path: root/third_party/heimdal/tests/kdc/check-iprop.in

#!/bin/sh
#
# Copyright (c) 2006 - 2007 Kungliga Tekniska Högskolan
# (Royal Institute of Technology, Stockholm, Sweden). 
# All rights reserved. 
#
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions 
# are met: 
#
# 1. Redistributions of source code must retain the above copyright 
#    notice, this list of conditions and the following disclaimer. 
#
# 2. Redistributions in binary form must reproduce the above copyright 
#    notice, this list of conditions and the following disclaimer in the 
#    documentation and/or other materials provided with the distribution. 
#
# 3. Neither the name of the Institute nor the names of its contributors 
#    may be used to endorse or promote products derived from this software 
#    without specific prior written permission. 
#
# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
# SUCH DAMAGE. 

top_builddir="@top_builddir@"
env_setup="@env_setup@"
objdir="@objdir@"

db_type=@db_type@

. ${env_setup}

# If there is no useful db support compiled in, disable test
${have_db} || exit 77


# Don't run this test in AFS, since it lacks support for AF_UNIX
expr "X`/bin/pwd || pwd`" : "X/afs/.*" > /dev/null 2>/dev/null && exit 77

R=TEST.H5L.SE

port=@port@
ipropport=@ipropport@
ipropport2=@ipropport2@

cache="FILE:${objdir}/cache.krb5"
keytabfile=${objdir}/iprop.keytab
keytab="FILE:${keytabfile}"

kdc="${kdc} --addresses=localhost -P $port"
kadmin="${kadmin} -r $R"
kinit="${kinit} -c $cache ${afs_no_afslog}"

# We'll test iprop, and in particular, hierarchical iprop.  This means we'll
# have a setup like:
#
#  ipropd-master -> ipropd-slave -> 2nd ipropd-master -> 2nd ipropd-slave

# Waiting for incremental propagation is inherently difficult because we don't
# have a way for ipropd-slave to signal this script that it has received
# updates.  Well, it does have a way to signal a possible ipropd-master for
# hierarchical iprop, but we don't have a way to get that signal here.
#
# FIXME: Add a private interface for async waiting for iprop.
#
# What we do is we have a set of utility functions:
#
#  - get_iprop_ver   [N] -> checks that N (default to 1) ops have made it over
#  - get_iprop_ver2  [N] -> same, but for second ipropd-slave instance
#
#  - wait_for            -> repeat a command until it succeeds or too many tries
#  - wait_for_slave  [N] -> wait for N ops to make it over (calls get_iprop_ver)
#  - wait_for_slave2 [N] -> same, but for second ipropd-slave instance
#
# In particular the wait_for* functions busy-wait for a max amount of time,
# with sleeps in between.
#
# NOTE: get_iprop_ver and get_iprop_ver2 keep hidden state.
#
# When first called, get_iprop_ver / get_iprop_ver2 save the current version
# numbers.  Thereafter they check that N ops have been received.
#
# It is critical to account for every incremental op via get_iprop_ver /
# get_iprop_ver2, or wait_for_slave / wait_for_slave2, otherwise this test will
# be racy and will have spurious failures!
#
# The pattern should be something like this:
#
#   echo "Add host"
#   ${kadmin} -l add --random-key --use-defaults host/foo@${R} || exit 1
#   wait_for_slave
#   ^^^^^^^^^^^^^^
#      waits for 1 operation
#
# or
#
#   echo "Rollover host keys"
#   ${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
#   ${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
#   ${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
#   wait_for_slave 3
#   ^^^^^^^^^^^^^^^^
#      waits for the three operations
#
# So though all operations must be accounted for, they need not be accounted
# one by one.

slave_ver_from_master_old=
slave_ver_from_master_new=
slave_ver_old=
slave_ver_new=
get_iprop_ver () {
    min_change=${1:-1}
    slave_ver_from_master_new=`grep '^iprop/' iprop-stats | head -1 | awk '{print $3}'`
    slave_ver_new=`grep 'up-to-date with version:' iprop-slave-status | awk '{print $4}'`
    if [ -z "$slave_ver_from_master_new" -o -z "$slave_ver_new" ]; then
        return 1
    fi
    if [ x"$slave_ver_from_master_new" != x"$slave_ver_new" ]; then
        return 1
    fi
    if [ x"$slave_ver_from_master_old" != x ]; then
        change=`expr "$slave_ver_from_master_new" - "$slave_ver_from_master_old"`
        if [ "$change" -lt "$min_change" ]; then
            return 1
        fi
    fi
    slave_ver_from_master_old=$slave_ver_from_master_new
    slave_ver_old=$slave_ver_new
    return 0
}

slave_ver_from_master_old2=
slave_ver_from_master_new2=
slave_ver_old2=
slave_ver_new2=
get_iprop_ver2 () {
    min_change=${1:-1}
    slave_ver_from_master_new2=`grep '^iprop/' iprop-stats2 | head -1 | awk '{print $3}'`
    slave_ver_new2=`grep 'up-to-date with version:' iprop-slave-status2 | awk '{print $4}'`
    if [ -z "$slave_ver_from_master_new2" -o -z "$slave_ver_new2" ]; then
        return 1
    fi
    if [ x"$slave_ver_from_master_new2" != x"$slave_ver_new2" ]; then
        return 1
    fi
    if [ x"$slave_ver_from_master_old2" != x ]; then
        change=`expr "$slave_ver_from_master_new2" - "$slave_ver_from_master_old2"`
        if [ "$change" -lt "$min_change" ]; then
            return 1
        fi
    fi
    slave_ver_from_master_old2=$slave_ver_from_master_new2
    slave_ver_old2=$slave_ver_new2
    return 0
}

waitsec=65
sleeptime=2
wait_for () {
    msg=$1
    shift
    t=0
    while ! "$@"; do
        sleep $sleeptime;
        t=`expr $t + $sleeptime`
        if [ $t -gt $waitsec ]; then
            echo "Waited too long for $msg"
            exit 1
        fi
    done
    return 0
}

check_pidfile_is_dead () {
    if test ! -f lt-${1}.pid -a ! -f ${1}.pid; then
        return 0
    fi
    _pid=`cat lt-${1}.pid ${1}.pid 2>/dev/null`
    if [ -z "$_pid" ]; then
        return 0
    fi
    if kill -0 $_pid 2>/dev/null; then
        return 1
    fi
    return 0
}

wait_for_slave () {
    wait_for "iprop versions to change and/or slave to catch up" get_iprop_ver "$@"
}

wait_for_slave2 () {
    wait_for "iprop versions to change and/or second slave to catch up" get_iprop_ver2 "$@"
}

wait_for_master_down () {
    wait_for "master to exit" check_pidfile_is_dead ipropd-master
}

wait_for_slave_down () {
    wait_for "slave to exit" check_pidfile_is_dead ipropd-slave
}

KRB5_CONFIG="${objdir}/krb5.conf"
export KRB5_CONFIG

rm -f ${keytabfile}
rm -f current-db*
rm -f current*.log
rm -f out-*
rm -f mkey.file*
rm -f messages.log messages.log

> messages.log
> messages.log2

echo Creating database
${kadmin} -l \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R} || exit 1

${kadmin} -l add -p foo --use-defaults user@${R} || exit 1

${kadmin} -l add --random-key --use-defaults iprop/localhost@${R} || exit 1
${kadmin} -l ext -k ${keytab} iprop/localhost@${R} || exit 1
${kadmin} -l add --random-key --use-defaults iprop/slave.test.h5l.se@${R} || exit 1
${kadmin} -l ext -k ${keytab} iprop/slave.test.h5l.se@${R} || exit 1

echo foo > ${objdir}/foopassword

echo "Test log recovery"
${kadmin} -l add --random-key --use-defaults recovtest@${R} || exit 1
# Test theory: save the log, make a change and save the record it
# produced, restore the log, append to it the saved record, then add dummy
# record.

# Save the log
cp current.log current.log.tmp
ls -l current.log.tmp | awk '{print $5}' > tmp
read sz < tmp
# Make a change
${kadmin} -l mod -a requires-pre-auth recovtest@${R} || exit 1
${kadmin} -l get recovtest@${R} | grep 'Attributes: requires-pre-auth$' > /dev/null || exit 1
# Save the resulting log record
ls -l current.log | awk '{print $5}' > tmp
read nsz < tmp
rm tmp
dd bs=1 if=current.log skip=$sz of=current.log.tmp.saved-record count=`expr $nsz - $sz` 2>/dev/null
# Undo the change
${kadmin} -l mod -a -requires-pre-auth recovtest@${R} || exit 1
${kadmin} -l get recovtest@${R} | grep 'Attributes:.$' > /dev/null || exit 1
# Restore the log
cp current.log current.log.save
mv current.log.tmp current.log
# Append the saved record
cat current.log.tmp.saved-record >> current.log
rm current.log.tmp.saved-record
# Check that we still see the principal as modified after another write forcing
# log recovery.
${kadmin} -l add --random-key --use-defaults dummy@${R} || exit 1
${kadmin} -l del dummy@${R} || exit 1
${kadmin} -l get recovtest@${R} | grep 'Attributes: requires-pre-auth$' > /dev/null || exit 1

# -- foo
ipds=
ipdm=
kdcpid=

> iprop-stats
> iprop-stats2
rm -f iprop-slave-status iprop-slave-status2

ipropd_slave2=$ipropd_slave
ipropd_master2=$ipropd_master
ipropd_slave="${ipropd_slave} --status-file=iprop-slave-status --port=$ipropport"
ipropd_slave="${ipropd_slave} --hostname=slave.test.h5l.se -k ${keytab}"
ipropd_slave="${ipropd_slave} --detach localhost"
ipropd_master="${ipropd_master} --hostname=localhost -k ${keytab}"
ipropd_master="${ipropd_master} --port=$ipropport"
ipropd_master="${ipropd_master} --database=${objdir}/current-db --detach"

ipropd_slave2="${ipropd_slave2} --status-file=iprop-slave-status2 --port=$ipropport2"
ipropd_slave2="${ipropd_slave2} --hostname=slave.test.h5l.se -k ${keytab}"
ipropd_slave2="${ipropd_slave2} --pidfile-basename=ipropd-slave2"
ipropd_slave2="${ipropd_slave2} --detach localhost"
ipropd_master2="${ipropd_master2} --hostname=localhost -k ${keytab}"
ipropd_master2="${ipropd_master2} --port=$ipropport2"
ipropd_master2="${ipropd_master2} --pidfile-basename=ipropd-master2"
ipropd_master2="${ipropd_master2} --database=${objdir}/current-db.slave --detach"

cleanup() {
    echo 'killing ipropd s + m + kdc'
    test -n "$ipdm" && kill -9 $ipdm        >/dev/null 2>/dev/null
    test -n "$ipdm2" && kill -9 $ipdm2      >/dev/null 2>/dev/null
    test -n "$ipds" && kill -9 $ipds        >/dev/null 2>/dev/null
    test -n "$ipds2" && kill -9 $ipds2      >/dev/null 2>/dev/null
    test -n "$kdcpid" && kill -9 $kdcpid    >/dev/null 2>/dev/null
    tail messages.log
    tail iprop-stats
    exit 1
}
trap cleanup EXIT

echo Starting kdc ; > messages.log
${kdc} --detach --testing || { echo "kdc failed to start"; cat messages.log; exit 1; }
kdcpid=`getpid kdc`

echo "starting master" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
${ipropd_master} || { echo "ipropd-master failed to start"; exit 1; }
ipdm=`getpid ipropd-master`

echo "starting slave" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${ipropd_slave} || { echo "ipropd-slave failed to start"; exit 1; }
ipds=`getpid ipropd-slave`
sh ${wait_kdc} ipropd-slave messages.log 'slave status change: up-to-date' || exit 1
get_iprop_ver || exit 1

echo "checking slave is up"
${EGREP} 'iprop/slave.test.h5l.se@TEST.H5L.SE.*Up' iprop-stats >/dev/null || exit 1
${EGREP} 'up-to-date with version' iprop-slave-status >/dev/null || { echo "slave to up to date" ; cat iprop-slave-status ; exit 1; }

# Also setup a second master on the slave, then a second slave to pull from the
# second master.
echo "starting master2" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-master2.conf" \
${ipropd_master2} || { echo "second ipropd-master failed to start"; exit 1; }
ipdm2=`getpid ipropd-master2`

echo "starting slave2" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-slave2.conf" \
${ipropd_slave2} || { echo "ipropd-slave failed to start"; exit 1; }
ipds2=`getpid ipropd-slave2`
sh ${wait_kdc} ipropd-slave messages2.log 'slave status change: up-to-date' || exit 1
wait_for "Slave sees new host" get_iprop_ver2 0 || exit 1

# ----------------- checking: pushing lives changes

slave_get() { KRB5_CONFIG="${objdir}/krb5-slave.conf" ${kadmin} -l get "$@"; }
slave_check_exists() {
    # Creation with a random key is not atomic, there are at present
    # 3 log entries to create a random key principal, the entry is
    # "invalid" for the first two of these.  We wait for the entry to
    # exist and not be invalid
    #
    attrs=`slave_get -o attributes "$@" 2>/dev/null` || return 1
    echo $attrs | egrep 'Attributes:' | egrep -v invalid >/dev/null || return 1
    get_iprop_ver 0
}

echo "Add host"
${kadmin} -l add --random-key --use-defaults host/foo@${R} || exit 1
wait_for_slave
wait_for "Slave sees new host" slave_check_exists "host/foo@${R}"

echo "Rollover host keys"
${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
${kadmin} -l cpw -r --keepold host/foo@${R} || exit 1
wait_for_slave 3
slave_get host/foo@${R} | \
    ${EGREP} Keytypes: | cut -d: -f2 | tr ' ' '
' | sed 's/^.*[[]\(.*\)[]].*$/\1/' | grep '[0-9]' | sort -nu | tr -d '
' | ${EGREP} 1234 > /dev/null || exit 1

wait_for_slave2 4

echo "Delete 3DES keys"
${kadmin} -l del_enctype host/foo@${R} des3-cbc-sha1
wait_for_slave
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/foo@${R} | \
    ${EGREP} Keytypes: | cut -d: -f2 | tr ' ' '
' | sed 's/^.*[[]\(.*\)[]].*$/\1/' | grep '[0-9]' | sort -nu | tr -d '
' | ${EGREP} 1234 > /dev/null || exit 1
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/foo@${R} | \
    ${EGREP} 'Keytypes:.*des3-cbc-sha1' > /dev/null && exit 1

echo "Change policy host"
${kadmin} -l modify --policy=default host/foo@${R} || exit 1
wait_for_slave
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/foo@${R} > /dev/null 2>/dev/null || exit 1

echo "Rename host"
${kadmin} -l rename host/foo@${R} host/bar@${R} || exit 1
wait_for_slave
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/foo@${R} > /dev/null 2>/dev/null && exit 1
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/bar@${R} > /dev/null || exit 1

wait_for_slave2 3

echo "Delete host"
${kadmin} -l delete host/bar@${R} || exit 1
wait_for_slave
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${kadmin} -l get host/bar@${R} > /dev/null 2>/dev/null && exit 1

# See note below in LMDB sanity checking
echo "Re-add host"
${kadmin} -l add --random-key --use-defaults host/foo@${R} || exit 1
${kadmin} -l add --random-key --use-defaults host/bar@${R} || exit 1
wait_for_slave 2
wait_for "Slave sees re-added host" slave_check_exists "host/bar@${R}"

wait_for_slave2 3

echo "kill slave and remove log and database"
> iprop-stats
sh ${leaks_kill} ipropd-slave $ipds || exit 1
rm -f iprop-slave-status

wait_for_slave_down
${EGREP} 'iprop/slave.test.h5l.se@TEST.H5L.SE.*Down' iprop-stats >/dev/null || exit 1

# ----------------- checking: slave is missing changes while down

rm current.slave.log current-db.slave* || exit 1

echo "doing changes while slave is down"
${kadmin} -l cpw --random-password user@${R} > /dev/null || exit 1
${kadmin} -l cpw --random-password user@${R} > /dev/null || exit 1

echo "Making a copy of the master log file"
cp ${objdir}/current.log ${objdir}/current.log.tmp

# ----------------- checking: checking that master and slaves resyncs

echo "starting slave again" ; > messages.log
> iprop-stats
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${ipropd_slave} || { echo "ipropd-slave failed to start"; exit 1; }
ipds=`getpid ipropd-slave`

echo "checking slave is up again"
wait_for "slave to start and connect to master" \
    ${EGREP} 'iprop/slave.test.h5l.se@TEST.H5L.SE.*Up' iprop-stats >/dev/null
wait_for_slave 2
wait_for_slave2 2
${EGREP} 'up-to-date with version' iprop-slave-status >/dev/null || { echo "slave not up to date" ; cat iprop-slave-status ; exit 1; }
echo "checking for replay problems"
${EGREP} 'Entry already exists in database' messages.log && exit 1

echo "compare versions on master and slave logs (no lock)"
KRB5_CONFIG=${objdir}/krb5-slave.conf \
${iprop_log} last-version -n > slave-last.tmp
${iprop_log} last-version -n > master-last.tmp
cmp master-last.tmp slave-last.tmp || exit 1

echo "kill slave and remove log and database"
sh ${leaks_kill} ipropd-slave $ipds || exit 1
wait_for_slave_down

rm current.slave.log current-db.slave* || exit 1
> iprop-stats
rm -f iprop-slave-status
echo "starting slave" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${ipropd_slave} || { echo "ipropd-slave failed to start"; exit 1; }
ipds=`getpid ipropd-slave`
wait_for_slave 0

echo "checking slave is up again"
wait_for "slave to start and connect to master" \
    ${EGREP} 'iprop/slave.test.h5l.se@TEST.H5L.SE.*Up' iprop-stats >/dev/null
${EGREP} 'up-to-date with version' iprop-slave-status >/dev/null || { echo "slave not up to date" ; cat iprop-slave-status ; exit 1; }
echo "checking for replay problems"
${EGREP} 'Entry already exists in database' messages.log && exit 1

# ----------------- checking: checking live truncation of master log

${kadmin} -l cpw --random-password user@${R} > /dev/null || exit 1
wait_for_slave
wait_for_slave2

echo "live truncate on master log"
${iprop_log} truncate -K 5 || exit 1
wait_for_slave 0

echo "Killing master and slave"
sh ${leaks_kill} ipropd-master $ipdm || exit 1
sh ${leaks_kill} ipropd-slave $ipds || exit 1

rm -f iprop-slave-status

wait_for_slave_down
wait_for_master_down

echo "compare versions on master and slave logs"
KRB5_CONFIG=${objdir}/krb5-slave.conf \
${iprop_log} last-version > slave-last.tmp
${iprop_log} last-version > master-last.tmp
cmp master-last.tmp slave-last.tmp || exit 1

# ----------------- checking: master going backward
> iprop-stats
> messages.log

echo "Going back to old version of the master log file"
cp ${objdir}/current.log.tmp ${objdir}/current.log

echo "starting master"  ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
${ipropd_master} || { echo "ipropd-master failed to start"; exit 1; }
ipdm=`getpid ipropd-master`

echo "starting slave" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
KRB5_CONFIG="${objdir}/krb5-slave.conf" \
${ipropd_slave} || { echo "ipropd-slave failed to start"; exit 1; }
ipds=`getpid ipropd-slave`
wait_for_slave -1

echo "checking slave is up again"
wait_for "slave to start and connect to master" \
    ${EGREP} 'iprop/slave.test.h5l.se@TEST.H5L.SE.*Up' iprop-stats >/dev/null
${EGREP} 'up-to-date with version' iprop-slave-status >/dev/null || { echo "slave to up to date" ; cat iprop-slave-status ; exit 1; }
echo "checking for replay problems"
${EGREP} 'Entry already exists in database' messages.log && exit 1

echo "pushing one change"
${kadmin} -l cpw --random-password user@${R} > /dev/null || exit 1
wait_for_slave
wait_for_slave2 0

echo "Killing master"
sh ${leaks_kill} ipropd-master $ipdm || exit 1

wait_for_master_down

wait_for "slave to disconnect" \
  ${EGREP} 'disconnected' iprop-slave-status >/dev/null

if ! tail -30 messages.log | grep 'disconnected for server' > /dev/null; then
    echo "client didnt disconnect"
    exit 1
fi

echo "probing for slave pid"
kill -0 ${ipds}  || { echo "slave no longer there"; exit 1; }

> messages.log

echo "Staring master again" ; > messages.log
env ${HEIM_MALLOC_DEBUG} \
${ipropd_master} || { echo "ipropd-master failed to start"; exit 1; }
ipdm=`getpid ipropd-master`

echo "probing for slave pid"
kill -0 ${ipds}  || { echo "slave no longer there"; exit 1; }


echo "pushing one change"
${kadmin} -l cpw --random-password user@${R} > /dev/null || exit 1
wait_for_slave
wait_for_slave2

echo "shutting down all services"

leaked=false
sh ${leaks_kill} kdc $kdcpid || leaked=true
sh ${leaks_kill} ipropd-master $ipdm || leaked=true
sh ${leaks_kill} ipropd-slave $ipds || leaked=true
sh ${leaks_kill} ipropd-master $ipdm2 || leaked=true
sh ${leaks_kill} ipropd-slave $ipds2 || leaked=true
rm -f iprop-slave-status
trap "" EXIT
$leaked && exit 1

echo "compare versions on master and slave logs"
KRB5_CONFIG=${objdir}/krb5-slave.conf \
${iprop_log} last-version > slave-last.tmp
${iprop_log} last-version > master-last.tmp
cmp master-last.tmp slave-last.tmp || exit 1

if [ "$db_type" = lmdb ] && type mdb_stat > /dev/null 2>&1; then
    # Sanity check that we have the same number of principals at the HDB
    # and LMDB levels.
    #
    # We should also do this for the sqlite backend, but that would
    # require a sqlite3(1) shell that is capable of opening our HDB
    # files.
    echo "checking that principals in DB == entries in LMDB"
    # Add one to match lmdb overhead
    princs=`(echo; ${kadmin} -l list '*') | wc -l`
    entries=`mdb_stat -n current-db.mdb | grep 'Entries:' | awk '{print $2}'`
    [ "$princs" -eq "$entries" ] || exit 1
fi

exit 0