diff options
Diffstat (limited to 'doc/usage/restructuredtext/basics.rst')
| -rw-r--r-- | doc/usage/restructuredtext/basics.rst | 631 |
1 files changed, 631 insertions, 0 deletions
diff --git a/doc/usage/restructuredtext/basics.rst b/doc/usage/restructuredtext/basics.rst new file mode 100644 index 0000000..cc3c615 --- /dev/null +++ b/doc/usage/restructuredtext/basics.rst @@ -0,0 +1,631 @@ +.. highlight:: rst + +.. _rst-primer: + +======================= +reStructuredText Primer +======================= + +reStructuredText is the default plaintext markup language used by Sphinx. This +section is a brief introduction to reStructuredText (reST) concepts and syntax, +intended to provide authors with enough information to author documents +productively. Since reST was designed to be a simple, unobtrusive markup +language, this will not take too long. + +.. seealso:: + + The authoritative `reStructuredText User Documentation + <https://docutils.sourceforge.io/rst.html>`_. The "ref" links in this + document link to the description of the individual constructs in the reST + reference. + + +Paragraphs +---------- + +The paragraph (:duref:`ref <paragraphs>`) is the most basic block in a reST +document. Paragraphs are simply chunks of text separated by one or more blank +lines. As in Python, indentation is significant in reST, so all lines of the +same paragraph must be left-aligned to the same level of indentation. + + +.. _rst-inline-markup: + +Inline markup +------------- + +The standard reST inline markup is quite simple: use + +* one asterisk: ``*text*`` for emphasis (italics), +* two asterisks: ``**text**`` for strong emphasis (boldface), and +* backquotes: ````text```` for code samples. + +If asterisks or backquotes appear in running text and could be confused with +inline markup delimiters, they have to be escaped with a backslash. + +Be aware of some restrictions of this markup: + +* it may not be nested, +* content may not start or end with whitespace: ``* text*`` is wrong, +* it must be separated from surrounding text by non-word characters. Use a + backslash escaped space to work around that: ``thisis\ *one*\ word``. + +These restrictions may be lifted in future versions of the docutils. + +It is also possible to replace or expand upon some of this inline markup with +roles. Refer to :ref:`rst-roles-alt` for more information. + + +Lists and Quote-like blocks +--------------------------- + +List markup (:duref:`ref <bullet-lists>`) is natural: just place an asterisk at +the start of a paragraph and indent properly. The same goes for numbered +lists; they can also be autonumbered using a ``#`` sign:: + + * This is a bulleted list. + * It has two items, the second + item uses two lines. + + 1. This is a numbered list. + 2. It has two items too. + + #. This is a numbered list. + #. It has two items too. + +Nested lists are possible, but be aware that they must be separated from the +parent list items by blank lines:: + + * this is + * a list + + * with a nested list + * and some subitems + + * and here the parent list continues + +Definition lists (:duref:`ref <definition-lists>`) are created as follows:: + + term (up to a line of text) + Definition of the term, which must be indented + + and can even consist of multiple paragraphs + + next term + Description. + +Note that the term cannot have more than one line of text. + +Quoted paragraphs (:duref:`ref <block-quotes>`) are created by just indenting +them more than the surrounding paragraphs. + +Line blocks (:duref:`ref <line-blocks>`) are a way of preserving line breaks:: + + | These lines are + | broken exactly like in + | the source file. + +There are also several more special blocks available: + +* field lists (:duref:`ref <field-lists>`, with caveats noted in + :ref:`rst-field-lists`) +* option lists (:duref:`ref <option-lists>`) +* quoted literal blocks (:duref:`ref <quoted-literal-blocks>`) +* doctest blocks (:duref:`ref <doctest-blocks>`) + + +.. _rst-literal-blocks: + +Literal blocks +-------------- + +Literal code blocks (:duref:`ref <literal-blocks>`) are introduced by ending a +paragraph with the special marker ``::``. The literal block must be indented +(and, like all paragraphs, separated from the surrounding ones by blank +lines):: + + This is a normal text paragraph. The next paragraph is a code sample:: + + It is not processed in any way, except + that the indentation is removed. + + It can span multiple lines. + + This is a normal text paragraph again. + +The handling of the ``::`` marker is smart: + +* If it occurs as a paragraph of its own, that paragraph is completely left out + of the document. +* If it is preceded by whitespace, the marker is removed. +* If it is preceded by non-whitespace, the marker is replaced by a single + colon. + +That way, the second sentence in the above example's first paragraph would be +rendered as "The next paragraph is a code sample:". + +Code highlighting can be enabled for these literal blocks on a document-wide +basis using the :rst:dir:`highlight` directive and on a project-wide basis +using the :confval:`highlight_language` configuration option. The +:rst:dir:`code-block` directive can be used to set highlighting on a +block-by-block basis. These directives are discussed later. + + +.. _rst-doctest-blocks: + +Doctest blocks +-------------- + +Doctest blocks (:duref:`ref <doctest-blocks>`) are interactive Python sessions +cut-and-pasted into docstrings. They do not require the +:ref:`literal blocks <rst-literal-blocks>` syntax. The doctest block must end +with a blank line and should *not* end with an unused prompt:: + + >>> 1 + 1 + 2 + +.. _rst-tables: + +Tables +------ + +For *grid tables* (:duref:`ref <grid-tables>`), you have to "paint" the cell +grid yourself. They look like this:: + + +------------------------+------------+----------+----------+ + | Header row, column 1 | Header 2 | Header 3 | Header 4 | + | (header rows optional) | | | | + +========================+============+==========+==========+ + | body row 1, column 1 | column 2 | column 3 | column 4 | + +------------------------+------------+----------+----------+ + | body row 2 | ... | ... | | + +------------------------+------------+----------+----------+ + +*Simple tables* (:duref:`ref <simple-tables>`) are easier to write, but +limited: they must contain more than one row, and the first column cells cannot +contain multiple lines. They look like this:: + + ===== ===== ======= + A B A and B + ===== ===== ======= + False False False + True False False + False True False + True True True + ===== ===== ======= + +Two more syntaxes are supported: *CSV tables* and *List tables*. They use an +*explicit markup block*. Refer to :ref:`table-directives` for more information. + + +Hyperlinks +---------- + +External links +~~~~~~~~~~~~~~ + +Use ```Link text <https://domain.invalid/>`_`` for inline web links. If the +link text should be the web address, you don't need special markup at all, the +parser finds links and mail addresses in ordinary text. + +.. important:: There must be a space between the link text and the opening \< for the URL. + +You can also separate the link and the target definition (:duref:`ref +<hyperlink-targets>`), like this:: + + This is a paragraph that contains `a link`_. + + .. _a link: https://domain.invalid/ + +Internal links +~~~~~~~~~~~~~~ + +Internal linking is done via a special reST role provided by Sphinx, see the +section on specific markup, :ref:`ref-role`. + + +.. _rst-sections: + +Sections +-------- + +Section headers (:duref:`ref <sections>`) are created by underlining (and +optionally overlining) the section title with a punctuation character, at least +as long as the text:: + + ================= + This is a heading + ================= + +Normally, there are no heading levels assigned to certain characters as the +structure is determined from the succession of headings. However, this +convention is used in `Python Developer's Guide for documenting +<https://devguide.python.org/documentation/markup/#sections>`_ which you may +follow: + +* ``#`` with overline, for parts +* ``*`` with overline, for chapters +* ``=`` for sections +* ``-`` for subsections +* ``^`` for subsubsections +* ``"`` for paragraphs + +Of course, you are free to use your own marker characters (see the reST +documentation), and use a deeper nesting level, but keep in mind that most +target formats (HTML, LaTeX) have a limited supported nesting depth. + + +.. _rst-field-lists: + +Field Lists +----------- + +Field lists (:duref:`ref <field-lists>`) are sequences of fields marked up like +this:: + + :fieldname: Field content + +They are commonly used in Python documentation:: + + def my_function(my_arg, my_other_arg): + """A function just for me. + + :param my_arg: The first of my arguments. + :param my_other_arg: The second of my arguments. + + :returns: A message (just for me, of course). + """ + +Sphinx extends standard docutils behavior and intercepts field lists specified +at the beginning of documents. Refer to :doc:`field-lists` for more +information. + + +.. TODO This ref should be 'rst-roles', but that already exists. Rename the +.. other ones + +.. _rst-roles-alt: + +Roles +----- + +A role or "custom interpreted text role" (:duref:`ref <roles>`) is an inline +piece of explicit markup. It signifies that the enclosed text should be +interpreted in a specific way. Sphinx uses this to provide semantic markup and +cross-referencing of identifiers, as described in the appropriate section. The +general syntax is ``:rolename:`content```. + +Docutils supports the following roles: + +* :durole:`emphasis` -- equivalent of ``*emphasis*`` +* :durole:`strong` -- equivalent of ``**strong**`` +* :durole:`literal` -- equivalent of ````literal```` +* :durole:`subscript` -- subscript text +* :durole:`superscript` -- superscript text +* :durole:`title-reference` -- for titles of books, periodicals, and other + materials + +Refer to :doc:`roles` for roles added by Sphinx. + + +Explicit Markup +--------------- + +"Explicit markup" (:duref:`ref <explicit-markup-blocks>`) is used in reST for +most constructs that need special handling, such as footnotes, +specially-highlighted paragraphs, comments, and generic directives. + +An explicit markup block begins with a line starting with ``..`` followed by +whitespace and is terminated by the next paragraph at the same level of +indentation. (There needs to be a blank line between explicit markup and +normal paragraphs. This may all sound a bit complicated, but it is intuitive +enough when you write it.) + + +.. _rst-directives: + +Directives +---------- + +A directive (:duref:`ref <directives>`) is a generic block of explicit markup. +Along with roles, it is one of the extension mechanisms of reST, and Sphinx +makes heavy use of it. + +Docutils supports the following directives: + +* Admonitions: :dudir:`attention`, :dudir:`caution`, :dudir:`danger`, + :dudir:`error`, :dudir:`hint`, :dudir:`important`, :dudir:`note`, + :dudir:`tip`, :dudir:`warning` and the generic + :dudir:`admonition <admonitions>`. (Most themes style only "note" and + "warning" specially.) + +* Images: + + - :dudir:`image` (see also Images_ below) + - :dudir:`figure` (an image with caption and optional legend) + +* Additional body elements: + + - :dudir:`contents <table-of-contents>` (a local, i.e. for the current file + only, table of contents) + - :dudir:`container` (a container with a custom class, useful to generate an + outer ``<div>`` in HTML) + - :dudir:`rubric` (a heading without relation to the document sectioning) + - :dudir:`topic`, :dudir:`sidebar` (special highlighted body elements) + - :dudir:`parsed-literal` (literal block that supports inline markup) + - :dudir:`epigraph` (a block quote with optional attribution line) + - :dudir:`highlights`, :dudir:`pull-quote` (block quotes with their own + class attribute) + - :dudir:`compound <compound-paragraph>` (a compound paragraph) + +* Special tables: + + - :dudir:`table` (a table with title) + - :dudir:`csv-table` (a table generated from comma-separated values) + - :dudir:`list-table` (a table generated from a list of lists) + +* Special directives: + + - :dudir:`raw <raw-data-pass-through>` (include raw target-format markup) + - :dudir:`include` (include reStructuredText from another file) -- in Sphinx, + when given an absolute include file path, this directive takes it as + relative to the source directory + + .. _rstclass: + + - :dudir:`class` (assign a class attribute to the next element) + + .. note:: + + When the default domain contains a ``class`` directive, this directive + will be shadowed. Therefore, Sphinx re-exports it as ``rst-class``. + +* HTML specifics: + + - :dudir:`meta` + (generation of HTML ``<meta>`` tags, see also :ref:`html-meta` below) + - :dudir:`title <metadata-document-title>` (override document title) + +* Influencing markup: + + - :dudir:`default-role` (set a new default role) + - :dudir:`role` (create a new role) + + Since these are only per-file, better use Sphinx's facilities for setting the + :confval:`default_role`. + +.. warning:: + + Do *not* use the directives :dudir:`sectnum`, :dudir:`header` and + :dudir:`footer`. + +Directives added by Sphinx are described in :doc:`directives`. + +Basically, a directive consists of a name, arguments, options and content. +(Keep this terminology in mind, it is used in the next chapter describing +custom directives.) Looking at this example, :: + + .. function:: foo(x) + foo(y, z) + :module: some.module.name + + Return a line of text input from the user. + +``function`` is the directive name. It is given two arguments here, the +remainder of the first line and the second line, as well as one option +``module`` (as you can see, options are given in the lines immediately +following the arguments and indicated by the colons). Options must be indented +to the same level as the directive content. + +The directive content follows after a blank line and is indented relative to +the directive start or if options are present, by the same amount as the +options. + +Be careful as the indent is not a fixed number of whitespace, e.g. three, but +any number whitespace. This can be surprising when a fixed indent is used +throughout the document and can make a difference for directives which are +sensitive to whitespace. Compare:: + + .. code-block:: + :caption: A cool example + + The output of this line starts with four spaces. + + .. code-block:: + + The output of this line has no spaces at the beginning. + +In the first code block, the indent for the content was fixated by the option +line to three spaces, consequently the content starts with four spaces. +In the latter the indent was fixed by the content itself to seven spaces, thus +it does not start with a space. + + +Images +------ + +reST supports an image directive (:dudir:`ref <image>`), used like so:: + + .. image:: gnu.png + (options) + +When used within Sphinx, the file name given (here ``gnu.png``) must either be +relative to the source file, or absolute which means that they are relative to +the top source directory. For example, the file ``sketch/spam.rst`` could +refer to the image ``images/spam.png`` as ``../images/spam.png`` or +``/images/spam.png``. + +Sphinx will automatically copy image files over to a subdirectory of the output +directory on building (e.g. the ``_static`` directory for HTML output.) + +Interpretation of image size options (``width`` and ``height``) is as follows: +if the size has no unit or the unit is pixels, the given size will only be +respected for output channels that support pixels. Other units (like ``pt`` for +points) will be used for HTML and LaTeX output (the latter replaces ``pt`` by +``bp`` as this is the TeX unit such that ``72bp=1in``). + +Sphinx extends the standard docutils behavior by allowing an asterisk for the +extension:: + + .. image:: gnu.* + +Sphinx then searches for all images matching the provided pattern and +determines their type. Each builder then chooses the best image out of these +candidates. For instance, if the file name ``gnu.*`` was given and two files +:file:`gnu.pdf` and :file:`gnu.png` existed in the source tree, the LaTeX +builder would choose the former, while the HTML builder would prefer the +latter. Supported image types and choosing priority are defined at +:doc:`/usage/builders/index`. + +Note that image file names should not contain spaces. + +.. versionchanged:: 0.4 + Added the support for file names ending in an asterisk. + +.. versionchanged:: 0.6 + Image paths can now be absolute. + +.. versionchanged:: 1.5 + latex target supports pixels (default is ``96px=1in``). + + +Footnotes +--------- + +For footnotes (:duref:`ref <footnotes>`), use ``[#name]_`` to mark the footnote +location, and add the footnote body at the bottom of the document after a +"Footnotes" rubric heading, like so:: + + Lorem ipsum [#f1]_ dolor sit amet ... [#f2]_ + + .. rubric:: Footnotes + + .. [#f1] Text of the first footnote. + .. [#f2] Text of the second footnote. + +You can also explicitly number the footnotes (``[1]_``) or use auto-numbered +footnotes without names (``[#]_``). + + +Citations +--------- + +Standard reST citations (:duref:`ref <citations>`) are supported, with the +additional feature that they are "global", i.e. all citations can be referenced +from all files. Use them like so:: + + Lorem ipsum [Ref]_ dolor sit amet. + + .. [Ref] Book or article reference, URL or whatever. + +Citation usage is similar to footnote usage, but with a label that is not +numeric or begins with ``#``. + + +Substitutions +------------- + +reST supports "substitutions" (:duref:`ref <substitution-definitions>`), which +are pieces of text and/or markup referred to in the text by ``|name|``. They +are defined like footnotes with explicit markup blocks, like this:: + + .. |name| replace:: replacement *text* + +or this:: + + .. |caution| image:: warning.png + :alt: Warning! + +See the :duref:`reST reference for substitutions <substitution-definitions>` +for details. + +.. index:: ! pair: global; substitutions + +If you want to use some substitutions for all documents, put them into +:confval:`rst_prolog` or :confval:`rst_epilog` or put them into a separate file +and include it into all documents you want to use them in, using the +:dudir:`include` directive. (Be sure to give the include file a file name +extension differing from that of other source files, to avoid Sphinx finding it +as a standalone document.) + +Sphinx defines some default substitutions, see :ref:`default-substitutions`. + + +Comments +-------- + +Every explicit markup block which isn't a valid markup construct (like the +footnotes above) is regarded as a comment (:duref:`ref <comments>`). For +example:: + + .. This is a comment. + +You can indent text after a comment start to form multiline comments:: + + .. + This whole indented block + is a comment. + + Still in the comment. + + +.. _html-meta: + +HTML Metadata +------------- + +The :dudir:`meta` directive allows specifying the HTML +`metadata element`_ of a Sphinx documentation page. For example, the +directive:: + + .. meta:: + :description: The Sphinx documentation builder + :keywords: Sphinx, documentation, builder + +will generate the following HTML output: + +.. code:: html + + <meta name="description" content="The Sphinx documentation builder"> + <meta name="keywords" content="Sphinx, documentation, builder"> + +Also, Sphinx will add the keywords as specified in the meta directive to the +search index. Thereby, the ``lang`` attribute of the meta element is +considered. For example, the directive:: + + .. meta:: + :keywords: backup + :keywords lang=en: pleasefindthiskey pleasefindthiskeytoo + :keywords lang=de: bittediesenkeyfinden + +adds the following words to the search indices of builds with different language +configurations: + +* ``pleasefindthiskey``, ``pleasefindthiskeytoo`` to *English* builds; +* ``bittediesenkeyfinden`` to *German* builds; +* ``backup`` to builds in all languages. + +.. _metadata element: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/meta + + +Source encoding +--------------- + +Since the easiest way to include special characters like em dashes or copyright +signs in reST is to directly write them as Unicode characters, one has to +specify an encoding. Sphinx assumes source files to be encoded in UTF-8 by +default; you can change this with the :confval:`source_encoding` config value. + + +Gotchas +------- + +There are some problems one commonly runs into while authoring reST documents: + +* **Separation of inline markup:** As said above, inline markup spans must be + separated from the surrounding text by non-word characters, you have to use a + backslash-escaped space to get around that. See :duref:`the reference + <substitution-definitions>` for the details. + +* **No nested inline markup:** Something like ``*see :func:`foo`*`` is not + possible. |