path: root/src/bootstrap/README.md

# rustbuild - Bootstrapping Rust

This is an in-progress README which is targeted at helping to explain how Rust
is bootstrapped and in general, some of the technical details of the build
system.

## Using rustbuild

The rustbuild build system has a primary entry point, a top level `x.py` script:

```sh
$ python ./x.py build
```

Note that if you're on Unix, you should be able to execute the script directly:

```sh
$ ./x.py build
```

The script accepts commands, flags, and arguments to determine what to do:

* `build` - a general purpose command for compiling code. Alone, `build` will
  bootstrap the entire compiler, and otherwise, arguments passed indicate what to
  build. For example:

  ```
  # build the whole compiler
  ./x.py build --stage 2

  # build the stage1 compiler
  ./x.py build

  # build stage0 libstd
  ./x.py build --stage 0 library/std

  # build a particular crate in stage0
  ./x.py build --stage 0 library/test
  ```

  If files that would normally be rebuilt from stage 0 are dirty, the rebuild can be
  overridden using `--keep-stage 0`. Using `--keep-stage n` will skip all steps
  that belong to stage n or earlier:

  ```
  # build stage 1, keeping old build products for stage 0
  ./x.py build --keep-stage 0
  ```

* `test` - a command for executing unit tests. Like the `build` command, this
  will execute the entire test suite by default, and otherwise, it can be used to
  select which test suite is run:

  ```
  # run all unit tests
  ./x.py test

  # execute tool tests
  ./x.py test tidy

  # execute the UI test suite
  ./x.py test src/test/ui

  # execute only some tests in the UI test suite
  ./x.py test src/test/ui --test-args substring-of-test-name

  # execute tests in the standard library in stage0
  ./x.py test --stage 0 library/std

  # execute tests in the core and standard library in stage0,
  # without running doc tests (thus avoid depending on building the compiler)
  ./x.py test --stage 0 --no-doc library/core library/std

  # execute all doc tests
  ./x.py test src/doc
  ```

* `doc` - a command for building documentation. Like above, can take arguments
  for what to document.

## Configuring rustbuild

There are currently two methods for configuring the rustbuild build system.

First, rustbuild offers a TOML-based configuration system with a `config.toml`
file. An example of this configuration can be found at `config.toml.example`,
and the configuration file can also be passed as `--config path/to/config.toml`
if the build system is being invoked manually (via the python script).

Next, the `./configure` options serialized in `config.mk` will be
parsed and read. That is, if any `./configure` options are passed, they'll be
handled naturally. `./configure` should almost never be used for local
installations, and is primarily useful for CI. Prefer to customize behavior
using `config.toml`.

Finally, rustbuild makes use of the [cc-rs crate] which has [its own
method][env-vars] of configuring C compilers and C flags via environment
variables.

[cc-rs crate]: https://github.com/alexcrichton/cc-rs
[env-vars]: https://github.com/alexcrichton/cc-rs#external-configuration-via-environment-variables

## Build stages

The rustbuild build system goes through a few phases to actually build the
compiler. What actually happens when you invoke rustbuild is:

1. The entry point script, `x.py` is run. This script is
   responsible for downloading the stage0 compiler/Cargo binaries, and it then
   compiles the build system itself (this folder). Finally, it then invokes the
   actual `bootstrap` binary build system.
2. In Rust, `bootstrap` will slurp up all configuration, perform a number of
   sanity checks (whether compilers exist, for example), and then start building the
   stage0 artifacts.
3. The stage0 `cargo`, downloaded earlier, is used to build the standard library
   and the compiler, and then these binaries are then copied to the `stage1`
   directory. That compiler is then used to generate the stage1 artifacts which
   are then copied to the stage2 directory, and then finally, the stage2
   artifacts are generated using that compiler.

The goal of each stage is to (a) leverage Cargo as much as possible and failing
that (b) leverage Rust as much as possible!

## Incremental builds

You can configure rustbuild to use incremental compilation with the
`--incremental` flag:

```sh
$ ./x.py build --incremental
```

The `--incremental` flag will store incremental compilation artifacts
in `build/<host>/stage0-incremental`. Note that we only use incremental
compilation for the stage0 -> stage1 compilation -- this is because
the stage1 compiler is changing, and we don't try to cache and reuse
incremental artifacts across different versions of the compiler.

You can always drop the `--incremental` to build as normal (but you
will still be using the local nightly as your bootstrap).

## Directory Layout

This build system houses all output under the `build` directory, which looks
like this:

```sh
# Root folder of all output. Everything is scoped underneath here
build/

  # Location where the stage0 compiler downloads are all cached. This directory
  # only contains the tarballs themselves, as they're extracted elsewhere.
  cache/
    2015-12-19/
    2016-01-15/
    2016-01-21/
    ...

  # Output directory for building this build system itself. The stage0
  # cargo/rustc are used to build the build system into this location.
  bootstrap/
    debug/
    release/

  # Output of the dist-related steps like dist-std, dist-rustc, and dist-docs
  dist/

  # Temporary directory used for various input/output as part of various stages
  tmp/

  # Each remaining directory is scoped by the "host" triple of compilation at
  # hand.
  x86_64-unknown-linux-gnu/

    # The build artifacts for the `compiler-rt` library for the target that
    # this folder is under. The exact layout here will likely depend on the
    # platform, and this is also built with CMake, so the build system is
    # also likely different.
    compiler-rt/
      build/

    # Output folder for LLVM if it is compiled for this target
    llvm/

      # build folder (e.g. the platform-specific build system). Like with
      # compiler-rt, this is compiled with CMake
      build/

      # Installation of LLVM. Note that we run the equivalent of 'make install'
      # for LLVM, to setup these folders.
      bin/
      lib/
      include/
      share/
      ...

    # Output folder for all documentation of this target. This is what's filled
    # in whenever the `doc` step is run.
    doc/

    # Output for all compiletest-based test suites
    test/
      ui/
      debuginfo/
      ...

    # Location where the stage0 Cargo and Rust compiler are unpacked. This
    # directory is purely an extracted and overlaid tarball of these two (done
    # by the bootstrap python script). In theory, the build system does not
    # modify anything under this directory afterwards.
    stage0/

    # These to-build directories are the cargo output directories for builds of
    # the standard library and compiler, respectively. Internally, these may also
    # have other target directories, which represent artifacts being compiled
    # from the host to the specified target.
    #
    # Essentially, each of these directories is filled in by one `cargo`
    # invocation. The build system instruments calling Cargo in the right order
    # with the right variables to ensure that these are filled in correctly.
    stageN-std/
    stageN-test/
    stageN-rustc/
    stageN-tools/

    # This is a special case of the above directories, **not** filled in via
    # Cargo but rather the build system itself. The stage0 compiler already has
    # a set of target libraries for its own host triple (in its own sysroot)
    # inside of stage0/. When we run the stage0 compiler to bootstrap more
    # things, however, we don't want to use any of these libraries (as those are
    # the ones that we're building). So essentially, when the stage1 compiler is
    # being compiled (e.g. after libstd has been built), *this* is used as the
    # sysroot for the stage0 compiler being run.
    #
    # Basically, this directory is just a temporary artifact used to configure the
    # stage0 compiler to ensure that the libstd that we just built is used to
    # compile the stage1 compiler.
    stage0-sysroot/lib/

    # These output directories are intended to be standalone working
    # implementations of the compiler (corresponding to each stage). The build
    # system will link (using hard links) output from stageN-{std,rustc} into
    # each of these directories.
    #
    # In theory, there is no extra build output in these directories.
    stage1/
    stage2/
    stage3/
```

## Cargo projects

The current build is unfortunately not quite as simple as `cargo build` in a
directory, but rather the compiler is split into three different Cargo projects:

* `library/std` - the standard library
* `library/test` - testing support, depends on libstd
* `compiler/rustc` - the actual compiler itself

Each "project" has a corresponding Cargo.lock file with all dependencies, and
this means that building the compiler involves running Cargo three times. The
structure here serves two goals:

1. Facilitating dependencies coming from crates.io. These dependencies don't
   depend on `std`, so libstd is a separate project compiled ahead of time
   before the actual compiler builds.
2. Splitting "host artifacts" from "target artifacts". That is, when building
   code for an arbitrary target, you don't need the entire compiler, but you'll
   end up needing libraries like libtest that depend on std but also want to use
   crates.io dependencies. Hence, libtest is split out as its own project that
   is sequenced after `std` but before `rustc`. This project is built for all
   targets.

There is some loss in build parallelism here because libtest can be compiled in
parallel with a number of rustc artifacts, but in theory, the loss isn't too bad!

## Build tools

We've actually got quite a few tools that we use in the compiler's build system
and for testing. To organize these, each tool is a project in `src/tools` with a
corresponding `Cargo.toml`. All tools are compiled with Cargo (currently having
independent `Cargo.lock` files) and do not currently explicitly depend on the
compiler or standard library. Compiling each tool is sequenced after the
appropriate libstd/libtest/librustc compile above.

## Extending rustbuild

So, you'd like to add a feature to the rustbuild build system or just fix a bug.
Great! One of the major motivational factors for moving away from `make` is that
Rust is in theory much easier to read, modify, and write. If you find anything
excessively confusing, please open an issue on this, and we'll try to get it
documented or simplified, pronto.

First up, you'll probably want to read over the documentation above, as that'll
give you a high level overview of what rustbuild is doing. You also probably
want to play around a bit yourself by just getting it up and running before you
dive too much into the actual build system itself.

After that, each module in rustbuild should have enough documentation to keep
you up and running. Some general areas that you may be interested in modifying
are:

* Adding a new build tool? Take a look at `bootstrap/tool.rs` for examples of
  other tools.
* Adding a new compiler crate? Look no further! Adding crates can be done by
  adding a new directory with `Cargo.toml` followed by configuring all
  `Cargo.toml` files accordingly.
* Adding a new dependency from crates.io? This should just work inside the
  compiler artifacts stage (everything other than libtest and libstd).
* Adding a new configuration option? You'll want to modify `bootstrap/flags.rs`
  for command line flags and then `bootstrap/config.rs` to copy the flags to the
  `Config` struct.
* Adding a sanity check? Take a look at `bootstrap/sanity.rs`.

If you make a major change, please remember to:

+ Update `VERSION` in `src/bootstrap/main.rs`.
* Update `changelog-seen = N` in `config.toml.example`.
* Add an entry in `src/bootstrap/CHANGELOG.md`.

A 'major change' includes

* A new option or
* A change in the default options.

Changes that do not affect contributors to the compiler or users
building rustc from source don't need an update to `VERSION`.

If you have any questions, feel free to reach out on the `#t-infra` channel in
the [Rust Zulip server][rust-zulip] or ask on internals.rust-lang.org. When
you encounter bugs, please file issues on the rust-lang/rust issue tracker.

[rust-zulip]: https://rust-lang.zulipchat.com/#narrow/stream/242791-t-infra