomains of example.com, +# instead of requiring an explicit ".example.com" +# pattern. +# +# transport_maps (empty) +# Optional lookup tables with mappings from recipient +# address to (message delivery transport, next-hop +# destination). +# +# SEE ALSO +# trivial-rewrite(8), rewrite and resolve addresses +# master(5), master.cf file format +# postconf(5), configuration parameters +# postmap(1), Postfix lookup table manager +# +# README FILES +# Use "postconf readme_directory" or "postconf html_direc- +# tory" to locate this information. +# ADDRESS_REWRITING_README, address rewriting guide +# DATABASE_README, Postfix lookup table overview +# FILTER_README, external content filter +# +# LICENSE +# The Secure Mailer license must be distributed with this +# software. +# +# AUTHOR(S) +# Wietse Venema +# IBM T.J. Watson Research +# P.O. Box 704 +# Yorktown Heights, NY 10598, USA +# +# Wietse Venema +# Google, Inc. +# 111 8th Avenue +# New York, NY 10011, USA +# +# TRANSPORT(5) |