Adding upstream version 2:4.20.0+dfsg.upstream/2%4.20.0+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 393 insertions, 0 deletions

diff --git a/third_party/heimdal/tests/kdc/check-pkinit.in b/third_party/heimdal/tests/kdc/check-pkinit.in
new file mode 100644
index 0000000..571a64e
--- /dev/null
+++ b/third_party/heimdal/tests/kdc/check-pkinit.in
@@ -0,0 +1,393 @@
+#!/bin/sh
+#
+# Copyright (c) 2006 - 2008 Kungliga Tekniska Högskolan
+# (Royal Institute of Technology, Stockholm, Sweden). 
+# All rights reserved. 
+#
+# Redistribution and use in source and binary forms, with or without 
+# modification, are permitted provided that the following conditions 
+# are met: 
+#
+# 1. Redistributions of source code must retain the above copyright 
+#    notice, this list of conditions and the following disclaimer. 
+#
+# 2. Redistributions in binary form must reproduce the above copyright 
+#    notice, this list of conditions and the following disclaimer in the 
+#    documentation and/or other materials provided with the distribution. 
+#
+# 3. Neither the name of the Institute nor the names of its contributors 
+#    may be used to endorse or promote products derived from this software 
+#    without specific prior written permission. 
+#
+# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+# SUCH DAMAGE. 
+
+top_builddir="@top_builddir@"
+env_setup="@env_setup@"
+objdir="@objdir@"
+
+testfailed="echo test failed; cat messages.log; exit 1"
+
+. ${env_setup}
+
+# If there is no useful db support compiled in, disable test
+${have_db} || exit 77
+
+R=TEST.H5L.SE
+
+port=@port@
+
+kadmin="${kadmin} -l -r $R"
+kdc="${kdc} --addresses=localhost -P $port"
+
+server=host/datan.test.h5l.se
+cache="FILE:${objdir}/cache.krb5"
+keyfile="${hx509_data}/key.der"
+keyfile2="${hx509_data}/key2.der"
+
+kinit="${kinit} -c $cache ${afs_no_afslog}"
+klistjson="${klist} --json -c $cache"
+klistplain="${klist} -c $cache"
+klist="${klist} --hidden -v -c $cache"
+kgetcred="${kgetcred} -c $cache"
+kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"
+kx509="${kx509} -c $cache"
+
+KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
+export KRB5_CONFIG
+HEIM_PIDFILE_DIR=$objdir
+export HEIM_PIDFILE_DIR
+HEIM_IPC_DIR=$objdir
+export HEIM_IPC_DIR
+
+
+rsa=yes
+pkinit=no
+if ${hxtool} info | grep 'rsa: hx509 null RSA' > /dev/null ; then
+    rsa=no
+fi
+if ${hxtool} info | grep 'rand: not available' > /dev/null ; then
+    rsa=no
+fi
+
+if ${kinit} --help 2>&1 | grep "CA certificates" > /dev/null; then
+    pkinit=yes
+fi
+
+# If we doesn't support pkinit and have RSA, give up
+if test "$pkinit" != yes -o "$rsa" != yes ; then
+    exit 77
+fi
+
+
+rm -f current-db*
+rm -f out-*
+rm -f mkey.file*
+
+> messages.log
+
+echo Creating database
+${kadmin} \
+    init \
+    --realm-max-ticket-life=1day \
+    --realm-max-renewable-life=1month \
+    ${R} || exit 1
+
+${kadmin} modify --max-ticket-life=5d krbtgt/${R}@${R} || exit 1
+${kadmin} add -p foo --use-defaults foo@${R} || exit 1
+${kadmin} add -p bar --use-defaults bar@${R} || exit 1
+${kadmin} add -p baz --use-defaults baz@${R} || exit 1
+${kadmin} add -p foo --use-defaults host/server.test.h5l.se@${R} || exit 1
+${kadmin} modify --alias=baz2\\@test.h5l.se@${R} baz@${R} || exit 1
+${kadmin} modify --pkinit-acl="CN=baz,DC=test,DC=h5l,DC=se" baz@${R} || exit 1
+
+${kadmin} add -p kaka --use-defaults ${server}@${R} || exit 1
+
+echo "Doing database check"
+${kadmin} check ${R} || exit 1
+
+# XXX Do not use committed, in-tree private keys or certificates!
+# XXX Add hxtool command to generate a private key w/o generating a CSR
+# XXX Use hxtool to generate a fresh private key
+# XXX Use hxtool to generate self-signed CA certs
+# XXX Use PEM-FILE and store private key and certificate in same file
+# XXX Update krb5.conf.in to use ${objdir}-relative keys and certificates
+
+echo "Setting up certificates"
+${hxtool} request-create \
+	 --subject="CN=kdc,DC=test,DC=h5l,DC=se" \
+	 --key=FILE:${keyfile2} \
+	 req-kdc.der || exit 1
+${hxtool} request-create \
+	 --subject="CN=bar,DC=test,DC=h5l,DC=se" \
+	 --key=FILE:${keyfile2} \
+	 req-pkinit.der || exit 1
+${hxtool} request-create \
+	 --subject="CN=baz,DC=test,DC=h5l,DC=se" \
+	 --key=FILE:${keyfile2} \
+	 req-pkinit2.der || exit 1
+
+echo "issue self-signed ca cert"
+${hxtool} issue-certificate \
+	  --self-signed \
+	  --issue-ca \
+	  --ca-private-key=FILE:${keyfile} \
+          --subject="CN=CA,DC=test,DC=h5l,DC=se" \
+	  --certificate="FILE:ca.crt" || exit 1
+
+echo "issue kdc certificate"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-kdc" \
+          --pk-init-principal="krbtgt/TEST.H5L.SE@TEST.H5L.SE" \
+	  --req="PKCS10:req-kdc.der" \
+	  --certificate="FILE:kdc.crt" || exit 1
+
+echo "issue user certificate (pkinit san)"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+          --pk-init-principal="bar@TEST.H5L.SE" \
+	  --req="PKCS10:req-pkinit.der" \
+          --lifetime=7d \
+	  --certificate="FILE:pkinit.crt" || exit 1
+
+echo "issue user certificate (pkinit san; synthetic principal)"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+          --pk-init-principal="synthetized@TEST.H5L.SE" \
+	  --req="PKCS10:req-pkinit.der" \
+          --lifetime=7d \
+	  --certificate="FILE:pkinit-synthetic.crt" || exit 1
+
+echo "issue user 2 certificate (no san)"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+	  --req="PKCS10:req-pkinit2.der" \
+	  --certificate="FILE:pkinit2.crt" || exit 1
+
+echo "issue user 3 certificate (ms san)"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+          --ms-upn="bar@test.h5l.se" \
+	  --req="PKCS10:req-pkinit2.der" \
+	  --certificate="FILE:pkinit3.crt" || exit 1
+
+echo "issue user 3 certificate (ms san, baz2)"
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+          --ms-upn="baz2\\@test.h5l.se@${R}" \
+	  --req="PKCS10:req-pkinit2.der" \
+	  --certificate="FILE:pkinit4.crt" || exit 1
+
+echo "issue self-signed kx509 template cert"
+${hxtool} issue-certificate \
+	  --self-signed \
+	  --ca-private-key=FILE:${keyfile} \
+          --subject='CN=${principal-component0},DC=test,DC=h5l,DC=se' \
+	  --certificate="FILE:kx509-template.crt" || exit 1
+
+echo foo > ${objdir}/foopassword
+
+echo Starting kdc ; > messages.log
+KRB5_CONFIG="${objdir}/krb5-pkinit2.conf"
+${kdc} --detach --testing || { echo "kdc failed to start"; cat messages.log; exit 1; }
+kdcpid=`getpid kdc`
+
+trap 'kill -9 ${kdcpid}; echo signal killing kdc; cat ca.crt kdc.crt pkinit.crt pkinit-synthetic.crt; exit 1;' EXIT
+
+ec=0
+
+echo "Trying pk-init (principal in cert; longer max_life)"; > messages.log
+base="${objdir}"
+${kinit} --lifetime=5d -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${klist}
+if jq --version >/dev/null 2>&1 && jq -ne true >/dev/null 2>&1; then
+    ${klistjson} |
+        jq -e '(((.tickets[0].Expires|
+               strptime("%b %d %H:%M:%S %Y")|mktime) - now) / 86400) |
+               (floor < 4)' >/dev/null &&
+           { ec=1 ; eval "${testfailed}"; }
+fi
+${kdestroy}
+
+echo "Trying pk-init (principal in cert; synthetic)"; > messages.log
+base="${objdir}"
+${kinit} --lifetime=5d -C FILE:${base}/pkinit-synthetic.crt,${keyfile2} synthetized@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${klist}
+${kdestroy}
+
+echo "Restarting kdc ($kdcpid)"
+sh ${leaks_kill} kdc $kdcpid || ec=1
+KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
+${kdc} --detach --testing || { echo "kdc failed to start"; cat messages.log; exit 1; }
+kdcpid=`getpid kdc`
+
+echo "Trying pk-init (principal in cert)"; > messages.log
+base="${objdir}"
+${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${klist}
+if jq --version >/dev/null 2>&1 && jq -ne true >/dev/null 2>&1; then
+    ${klistjson} |
+        jq -e '(((.tickets[0].Expires|
+               strptime("%b %d %H:%M:%S %Y")|mktime) - now) / 86400) |
+               (floor > 1)' >/dev/null &&
+           { ec=1 ; eval "${testfailed}"; }
+fi
+${kdestroy}
+
+echo "Trying pk-init (principal in cert; longer max_life from cert ext)"; > messages.log
+# Re-issue cert with --pkinit-max-life=7d
+${hxtool} issue-certificate \
+	  --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
+	  --type="pkinit-client" \
+          --pk-init-principal="bar@TEST.H5L.SE" \
+	  --req="PKCS10:req-pkinit.der" \
+          --lifetime=7d \
+          --pkinit-max-life=7d \
+	  --certificate="FILE:pkinit.crt" || exit 1
+base="${objdir}"
+${kinit} --lifetime=5d -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${klist}
+if jq --version >/dev/null 2>&1 && jq -ne true >/dev/null 2>&1; then
+    ${klistjson} |
+        jq -e '(((.tickets[0].Expires|
+               strptime("%b %d %H:%M:%S %Y")|mktime) - now) / 86400) |
+               (floor < 4)' >/dev/null &&
+           { ec=1 ; eval "${testfailed}"; }
+fi
+
+echo "Check kx509 certificate acquisition"
+${kx509} -s || { ec=1 ; eval "${testfailed}"; }
+${kx509} -o PEM-FILE:${objdir}/kx509.pem || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Check PKINIT w/ kx509 certificate"
+${kinit} -C PEM-FILE:${objdir}/kx509.pem bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+
+echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
+${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (principal subject in DB)"; > messages.log
+${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (ms upn)"; > messages.log
+${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (ms upn, enterprise)"; > messages.log
+${kinit}  --canonicalize --enterprise \
+	-C FILE:${base}/pkinit4.crt,${keyfile2} baz2@test.h5l.se || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (ms upn, enterprise, pk-enterprise)"; > messages.log
+${kinit} --canonicalize \
+	--pk-enterprise \
+	-C FILE:${base}/pkinit4.crt,${keyfile2} ${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+KRB5_CONFIG="${objdir}/krb5-pkinit-win.conf"
+export KRB5_CONFIG
+
+echo "Duplicated tests, now in windows 2000 mode"
+
+echo "Trying pk-init (principal in cert)"; > messages.log
+base="${objdir}"
+${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
+${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (principal subject in DB)"; > messages.log
+${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+echo "Trying pk-init (ms upn)"; > messages.log
+${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+${kdestroy}
+
+
+KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
+export KRB5_CONFIG
+
+echo "Trying PKCS11 support"
+
+cat > test-rc-file.rc <<EOF
+certificate	cert	User certificate	FILE:${base}/pkinit.crt,${keyfile2}
+app-fatal	true
+EOF
+
+SOFTPKCS11RC="test-rc-file.rc"
+export SOFTPKCS11RC
+
+dir=${base}/../../lib/hx509
+file=
+
+for a in libhx509.so .libs/libhx509.so libhx509.dylib .libs/libhx509.dylib ; do
+    if [ -f $dir/$a ] ; then
+	file=$dir/$a
+	break
+    fi
+done
+
+if [ X"$file" != X -a @DLOPEN@ ] ; then
+
+    echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
+    ${kinit} -C PKCS11:${file} foo@${R} || \
+	{ ec=1 ; eval "${testfailed}"; }
+    ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
+    ${kdestroy}
+
+fi
+
+
+echo "killing kdc (${kdcpid})"
+sh ${leaks_kill} kdc $kdcpid || ec=1
+
+trap "" EXIT
+
+exit $ec