1 files changed, 507 insertions, 0 deletions
diff --git a/atacmdnames.cpp b/atacmdnames.cpp
new file mode 100644
index 0000000..b5e8ffc
--- /dev/null
+++ b/atacmdnames.cpp
@@ -0,0 +1,507 @@
+/*
+ * atacmdnames.cpp
+ *
+ * Home page of code is: https://www.smartmontools.org
+ *
+ * Copyright (C) 2003-08 Philip Williams
+ * Copyright (C) 2012-19 Christian Franke
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "atacmdnames.h"
+#include "static_assert.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+
+const char * atacmdnames_cpp_cvsid = "$Id: atacmdnames.cpp 4934 2019-07-01 20:54:14Z chrfranke $"
+  ATACMDNAMES_H_CVSID;
+
+const char cmd_reserved[]        = "[RESERVED]";
+const char cmd_vendor_specific[] = "[VENDOR SPECIFIC]";
+const char cmd_reserved_sa[]     = "[RESERVED FOR SERIAL ATA]";
+const char cmd_reserved_cf[]     = "[RESERVED FOR COMPACTFLASH ASSOCIATION]";
+const char cmd_reserved_mcpt[]   = "[RESERVED FOR MEDIA CARD PASS THROUGH]"; // ACS-3: Reserved
+const char cmd_recalibrate_ret4[]= "RECALIBRATE [RET-4]";
+const char cmd_seek_ret4[]       = "SEEK [RET-4]";
+
+// Tables B.3 and B.4 of T13/2161-D (ACS-3) Revision 4, September 4, 2012
+
+const char * const command_table[] = {
+/*-------------------------------------------------- 00h-0Fh -----*/
+  "NOP",
+  cmd_reserved,
+  cmd_reserved,
+  "CFA REQUEST EXTENDED ERROR",
+  cmd_reserved,
+  cmd_reserved,
+  "DATA SET MANAGEMENT", // ACS-2
+  cmd_reserved,
+  "DEVICE RESET",
+  cmd_reserved,
+  cmd_reserved,
+  "REQUEST SENSE DATA EXT", // ACS-2
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- 10h-1Fh -----*/
+  "RECALIBRATE [OBS-4]",
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+  cmd_recalibrate_ret4,
+/*-------------------------------------------------- 20h-2Fh -----*/
+  "READ SECTOR(S)",
+  "READ SECTOR(S) [OBS-5]",
+  "READ LONG [OBS-4]",
+  "READ LONG (w/o retry) [OBS-4]",
+  "READ SECTOR(S) EXT",
+  "READ DMA EXT",
+  "READ DMA QUEUED EXT [OBS-ACS-2]",
+  "READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]",
+  cmd_reserved,
+  "READ MULTIPLE EXT",
+  "READ STREAM DMA",
+  "READ STREAM",
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  "READ LOG EXT",
+/*-------------------------------------------------- 30h-3Fh -----*/
+  "WRITE SECTOR(S)",
+  "WRITE SECTOR(S) (w/o retry) [OBS-5]",
+  "WRITE LONG [OBS-4]",
+  "WRITE LONG (w/o retry) [OBS-4]",
+  "WRITE SECTORS(S) EXT",
+  "WRITE DMA EXT",
+  "WRITE DMA QUEUED EXT [OBS-ACS-2]",
+  "SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]",
+  "CFA WRITE SECTORS WITHOUT ERASE",
+  "WRITE MULTIPLE EXT",
+  "WRITE STREAM DMA",
+  "WRITE STREAM",
+  "WRITE VERIFY [OBS-4]",
+  "WRITE DMA FUA EXT",
+  "WRITE DMA QUEUED FUA EXT [OBS-ACS-2]",
+  "WRITE LOG EXT",
+/*-------------------------------------------------- 40h-4Fh -----*/
+  "READ VERIFY SECTOR(S)",
+  "READ VERIFY SECTOR(S) (w/o retry) [OBS-5]",
+  "READ VERIFY SECTOR(S) EXT",
+  cmd_reserved,
+  cmd_reserved,
+  "WRITE UNCORRECTABLE EXT", // ATA-8
+  cmd_reserved,
+  "READ LOG DMA EXT", // ATA-8
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- 50h-5Fh -----*/
+  "FORMAT TRACK [OBS-4]",
+  "CONFIGURE STREAM",
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  "WRITE LOG DMA EXT", // ATA-8
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  "TRUSTED NON-DATA", // ATA-8
+  "TRUSTED RECEIVE", // ATA-8
+  "TRUSTED RECEIVE DMA", // ATA-8
+  "TRUSTED SEND", // ATA-8
+  "TRUSTED SEND DMA", // ATA-8
+/*-------------------------------------------------- 60h-6Fh -----*/
+  "READ FPDMA QUEUED", // ATA-8
+  "WRITE FPDMA QUEUED", // ATA-8
+  cmd_reserved_sa,
+  "NCQ QUEUE MANAGEMENT", // ACS-3
+  "SEND FPDMA QUEUED", // ACS-3
+  "RECEIVE FPDMA QUEUED", // ACS-3
+  cmd_reserved_sa,
+  cmd_reserved_sa,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- 70h-7Fh -----*/
+  "SEEK [OBS-7]",
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  "SET DATE & TIME EXT", // ACS-3
+  "ACCESSIBLE MAX ADDRESS CONFIGURATION", // ACS-3
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+  cmd_seek_ret4,
+/*-------------------------------------------------- 80h-8Fh -----*/
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  "CFA TRANSLATE SECTOR [VS IF NO CFA]",
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+/*-------------------------------------------------- 90h-9Fh -----*/
+  "EXECUTE DEVICE DIAGNOSTIC",
+  "INITIALIZE DEVICE PARAMETERS [OBS-6]",
+  "DOWNLOAD MICROCODE",
+  "DOWNLOAD MICROCODE DMA", // ACS-2
+  "STANDBY IMMEDIATE [RET-4]",
+  "IDLE IMMEDIATE [RET-4]",
+  "STANDBY [RET-4]",
+  "IDLE [RET-4]",
+  "CHECK POWER MODE [RET-4]",
+  "SLEEP [RET-4]",
+  cmd_vendor_specific,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- A0h-AFh -----*/
+  "PACKET",
+  "IDENTIFY PACKET DEVICE",
+  "SERVICE [OBS-ACS-2]",
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- B0h-BFh -----*/
+  "SMART",
+  "DEVICE CONFIGURATION [OBS-ACS-3]",
+  cmd_reserved,
+  cmd_reserved,
+  "SANITIZE DEVICE", // ACS-2
+  cmd_reserved,
+  "NV CACHE [OBS-ACS-3]", // ATA-8
+  cmd_reserved_cf,
+  cmd_reserved_cf,
+  cmd_reserved_cf,
+  cmd_reserved_cf,
+  cmd_reserved_cf,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+/*-------------------------------------------------- C0h-CFh -----*/
+  "CFA ERASE SECTORS [VS IF NO CFA]",
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  "READ MULTIPLE",
+  "WRITE MULTIPLE",
+  "SET MULTIPLE MODE",
+  "READ DMA QUEUED [OBS-ACS-2]",
+  "READ DMA",
+  "READ DMA (w/o retry) [OBS-5]",
+  "WRITE DMA",
+  "WRITE DMA (w/o retry) [OBS-5]",
+  "WRITE DMA QUEUED [OBS-ACS-2]",
+  "CFA WRITE MULTIPLE WITHOUT ERASE",
+  "WRITE MULTIPLE FUA EXT",
+  cmd_reserved,
+/*-------------------------------------------------- D0h-DFh -----*/
+  cmd_reserved,
+  "CHECK MEDIA CARD TYPE [OBS-ACS-2]",
+  cmd_reserved_mcpt,
+  cmd_reserved_mcpt,
+  cmd_reserved_mcpt,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  cmd_reserved,
+  "GET MEDIA STATUS [OBS-8]",
+  "ACKNOWLEDGE MEDIA CHANGE [RET-4]",
+  "BOOT POST-BOOT [RET-4]",
+  "BOOT PRE-BOOT [RET-4]",
+  "MEDIA LOCK [OBS-8]",
+  "MEDIA UNLOCK [OBS-8]",
+/*-------------------------------------------------- E0h-EFh -----*/
+  "STANDBY IMMEDIATE",
+  "IDLE IMMEDIATE",
+  "STANDBY",
+  "IDLE",
+  "READ BUFFER",
+  "CHECK POWER MODE",
+  "SLEEP",
+  "FLUSH CACHE",
+  "WRITE BUFFER",
+  "READ BUFFER DMA", // ACS-2 (was: WRITE SAME [RET-4])
+  "FLUSH CACHE EXT",
+  "WRITE BUFFER DMA", // ACS-2
+  "IDENTIFY DEVICE",
+  "MEDIA EJECT [OBS-8]",
+  "IDENTIFY DEVICE DMA [OBS-4]",
+  "SET FEATURES",
+/*-------------------------------------------------- F0h-FFh -----*/
+  cmd_vendor_specific,
+  "SECURITY SET PASSWORD",
+  "SECURITY UNLOCK",
+  "SECURITY ERASE PREPARE",
+  "SECURITY ERASE UNIT",
+  "SECURITY FREEZE LOCK",
+  "SECURITY DISABLE PASSWORD",
+  cmd_vendor_specific,
+  "READ NATIVE MAX ADDRESS [OBS-ACS-3]",
+  "SET MAX ADDRESS [OBS-ACS-3]",
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific,
+  cmd_vendor_specific
+};
+
+STATIC_ASSERT(sizeof(command_table) == 256 * sizeof(command_table[0]));
+
+/* Returns the name of the command (and possibly sub-command) with the given
+   command code and feature register values.   For most command codes this
+   simply returns the corresponding entry in the command_table array, but for
+   others the value of the feature register specifies a subcommand or
+   distinguishes commands. */
+const char *look_up_ata_command(unsigned char c_code, unsigned char f_reg) {
+
+  switch (c_code) {
+  case 0x00:  /* NOP */
+    switch (f_reg) {
+    case 0x00:
+      return "NOP [Abort queued commands]";
+    case 0x01:
+      return "NOP [Don't abort queued commands] [OBS-ACS-2]";
+    default:
+      return "NOP [Reserved subcommand] [OBS-ACS-2]";
+    }
+  case 0x92:  /* DOWNLOAD MICROCODE */
+    switch (f_reg) {
+    case 0x01:
+      return "DOWNLOAD MICROCODE [Temporary] [OBS-8]";
+    case 0x03:
+      return "DOWNLOAD MICROCODE [Save with offsets]"; // ATA-8
+    case 0x07:
+      return "DOWNLOAD MICROCODE [Save]";
+    case 0x0e:
+      return "DOWNLOAD MICROCODE [Save for future use]"; // ACS-3
+    case 0x0f:
+      return "DOWNLOAD MICROCODE [Activate]"; // ACS-3
+    default:
+      return "DOWNLOAD MICROCODE [Reserved subcommand]";
+    }
+  case 0xB0:  /* SMART */
+    switch (f_reg) {
+    case 0xD0:
+      return "SMART READ DATA";
+    case 0xD1:
+      return "SMART READ ATTRIBUTE THRESHOLDS [OBS-4]";
+    case 0xD2:
+      return "SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE";
+    case 0xD3:
+      return "SMART SAVE ATTRIBUTE VALUES [OBS-6]";
+    case 0xD4:
+      return "SMART EXECUTE OFF-LINE IMMEDIATE";
+    case 0xD5:
+      return "SMART READ LOG";
+    case 0xD6:
+      return "SMART WRITE LOG";
+    case 0xD7:
+      return "SMART WRITE ATTRIBUTE THRESHOLDS [NS, OBS-4]";
+    case 0xD8:
+      return "SMART ENABLE OPERATIONS";
+    case 0xD9:
+      return "SMART DISABLE OPERATIONS";
+    case 0xDA:
+      return "SMART RETURN STATUS";
+    case 0xDB:
+      return "SMART EN/DISABLE AUTO OFFLINE [NS (SFF-8035i)]";
+    default:
+        if (f_reg >= 0xE0)
+          return "SMART [Vendor specific subcommand]";
+        else
+          return "SMART [Reserved subcommand]";
+    }
+  case 0xB1:  /* DEVICE CONFIGURATION */
+    switch (f_reg) {
+    case 0xC0:
+      return "DEVICE CONFIGURATION RESTORE [OBS-ACS-3]";
+    case 0xC1:
+      return "DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]";
+    case 0xC2:
+      return "DEVICE CONFIGURATION IDENTIFY [OBS-ACS-3]";
+    case 0xC3:
+      return "DEVICE CONFIGURATION SET [OBS-ACS-3]";
+    default:
+      return "DEVICE CONFIGURATION [Reserved subcommand] [OBS-ACS-3]";
+    }
+  case 0xEF:  /* SET FEATURES */
+    switch (f_reg) {
+    case 0x01:
+      return "SET FEATURES [Enable 8-bit PIO] [OBS-3]"; // Now CFA
+    case 0x02:
+      return "SET FEATURES [Enable write cache]";
+    case 0x03:
+      return "SET FEATURES [Set transfer mode]";
+    case 0x04:
+      return "SET FEATURES [Enable auto DR] [OBS-4]";
+    case 0x05:
+      return "SET FEATURES [Enable APM]";
+    case 0x06:
+      return "SET FEATURES [Enable Pwr-Up In Standby]";
+    case 0x07:
+      return "SET FEATURES [Set device spin-up]";
+    case 0x09:
+      return "SET FEATURES [Reserved (address offset)] [OPS-ACS-3]";
+    case 0x0A:
+      return "SET FEATURES [Enable CFA power mode 1]";
+    case 0x10:
+      return "SET FEATURES [Enable SATA feature]"; // ACS-3
+    case 0x20:
+      return "SET FEATURES [Set Time-ltd R/W WCT]";
+    case 0x21:
+      return "SET FEATURES [Set Time-ltd R/W EH]";
+    case 0x31:
+      return "SET FEATURES [Disable Media Status Notf] [OBS-8]";
+    case 0x33:
+      return "SET FEATURES [Disable retry] [OBS-4]";
+    case 0x41:
+      return "SET FEATURES [Enable Free-fall Control]"; // ATA-8
+    case 0x42:
+      return "SET FEATURES [Enable AAM] [OBS-ACS-2]";
+    case 0x43:
+      return "SET FEATURES [Set Max Host I/F S Times]";
+    case 0x44:
+      return "SET FEATURES [Length of VS data] [OBS-4]";
+    case 0x4a:
+      return "SET FEATURES [Ext. Power Conditions]"; // ACS-2
+    case 0x54:
+      return "SET FEATURES [Set cache segs] [OBS-4]";
+    case 0x55:
+      return "SET FEATURES [Disable read look-ahead]";
+    case 0x5D:
+      return "SET FEATURES [Enable release interrupt] [OBS-ACS-2]";
+    case 0x5E:
+      return "SET FEATURES [Enable SERVICE interrupt] [OBS-ACS-2]";
+    case 0x66:
+      return "SET FEATURES [Disable revert defaults]";
+    case 0x69:
+      return "SET FEATURES [LPS Error Reporting Control]"; // ACS-2
+    case 0x77:
+      return "SET FEATURES [Disable ECC] [OBS-4]";
+    case 0x81:
+      return "SET FEATURES [Disable 8-bit PIO] [OBS-3]"; // Now CFA
+    case 0x82:
+      return "SET FEATURES [Disable write cache]";
+    case 0x84:
+      return "SET FEATURES [Disable auto DR] [OBS-4]";
+    case 0x85:
+      return "SET FEATURES [Disable APM]";
+    case 0x86:
+      return "SET FEATURES [Disable Pwr-Up In Standby]";
+    case 0x88:
+      return "SET FEATURES [Disable ECC] [OBS-4]";
+    case 0x89:
+      return "SET FEATURES [Reserved (address offset)]";
+    case 0x8A:
+      return "SET FEATURES [Disable CFA power mode 1]";
+    case 0x90:
+      return "SET FEATURES [Disable SATA feature]"; // ACS-3
+    case 0x95:
+      return "SET FEATURES [Enable Media Status Notf] [OBS-8]";
+    case 0x99:
+      return "SET FEATURES [Enable retries] [OBS-4]";
+    case 0x9A:
+      return "SET FEATURES [Set max avg curr] [OBS-4]";
+    case 0xAA:
+      return "SET FEATURES [Enable read look-ahead]";
+    case 0xAB:
+      return "SET FEATURES [Set max prefetch] [OBS-4]";
+    case 0xBB:
+      return "SET FEATURES [4 bytes VS data] [OBS-4]";
+    case 0xC1:
+      return "SET FEATURES [Disable Free-fall Control]"; // ATA-8
+    case 0xC2:
+      return "SET FEATURES [Disable AAM] [OBS-ACS-2]";
+    case 0xC3:
+      return "SET FEATURES [Sense Data Reporting]"; // ACS-2
+    case 0xCC:
+      return "SET FEATURES [Enable revert to defaults]";
+    case 0xDD:
+      return "SET FEATURES [Disable release interrupt] [OBS-ACS-2]";
+    case 0xDE:
+      return "SET FEATURES [Disable SERVICE interrupt] [OBS-ACS-2]";
+    case 0xE0:
+      return "SET FEATURES [Vendor specific] [OBS-7]";
+    default:
+      if (f_reg >= 0xF0)
+        return "SET FEATURES [Reserved for CFA]";
+      else
+        return "SET FEATURES [Reserved subcommand]";
+    }
+  case 0xF9:  /* SET MAX */
+    switch (f_reg) {
+    case 0x00:
+      return "SET MAX ADDRESS [OBS-6]";
+    case 0x01:
+      return "SET MAX SET PASSWORD [OBS-ACS-3]";
+    case 0x02:
+      return "SET MAX LOCK [OBS-ACS-3]";
+    case 0x03:
+      return "SET MAX UNLOCK [OBS-ACS-3]";
+    case 0x04:
+      return "SET MAX FREEZE LOCK [OBS-ACS-3]";
+    default:
+      return "SET MAX [Reserved subcommand] [OBS-ACS-3]";
+    }
+  default:
+    return command_table[c_code];
+  }
+}