diff options
Diffstat (limited to 'tests/tests/grouptools/groupadd')
234 files changed, 10305 insertions, 0 deletions
diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config.txt b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/default/useradd b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/group b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/gshadow b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/login.defs b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/passwd b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/shadow b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/group b/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/group new file mode 100644 index 0000000..6307e25 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:103: diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/gshadow b/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/tests/grouptools/groupadd/01_groupadd_add_group/groupadd.test b/tests/tests/grouptools/groupadd/01_groupadd_add_group/groupadd.test new file mode 100755 index 0000000..c48da8e --- /dev/null +++ b/tests/tests/grouptools/groupadd/01_groupadd_add_group/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group (GID_MIN set to 100 in /etc/login.defs)" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd foo)..." +groupadd foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config.txt b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/default/useradd b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/group b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/gshadow b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/login.defs b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/login.defs new file mode 100644 index 0000000..923caa6 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 1000 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/passwd b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/shadow b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/group b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/group new file mode 100644 index 0000000..fecba0c --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1000: diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/gshadow b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/groupadd.test b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/groupadd.test new file mode 100755 index 0000000..05c1038 --- /dev/null +++ b/tests/tests/grouptools/groupadd/02_groupadd_add_group_GID_MIN/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group (GID_MIN set to 1000 in /etc/login.defs)" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd foo)..." +groupadd foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config.txt b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/default/useradd b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/group b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/gshadow b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/login.defs b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/passwd b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/shadow b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/group b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/group new file mode 100644 index 0000000..f3d8204 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:2000: diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/gshadow b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/groupadd.test b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/groupadd.test new file mode 100755 index 0000000..bad185a --- /dev/null +++ b/tests/tests/grouptools/groupadd/03_groupadd_add_group_-K_GID_MIN/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group, respect -K GID_MIN" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd -K GID_MIN=2000 foo)..." +groupadd -K GID_MIN=2000 foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config.txt b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/default/useradd b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/group b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/gshadow b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/login.defs b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/passwd b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/shadow b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/group b/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/group new file mode 100644 index 0000000..6307e25 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:103: diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/gshadow b/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/gshadow new file mode 100644 index 0000000..57a72a7 --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:password:: diff --git a/tests/tests/grouptools/groupadd/04_groupadd_set_password/groupadd.test b/tests/tests/grouptools/groupadd/04_groupadd_set_password/groupadd.test new file mode 100755 index 0000000..01ce95e --- /dev/null +++ b/tests/tests/grouptools/groupadd/04_groupadd_set_password/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group and set the password" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo with a password (groupadd -p password foo)..." +groupadd -p password foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/group b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/group new file mode 100644 index 0000000..3bd92e7 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1500: diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test new file mode 100755 index 0000000..306767b --- /dev/null +++ b/tests/tests/grouptools/groupadd/05_groupadd_set_GID/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group and set the GID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo with GID 1500 (groupadd -p 1500 foo)..." +groupadd -g 1500 foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config.txt b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/default/useradd b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/group b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/group new file mode 100644 index 0000000..6307e25 --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:103: diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/gshadow b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/login.defs b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/passwd b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/shadow b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/groupadd.test b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/groupadd.test new file mode 100755 index 0000000..25546eb --- /dev/null +++ b/tests/tests/grouptools/groupadd/06_groupadd_-f_add_existing_group/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd -f exits with succes if the user already exists" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd -f foo)..." +groupadd -f foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config.txt b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/group b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/group new file mode 100644 index 0000000..5c3fef9 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1003: diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/login.defs b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/group b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/group new file mode 100644 index 0000000..66c892a --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/group @@ -0,0 +1,43 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1003: +bar:x:1004: diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/gshadow b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/gshadow new file mode 100644 index 0000000..e718821 --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/data/gshadow @@ -0,0 +1,43 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: +bar:!:: diff --git a/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/groupadd.test b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/groupadd.test new file mode 100755 index 0000000..3f3f32f --- /dev/null +++ b/tests/tests/grouptools/groupadd/07_groupadd_-f_add_existing_GID/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd -f uses another GID if an user already exists with this GID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group bar, GID 1003 (groupadd -g 1003 -f bar)..." +groupadd -g 1003 -f bar +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config.txt b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/default/useradd b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/group b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/gshadow b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/passwd b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/shadow b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/data/groupadd.err b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/data/groupadd.err new file mode 100644 index 0000000..33604e5 --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/data/groupadd.err @@ -0,0 +1,2 @@ +groupadd: existing lock file /etc/group.lock without a PID +groupadd: cannot lock /etc/group; try again later. diff --git a/tests/tests/grouptools/groupadd/08_groupadd_locked_group/groupadd.test b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/groupadd.test new file mode 100755 index 0000000..aa3250e --- /dev/null +++ b/tests/tests/grouptools/groupadd/08_groupadd_locked_group/groupadd.test @@ -0,0 +1,60 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the group file is locked" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config; rm -f /etc/group.lock' 0 + +change_config + +echo -n "Create lock file for /etc/group..." +touch /etc/group.lock +echo "done" + +echo -n "Add group foo (groupadd foo)..." +groupadd foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +rm -f /etc/group.lock + +echo -n "Check returned status ($status)..." +test "$status" = "10" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config.txt b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/default/useradd b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/group b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/gshadow b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/passwd b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/shadow b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/data/groupadd.err b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/data/groupadd.err new file mode 100644 index 0000000..c64e0a9 --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/data/groupadd.err @@ -0,0 +1,2 @@ +groupadd: existing lock file /etc/gshadow.lock without a PID +groupadd: cannot lock /etc/gshadow; try again later. diff --git a/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/groupadd.test b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/groupadd.test new file mode 100755 index 0000000..ac6645c --- /dev/null +++ b/tests/tests/grouptools/groupadd/09_groupadd_locked_gshadow/groupadd.test @@ -0,0 +1,60 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the gshadow file is locked" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config; rm -f /etc/gshadow.lock' 0 + +change_config + +echo -n "Create lock file for /etc/gshadow..." +touch /etc/gshadow.lock +echo "done" + +echo -n "Add group foo (groupadd foo)..." +groupadd foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +rm -f /etc/gshadow.lock + +echo -n "Check returned status ($status)..." +test "$status" = "10" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config.txt b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/group b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/group new file mode 100644 index 0000000..5c3fef9 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1003: diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/login.defs b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/group b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/group new file mode 100644 index 0000000..64cb8f1 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/group @@ -0,0 +1,43 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1003: +bar:x:1003: diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/gshadow b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/gshadow new file mode 100644 index 0000000..e718821 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/data/gshadow @@ -0,0 +1,43 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: +bar:!:: diff --git a/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/groupadd.test b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/groupadd.test new file mode 100755 index 0000000..3597a31 --- /dev/null +++ b/tests/tests/grouptools/groupadd/10_groupadd_-o_add_existing_GID/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd -o accepts to add a group with an already used GID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group bar, GID 1003 (groupadd -g 1003 -o bar)..." +groupadd -g 1003 -o bar +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config.txt b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/group b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/data/groupadd.err b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/data/groupadd.err new file mode 100644 index 0000000..1b0872b --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/data/groupadd.err @@ -0,0 +1 @@ +groupadd: invalid group ID '1002a' diff --git a/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/groupadd.test b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/groupadd.test new file mode 100755 index 0000000..9a1d542 --- /dev/null +++ b/tests/tests/grouptools/groupadd/11_groupadd_invalid_GID/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the given GID is a valid numeric ID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID 1002a (groupadd -g 1002a foo)..." +groupadd -g 1002a foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config.txt b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/group b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/data/groupadd.err b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/data/groupadd.err new file mode 100644 index 0000000..26012b6 --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/data/groupadd.err @@ -0,0 +1 @@ +groupadd: invalid group ID '-1002' diff --git a/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/groupadd.test b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/groupadd.test new file mode 100755 index 0000000..b46434c --- /dev/null +++ b/tests/tests/grouptools/groupadd/12_groupadd_negative_GID/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the given GID is a valid numeric ID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID -1002 (groupadd -g -1002 foo)..." +groupadd -g -1002 foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config.txt b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/default/useradd b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/group b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/gshadow b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/passwd b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/shadow b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/data/groupadd.err b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/data/groupadd.err new file mode 100644 index 0000000..e7ca762 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/data/groupadd.err @@ -0,0 +1 @@ +groupadd: 'foo:bar' is not a valid group name diff --git a/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/groupadd.test b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/groupadd.test new file mode 100755 index 0000000..fab3011 --- /dev/null +++ b/tests/tests/grouptools/groupadd/13_groupadd_invalid_name/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the given name is valid" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo:bar (groupadd foo:bar)..." +groupadd foo:bar 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config.txt b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/default/useradd b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/group b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/gshadow b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/passwd b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/shadow b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/data/groupadd.err b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/data/groupadd.err new file mode 100644 index 0000000..f2685c5 --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/data/groupadd.err @@ -0,0 +1 @@ +configuration error - unknown item 'FOO' (notify administrator) diff --git a/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/groupadd.test b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/groupadd.test new file mode 100755 index 0000000..7e28a7f --- /dev/null +++ b/tests/tests/grouptools/groupadd/14_groupadd_invalid_-K_option/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the option provided with -K is valid" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group -K FOO=100 foo (groupadd -K FOO=100 foo)..." +groupadd -K FOO=100 foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config.txt b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/default/useradd b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/group b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/gshadow b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/passwd b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/shadow b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/data/groupadd.err b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/data/groupadd.err new file mode 100644 index 0000000..8661719 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/data/groupadd.err @@ -0,0 +1 @@ +groupadd: -K requires KEY=VALUE diff --git a/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/groupadd.test b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/groupadd.test new file mode 100755 index 0000000..affd681 --- /dev/null +++ b/tests/tests/grouptools/groupadd/15_groupadd_invalid_-K_no_=/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the option provided with -K has a value" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group -K GID_MAX foo (groupadd -K GID_MAX foo)..." +groupadd -K GID_MAX foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config.txt b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/default/useradd b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/group b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/group new file mode 100644 index 0000000..6307e25 --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:103: diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/gshadow b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/passwd b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/shadow b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/data/groupadd.err b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/data/groupadd.err new file mode 100644 index 0000000..be5ec5f --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/data/groupadd.err @@ -0,0 +1 @@ +groupadd: group 'foo' already exists diff --git a/tests/tests/grouptools/groupadd/16_groupadd_existing_group/groupadd.test b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/groupadd.test new file mode 100755 index 0000000..7136dfa --- /dev/null +++ b/tests/tests/grouptools/groupadd/16_groupadd_existing_group/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the group already exists" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd foo)..." +groupadd foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "9" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config.txt b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/default/useradd b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/group b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/gshadow b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/login.defs b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/login.defs new file mode 100644 index 0000000..6080471 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/login.defs @@ -0,0 +1,315 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +SYS_GID_MIN 500 +GID_MIN 1000 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/passwd b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/shadow b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/group b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/group new file mode 100644 index 0000000..b5b6ce2 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:999: diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/gshadow b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/gshadow new file mode 100644 index 0000000..bfc0675 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/data/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:!:: diff --git a/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/groupadd.test b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/groupadd.test new file mode 100755 index 0000000..1d5c9a8 --- /dev/null +++ b/tests/tests/grouptools/groupadd/17_groupadd_add_systemgroup/groupadd.test @@ -0,0 +1,39 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a system group (GID_MIN set to 1000, and SYS_GID_MIN set to 500 in /etc/login.defs)" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add system group foo (groupadd --system foo)..." +groupadd --system foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl data/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config.txt b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/group b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/group new file mode 100644 index 0000000..15f4c27 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/group @@ -0,0 +1,43 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo1:x:1000: +foo2:x:1001: diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/login.defs b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/login.defs new file mode 100644 index 0000000..9b1a3c4 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 1000 +GID_MAX 1001 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/data/groupadd.err b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/data/groupadd.err new file mode 100644 index 0000000..b3fd5c1 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/data/groupadd.err @@ -0,0 +1 @@ +groupadd: Can't get unique GID (no more available GIDs) diff --git a/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/groupadd.test b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/groupadd.test new file mode 100755 index 0000000..d4aeec4 --- /dev/null +++ b/tests/tests/grouptools/groupadd/18_groupadd_no_more_GID/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the a GID is still available (GID_MIN=1000, GID_MAX=1001)" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo (groupadd foo)..." +groupadd foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "4" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config.txt b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/group b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/group new file mode 100644 index 0000000..db0f483 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/group @@ -0,0 +1,43 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo1:x:300: +foo2:x:301: diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/login.defs b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/login.defs new file mode 100644 index 0000000..7c33f41 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/login.defs @@ -0,0 +1,316 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +SYS_GID_MIN 300 +SYS_GID_MAX 301 +GID_MIN 1000 +GID_MAX 1001 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/data/groupadd.err b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/data/groupadd.err new file mode 100644 index 0000000..2809cdd --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/data/groupadd.err @@ -0,0 +1 @@ +groupadd: Can't get unique system GID (no more available GIDs) diff --git a/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/groupadd.test b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/groupadd.test new file mode 100755 index 0000000..728cdbc --- /dev/null +++ b/tests/tests/grouptools/groupadd/19_groupadd_-r_no_more_system_GID/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the a GID is still available (GID_MIN=300, GID_MAX=301)" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add system group foo (groupadd -r foo)..." +groupadd -r foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "4" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config.txt b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/default/useradd b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/group b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/group new file mode 100644 index 0000000..fecba0c --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:1000: diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/gshadow b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/gshadow new file mode 100644 index 0000000..5042e58 --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/gshadow @@ -0,0 +1,42 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: +foo:*:: diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/passwd b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/shadow b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/data/groupadd.err b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/data/groupadd.err new file mode 100644 index 0000000..2ab5ee7 --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/data/groupadd.err @@ -0,0 +1 @@ +groupadd: GID '1000' already exists diff --git a/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/groupadd.test b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/groupadd.test new file mode 100755 index 0000000..c65be1b --- /dev/null +++ b/tests/tests/grouptools/groupadd/20_groupadd_add_existing_GID/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the given GID is already used" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group bar, GID 1000 (groupadd -g 1000 bar)..." +groupadd -g 1000 bar 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "4" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config.txt b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/default/useradd b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/group b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/gshadow b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/passwd b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/shadow b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/data/groupadd.err b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/data/groupadd.err new file mode 100644 index 0000000..686e195 --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/data/groupadd.err @@ -0,0 +1 @@ +groupadd: invalid group ID '4294967295' diff --git a/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/groupadd.test b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/groupadd.test new file mode 100755 index 0000000..ce73d7f --- /dev/null +++ b/tests/tests/grouptools/groupadd/21_groupadd_invalid_GID_4294967295/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd checks if the given GID is a valid numeric ID" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID 4294967295 (groupadd -g 4294967295 foo)..." +groupadd -g 4294967295 foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "3" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config.txt b/tests/tests/grouptools/groupadd/22_groupadd_usage/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/default/useradd b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/group b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/gshadow b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/passwd b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/shadow b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/data/usage.out b/tests/tests/grouptools/groupadd/22_groupadd_usage/data/usage.out new file mode 100644 index 0000000..bb5b556 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/data/usage.out @@ -0,0 +1,14 @@ +Usage: groupadd [options] GROUP + +Options: + -f, --force exit successfully if the group already exists, + and cancel -g if the GID is already used + -g, --gid GID use GID for the new group + -h, --help display this help message and exit + -K, --key KEY=VALUE override /etc/login.defs defaults + -o, --non-unique allow to create groups with duplicate + (non-unique) GID + -p, --password PASSWORD use this encrypted password for the new group + -r, --system create a system account + -R, --root CHROOT_DIR directory to chroot into + diff --git a/tests/tests/grouptools/groupadd/22_groupadd_usage/groupadd.test b/tests/tests/grouptools/groupadd/22_groupadd_usage/groupadd.test new file mode 100755 index 0000000..e273408 --- /dev/null +++ b/tests/tests/grouptools/groupadd/22_groupadd_usage/groupadd.test @@ -0,0 +1,49 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can display its usage message" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Get groupadd usage (groupadd -h)..." +groupadd -h >tmp/usage.out + +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/usage.out +echo "=======================================================================" +echo -n "Check the usage message..." +diff -au data/usage.out tmp/usage.out +echo "usage message OK." +rm -f tmp/usage.out + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config.txt b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/default/useradd b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/group b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/gshadow b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/passwd b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/shadow b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/data/groupadd.err b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/data/groupadd.err new file mode 100644 index 0000000..bb5b556 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/data/groupadd.err @@ -0,0 +1,14 @@ +Usage: groupadd [options] GROUP + +Options: + -f, --force exit successfully if the group already exists, + and cancel -g if the GID is already used + -g, --gid GID use GID for the new group + -h, --help display this help message and exit + -K, --key KEY=VALUE override /etc/login.defs defaults + -o, --non-unique allow to create groups with duplicate + (non-unique) GID + -p, --password PASSWORD use this encrypted password for the new group + -r, --system create a system account + -R, --root CHROOT_DIR directory to chroot into + diff --git a/tests/tests/grouptools/groupadd/23_groupadd_no_groups/groupadd.test b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/groupadd.test new file mode 100755 index 0000000..bb38d63 --- /dev/null +++ b/tests/tests/grouptools/groupadd/23_groupadd_no_groups/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd requires the group to create" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID 4294967295 (groupadd -g 4294967295 foo)..." +groupadd 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "2" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config.txt b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/default/useradd b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/group b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/gshadow b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/passwd b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/shadow b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/data/groupadd.err b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/data/groupadd.err new file mode 100644 index 0000000..bb5b556 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/data/groupadd.err @@ -0,0 +1,14 @@ +Usage: groupadd [options] GROUP + +Options: + -f, --force exit successfully if the group already exists, + and cancel -g if the GID is already used + -g, --gid GID use GID for the new group + -h, --help display this help message and exit + -K, --key KEY=VALUE override /etc/login.defs defaults + -o, --non-unique allow to create groups with duplicate + (non-unique) GID + -p, --password PASSWORD use this encrypted password for the new group + -r, --system create a system account + -R, --root CHROOT_DIR directory to chroot into + diff --git a/tests/tests/grouptools/groupadd/24_groupadd_2_groups/groupadd.test b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/groupadd.test new file mode 100755 index 0000000..0f12ae2 --- /dev/null +++ b/tests/tests/grouptools/groupadd/24_groupadd_2_groups/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can only create a single group" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID 4294967295 (groupadd -g 4294967295 foo)..." +groupadd group1 group2 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "2" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config.txt b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config.txt new file mode 100644 index 0000000..3d43135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config.txt @@ -0,0 +1,5 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/default/useradd b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/group b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/gshadow b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/login.defs b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/login.defs new file mode 100644 index 0000000..cf181ac --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/login.defs @@ -0,0 +1,314 @@ +# +# /etc/login.defs - Configuration control definitions for the login package. +# +# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. +# If unspecified, some arbitrary (and possibly incorrect) value will +# be assumed. All other items are optional - if not specified then +# the described action or option will be inhibited. +# +# Comment lines (lines beginning with "#") and blank lines are ignored. +# +# Modified for Linux. --marekm + +# REQUIRED for useradd/userdel/usermod +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, +# MAIL_DIR takes precedence. +# +# Essentially: +# - MAIL_DIR defines the location of users mail spool files +# (for mbox use) by appending the username to MAIL_DIR as defined +# below. +# - MAIL_FILE defines the location of the users mail spool files as the +# fully-qualified filename obtained by prepending the user home +# directory before $MAIL_FILE +# +# NOTE: This is no more used for setting up users MAIL environment variable +# which is, starting from shadow 4.0.12-1 in Debian, entirely the +# job of the pam_mail PAM modules +# See default PAM configuration files provided for +# login, su, etc. +# +# This is a temporary situation: setting these variables will soon +# move to /etc/default/useradd and the variables will then be +# no more supported +MAIL_DIR /var/mail +#MAIL_FILE .mail + +# +# Enable logging and display of /var/log/faillog login failure info. +# This option conflicts with the pam_tally PAM module. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +# WARNING: Unknown usernames may become world readable. +# See #290803 and #298773 for details about how this could become a security +# concern +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin +ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/games + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +# In Debian /usr/bin/bsd-write or similar programs are setgid tty +# However, the default and recommended value for TTYPERM is still 0600 +# to not allow anyone to write to anyone else console or terminal + +# Users can still allow other people to write them by issuing +# the "mesg y" command. + +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# UMASK Default "umask" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# +# UMASK usage is discouraged because it catches only some classes of user +# entries to system, in fact only those made through login(1), while setting +# umask in shell rc file will catch also logins through su, cron, ssh etc. +# +# At the same time, using shell rc to set umask won't catch entries which use +# non-shell executables in place of login shell, like /usr/sbin/pppd for "ppp" +# user and alike. +# +# Therefore the use of pam_umask is recommended (Debian package libpam-umask) +# as the solution which catches all these cases on PAM-enabled systems. +# +# This avoids the confusion created by having the umask set +# in two different places -- in login.defs and shell rc files (i.e. +# /etc/profile). +# +# For discussion, see #314539 and #248150 as well as the thread starting at +# http://lists.debian.org/debian-devel/2005/06/msg01598.html +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +# 022 is the "historical" value in Debian for UMASK when it was used +# 027, or even 077, could be considered better for privacy +# There is no One True Answer here : each sysadmin must make up their +# mind. +#UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_WARN_AGE 7 + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 100 +GID_MAX 60000 + +# +# Max number of login retries if password is bad. This will most likely be +# overridden by PAM, since the default pam_unix module has it's own built +# in of 3 retries. However, this is a safe fallback in case you are using +# an authentication module that does not enforce PAM_MAXTRIES. +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# This enables userdel to remove user groups if no members exist. +# +# Other former uses of this variable such as setting the umask when +# user==primary group are not used in PAM environments, thus in Debian +# +USERGROUPS_ENAB yes + +# +# Instead of the real user shell, the program specified by this parameter +# will be launched, although its visible name (argv[0]) will be the shell's. +# The program may do whatever it wants (logging, additional authentification, +# banner, ...) before running the actual shell. +# +# FAKE_SHELL /bin/fakeshell + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +# This variable is used by login and su. +# +#CONSOLE /etc/consoles +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# This variable is used by login and su. +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is used by chpasswd, gpasswd and newusers. +# +#MD5_CRYPT_ENAB no + +################# OBSOLETED BY PAM ############## +# # +# These options are now handled by PAM. Please # +# edit the appropriate file in /etc/pam.d/ to # +# enable the equivalents of them. +# +############### + +#MOTD_FILE +#DIALUPS_CHECK_ENAB +#LASTLOG_ENAB +#MAIL_CHECK_ENAB +#OBSCURE_CHECKS_ENAB +#PORTTIME_CHECKS_ENAB +#SU_WHEEL_ONLY +#PASS_CHANGE_TRIES +#PASS_ALWAYS_WARN +#ENVIRON_FILE +#NOLOGINS_FILE +#ISSUE_FILE +#PASS_MIN_LEN +#PASS_MAX_LEN +#ULIMIT +#ENV_HZ +#CHFN_AUTH +#CHSH_AUTH +#FAIL_DELAY + +################# OBSOLETED ####################### +# # +# These options are no more handled by shadow. # +# # +# Shadow utilities will display a warning if they # +# still appear. # +# # +################################################### + +# CLOSE_SESSIONS +# LOGIN_STRING +# NO_PASSWORD_CONSOLE +# QMAIL_DIR + + + diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/passwd b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/shadow b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/data/group b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/data/group new file mode 100644 index 0000000..6307e25 --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/data/group @@ -0,0 +1,42 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: +foo:x:103: diff --git a/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/groupadd.test b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/groupadd.test new file mode 100755 index 0000000..87f80fb --- /dev/null +++ b/tests/tests/grouptools/groupadd/25_groupadd_no_gshadow/groupadd.test @@ -0,0 +1,43 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd can add a group without /etc/gshadow" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Remove gshadow..." +rm -f /etc/gshadow +echo "OK" + +echo -n "Add group foo (groupadd foo)..." +groupadd foo +echo "OK" + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl data/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +test ! -f /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config.txt b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/default/useradd b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/default/useradd new file mode 100644 index 0000000..31c44ab --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/default/useradd @@ -0,0 +1,36 @@ +# Default values for useradd(8) +# +# The SHELL variable specifies the default login shell on your +# system. +# Similar to DHSELL in adduser. However, we use "sh" here because +# useradd is a low level utility and should be as general +# as possible +SHELL=/bin/foobar +# +# The default group for users +# 100=users on Debian systems +# Same as USERS_GID in adduser +# This argument is used when the -n flag is specified. +# The default behavior (when -n and -g are not specified) is to create a +# primary user group with the same name as the user being added to the +# system. +GROUP=10 +# +# The default home directory. Same as DHOME for adduser +HOME=/tmp +# +# The number of days after a password expires until the account +# is permanently disabled +INACTIVE=12 +# +# The default expire date +EXPIRE=2007-12-02 +# +# The SKEL variable specifies the directory containing "skeletal" user +# files; in other words, files such as a sample .profile that will be +# copied to the new user's home directory when it is created. +# SKEL=/etc/skel +# +# Defines whether the mail spool should be created while +# creating the account +# CREATE_MAIL_SPOOL=yes diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/group b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/gshadow b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/passwd b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/shadow b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/data/groupadd.err b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/data/groupadd.err new file mode 100644 index 0000000..bb5b556 --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/data/groupadd.err @@ -0,0 +1,14 @@ +Usage: groupadd [options] GROUP + +Options: + -f, --force exit successfully if the group already exists, + and cancel -g if the GID is already used + -g, --gid GID use GID for the new group + -h, --help display this help message and exit + -K, --key KEY=VALUE override /etc/login.defs defaults + -o, --non-unique allow to create groups with duplicate + (non-unique) GID + -p, --password PASSWORD use this encrypted password for the new group + -r, --system create a system account + -R, --root CHROOT_DIR directory to chroot into + diff --git a/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/groupadd.test b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/groupadd.test new file mode 100755 index 0000000..826a47a --- /dev/null +++ b/tests/tests/grouptools/groupadd/26_groupadd_-o_without_-g/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd -o require -g" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Add group foo, GID 4294967295 (groupadd -g 4294967295 foo)..." +groupadd -o group1 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "2" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config.txt b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config.txt new file mode 100644 index 0000000..31f5635 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config.txt @@ -0,0 +1,10 @@ +# no testsuite password +# root password: rootF00barbaz +# myuser password: myuserF00barbaz + +user foo, in group users (only in /etc/group) +user foo, in group tty (only in /etc/gshadow) +user foo, in group floppy +user foo, admin of group disk +user foo, admin and member of group fax +user foo, admin and member of group cdrom (only in /etc/gshadow) diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/group b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/group new file mode 100644 index 0000000..1012390 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/group @@ -0,0 +1,41 @@ +root:x:0: +daemon:x:1: +bin:x:2: +sys:x:3: +adm:x:4: +tty:x:5: +disk:x:6: +lp:x:7: +mail:x:8: +news:x:9: +uucp:x:10: +man:x:12: +proxy:x:13: +kmem:x:15: +dialout:x:20: +fax:x:21: +voice:x:22: +cdrom:x:24: +floppy:x:25: +tape:x:26: +sudo:x:27: +audio:x:29: +dip:x:30: +www-data:x:33: +backup:x:34: +operator:x:37: +list:x:38: +irc:x:39: +src:x:40: +gnats:x:41: +shadow:x:42: +utmp:x:43: +video:x:44: +sasl:x:45: +plugdev:x:46: +staff:x:50: +games:x:60: +users:x:100: +nogroup:x:65534: +crontab:x:101: +Debian-exim:x:102: diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/gshadow b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/gshadow new file mode 100644 index 0000000..ae42486 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/gshadow @@ -0,0 +1,41 @@ +root:*:: +daemon:*:: +bin:*:: +sys:*:: +adm:*:: +tty:*:: +disk:*:: +lp:*:: +mail:*:: +news:*:: +uucp:*:: +man:*:: +proxy:*:: +kmem:*:: +dialout:*:: +fax:*:: +voice:*:: +cdrom:*:: +floppy:*:: +tape:*:: +sudo:*:: +audio:*:: +dip:*:: +www-data:*:: +backup:*:: +operator:*:: +list:*:: +irc:*:: +src:*:: +gnats:*:: +shadow:*:: +utmp:*:: +video:*:: +sasl:*:: +plugdev:*:: +staff:*:: +games:*:: +users:*:: +nogroup:*:: +crontab:x:: +Debian-exim:x:: diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/passwd b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/passwd new file mode 100644 index 0000000..43fc135 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/passwd @@ -0,0 +1,19 @@ +root:x:0:0:root:/root:/bin/bash +daemon:x:1:1:daemon:/usr/sbin:/bin/sh +bin:x:2:2:bin:/bin:/bin/sh +sys:x:3:3:sys:/dev:/bin/sh +sync:x:4:65534:sync:/bin:/bin/sync +games:x:5:60:games:/usr/games:/bin/sh +man:x:6:12:man:/var/cache/man:/bin/sh +lp:x:7:7:lp:/var/spool/lpd:/bin/sh +mail:x:8:8:mail:/var/mail:/bin/sh +news:x:9:9:news:/var/spool/news:/bin/sh +uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:x:13:13:proxy:/bin:/bin/sh +www-data:x:33:33:www-data:/var/www:/bin/sh +backup:x:34:34:backup:/var/backups:/bin/sh +list:x:38:38:Mailing List Manager:/var/list:/bin/sh +irc:x:39:39:ircd:/var/run/ircd:/bin/sh +gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:x:65534:65534:nobody:/nonexistent:/bin/sh +Debian-exim:x:102:102::/var/spool/exim4:/bin/false diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/shadow b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/shadow new file mode 100644 index 0000000..5f50d18 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/config/etc/shadow @@ -0,0 +1,19 @@ +root:$1$NBLBLIXb$WUgojj1bNuxWEADQGt1m9.:12991:0:99999:7::: +daemon:*:12977:0:99999:7::: +bin:*:12977:0:99999:7::: +sys:*:12977:0:99999:7::: +sync:*:12977:0:99999:7::: +games:*:12977:0:99999:7::: +man:*:12977:0:99999:7::: +lp:*:12977:0:99999:7::: +mail:*:12977:0:99999:7::: +news:*:12977:0:99999:7::: +uucp:*:12977:0:99999:7::: +proxy:*:12977:0:99999:7::: +www-data:*:12977:0:99999:7::: +backup:*:12977:0:99999:7::: +list:*:12977:0:99999:7::: +irc:*:12977:0:99999:7::: +gnats:*:12977:0:99999:7::: +nobody:*:12977:0:99999:7::: +Debian-exim:!:12977:0:99999:7::: diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/data/groupadd.err b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/data/groupadd.err new file mode 100644 index 0000000..d3cae91 --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/data/groupadd.err @@ -0,0 +1,15 @@ +groupadd: unrecognized option '--zzinvalid' +Usage: groupadd [options] GROUP + +Options: + -f, --force exit successfully if the group already exists, + and cancel -g if the GID is already used + -g, --gid GID use GID for the new group + -h, --help display this help message and exit + -K, --key KEY=VALUE override /etc/login.defs defaults + -o, --non-unique allow to create groups with duplicate + (non-unique) GID + -p, --password PASSWORD use this encrypted password for the new group + -r, --system create a system account + -R, --root CHROOT_DIR directory to chroot into + diff --git a/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/groupadd.test b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/groupadd.test new file mode 100755 index 0000000..c8c0e9b --- /dev/null +++ b/tests/tests/grouptools/groupadd/27_groupadd_invalid_option/groupadd.test @@ -0,0 +1,54 @@ +#!/bin/sh + +set -e + +cd $(dirname $0) + +. ../../../common/config.sh +. ../../../common/log.sh + +log_start "$0" "groupadd provide usage when called with an invalid option" + +save_config + +# restore the files on exit +trap 'log_status "$0" "FAILURE"; restore_config' 0 + +change_config + +echo -n "Call groupadd with invalid options (groupadd --zzinvalid foo)..." +groupadd --zzinvalid foo 2>tmp/groupadd.err && exit 1 || { + status=$? +} +echo "OK" + +echo -n "Check returned status ($status)..." +test "$status" = "2" +echo "OK" + +echo "groupadd reported:" +echo "=======================================================================" +cat tmp/groupadd.err +echo "=======================================================================" +echo -n "Check that there were a failure message..." +diff -au data/groupadd.err tmp/groupadd.err +echo "error message OK." +rm -f tmp/groupadd.err + +echo -n "Check the passwd file..." +../../../common/compare_file.pl config/etc/passwd /etc/passwd +echo "OK" +echo -n "Check the group file..." +../../../common/compare_file.pl config/etc/group /etc/group +echo "OK" +echo -n "Check the shadow file..." +../../../common/compare_file.pl config/etc/shadow /etc/shadow +echo "OK" +echo -n "Check the gshadow file..." +../../../common/compare_file.pl config/etc/gshadow /etc/gshadow +echo "OK" + +log_status "$0" "SUCCESS" +restore_config +trap '' 0 + |