diff options
Diffstat (limited to 'os_win32/smartd_warning.cmd')
| -rw-r--r-- | os_win32/smartd_warning.cmd | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/os_win32/smartd_warning.cmd b/os_win32/smartd_warning.cmd new file mode 100644 index 0000000..bfc459b --- /dev/null +++ b/os_win32/smartd_warning.cmd @@ -0,0 +1,210 @@ +@echo off +:: +:: smartd warning script +:: +:: Home page of code is: http://www.smartmontools.org +:: +:: Copyright (C) 2012-22 Christian Franke +:: +:: SPDX-License-Identifier: GPL-2.0-or-later +:: +:: $Id: smartd_warning.cmd 5428 2022-12-31 15:55:43Z chrfranke $ +:: + +verify other 2>nul +setlocal enableextensions enabledelayedexpansion +if errorlevel 1 goto UNSUPPORTED +set err= + +:: Change to script directory (not necessary if run from smartd service) +cd /d %~dp0 +if errorlevel 1 goto ERROR + +:: Detect accidental use of '-M exec /path/to/smartd_warning.cmd' +if not "!SMARTD_SUBJECT!" == "" ( + echo smartd_warning.cmd: SMARTD_SUBJECT is already set - possible recursion + goto ERROR +) + +:: Parse options +set dryrun= +if "%1" == "--dryrun" ( + set dryrun=--dryrun + shift +) +if not "!dryrun!" == "" echo cd /d !cd! + +if not "%1" == "" ( + echo smartd warning message script + echo. + echo Usage: + echo set SMARTD_MAILER='Path to external script, empty for "blat"' + echo set SMARTD_ADDRESS='Space separated mail addresses, empty if none' + echo set SMARTD_MESSAGE='Error Message' + echo set SMARTD_FAILTYPE='Type of failure, "EMailTest" for tests' + echo set SMARTD_TFIRST='Date of first message sent, empty if none' + echo :: set SMARTD_TFIRSTEPOCH='time_t format of above' + echo set SMARTD_PREVCNT='Number of previous messages, 0 if none' + echo set SMARTD_NEXTDAYS='Number of days until next message, empty if none' + echo set SMARTD_DEVICEINFO='Device identify information' + echo :: set SMARTD_DEVICE='Device name' + echo :: set SMARTD_DEVICESTRING='Annotated device name' + echo :: set SMARTD_DEVICETYPE='Device type from -d directive, "auto" if none' + + echo smartd_warning.cmd [--dryrun] + goto ERROR +) + +if "!SMARTD_ADDRESS!!SMARTD_MAILER!" == "" ( + echo smartd_warning.cmd: SMARTD_ADDRESS or SMARTD_MAILER must be set + goto ERROR +) + +:: USERDNSDOMAIN may be unset if running as service +if "!USERDNSDOMAIN!" == "" ( + for /f "delims== tokens=2 usebackq" %%d in (`wmic PATH Win32_Computersystem WHERE "PartOfDomain=TRUE" GET Domain /VALUE ^<nul 2^>nul`) do set USERDNSDOMAIN=%%~d +) +:: Remove possible trailing \r appended by above command (requires %...%) +set USERDNSDOMAIN=%USERDNSDOMAIN% + +:: Format subject +set SMARTD_SUBJECT=SMART error (!SMARTD_FAILTYPE!) detected on host: !COMPUTERNAME! + +:: Temp file for message +if not "!TMP!" == "" set SMARTD_FULLMSGFILE=!TMP!\smartd_warning-!RANDOM!.txt +if "!TMP!" == "" set SMARTD_FULLMSGFILE=smartd_warning-!RANDOM!.txt + +:: Format message +( + echo This message was generated by the smartd service running on: + echo. + echo. host name: !COMPUTERNAME! + if not "!USERDNSDOMAIN!" == "" echo. DNS domain: !USERDNSDOMAIN! + if "!USERDNSDOMAIN!" == "" echo. DNS domain: [Empty] + if not "!USERDOMAIN!" == "" echo. Win domain: !USERDOMAIN! + echo. + echo The following warning/error was logged by the smartd service: + echo. + if not "!SMARTD_MESSAGE!" == "" echo !SMARTD_MESSAGE! + if "!SMARTD_MESSAGE!" == "" echo [SMARTD_MESSAGE] + echo. + echo Device info: + if not "!SMARTD_DEVICEINFO!" == "" echo !SMARTD_DEVICEINFO! + if "!SMARTD_DEVICEINFO!" == "" echo [SMARTD_DEVICEINFO] + echo. + echo For details see the event log or log file of smartd. + if not "!SMARTD_FAILTYPE!" == "EmailTest" ( + echo. + echo You can also use the smartctl utility for further investigation. + if not "!SMARTD_PREVCNT!" == "0" echo The original message about this issue was sent at !SMARTD_TFIRST! + if "!SMARTD_NEXTDAYS!" == "" ( + echo No additional messages about this problem will be sent. + ) else ( if "!SMARTD_NEXTDAYS!" == "0" ( + echo Another message will be sent upon next check if the problem persists. + ) else ( if "!SMARTD_NEXTDAYS!" == "1" ( + echo Another message will be sent in 24 hours if the problem persists. + ) else ( + echo Another message will be sent in !SMARTD_NEXTDAYS! days if the problem persists. + ))) + ) +) > "!SMARTD_FULLMSGFILE!" +if errorlevel 1 goto ERROR + +if not "!dryrun!" == "" ( + echo !SMARTD_FULLMSGFILE!: + type "!SMARTD_FULLMSGFILE!" + echo --EOF-- +) + +:: Check first address +set first= +for /f "tokens=1*" %%a in ("!SMARTD_ADDRESS!") do (set first=%%a) +set wtssend= +if "!first!" == "console" set wtssend=-c +if "!first!" == "active" set wtssend=-a +if "!first!" == "connected" set wtssend=-s + +if not "!wtssend!" == "" ( + :: Show Message box(es) via WTSSendMessage() + if not "!dryrun!" == "" ( + echo call .\wtssendmsg !wtssend! "!SMARTD_SUBJECT!" - ^< "!SMARTD_FULLMSGFILE!" + ) else ( + call .\wtssendmsg !wtssend! "!SMARTD_SUBJECT!" - < "!SMARTD_FULLMSGFILE!" + if errorlevel 1 set err=t + ) + :: Remove first address + for /f "tokens=1*" %%a in ("!SMARTD_ADDRESS!") do (set SMARTD_ADDRESS=%%b) +) + +:: Make comma separated address list +set SMARTD_ADDRCSV= +if not "!SMARTD_ADDRESS!" == "" set SMARTD_ADDRCSV=!SMARTD_ADDRESS: =,! + +:: Default mailer is smartd_mailer.ps1 (if configured) or blat.exe +if not "!SMARTD_ADDRESS!" == "" if "!SMARTD_MAILER!" == "" ( + if not exist smartd_mailer.conf.ps1 set SMARTD_MAILER=blat +) + +:: Get mailer extension +set ext= +for /f "delims=" %%f in ("!SMARTD_MAILER!") do (set ext=%%~xf) + +:: Send mail or run command +if "!ext!" == ".ps1" ( + + :: Run PowerShell script + if not "!dryrun!" == "" ( + set esc=^^ + echo PowerShell -NoProfile -ExecutionPolicy Bypass -Command !esc!^& '!SMARTD_MAILER!' ^<nul + ) else ( + PowerShell -NoProfile -ExecutionPolicy Bypass -Command ^& '!SMARTD_MAILER!' <nul + if errorlevel 1 set err=t + ) + +) else ( if not "!SMARTD_ADDRCSV!" == "" ( + + :: Send mail + if "!SMARTD_MAILER!" == "" ( + + :: Use smartd_mailer.ps1 + if not "!dryrun!" == "" ( + echo PowerShell -NoProfile -ExecutionPolicy Bypass -Command .\smartd_mailer.ps1 ^<nul + echo ========== + ) + PowerShell -NoProfile -ExecutionPolicy Bypass -Command .\smartd_mailer.ps1 !dryrun! <nul + if errorlevel 1 set err=t + if not "!dryrun!" == "" echo ========== + + ) else ( + + :: Use blat mailer or compatible + if not "!dryrun!" == "" ( + echo call "!SMARTD_MAILER!" - -q -subject "!SMARTD_SUBJECT!" -to "!SMARTD_ADDRCSV!" ^< "!SMARTD_FULLMSGFILE!" + ) else ( + call "!SMARTD_MAILER!" - -q -subject "!SMARTD_SUBJECT!" -to "!SMARTD_ADDRCSV!" < "!SMARTD_FULLMSGFILE!" + if errorlevel 1 set err=t + ) + + ) + +) else ( if not "!SMARTD_MAILER!" == "" ( + + :: Run command + if not "!dryrun!" == "" ( + echo call "!SMARTD_MAILER!" ^<nul + ) else ( + call "!SMARTD_MAILER!" <nul + if errorlevel 1 set err=t + ) + +))) + +del "!SMARTD_FULLMSGFILE!" >nul 2>nul + +if not "!err!" == "" goto ERROR +endlocal +exit /b 0 + +:ERROR +endlocal +exit /b 1 |