Merging upstream version 1:4.14.0.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

23 files changed, 248 insertions, 98 deletions

diff --git a/heartbeat/Delay b/heartbeat/Delay
index 5aa8f46..c96da0e 100755
--- a/heartbeat/Delay
+++ b/heartbeat/Delay
@@ -4,22 +4,9 @@
 # Support:      users@clusterlabs.org
 # License:      GNU General Public License (GPL)
 #
-#	This script is a test resource for introducing delay.
+#	This script is a resource for introducing a delay.
 #
-#	usage: $0  {start|stop|status|monitor|meta-data}
-#
-#	  OCF parameters are as below:
-#		OCF_RESKEY_startdelay
-#		OCF_RESKEY_stopdelay
-#		OCF_RESKEY_mondelay
-#
-#	
-#		OCF_RESKEY_startdelay defaults to 20 (seconds)
-#		OCF_RESKEY_stopdelay defaults to $OCF_RESKEY_startdelay
-#		OCF_RESKEY_mondelay defaults to $OCF_RESKEY_startdelay
-#
-#
-#	This is really a test resource script.
+#	usage: $0 {start|stop|status|monitor|meta-data}
 #
 
 #######################################################################
@@ -54,7 +41,7 @@ meta_data() {
 <version>1.0</version>
 
 <longdesc lang="en">
-This script is a test resource for introducing delay.
+This script is a resource for introducing a delay.
 </longdesc>
 <shortdesc lang="en">Waits for a defined timespan</shortdesc>
 
diff --git a/heartbeat/Filesystem b/heartbeat/Filesystem
index 0665628..e1378f7 100755
--- a/heartbeat/Filesystem
+++ b/heartbeat/Filesystem
@@ -704,7 +704,7 @@ timeout_child() {
 	wait $pid
 	ret=$?
 
-	# ret would be 127 + child exit code if the timeout expired
+	# ret would be 127 + child exit code if the timeout expired (see "man wait" for more info)
 	[ $ret -lt 128 ] && kill -s KILL $killer
 	return $ret
 }
diff --git a/heartbeat/IPaddr2 b/heartbeat/IPaddr2
index 97a7431..5f30b8f 100755
--- a/heartbeat/IPaddr2
+++ b/heartbeat/IPaddr2
@@ -624,7 +624,7 @@ find_interface() {
 	# List interfaces but exclude FreeS/WAN ipsecN virtual interfaces
 	#
 	local iface="`$IP2UTIL -o -f $FAMILY addr show \
-		| grep "\ $ipaddr/$netmask" \
+		| grep " $ipaddr/$netmask" \
 		| cut -d ' ' -f2 \
 		| grep -v '^ipsec[0-9][0-9]*$'`"
 
diff --git a/heartbeat/LVM-activate b/heartbeat/LVM-activate
index f6f24a3..3858ed8 100755
--- a/heartbeat/LVM-activate
+++ b/heartbeat/LVM-activate
@@ -448,6 +448,10 @@ systemid_check()
 {
 	# system_id_source is set in lvm.conf
 	source=$(lvmconfig 'global/system_id_source' 2>/dev/null | cut -d"=" -f2)
+
+	# Is volume_list set in lvm.conf
+	vol_list=$(lvmconfig 'activation/volume_list' 2>/dev/null | cut -d"=" -f2)
+
 	if [ "$source" = "" ] || [ "$source" = "none" ]; then
 		ocf_exit_reason "system_id_source in lvm.conf is not set correctly!"
 		exit $OCF_ERR_ARGS
@@ -458,6 +462,11 @@ systemid_check()
 		exit $OCF_ERR_ARGS
 	fi
 
+	if [ -n "$source" ] && [ -n "$vol_list" ]; then
+		ocf_exit_reason "Both system_id_source & volume_list cannot be defined!"
+		exit $OCF_ERR_ARGS
+	fi
+
 	return $OCF_SUCCESS
 }
 
diff --git a/heartbeat/SysInfo.in b/heartbeat/SysInfo.in
index c57b7b6..8a268d7 100644
--- a/heartbeat/SysInfo.in
+++ b/heartbeat/SysInfo.in
@@ -119,7 +119,7 @@ UpdateStat() {
     name=$1; shift
     value="$*"
     echo -e "$name:\t$value"
-    ${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n $name -v "$value"
+    ${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -n $name -v "$value"
 }
 
 SysInfoStats() {
diff --git a/heartbeat/aws-vpc-move-ip b/heartbeat/aws-vpc-move-ip
index dee0403..54806f6 100755
--- a/heartbeat/aws-vpc-move-ip
+++ b/heartbeat/aws-vpc-move-ip
@@ -36,6 +36,7 @@
 
 # Defaults
 OCF_RESKEY_awscli_default="/usr/bin/aws"
+OCF_RESKEY_auth_type_default="key"
 OCF_RESKEY_profile_default="default"
 OCF_RESKEY_region_default=""
 OCF_RESKEY_ip_default=""
@@ -48,6 +49,7 @@ OCF_RESKEY_monapi_default="false"
 OCF_RESKEY_lookup_type_default="InstanceId"
 
 : ${OCF_RESKEY_awscli=${OCF_RESKEY_awscli_default}}
+: ${OCF_RESKEY_auth_type=${OCF_RESKEY_auth_type_default}}
 : ${OCF_RESKEY_profile=${OCF_RESKEY_profile_default}}
 : ${OCF_RESKEY_region=${OCF_RESKEY_region_default}}
 : ${OCF_RESKEY_ip=${OCF_RESKEY_ip_default}}
@@ -58,8 +60,6 @@ OCF_RESKEY_lookup_type_default="InstanceId"
 : ${OCF_RESKEY_iflabel=${OCF_RESKEY_iflabel_default}}
 : ${OCF_RESKEY_monapi=${OCF_RESKEY_monapi_default}}
 : ${OCF_RESKEY_lookup_type=${OCF_RESKEY_lookup_type_default}}
-
-[ -n "$OCF_RESKEY_region" ] && region_opt="--region $OCF_RESKEY_region"
 #######################################################################
 
 
@@ -83,6 +83,10 @@ cat <<END
 <longdesc lang="en">
 Resource Agent to move IP addresses within a VPC of the Amazon Webservices EC2
 by changing an entry in an specific routing table
+
+Credentials needs to be setup by running "aws configure", or by using AWS Policies.
+
+See https://aws.amazon.com/cli/ for more information about awscli.
 </longdesc>
 <shortdesc lang="en">Move IP within a VPC of the AWS EC2</shortdesc>
 
@@ -95,6 +99,15 @@ Path to command line tools for AWS
 <content type="string" default="${OCF_RESKEY_awscli_default}" />
 </parameter>
 
+<parameter name="auth_type">
+<longdesc lang="en">
+Authentication type "key" for AccessKey and SecretAccessKey set via "aws configure",
+or "role" to use AWS Policies.
+</longdesc>
+<shortdesc lang="en">Authentication type</shortdesc>
+<content type="string" default="${OCF_RESKEY_auth_type_default}" />
+</parameter>
+
 <parameter name="profile">
 <longdesc lang="en">
 Valid AWS CLI profile name (see ~/.aws/config and 'aws configure')
@@ -198,7 +211,7 @@ END
 execute_cmd_as_role(){
 	cmd=$1
 	role=$2
-	output="$($OCF_RESKEY_awscli sts assume-role --role-arn $role --role-session-name AWSCLI-RouteTableUpdate --profile $OCF_RESKEY_profile $region_opt --output=text)"
+	output="$($AWSCLI_CMD sts assume-role --role-arn $role --role-session-name AWSCLI-RouteTableUpdate --output=text)"
 	export AWS_ACCESS_KEY_ID="$(echo $output | awk -F" " '$4=="CREDENTIALS" {print $5}')"
 	export AWS_SECRET_ACCESS_KEY="$(echo $output | awk -F" " '$4=="CREDENTIALS" {print $7}')"
 	export AWS_SESSION_TOKEN="$(echo $output | awk -F" " '$4=="CREDENTIALS" {print $8}')"
@@ -220,11 +233,11 @@ ec2ip_set_address_param_compat(){
 }
 
 ec2ip_validate() {
-	for cmd in $OCF_RESKEY_awscli ip curl; do
+	for cmd in "$OCF_RESKEY_awscli" ip curl; do
 		check_binary "$cmd"
 	done
 
-	if [ -z "$OCF_RESKEY_profile" ]; then
+	if [ "x${OCF_RESKEY_auth_type}" = "xkey" ] && [ -z "$OCF_RESKEY_profile" ]; then
 		ocf_exit_reason "profile parameter not set"
 		return $OCF_ERR_CONFIGURED
 	fi
@@ -262,7 +275,7 @@ ec2ip_monitor() {
 		for rtb in $(echo $OCF_RESKEY_routing_table | sed -e 's/,/ /g'); do
 			ocf_log info "monitor: check routing table (API call) - $rtb"
 			if [ -z "${OCF_RESKEY_routing_table_role}" ]; then
-				cmd="$OCF_RESKEY_awscli --profile $OCF_RESKEY_profile $region_opt --output text ec2 describe-route-tables --route-table-ids $rtb --query RouteTables[*].Routes[?DestinationCidrBlock=='$OCF_RESKEY_ip/32'].$OCF_RESKEY_lookup_type"
+				cmd="$AWSCLI_CMD --output text ec2 describe-route-tables --route-table-ids $rtb --query RouteTables[*].Routes[?DestinationCidrBlock=='$OCF_RESKEY_ip/32'].$OCF_RESKEY_lookup_type"
 				ocf_log debug "executing command: $cmd"
 				ROUTE_TO_INSTANCE="$($cmd)"
 			else
@@ -368,7 +381,7 @@ ec2ip_get_and_configure() {
 	EC2_NETWORK_INTERFACE_ID="$(ec2ip_get_instance_eni)"
 	for rtb in $(echo $OCF_RESKEY_routing_table | sed -e 's/,/ /g'); do
 		if [ -z "${OCF_RESKEY_routing_table_role}" ]; then
-			cmd="$OCF_RESKEY_awscli --profile $OCF_RESKEY_profile $region_opt --output text ec2 replace-route --route-table-id $rtb --destination-cidr-block ${OCF_RESKEY_ip}/32 --network-interface-id $EC2_NETWORK_INTERFACE_ID"
+			cmd="$AWSCLI_CMD --output text ec2 replace-route --route-table-id $rtb --destination-cidr-block ${OCF_RESKEY_ip}/32 --network-interface-id $EC2_NETWORK_INTERFACE_ID"
 			ocf_log debug "executing command: $cmd"
 			$cmd
 		else
@@ -475,6 +488,22 @@ if ! ocf_is_root; then
 	exit $OCF_ERR_PERM
 fi
 
+AWSCLI_CMD="${OCF_RESKEY_awscli}"
+if [ "x${OCF_RESKEY_auth_type}" = "xkey" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --profile ${OCF_RESKEY_profile}"
+elif [ "x${OCF_RESKEY_auth_type}" = "xrole" ]; then
+	if [ -z "${OCF_RESKEY_region}" ]; then
+		ocf_exit_reason "region needs to be set when using role-based authentication"
+		exit $OCF_ERR_CONFIGURED
+	fi
+else
+	ocf_exit_reason "Incorrect auth_type: ${OCF_RESKEY_auth_type}"
+	exit $OCF_ERR_CONFIGURED
+fi
+if [ -n "${OCF_RESKEY_region}" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --region ${OCF_RESKEY_region}"
+fi
+
 ec2ip_set_address_param_compat
 
 ec2ip_validate
diff --git a/heartbeat/aws-vpc-route53.in b/heartbeat/aws-vpc-route53.in
index 22cbb35..18ab157 100644
--- a/heartbeat/aws-vpc-route53.in
+++ b/heartbeat/aws-vpc-route53.in
@@ -46,24 +46,22 @@
 
 # Defaults
 OCF_RESKEY_awscli_default="/usr/bin/aws"
+OCF_RESKEY_auth_type_default="key"
 OCF_RESKEY_profile_default="default"
+OCF_RESKEY_region_default=""
 OCF_RESKEY_hostedzoneid_default=""
 OCF_RESKEY_fullname_default=""
 OCF_RESKEY_ip_default="local"
 OCF_RESKEY_ttl_default=10
 
 : ${OCF_RESKEY_awscli=${OCF_RESKEY_awscli_default}}
+: ${OCF_RESKEY_auth_type=${OCF_RESKEY_auth_type_default}}
 : ${OCF_RESKEY_profile=${OCF_RESKEY_profile_default}}
+: ${OCF_RESKEY_region=${OCF_RESKEY_region_default}}
 : ${OCF_RESKEY_hostedzoneid:=${OCF_RESKEY_hostedzoneid_default}}
 : ${OCF_RESKEY_fullname:=${OCF_RESKEY_fullname_default}}
 : ${OCF_RESKEY_ip:=${OCF_RESKEY_ip_default}}
 : ${OCF_RESKEY_ttl:=${OCF_RESKEY_ttl_default}}
-#######################################################################
-
-
-AWS_PROFILE_OPT="--profile $OCF_RESKEY_profile --cli-connect-timeout 10"
-#######################################################################
-
 
 usage() {
 	cat <<-EOT
@@ -123,6 +121,15 @@ Path to command line tools for AWS
 <content type="string" default="${OCF_RESKEY_awscli_default}" />
 </parameter>
 
+<parameter name="auth_type">
+<longdesc lang="en">
+Authentication type "key" for AccessKey and SecretAccessKey set via "aws configure",
+or "role" to use AWS Policies.
+</longdesc>
+<shortdesc lang="en">Authentication type</shortdesc>
+<content type="string" default="${OCF_RESKEY_auth_type_default}" />
+</parameter>
+
 <parameter name="profile">
 <longdesc lang="en">
 The name of the AWS CLI profile of the root account. This
@@ -196,7 +203,7 @@ r53_validate() {
 
 	# Check for required binaries
 	ocf_log debug "Checking for required binaries"
-	for command in curl dig; do
+	for command in "${OCF_RESKEY_awscli}" curl dig; do
 		check_binary "$command"
 	done
 
@@ -216,7 +223,10 @@ r53_validate() {
 	esac
 
 	# profile
-	[[ -z "$OCF_RESKEY_profile" ]] && ocf_log error "AWS CLI profile not set $OCF_RESKEY_profile!" && exit $OCF_ERR_CONFIGURED
+	if [ "x${OCF_RESKEY_auth_type}" = "xkey" ] && [ -z "$OCF_RESKEY_profile" ]; then
+		ocf_exit_reason "profile parameter not set"
+		return $OCF_ERR_CONFIGURED
+	fi
 
 	# TTL
 	[[ -z "$OCF_RESKEY_ttl" ]] && ocf_log error "TTL not set $OCF_RESKEY_ttl!" && exit $OCF_ERR_CONFIGURED
@@ -417,7 +427,6 @@ _update_record() {
 }
 
 ###############################################################################
-
 case $__OCF_ACTION in
 	usage|help)
 		usage
@@ -427,6 +436,26 @@ case $__OCF_ACTION in
 		metadata
 		exit $OCF_SUCCESS
 		;;
+esac
+
+AWSCLI_CMD="${OCF_RESKEY_awscli}"
+if [ "x${OCF_RESKEY_auth_type}" = "xkey" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --profile ${OCF_RESKEY_profile}"
+elif [ "x${OCF_RESKEY_auth_type}" = "xrole" ]; then
+	if [ -z "${OCF_RESKEY_region}" ]; then
+		ocf_exit_reason "region needs to be set when using role-based authentication"
+		exit $OCF_ERR_CONFIGURED
+	fi
+else
+	ocf_exit_reason "Incorrect auth_type: ${OCF_RESKEY_auth_type}"
+	exit $OCF_ERR_CONFIGURED
+fi
+if [ -n "${OCF_RESKEY_region}" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --region ${OCF_RESKEY_region}"
+fi
+AWSCLI_CMD="$AWSCLI_CMD --cli-connect-timeout 10"
+
+case $__OCF_ACTION in
 	start)
 		r53_validate || exit $?
 		r53_start
diff --git a/heartbeat/awseip b/heartbeat/awseip
index dc48460..49b0ca6 100755
--- a/heartbeat/awseip
+++ b/heartbeat/awseip
@@ -23,7 +23,8 @@
 #
 #  Prerequisites:
 #
-#  - preconfigured AWS CLI running environment (AccessKey, SecretAccessKey, etc.)
+#  - preconfigured AWS CLI running environment (AccessKey, SecretAccessKey, etc.) or
+#    (AWSRole) Setup up relevant AWS Policies to allow agent related functions to be executed.
 #  - a reserved secondary private IP address for EC2 instances high availability
 #  - IAM user role with the following permissions:
 #    * DescribeInstances
@@ -44,11 +45,15 @@
 # Defaults
 #
 OCF_RESKEY_awscli_default="/usr/bin/aws"
+OCF_RESKEY_auth_type_default="key"
 OCF_RESKEY_profile_default="default"
+OCF_RESKEY_region_default=""
 OCF_RESKEY_api_delay_default="3"
 
 : ${OCF_RESKEY_awscli=${OCF_RESKEY_awscli_default}}
+: ${OCF_RESKEY_auth_type=${OCF_RESKEY_auth_type_default}}
 : ${OCF_RESKEY_profile=${OCF_RESKEY_profile_default}}
+: ${OCF_RESKEY_region=${OCF_RESKEY_region_default}}
 : ${OCF_RESKEY_api_delay=${OCF_RESKEY_api_delay_default}}
 
 meta_data() {
@@ -63,7 +68,7 @@ Resource Agent for Amazon AWS Elastic IP Addresses.
 
 It manages AWS Elastic IP Addresses with awscli.
 
-Credentials needs to be setup by running "aws configure".
+Credentials needs to be setup by running "aws configure", or by using AWS Policies.
 
 See https://aws.amazon.com/cli/ for more information about awscli.
 </longdesc>
@@ -79,6 +84,15 @@ command line tools for aws services
 <content type="string" default="${OCF_RESKEY_awscli_default}" />
 </parameter>
 
+<parameter name="auth_type">
+<longdesc lang="en">
+Authentication type "key" for AccessKey and SecretAccessKey set via "aws configure",
+or "role" to use AWS Policies.
+</longdesc>
+<shortdesc lang="en">Authentication type</shortdesc>
+<content type="string" default="${OCF_RESKEY_auth_type_default}" />
+</parameter>
+
 <parameter name="profile">
 <longdesc lang="en">
 Valid AWS CLI profile name (see ~/.aws/config and 'aws configure')
@@ -111,6 +125,14 @@ predefined private ip address for ec2 instance
 <content type="string" default="" />
 </parameter>
 
+<parameter name="region" required="0">
+<longdesc lang="en">
+Region for AWS resource (required for role-based authentication)
+</longdesc>
+<shortdesc lang="en">Region</shortdesc>
+<content type="string" default="${OCF_RESKEY_region_default}" />
+</parameter>
+
 <parameter name="api_delay" unique="0">
 <longdesc lang="en">
 a short delay between API calls, to avoid sending API too quick
@@ -157,13 +179,13 @@ awseip_start() {
                 NETWORK_ID=$(curl -s http://169.254.169.254/latest/meta-data/network/interfaces/macs/${MAC}/interface-id -H "X-aws-ec2-metadata-token: $TOKEN")
             fi
         done
-        $AWSCLI --profile $OCF_RESKEY_profile ec2 associate-address  \
+        $AWSCLI_CMD ec2 associate-address  \
             --network-interface-id ${NETWORK_ID} \
             --allocation-id ${ALLOCATION_ID} \
             --private-ip-address ${PRIVATE_IP_ADDRESS}
         RET=$?
     else
-        $AWSCLI --profile $OCF_RESKEY_profile ec2 associate-address  \
+        $AWSCLI_CMD ec2 associate-address  \
             --instance-id ${INSTANCE_ID} \
             --allocation-id ${ALLOCATION_ID}
         RET=$?
@@ -183,7 +205,7 @@ awseip_start() {
 awseip_stop() {
     awseip_monitor || return $OCF_SUCCESS
 
-    ASSOCIATION_ID=$($AWSCLI --profile $OCF_RESKEY_profile --output json ec2 describe-addresses \
+    ASSOCIATION_ID=$($AWSCLI_CMD --output json ec2 describe-addresses \
                          --allocation-id ${ALLOCATION_ID} | grep -m 1 "AssociationId" | awk -F'"' '{print$4}')
 
     if [ -z "${ASSOCIATION_ID}" ]; then
@@ -191,9 +213,7 @@ awseip_stop() {
         return $OCF_NOT_RUNNING
     fi
 
-    $AWSCLI --profile ${OCF_RESKEY_profile} \
-        ec2 disassociate-address \
-        --association-id ${ASSOCIATION_ID}
+    $AWSCLI_CMD ec2 disassociate-address --association-id ${ASSOCIATION_ID}
     RET=$?
 
     # delay to avoid sending request too fast
@@ -208,7 +228,7 @@ awseip_stop() {
 }
 
 awseip_monitor() {
-    $AWSCLI --profile $OCF_RESKEY_profile ec2 describe-instances --instance-id "${INSTANCE_ID}" | grep -q "${ELASTIC_IP}"
+    $AWSCLI_CMD ec2 describe-instances --instance-id "${INSTANCE_ID}" | grep -q "${ELASTIC_IP}"
     RET=$?
 
     if [ $RET -ne 0 ]; then
@@ -218,9 +238,9 @@ awseip_monitor() {
 }
 
 awseip_validate() {
-    check_binary ${AWSCLI}
+    check_binary "${OCF_RESKEY_awscli}"
 
-    if [ -z "$OCF_RESKEY_profile" ]; then
+    if [ "x${OCF_RESKEY_auth_type}" = "xkey" ] && [ -z "$OCF_RESKEY_profile" ]; then
         ocf_exit_reason "profile parameter not set"
         return $OCF_ERR_CONFIGURED
     fi
@@ -238,9 +258,27 @@ case $__OCF_ACTION in
         meta_data
         exit $OCF_SUCCESS
         ;;
-esac 
+    usage|help)
+        awseip_usage
+        exit $OCF_SUCCESS
+        ;;
+esac
 
-AWSCLI="${OCF_RESKEY_awscli}"
+AWSCLI_CMD="${OCF_RESKEY_awscli}"
+if [ "x${OCF_RESKEY_auth_type}" = "xkey" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --profile ${OCF_RESKEY_profile}"
+elif [ "x${OCF_RESKEY_auth_type}" = "xrole" ]; then
+	if [ -z "${OCF_RESKEY_region}" ]; then
+		ocf_exit_reason "region needs to be set when using role-based authentication"
+		exit $OCF_ERR_CONFIGURED
+	fi
+else
+	ocf_exit_reason "Incorrect auth_type: ${OCF_RESKEY_auth_type}"
+	exit $OCF_ERR_CONFIGURED
+fi
+if [ -n "${OCF_RESKEY_region}" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --region ${OCF_RESKEY_region}"
+fi
 ELASTIC_IP="${OCF_RESKEY_elastic_ip}"
 ALLOCATION_ID="${OCF_RESKEY_allocation_id}"
 PRIVATE_IP_ADDRESS="${OCF_RESKEY_private_ip_address}"
@@ -272,10 +310,6 @@ case $__OCF_ACTION in
     validate|validate-all)
         awseip_validate
         ;;
-    usage|help)
-        awseip_usage
-        exit $OCF_SUCCESS
-        ;;
     *)
         awseip_usage
         exit $OCF_ERR_UNIMPLEMENTED
diff --git a/heartbeat/awsvip b/heartbeat/awsvip
index 037278e..bdb4d68 100755
--- a/heartbeat/awsvip
+++ b/heartbeat/awsvip
@@ -23,7 +23,8 @@
 #
 #  Prerequisites:
 #
-#  - preconfigured AWS CLI running environment (AccessKey, SecretAccessKey, etc.)
+#  - preconfigured AWS CLI running environment (AccessKey, SecretAccessKey, etc.) or
+#    (AWSRole) Setup up relevant AWS Policies to allow agent related functions to be executed.
 #  - a reserved secondary private IP address for EC2 instances high availablity
 #  - IAM user role with the following permissions:
 #    * DescribeInstances
@@ -43,11 +44,15 @@
 # Defaults
 #
 OCF_RESKEY_awscli_default="/usr/bin/aws"
+OCF_RESKEY_auth_type_default="key"
 OCF_RESKEY_profile_default="default"
+OCF_RESKEY_region_default=""
 OCF_RESKEY_api_delay_default="3"
 
 : ${OCF_RESKEY_awscli=${OCF_RESKEY_awscli_default}}
+: ${OCF_RESKEY_auth_type=${OCF_RESKEY_auth_type_default}}
 : ${OCF_RESKEY_profile=${OCF_RESKEY_profile_default}}
+: ${OCF_RESKEY_region=${OCF_RESKEY_region_default}}
 : ${OCF_RESKEY_api_delay=${OCF_RESKEY_api_delay_default}}
 
 meta_data() {
@@ -62,7 +67,7 @@ Resource Agent for Amazon AWS Secondary Private IP Addresses.
 
 It manages AWS Secondary Private IP Addresses with awscli.
 
-Credentials needs to be setup by running "aws configure".
+Credentials needs to be setup by running "aws configure", or by using AWS Policies.
 
 See https://aws.amazon.com/cli/ for more information about awscli.
 </longdesc>
@@ -78,6 +83,15 @@ command line tools for aws services
 <content type="string" default="${OCF_RESKEY_awscli_default}" />
 </parameter>
 
+<parameter name="auth_type">
+<longdesc lang="en">
+Authentication type "key" for AccessKey and SecretAccessKey set via "aws configure",
+or "role" to use AWS Policies.
+</longdesc>
+<shortdesc lang="en">Authentication type</shortdesc>
+<content type="string" default="${OCF_RESKEY_auth_type_default}" />
+</parameter>
+
 <parameter name="profile">
 <longdesc lang="en">
 Valid AWS CLI profile name (see ~/.aws/config and 'aws configure')
@@ -94,6 +108,14 @@ reserved secondary private ip for ec2 instance
 <content type="string" default="" />
 </parameter>
 
+<parameter name="region" required="0">
+<longdesc lang="en">
+Region for AWS resource (required for role-based authentication)
+</longdesc>
+<shortdesc lang="en">Region</shortdesc>
+<content type="string" default="${OCF_RESKEY_region_default}" />
+</parameter>
+
 <parameter name="api_delay" unique="0">
 <longdesc lang="en">
 a short delay between API calls, to avoid sending API too quick
@@ -131,7 +153,7 @@ END
 awsvip_start() {
     awsvip_monitor && return $OCF_SUCCESS
 
-    $AWSCLI --profile $OCF_RESKEY_profile ec2 assign-private-ip-addresses \
+    $AWSCLI_CMD ec2 assign-private-ip-addresses \
         --network-interface-id ${NETWORK_ID} \
         --private-ip-addresses ${SECONDARY_PRIVATE_IP} \
         --allow-reassignment
@@ -151,7 +173,7 @@ awsvip_start() {
 awsvip_stop() {
     awsvip_monitor || return $OCF_SUCCESS
 
-    $AWSCLI --profile $OCF_RESKEY_profile ec2 unassign-private-ip-addresses \
+    $AWSCLI_CMD ec2 unassign-private-ip-addresses \
         --network-interface-id ${NETWORK_ID} \
         --private-ip-addresses ${SECONDARY_PRIVATE_IP}
     RET=$?
@@ -168,7 +190,7 @@ awsvip_stop() {
 }
 
 awsvip_monitor() {
-    $AWSCLI --profile ${OCF_RESKEY_profile} ec2 describe-instances \
+    $AWSCLI_CMD ec2 describe-instances \
             --instance-id "${INSTANCE_ID}" \
             --query 'Reservations[].Instances[].NetworkInterfaces[].PrivateIpAddresses[].PrivateIpAddress[]' \
             --output text | \
@@ -182,9 +204,9 @@ awsvip_monitor() {
 }
 
 awsvip_validate() {
-    check_binary ${AWSCLI}
+    check_binary "${OCF_RESKEY_awscli}"
 
-    if [ -z "$OCF_RESKEY_profile" ]; then
+    if [ "x${OCF_RESKEY_auth_type}" = "xkey" ] && [ -z "$OCF_RESKEY_profile" ]; then
         ocf_exit_reason "profile parameter not set"
         return $OCF_ERR_CONFIGURED
     fi
@@ -202,9 +224,27 @@ case $__OCF_ACTION in
         meta_data
         exit $OCF_SUCCESS
         ;;
+    usage|help)
+        awsvip_usage
+        exit $OCF_SUCCESS
+        ;;
 esac
 
-AWSCLI="${OCF_RESKEY_awscli}"
+AWSCLI_CMD="${OCF_RESKEY_awscli}"
+if [ "x${OCF_RESKEY_auth_type}" = "xkey" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --profile ${OCF_RESKEY_profile}"
+elif [ "x${OCF_RESKEY_auth_type}" = "xrole" ]; then
+	if [ -z "${OCF_RESKEY_region}" ]; then
+		ocf_exit_reason "region needs to be set when using role-based authentication"
+		exit $OCF_ERR_CONFIGURED
+	fi
+else
+	ocf_exit_reason "Incorrect auth_type: ${OCF_RESKEY_auth_type}"
+	exit $OCF_ERR_CONFIGURED
+fi
+if [ -n "${OCF_RESKEY_region}" ]; then
+	AWSCLI_CMD="$AWSCLI_CMD --region ${OCF_RESKEY_region}"
+fi
 SECONDARY_PRIVATE_IP="${OCF_RESKEY_secondary_private_ip}"
 TOKEN=$(curl -sX PUT "http://169.254.169.254/latest/api/token" -H "X-aws-ec2-metadata-token-ttl-seconds: 21600")
 INSTANCE_ID=$(curl -s http://169.254.169.254/latest/meta-data/instance-id -H "X-aws-ec2-metadata-token: $TOKEN")
@@ -236,10 +276,6 @@ case $__OCF_ACTION in
     validate|validate-all)
         awsvip_validate
         ;;
-    usage|help)
-        awsvip_usage
-        exit $OCF_SUCCESS
-        ;;
     *)
         awsvip_usage
         exit $OCF_ERR_UNIMPLEMENTED
diff --git a/heartbeat/azure-lb b/heartbeat/azure-lb
index 7f585bf..198e71c 100755
--- a/heartbeat/azure-lb
+++ b/heartbeat/azure-lb
@@ -114,7 +114,7 @@ lb_start() {
 	cmd="$OCF_RESKEY_nc -l -k $OCF_RESKEY_port"
 	if [ $( basename $OCF_RESKEY_nc ) = 'socat' ]; then
 		#socat has different parameters
-		cmd="$OCF_RESKEY_nc -U TCP-LISTEN:$OCF_RESKEY_port,backlog=10,fork,reuseaddr /dev/null"
+		cmd="$OCF_RESKEY_nc -U TCP6-LISTEN:$OCF_RESKEY_port,backlog=10,fork,reuseaddr /dev/null"
 	fi
 	if ! lb_monitor; then
 		ocf_log debug "Starting $process: $cmd"
diff --git a/heartbeat/db2 b/heartbeat/db2
index 95447ab..1cd66f1 100755
--- a/heartbeat/db2
+++ b/heartbeat/db2
@@ -848,7 +848,7 @@ db2_notify() {
 
     # only interested in pre-start
     [  $OCF_RESKEY_CRM_meta_notify_type = pre \
-    -a $OCF_RESKEY_CRM_meta_notify_operation = start ] || return $OCF_SUCESS
+    -a $OCF_RESKEY_CRM_meta_notify_operation = start ] || return $OCF_SUCCESS
 
     # gets FIRST_ACTIVE_LOG
     db2_get_cfg $dblist || return $?
diff --git a/heartbeat/docker b/heartbeat/docker
index 2adcade..50523db 100755
--- a/heartbeat/docker
+++ b/heartbeat/docker
@@ -293,8 +293,8 @@ docker_simple_status()
 	VERSION_OUT=$(docker version)
 	version_ret=$?
 	if [ $version_ret -eq 1 ]; then
-		ocf_exit_reason "Docker service is in error state while checking for ${CONTAINER}, based on image, ${OCF_RESKEY_image}: ${VERSION_OUT}"
-		return $OCF_ERR_GENERIC
+		ocf_log err "Docker service is not running or in error state while checking for ${CONTAINER}, based on image, ${OCF_RESKEY_image}: ${VERSION_OUT}"
+		return $OCF_NOT_RUNNING
 	fi
 
 	container_exists
diff --git a/heartbeat/findif.sh b/heartbeat/findif.sh
index 5f1c19e..13484f8 100644
--- a/heartbeat/findif.sh
+++ b/heartbeat/findif.sh
@@ -29,10 +29,10 @@ prefixcheck() {
   fi
   return 0
 }
-getnetworkinfo()
+getloopbackinfo()
 {
   local line netinfo
-  ip -o -f inet route list match $OCF_RESKEY_ip scope host | (while read line;
+  ip -o -f inet route list match $OCF_RESKEY_ip table local scope host | (while read line;
   do
     netinfo=`echo $line | awk '{print $2}'`
     case $netinfo in
@@ -215,14 +215,14 @@ findif()
   fi
   if [ -n "$nic" ] ; then
     # NIC supports more than two.
-    set -- $(ip -o -f $family route list match $match $scope | grep "dev $nic " | awk 'BEGIN{best=0} /\// { mask=$1; sub(".*/", "", mask); if( int(mask)>=best ) { best=int(mask); best_ln=$0; } } END{print best_ln}')
+    set -- $(ip -o -f $family route list match $match $scope | grep "dev $nic " | sed -e 's,^\([0-9.]\+\) ,\1/32 ,;s,^\([0-9a-f:]\+\) ,\1/128 ,' | sort -t/ -k2,2nr)
   else
-    set -- $(ip -o -f $family route list match $match $scope | awk 'BEGIN{best=0} /\// { mask=$1; sub(".*/", "", mask); if( int(mask)>=best ) { best=int(mask); best_ln=$0; } } END{print best_ln}')
+    set -- $(ip -o -f $family route list match $match $scope | sed -e 's,^\([0-9.]\+\) ,\1/32 ,;s,^\([0-9a-f:]\+\) ,\1/128 ,' | sort -t/ -k2,2nr)
   fi
   if [ $# = 0 ] ; then
     case $OCF_RESKEY_ip in
     127.*)
-      set -- `getnetworkinfo`
+      set -- `getloopbackinfo`
       shift;;
     esac
   fi
diff --git a/heartbeat/galera.in b/heartbeat/galera.in
index 6aed3e4..b518595 100755
--- a/heartbeat/galera.in
+++ b/heartbeat/galera.in
@@ -822,6 +822,11 @@ galera_promote()
         return $rc
     fi
 
+    # At this point, the mysql pidfile is created on disk and the
+    # mysql server is reacheable via its UNIX socket. If we are a
+    # joiner, SST transfers (rsync) have finished, but an IST may
+    # still be requested or ongoing
+
     galera_monitor
     rc=$?
     if [ $rc != $OCF_SUCCESS -a $rc != $OCF_RUNNING_MASTER ]; then
@@ -835,12 +840,6 @@ galera_promote()
         return $OCF_ERR_GENERIC
     fi
 
-    is_primary
-    if [ $? -ne 0 ]; then
-        ocf_exit_reason "Failure. Master instance started, but is not in Primary mode."
-        return $OCF_ERR_GENERIC
-    fi
-
     if ocf_is_true $bootstrap; then
         promote_everyone
         clear_bootstrap_node
@@ -991,8 +990,18 @@ galera_monitor()
         fi
         rc=$OCF_RUNNING_MASTER
     else
-        ocf_exit_reason "local node <${NODENAME}> is started, but not in primary mode. Unknown state."
-        rc=$OCF_ERR_GENERIC
+        # It seems that with recent galera (26.4+), a joiner that is
+        # connected to a Primary component and is preparing its IST
+        # request might still temporarily report its state as
+        # Non-Primary.  Do not fail in this case as the promote
+        # operation will loop until the IST finishes or the promote
+        # times out.
+        if [ "$__OCF_ACTION" = "promote" ] && ! ocf_is_true $(is_bootstrap); then
+                ocf_log info "local node <${NODENAME}> is receiving a State Transfer."
+        else
+            ocf_exit_reason "local node <${NODENAME}> is started, but not in primary mode. Unknown state."
+            rc=$OCF_ERR_GENERIC
+        fi
     fi
 
     return $rc
diff --git a/heartbeat/lxd-info.in b/heartbeat/lxd-info.in
index f9fb44a..88b15e5 100644
--- a/heartbeat/lxd-info.in
+++ b/heartbeat/lxd-info.in
@@ -89,7 +89,7 @@ END
 LXDInfoStats() {
 	value=$(lxc list|grep -ci RUNNING)
 	echo -e "lxd_containers:\t$value"
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n lxd_containers -v $value
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -n lxd_containers -v $value
 }
 
 LXDInfo_usage() {
@@ -108,7 +108,7 @@ LXDInfo_start() {
 
 LXDInfo_stop() {
 	rm -f $OCF_RESKEY_pidfile
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -S state -n lxd_containers
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -n lxd_containers
 	exit $OCF_SUCCESS
 }
 
diff --git a/heartbeat/machine-info.in b/heartbeat/machine-info.in
index bfa7ce5..6bd328a 100644
--- a/heartbeat/machine-info.in
+++ b/heartbeat/machine-info.in
@@ -90,7 +90,7 @@ END
 MachineInfoStats() {
 	value=$(machinectl|awk '/machines listed/ {print $1}')
 	echo -e "machines:\t$value"
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n machines -v $value
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -n machines -v $value
 }
 
 MachineInfo_usage() {
@@ -109,7 +109,7 @@ MachineInfo_start() {
 
 MachineInfo_stop() {
 	rm -f $OCF_RESKEY_pidfile
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -S state -n machines
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -n machines
 	exit $OCF_SUCCESS
 }
 
diff --git a/heartbeat/nfsserver b/heartbeat/nfsserver
index 8838195..5793d7a 100755
--- a/heartbeat/nfsserver
+++ b/heartbeat/nfsserver
@@ -711,8 +711,17 @@ inject_unshare_uts_name_into_systemd_units ()
 		test -d "$dir" || mkdir -p "$dir"
 		test -e "$dropin" && rm -f "$dropin"
 
-		# NOTE: additional ExecStart= might exist in the drop-in files, eg. openSUSE
-		edited_exec_start=$(systemctl cat $svc | sed -ne "s#^ExecStart=\\([-+:!@]*\\)\\(.\+\\)#ExecStart=\\1/usr/bin/unshare --uts /bin/sh -c 'hostname \${NFS_SERVER_SCOPE}; exec \"\$@\"' -- \\2#p" | tail -1)
+		# NOTE: multiple ExecStart may exist,
+		# even additional `ExecStart=` to reset the list might exist in the drop-in files.
+		# We are interested in only the "currently relevant" set of ExecStart.
+		local unshare_uts_set_hostname='/usr/bin/unshare --uts /bin/sh -c '\''hostname ${NFS_SERVER_SCOPE}; exec "$@"'\'' -- '
+		edited_exec_start=$(systemctl cat $svc \
+			| sed -n \
+				-e '/^ExecStart=/ H;'				\
+				-e '/^ExecStart=[[:space:]]*$/ {s/.*//;h};'	\
+				-e '${g;s/^\n//;p}' \
+			| sed -e 's#^\(ExecStart=[-+:!@]*\)\(.\+\)#\1'"$unshare_uts_set_hostname"'\2#'
+		)
 
 		cat > "$dropin" <<___
 [Service]
diff --git a/heartbeat/ocf-shellfuncs.in b/heartbeat/ocf-shellfuncs.in
index 6852163..a617e00 100644
--- a/heartbeat/ocf-shellfuncs.in
+++ b/heartbeat/ocf-shellfuncs.in
@@ -22,7 +22,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 # 
 
-# Build version: 204f146196774ded1581aed1b6acd0d562b4f958
+# Build version: 72b4771db9437c36931c0f673210f6fe6ed4f8ed
 
 # TODO: Some of this should probably split out into a generic OCF
 # library for shell scripts, but for the time being, we'll just use it
diff --git a/heartbeat/ocivip b/heartbeat/ocivip
index 053646d..f146807 100755
--- a/heartbeat/ocivip
+++ b/heartbeat/ocivip
@@ -221,7 +221,7 @@ SECONDARY_PRIVATE_IP="${OCF_RESKEY_secondary_private_ip}"
 CIDR_NETMASK="${OCF_RESKEY_cidr_netmask}"
 INTERFACE_ALIAS="${OCF_RESKEY_interface_alias}"
 VNIC_ID="$(curl -s -H "Authorization: Bearer Oracle" -L http://169.254.169.254/opc/v2/vnics/ | jq -r '.[0].vnicId')"
-PRIMARY_IFACE=$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)')
+PRIMARY_IFACE=$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)' | head -n1)
 
 case $__OCF_ACTION in
     start)
diff --git a/heartbeat/openstack-floating-ip b/heartbeat/openstack-floating-ip
index 7317f19..a7c0728 100755
--- a/heartbeat/openstack-floating-ip
+++ b/heartbeat/openstack-floating-ip
@@ -143,13 +143,13 @@ osflip_monitor() {
 	for port in $node_port_ids ; do
 		if echo "$result" | grep -q $port ; then
 			floating_ip=$(echo "$result" | awk '/floating_ip_address/ {print $2}')
-			${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n openstack_floating_ip -v $floating_ip
+			${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -n openstack_floating_ip -v $floating_ip
 
 			return $OCF_SUCCESS
 		fi
 	done
 
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -S state -n openstack_floating_ip
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -n openstack_floating_ip
 	ocf_log warn "$OCF_RESKEY_ip_id is not attached to any fixed address"
 	return $OCF_NOT_RUNNING
 }
diff --git a/heartbeat/openstack-info.in b/heartbeat/openstack-info.in
index 6502f1d..876e833 100755
--- a/heartbeat/openstack-info.in
+++ b/heartbeat/openstack-info.in
@@ -164,10 +164,12 @@ OSInfoStats() {
 			--format json \
 			--column fixed_ips \
 			${port_id}")
-		subnet_id=$(echo "$subnet_result" |
+		subnet_ids=$(echo "$subnet_result" |
 			grep -P '\"subnet_id\": \".*\",$' |
 			grep -P -o '[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{12}')
-		value="${value}${subnet_id}:${port_id},"
+		for subnet_id in $subnet_ids; do
+			value="${value}${subnet_id}:${port_id},"
+		done
 	done
 	value=${value%,}
 
diff --git a/heartbeat/openstack-virtual-ip b/heartbeat/openstack-virtual-ip
index 361357d..e54926a 100755
--- a/heartbeat/openstack-virtual-ip
+++ b/heartbeat/openstack-virtual-ip
@@ -137,12 +137,12 @@ osvip_monitor() {
 		--column allowed_address_pairs \
 		${node_port_id}")
 	if echo "$result" | grep -q "$OCF_RESKEY_ip"; then
-		${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -S status -n openstack_virtual_ip -v $OCF_RESKEY_ip
+		${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -n openstack_virtual_ip -v $OCF_RESKEY_ip
 
 		return $OCF_SUCCESS
 	fi
 
-	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -S state -n openstack_virtual_ip
+	${HA_SBIN_DIR}/attrd_updater ${OCF_RESKEY_delay} -D -n openstack_virtual_ip
 	ocf_log warn "$OCF_RESKEY_ip is not attached to any fixed address"
 	return $OCF_NOT_RUNNING
 }
diff --git a/heartbeat/portblock b/heartbeat/portblock
index 06fcc19..e88ecc2 100755
--- a/heartbeat/portblock
+++ b/heartbeat/portblock
@@ -266,7 +266,14 @@ active_grep_pat()
     local src=$3
     local dst=$any
   fi
-  echo "^DROP${w}${1}${w}--${w}${src}${w}${dst}${w}multiport${w}${4}ports${w}${2}$"
+  # iptables 1.8.9 briefly broke the output format, returning the
+  # numeric protocol value instead of a string. Support both variants.
+  if [ "$1" = "tcp" ]; then
+    local prot="(tcp|6)"
+  else
+    local prot="(udp|17)"
+  fi
+  echo "^DROP${w}${prot}${w}--${w}${src}${w}${dst}${w}multiport${w}${4}ports${w}${2}$"
 }
 
 #chain_isactive  {udp|tcp} portno,portno ip chain
@@ -274,7 +281,7 @@ chain_isactive()
 {
   [ "$4" = "OUTPUT" ] && ds="s" || ds="d"
   PAT=$(active_grep_pat "$1" "$2" "$3" "$ds")
-  $IPTABLES $wait -n -L "$4" | grep "$PAT" >/dev/null
+  $IPTABLES $wait -n -L "$4" | grep -qE "$PAT"
 }
 
 # netstat -tn and ss -Htn, split on whitespace and colon,
@@ -321,7 +328,6 @@ save_tcp_connections()
 tickle_remote()
 {
 	[ -z "$OCF_RESKEY_tickle_dir" ] && return
-	echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle
 	f=$OCF_RESKEY_tickle_dir/$OCF_RESKEY_ip
 	[ -r $f ] || return
 	$TICKLETCP -n 3 < $f