diff options
Diffstat (limited to 'source3/libsmb/passchange.c')
| -rw-r--r-- | source3/libsmb/passchange.c | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/source3/libsmb/passchange.c b/source3/libsmb/passchange.c new file mode 100644 index 0000000..b3304ed --- /dev/null +++ b/source3/libsmb/passchange.c @@ -0,0 +1,323 @@ +/* + Unix SMB/CIFS implementation. + SMB client password change routine + Copyright (C) Andrew Tridgell 1994-1998 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "includes.h" +#include "../librpc/gen_ndr/ndr_samr.h" +#include "rpc_client/cli_pipe.h" +#include "rpc_client/cli_samr.h" +#include "libsmb/libsmb.h" +#include "libsmb/clirap.h" +#include "libsmb/nmblib.h" +#include "../libcli/smb/smbXcli_base.h" + +/************************************************************* + Change a password on a remote machine using IPC calls. +*************************************************************/ + +NTSTATUS remote_password_change(const char *remote_machine, + const char *domain, const char *user_name, + const char *old_passwd, const char *new_passwd, + char **err_str) +{ + struct cli_state *cli = NULL; + struct cli_credentials *creds = NULL; + struct rpc_pipe_client *pipe_hnd = NULL; + NTSTATUS status; + NTSTATUS result; + bool pass_must_change = False; + + *err_str = NULL; + + result = cli_connect_nb(remote_machine, NULL, 0, 0x20, NULL, + SMB_SIGNING_IPC_DEFAULT, 0, &cli); + if (!NT_STATUS_IS_OK(result)) { + if (NT_STATUS_EQUAL(result, NT_STATUS_NOT_SUPPORTED)) { + if (asprintf(err_str, "Unable to connect to SMB server on " + "machine %s. NetBIOS support disabled\n", + remote_machine) == -1) { + *err_str = NULL; + } + } else { + if (asprintf(err_str, "Unable to connect to SMB server on " + "machine %s. Error was : %s.\n", + remote_machine, nt_errstr(result))==-1) { + *err_str = NULL; + } + } + return result; + } + + creds = cli_session_creds_init(cli, + user_name, + domain, + NULL, /* realm */ + old_passwd, + false, /* use_kerberos */ + false, /* fallback_after_kerberos */ + false, /* use_ccache */ + false); /* password_is_nt_hash */ + SMB_ASSERT(creds != NULL); + + result = smbXcli_negprot(cli->conn, + cli->timeout, + lp_client_ipc_min_protocol(), + lp_client_ipc_max_protocol(), + NULL, + NULL, + NULL); + + if (!NT_STATUS_IS_OK(result)) { + if (asprintf(err_str, "machine %s rejected the negotiate " + "protocol. Error was : %s.\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + + /* Given things like SMB signing, restrict anonymous and the like, + try an authenticated connection first */ + result = cli_session_setup_creds(cli, creds); + + if (!NT_STATUS_IS_OK(result)) { + + /* Password must change or Password expired are the only valid + * error conditions here from where we can proceed, the rest like + * account locked out or logon failure will lead to errors later + * anyway */ + + if (!NT_STATUS_EQUAL(result, NT_STATUS_PASSWORD_MUST_CHANGE) && + !NT_STATUS_EQUAL(result, NT_STATUS_PASSWORD_EXPIRED)) { + if (asprintf(err_str, "Could not connect to machine %s: " + "%s\n", remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + + pass_must_change = True; + + /* + * We should connect as the anonymous user here, in case + * the server has "must change password" checked... + * Thanks to <Nicholas.S.Jenkins@cdc.com> for this fix. + */ + + result = cli_session_setup_anon(cli); + + if (!NT_STATUS_IS_OK(result)) { + if (asprintf(err_str, "machine %s rejected the session " + "setup. Error was : %s.\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + } + + result = cli_tree_connect(cli, "IPC$", "IPC", NULL); + if (!NT_STATUS_IS_OK(result)) { + if (asprintf(err_str, "machine %s rejected the tconX on the " + "IPC$ share. Error was : %s.\n", + remote_machine, nt_errstr(result))) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + + /* Try not to give the password away too easily */ + + if (!pass_must_change) { + const struct sockaddr_storage *remote_sockaddr = + smbXcli_conn_remote_sockaddr(cli->conn); + + result = cli_rpc_pipe_open_with_creds(cli, + &ndr_table_samr, + NCACN_NP, + DCERPC_AUTH_TYPE_NTLMSSP, + DCERPC_AUTH_LEVEL_PRIVACY, + remote_machine, + remote_sockaddr, + creds, + &pipe_hnd); + } else { + /* + * If the user password must be changed the ntlmssp bind will + * fail the same way as the session setup above did. The + * difference is that with a pipe bind we don't get a good + * error message, the result will be that the rpc call below + * will just fail. So we do it anonymously, there's no other + * way. + */ + result = cli_rpc_pipe_open_noauth( + cli, &ndr_table_samr, &pipe_hnd); + } + + if (!NT_STATUS_IS_OK(result)) { + if (lp_client_lanman_auth()) { + /* Use the old RAP method. */ + if (!cli_oem_change_password(cli, user_name, new_passwd, old_passwd)) { + result = cli_nt_error(cli); + if (asprintf(err_str, "machine %s rejected the " + "password change: Error was : %s.\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + } else { + if (asprintf(err_str, "SAMR connection to machine %s " + "failed. Error was %s, but LANMAN password " + "changes are disabled\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + } + + status = dcerpc_samr_chgpasswd_user4(pipe_hnd->binding_handle, + talloc_tos(), + pipe_hnd->srv_name_slash, + user_name, + old_passwd, + new_passwd, + &result); + if (NT_STATUS_IS_OK(status) && NT_STATUS_IS_OK(result)) { + /* All good, password successfully changed. */ + cli_shutdown(cli); + return NT_STATUS_OK; + } + if (!NT_STATUS_IS_OK(status)) { + if (NT_STATUS_EQUAL(status, + NT_STATUS_RPC_PROCNUM_OUT_OF_RANGE) || + NT_STATUS_EQUAL(status, NT_STATUS_NOT_SUPPORTED) || + NT_STATUS_EQUAL(status, NT_STATUS_NOT_IMPLEMENTED)) { + /* DO NOT FALLBACK TO RC4 */ + if (lp_weak_crypto() == SAMBA_WEAK_CRYPTO_DISALLOWED) { + cli_shutdown(cli); + return NT_STATUS_STRONG_CRYPTO_NOT_SUPPORTED; + } + } + } else { + if (!NT_STATUS_IS_OK(result)) { + int rc = asprintf( + err_str, + "machine %s rejected to change the password" + "with error: %s", + remote_machine, + get_friendly_nt_error_msg(result)); + if (rc <= 0) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + } + + result = rpccli_samr_chgpasswd_user2(pipe_hnd, talloc_tos(), + user_name, new_passwd, old_passwd); + if (NT_STATUS_IS_OK(result)) { + /* Great - it all worked! */ + cli_shutdown(cli); + return NT_STATUS_OK; + + } else if (!(NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED) + || NT_STATUS_EQUAL(result, NT_STATUS_UNSUCCESSFUL))) { + /* it failed, but for reasons such as wrong password, too short etc ... */ + + if (asprintf(err_str, "machine %s rejected the password change: " + "Error was : %s.\n", + remote_machine, get_friendly_nt_error_msg(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + + /* OK, that failed, so try again... */ + TALLOC_FREE(pipe_hnd); + + /* Try anonymous NTLMSSP... */ + result = NT_STATUS_UNSUCCESSFUL; + + /* OK, this is ugly, but... try an anonymous pipe. */ + result = cli_rpc_pipe_open_noauth(cli, &ndr_table_samr, + &pipe_hnd); + + if ( NT_STATUS_IS_OK(result) && + (NT_STATUS_IS_OK(result = rpccli_samr_chgpasswd_user2( + pipe_hnd, talloc_tos(), user_name, + new_passwd, old_passwd)))) { + /* Great - it all worked! */ + cli_shutdown(cli); + return NT_STATUS_OK; + } else { + if (!(NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED) + || NT_STATUS_EQUAL(result, NT_STATUS_UNSUCCESSFUL))) { + /* it failed, but again it was due to things like new password too short */ + + if (asprintf(err_str, "machine %s rejected the " + "(anonymous) password change: Error was : " + "%s.\n", remote_machine, + get_friendly_nt_error_msg(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } + + /* We have failed to change the user's password, and we think the server + just might not support SAMR password changes, so fall back */ + + if (lp_client_lanman_auth()) { + /* Use the old RAP method. */ + if (cli_oem_change_password(cli, user_name, new_passwd, old_passwd)) { + /* SAMR failed, but the old LanMan protocol worked! */ + + cli_shutdown(cli); + return NT_STATUS_OK; + } + + result = cli_nt_error(cli); + if (asprintf(err_str, "machine %s rejected the password " + "change: Error was : %s.\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return result; + } else { + if (asprintf(err_str, "SAMR connection to machine %s " + "failed. Error was %s, but LANMAN password " + "changes are disabled\n", + remote_machine, nt_errstr(result)) == -1) { + *err_str = NULL; + } + cli_shutdown(cli); + return NT_STATUS_UNSUCCESSFUL; + } + } +} |