Merging upstream version 1.72.1+dfsg1.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 232 insertions, 1 deletions

diff --git a/vendor/tokio/src/net/unix/split.rs b/vendor/tokio/src/net/unix/split.rs
index 97214f7a7..6fc7067a7 100644
--- a/vendor/tokio/src/net/unix/split.rs
+++ b/vendor/tokio/src/net/unix/split.rs
@@ -8,14 +8,19 @@
 //! split has no associated overhead and enforces all invariants at the type
 //! level.
 
-use crate::io::{AsyncRead, AsyncWrite, ReadBuf};
+use crate::io::{AsyncRead, AsyncWrite, Interest, ReadBuf, Ready};
 use crate::net::UnixStream;
 
+use crate::net::unix::SocketAddr;
 use std::io;
 use std::net::Shutdown;
 use std::pin::Pin;
 use std::task::{Context, Poll};
 
+cfg_io_util! {
+    use bytes::BufMut;
+}
+
 /// Borrowed read half of a [`UnixStream`], created by [`split`].
 ///
 /// Reading from a `ReadHalf` is usually done using the convenience methods found on the
@@ -47,6 +52,232 @@ pub(crate) fn split(stream: &mut UnixStream) -> (ReadHalf<'_>, WriteHalf<'_>) {
     (ReadHalf(stream), WriteHalf(stream))
 }
 
+impl ReadHalf<'_> {
+    /// Wait for any of the requested ready states.
+    ///
+    /// This function is usually paired with [`try_read()`]. It can be used instead
+    /// of [`readable()`] to check the returned ready set for [`Ready::READABLE`]
+    /// and [`Ready::READ_CLOSED`] events.
+    ///
+    /// The function may complete without the socket being ready. This is a
+    /// false-positive and attempting an operation will return with
+    /// `io::ErrorKind::WouldBlock`. The function can also return with an empty
+    /// [`Ready`] set, so you should always check the returned value and possibly
+    /// wait again if the requested states are not set.
+    ///
+    /// This function is equivalent to [`UnixStream::ready`].
+    ///
+    /// [`try_read()`]: Self::try_read
+    /// [`readable()`]: Self::readable
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to read or write that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
+        self.0.ready(interest).await
+    }
+
+    /// Waits for the socket to become readable.
+    ///
+    /// This function is equivalent to `ready(Interest::READABLE)` and is usually
+    /// paired with `try_read()`.
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to read that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn readable(&self) -> io::Result<()> {
+        self.0.readable().await
+    }
+
+    /// Tries to read data from the stream into the provided buffer, returning how
+    /// many bytes were read.
+    ///
+    /// Receives any pending data from the socket but does not wait for new data
+    /// to arrive. On success, returns the number of bytes read. Because
+    /// `try_read()` is non-blocking, the buffer does not have to be stored by
+    /// the async task and can exist entirely on the stack.
+    ///
+    /// Usually, [`readable()`] or [`ready()`] is used with this function.
+    ///
+    /// [`readable()`]: Self::readable()
+    /// [`ready()`]: Self::ready()
+    ///
+    /// # Return
+    ///
+    /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+    /// number of bytes read. If `n` is `0`, then it can indicate one of two scenarios:
+    ///
+    /// 1. The stream's read half is closed and will no longer yield data.
+    /// 2. The specified buffer was 0 bytes in length.
+    ///
+    /// If the stream is not ready to read data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    pub fn try_read(&self, buf: &mut [u8]) -> io::Result<usize> {
+        self.0.try_read(buf)
+    }
+
+    cfg_io_util! {
+        /// Tries to read data from the stream into the provided buffer, advancing the
+        /// buffer's internal cursor, returning how many bytes were read.
+        ///
+        /// Receives any pending data from the socket but does not wait for new data
+        /// to arrive. On success, returns the number of bytes read. Because
+        /// `try_read_buf()` is non-blocking, the buffer does not have to be stored by
+        /// the async task and can exist entirely on the stack.
+        ///
+        /// Usually, [`readable()`] or [`ready()`] is used with this function.
+        ///
+        /// [`readable()`]: Self::readable()
+        /// [`ready()`]: Self::ready()
+        ///
+        /// # Return
+        ///
+        /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+        /// number of bytes read. `Ok(0)` indicates the stream's read half is closed
+        /// and will no longer yield data. If the stream is not ready to read data
+        pub fn try_read_buf<B: BufMut>(&self, buf: &mut B) -> io::Result<usize> {
+            self.0.try_read_buf(buf)
+        }
+    }
+
+    /// Tries to read data from the stream into the provided buffers, returning
+    /// how many bytes were read.
+    ///
+    /// Data is copied to fill each buffer in order, with the final buffer
+    /// written to possibly being only partially filled. This method behaves
+    /// equivalently to a single call to [`try_read()`] with concatenated
+    /// buffers.
+    ///
+    /// Receives any pending data from the socket but does not wait for new data
+    /// to arrive. On success, returns the number of bytes read. Because
+    /// `try_read_vectored()` is non-blocking, the buffer does not have to be
+    /// stored by the async task and can exist entirely on the stack.
+    ///
+    /// Usually, [`readable()`] or [`ready()`] is used with this function.
+    ///
+    /// [`try_read()`]: Self::try_read()
+    /// [`readable()`]: Self::readable()
+    /// [`ready()`]: Self::ready()
+    ///
+    /// # Return
+    ///
+    /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+    /// number of bytes read. `Ok(0)` indicates the stream's read half is closed
+    /// and will no longer yield data. If the stream is not ready to read data
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    pub fn try_read_vectored(&self, bufs: &mut [io::IoSliceMut<'_>]) -> io::Result<usize> {
+        self.0.try_read_vectored(bufs)
+    }
+
+    /// Returns the socket address of the remote half of this connection.
+    pub fn peer_addr(&self) -> io::Result<SocketAddr> {
+        self.0.peer_addr()
+    }
+
+    /// Returns the socket address of the local half of this connection.
+    pub fn local_addr(&self) -> io::Result<SocketAddr> {
+        self.0.local_addr()
+    }
+}
+
+impl WriteHalf<'_> {
+    /// Waits for any of the requested ready states.
+    ///
+    /// This function is usually paired with [`try_write()`]. It can be used instead
+    /// of [`writable()`] to check the returned ready set for [`Ready::WRITABLE`]
+    /// and [`Ready::WRITE_CLOSED`] events.
+    ///
+    /// The function may complete without the socket being ready. This is a
+    /// false-positive and attempting an operation will return with
+    /// `io::ErrorKind::WouldBlock`. The function can also return with an empty
+    /// [`Ready`] set, so you should always check the returned value and possibly
+    /// wait again if the requested states are not set.
+    ///
+    /// This function is equivalent to [`UnixStream::ready`].
+    ///
+    /// [`try_write()`]: Self::try_write
+    /// [`writable()`]: Self::writable
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to read or write that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
+        self.0.ready(interest).await
+    }
+
+    /// Waits for the socket to become writable.
+    ///
+    /// This function is equivalent to `ready(Interest::WRITABLE)` and is usually
+    /// paired with `try_write()`.
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to write that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn writable(&self) -> io::Result<()> {
+        self.0.writable().await
+    }
+
+    /// Tries to write a buffer to the stream, returning how many bytes were
+    /// written.
+    ///
+    /// The function will attempt to write the entire contents of `buf`, but
+    /// only part of the buffer may be written.
+    ///
+    /// This function is usually paired with `writable()`.
+    ///
+    /// # Return
+    ///
+    /// If data is successfully written, `Ok(n)` is returned, where `n` is the
+    /// number of bytes written. If the stream is not ready to write data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    pub fn try_write(&self, buf: &[u8]) -> io::Result<usize> {
+        self.0.try_write(buf)
+    }
+
+    /// Tries to write several buffers to the stream, returning how many bytes
+    /// were written.
+    ///
+    /// Data is written from each buffer in order, with the final buffer read
+    /// from possible being only partially consumed. This method behaves
+    /// equivalently to a single call to [`try_write()`] with concatenated
+    /// buffers.
+    ///
+    /// This function is usually paired with `writable()`.
+    ///
+    /// [`try_write()`]: Self::try_write()
+    ///
+    /// # Return
+    ///
+    /// If data is successfully written, `Ok(n)` is returned, where `n` is the
+    /// number of bytes written. If the stream is not ready to write data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    pub fn try_write_vectored(&self, buf: &[io::IoSlice<'_>]) -> io::Result<usize> {
+        self.0.try_write_vectored(buf)
+    }
+
+    /// Returns the socket address of the remote half of this connection.
+    pub fn peer_addr(&self) -> io::Result<SocketAddr> {
+        self.0.peer_addr()
+    }
+
+    /// Returns the socket address of the local half of this connection.
+    pub fn local_addr(&self) -> io::Result<SocketAddr> {
+        self.0.local_addr()
+    }
+}
+
 impl AsyncRead for ReadHalf<'_> {
     fn poll_read(
         self: Pin<&mut Self>,