Adding upstream version 2.9.4.upstream/2.9.4

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

18 files changed, 1285 insertions, 0 deletions

diff --git a/src/man/eu/include/ad_modified_defaults.xml b/src/man/eu/include/ad_modified_defaults.xml
new file mode 100644
index 0000000..6ee0537
--- /dev/null
+++ b/src/man/eu/include/ad_modified_defaults.xml
@@ -0,0 +1,104 @@
+<refsect1 id='modified-default-options'>
+    <title>MODIFIED DEFAULT OPTIONS</title>
+    <para>
+        Certain option defaults do not match their respective backend provider
+defaults, these option names and AD provider-specific defaults are listed
+below:
+    </para>
+    <refsect2 id='krb5_modifications'>
+        <title>KRB5 Provider</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    krb5_validate = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    krb5_use_enterprise_principal = true
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+    <refsect2 id='ldap_modifications'>
+        <title>LDAP Provider</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    ldap_schema = ad
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_force_upper_case_realm = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_id_mapping = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_sasl_mech = GSS-SPNEGO
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_referrals = false
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_account_expire_policy = ad
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_use_tokengroups = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_sasl_authid = sAMAccountName@REALM (typically SHORTNAME$@REALM)
+                </para>
+                <para>
+                    The AD provider looks for a different principal than the LDAP provider by
+default, because in an Active Directory environment the principals are
+divided into two groups - User Principals and Service Principals. Only User
+Principal can be used to obtain a TGT and by default, computer object's
+principal is constructed from its sAMAccountName and the AD realm. The
+well-known host/hostname@REALM principal is a Service Principal and thus
+cannot be used to get a TGT with.
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+    <refsect2 id='nss_modifications'>
+        <title>NSS configuration</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    fallback_homedir = /home/%d/%u
+                </para>
+                <para>
+                    The AD provider automatically sets "fallback_homedir = /home/%d/%u" to
+provide personal home directories for users without the homeDirectory
+attribute. If your AD Domain is properly populated with Posix attributes,
+and you want to avoid this fallback behavior, you can explicitly set
+"fallback_homedir = %o".
+                </para>
+                <para>
+                    Note that the system typically expects a home directory in /home/%u
+folder. If you decide to use a different directory structure, some other
+parts of your system may need adjustments.
+                </para>
+                <para>
+                    For example automated creation of home directories in combination with
+selinux requires selinux adjustment, otherwise the home directory will be
+created with wrong selinux context.
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+</refsect1>
diff --git a/src/man/eu/include/autofs_attributes.xml b/src/man/eu/include/autofs_attributes.xml
new file mode 100644
index 0000000..8016b31
--- /dev/null
+++ b/src/man/eu/include/autofs_attributes.xml
@@ -0,0 +1,66 @@
+<variablelist>
+    <varlistentry>
+        <term>ldap_autofs_map_object_class (string)</term>
+        <listitem>
+            <para>
+                The object class of an automount map entry in LDAP.
+            </para>
+            <para>
+                Default: nisMap (rfc2307, autofs_provider=ad), otherwise automountMap
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>ldap_autofs_map_name (string)</term>
+        <listitem>
+            <para>
+                The name of an automount map entry in LDAP.
+            </para>
+            <para>
+                Default: nisMapName (rfc2307, autofs_provider=ad), otherwise
+automountMapName
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>ldap_autofs_entry_object_class (string)</term>
+        <listitem>
+            <para>
+                The object class of an automount entry in LDAP. The entry usually
+corresponds to a mount point.
+            </para>
+            <para>
+                Default: nisObject (rfc2307, autofs_provider=ad), otherwise automount
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>ldap_autofs_entry_key (string)</term>
+        <listitem>
+            <para>
+                The key of an automount entry in LDAP. The entry usually corresponds to a
+mount point.
+            </para>
+            <para>
+                Default: cn (rfc2307, autofs_provider=ad), otherwise automountKey
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>ldap_autofs_entry_value (string)</term>
+        <listitem>
+            <para>
+                The key of an automount entry in LDAP. The entry usually corresponds to a
+mount point.
+            </para>
+            <para>
+                Default: nisMapEntry (rfc2307, autofs_provider=ad), otherwise
+automountInformation
+            </para>
+        </listitem>
+    </varlistentry>
+</variablelist>
diff --git a/src/man/eu/include/autofs_restart.xml b/src/man/eu/include/autofs_restart.xml
new file mode 100644
index 0000000..f31efe5
--- /dev/null
+++ b/src/man/eu/include/autofs_restart.xml
@@ -0,0 +1,5 @@
+<para>
+    Please note that the automounter only reads the master map on startup, so if
+any autofs-related changes are made to the sssd.conf, you typically also
+need to restart the automounter daemon after restarting the SSSD.
+</para>
diff --git a/src/man/eu/include/debug_levels.xml b/src/man/eu/include/debug_levels.xml
new file mode 100644
index 0000000..1f51573
--- /dev/null
+++ b/src/man/eu/include/debug_levels.xml
@@ -0,0 +1,97 @@
+<listitem>
+    <para>
+        SSSD supports two representations for specifying the debug level. The
+simplest is to specify a decimal value from 0-9, which represents enabling
+that level and all lower-level debug messages. The more comprehensive option
+is to specify a hexadecimal bitmask to enable or disable specific levels
+(such as if you wish to suppress a level).
+    </para>
+    <para>
+        Please note that each SSSD service logs into its own log file. Also please
+note that enabling <quote>debug_level</quote> in the <quote>[sssd]</quote>
+section only enables debugging just for the sssd process itself, not for the
+responder or provider processes. The <quote>debug_level</quote> parameter
+should be added to all sections that you wish to produce debug logs from.
+    </para>
+    <para>
+        In addition to changing the log level in the config file using the
+<quote>debug_level</quote> parameter, which is persistent, but requires SSSD
+restart, it is also possible to change the debug level on the fly using the
+<citerefentry> <refentrytitle>sss_debuglevel</refentrytitle>
+<manvolnum>8</manvolnum> </citerefentry> tool.
+    </para>
+    <para>
+        Currently supported debug levels:
+    </para>
+    <para>
+         <emphasis>0</emphasis>, <emphasis>0x0010</emphasis>: Fatal
+failures. Anything that would prevent SSSD from starting up or causes it to
+cease running.
+    </para>
+    <para>
+         <emphasis>1</emphasis>, <emphasis>0x0020</emphasis>: Critical failures. An
+error that doesn't kill SSSD, but one that indicates that at least one major
+feature is not going to work properly.
+    </para>
+    <para>
+         <emphasis>2</emphasis>, <emphasis>0x0040</emphasis>: Serious failures. An
+error announcing that a particular request or operation has failed.
+    </para>
+    <para>
+         <emphasis>3</emphasis>, <emphasis>0x0080</emphasis>: Minor failures. These
+are the errors that would percolate down to cause the operation failure of
+2.
+    </para>
+    <para>
+         <emphasis>4</emphasis>, <emphasis>0x0100</emphasis>: Configuration settings.
+    </para>
+    <para>
+         <emphasis>5</emphasis>, <emphasis>0x0200</emphasis>: Function data.
+    </para>
+    <para>
+         <emphasis>6</emphasis>, <emphasis>0x0400</emphasis>: Trace messages for
+operation functions.
+    </para>
+    <para>
+         <emphasis>7</emphasis>, <emphasis>0x1000</emphasis>: Trace messages for
+internal control functions.
+    </para>
+    <para>
+         <emphasis>8</emphasis>, <emphasis>0x2000</emphasis>: Contents of
+function-internal variables that may be interesting.
+    </para>
+    <para>
+         <emphasis>9</emphasis>, <emphasis>0x4000</emphasis>: Extremely low-level
+tracing information.
+    </para>
+    <para>
+         <emphasis>9</emphasis>, <emphasis>0x20000</emphasis>: Performance and
+statistical data, please note that due to the way requests are processed
+internally the logged execution time of a request might be longer than it
+actually was.
+    </para>
+    <para>
+         <emphasis>10</emphasis>, <emphasis>0x10000</emphasis>: Even more low-level
+libldb tracing information. Almost never really required.
+    </para>
+    <para>
+        To log required bitmask debug levels, simply add their numbers together as
+shown in following examples:
+    </para>
+    <para>
+        <emphasis>Example</emphasis>: To log fatal failures, critical failures,
+serious failures and function data use 0x0270.
+    </para>
+    <para>
+        <emphasis>Example</emphasis>: To log fatal failures, configuration settings,
+function data, trace messages for internal control functions use 0x1310.
+    </para>
+    <para>
+        <emphasis>Note</emphasis>: The bitmask format of debug levels was introduced
+in 1.7.0.
+    </para>
+    <para>
+        <emphasis>Default</emphasis>: 0x0070 (i.e. fatal, critical and serious
+failures; corresponds to setting 2 in decimal notation)
+    </para>
+</listitem>
diff --git a/src/man/eu/include/debug_levels_tools.xml b/src/man/eu/include/debug_levels_tools.xml
new file mode 100644
index 0000000..23f2f89
--- /dev/null
+++ b/src/man/eu/include/debug_levels_tools.xml
@@ -0,0 +1,77 @@
+<listitem>
+    <para>
+        SSSD supports two representations for specifying the debug level. The
+simplest is to specify a decimal value from 0-9, which represents enabling
+that level and all lower-level debug messages. The more comprehensive option
+is to specify a hexadecimal bitmask to enable or disable specific levels
+(such as if you wish to suppress a level).
+    </para>
+    <para>
+        Currently supported debug levels:
+    </para>
+    <para>
+         <emphasis>0</emphasis>, <emphasis>0x0010</emphasis>: Fatal
+failures. Anything that would prevent SSSD from starting up or causes it to
+cease running.
+    </para>
+    <para>
+         <emphasis>1</emphasis>, <emphasis>0x0020</emphasis>: Critical failures. An
+error that doesn't kill SSSD, but one that indicates that at least one major
+feature is not going to work properly.
+    </para>
+    <para>
+         <emphasis>2</emphasis>, <emphasis>0x0040</emphasis>: Serious failures. An
+error announcing that a particular request or operation has failed.
+    </para>
+    <para>
+         <emphasis>3</emphasis>, <emphasis>0x0080</emphasis>: Minor failures. These
+are the errors that would percolate down to cause the operation failure of
+2.
+    </para>
+    <para>
+         <emphasis>4</emphasis>, <emphasis>0x0100</emphasis>: Configuration settings.
+    </para>
+    <para>
+         <emphasis>5</emphasis>, <emphasis>0x0200</emphasis>: Function data.
+    </para>
+    <para>
+         <emphasis>6</emphasis>, <emphasis>0x0400</emphasis>: Trace messages for
+operation functions.
+    </para>
+    <para>
+         <emphasis>7</emphasis>, <emphasis>0x1000</emphasis>: Trace messages for
+internal control functions.
+    </para>
+    <para>
+         <emphasis>8</emphasis>, <emphasis>0x2000</emphasis>: Contents of
+function-internal variables that may be interesting.
+    </para>
+    <para>
+         <emphasis>9</emphasis>, <emphasis>0x4000</emphasis>: Extremely low-level
+tracing information.
+    </para>
+    <para>
+         <emphasis>10</emphasis>, <emphasis>0x10000</emphasis>: Even more low-level
+libldb tracing information. Almost never really required.
+    </para>
+    <para>
+        To log required bitmask debug levels, simply add their numbers together as
+shown in following examples:
+    </para>
+    <para>
+        <emphasis>Example</emphasis>: To log fatal failures, critical failures,
+serious failures and function data use 0x0270.
+    </para>
+    <para>
+        <emphasis>Example</emphasis>: To log fatal failures, configuration settings,
+function data, trace messages for internal control functions use 0x1310.
+    </para>
+    <para>
+        <emphasis>Note</emphasis>: The bitmask format of debug levels was introduced
+in 1.7.0.
+    </para>
+    <para>
+        <emphasis>Default</emphasis>: 0x0070 (i.e. fatal, critical and serious
+failures; corresponds to setting 2 in decimal notation)
+    </para>
+</listitem>
diff --git a/src/man/eu/include/failover.xml b/src/man/eu/include/failover.xml
new file mode 100644
index 0000000..c1835eb
--- /dev/null
+++ b/src/man/eu/include/failover.xml
@@ -0,0 +1,120 @@
+<refsect1 id='failover'>
+    <title>FAILOVER</title>
+    <para>
+        The failover feature allows back ends to automatically switch to a different
+server if the current server fails.
+    </para>
+    <refsect2 id='failover_syntax'>
+        <title>Failover Syntax</title>
+        <para>
+            The list of servers is given as a comma-separated list; any number of spaces
+is allowed around the comma. The servers are listed in order of
+preference. The list can contain any number of servers.
+        </para>
+        <para>
+            For each failover-enabled config option, two variants exist:
+<emphasis>primary</emphasis> and <emphasis>backup</emphasis>.  The idea is
+that servers in the primary list are preferred and backup servers are only
+searched if no primary servers can be reached. If a backup server is
+selected, a timeout of 31 seconds is set. After this timeout SSSD will
+periodically try to reconnect to one of the primary servers. If it succeeds,
+it will replace the current active (backup) server.
+        </para>
+    </refsect2>
+    <refsect2 id='failover_mechanism'>
+        <title>The Failover Mechanism</title>
+        <para>
+            The failover mechanism distinguishes between a machine and a service. The
+back end first tries to resolve the hostname of a given machine; if this
+resolution attempt fails, the machine is considered offline. No further
+attempts are made to connect to this machine for any other service. If the
+resolution attempt succeeds, the back end tries to connect to a service on
+this machine. If the service connection attempt fails, then only this
+particular service is considered offline and the back end automatically
+switches over to the next service.  The machine is still considered online
+and might still be tried for another service.
+        </para>
+        <para>
+            Further connection attempts are made to machines or services marked as
+offline after a specified period of time; this is currently hard coded to 30
+seconds.
+        </para>
+        <para>
+            If there are no more machines to try, the back end as a whole switches to
+offline mode, and then attempts to reconnect every 30 seconds.
+        </para>
+    </refsect2>
+    <refsect2 id='failover_tuning'>
+        <title>Failover time outs and tuning</title>
+        <para>
+            Resolving a server to connect to can be as simple as running a single DNS
+query or can involve several steps, such as finding the correct site or
+trying out multiple host names in case some of the configured servers are
+not reachable. The more complex scenarios can take some time and SSSD needs
+to balance between providing enough time to finish the resolution process
+but on the other hand, not trying for too long before falling back to
+offline mode. If the SSSD debug logs show that the server resolution is
+timing out before a live server is contacted, you can consider changing the
+time outs.
+        </para>
+        <para>
+            This section lists the available tunables. Please refer to their description
+in the <citerefentry>
+<refentrytitle>sssd.conf</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, manual page.  <variablelist>
+                <varlistentry>
+                    <term>
+                        dns_resolver_server_timeout
+                    </term>
+                    <listitem>
+                        <para>
+                            Time in milliseconds that sets how long would SSSD talk to a single DNS
+server before trying next one.
+                        </para>
+                        <para>
+                            Default: 1000
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>
+                        dns_resolver_op_timeout
+                    </term>
+                    <listitem>
+                        <para>
+                            Time in seconds to tell how long would SSSD try to resolve single DNS query
+(e.g. resolution of a hostname or an SRV record) before trying the next
+hostname or discovery domain.
+                        </para>
+                        <para>
+                            Default: 3
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>
+                        dns_resolver_timeout
+                    </term>
+                    <listitem>
+                        <para>
+                            How long would SSSD try to resolve a failover service. This service
+resolution internally might include several steps, such as resolving DNS SRV
+queries or locating the site.
+                        </para>
+                        <para>
+                            Default: 6
+                        </para>
+                    </listitem>
+                </varlistentry>
+            </variablelist>
+        </para>
+        <para>
+            For LDAP-based providers, the resolve operation is performed as part of an
+LDAP connection operation. Therefore, also the
+<quote>ldap_opt_timeout</quote> timeout should be set to a larger value than
+<quote>dns_resolver_timeout</quote> which in turn should be set to a larger
+value than <quote>dns_resolver_op_timeout</quote> which should be larger
+than <quote>dns_resolver_server_timeout</quote>.
+        </para>
+    </refsect2>
+</refsect1>
diff --git a/src/man/eu/include/homedir_substring.xml b/src/man/eu/include/homedir_substring.xml
new file mode 100644
index 0000000..d7533de
--- /dev/null
+++ b/src/man/eu/include/homedir_substring.xml
@@ -0,0 +1,17 @@
+<varlistentry>
+    <term>homedir_substring (string)</term>
+    <listitem>
+        <para>
+            The value of this option will be used in the expansion of the
+<emphasis>override_homedir</emphasis> option if the template contains the
+format string <emphasis>%H</emphasis>. An LDAP directory entry can directly
+contain this template so that this option can be used to expand the home
+directory path for each client machine (or operating system). It can be set
+per-domain or globally in the [nss] section. A value specified in a domain
+section will override one set in the [nss] section.
+        </para>
+        <para>
+            Default: /home
+        </para>
+    </listitem>
+</varlistentry>
diff --git a/src/man/eu/include/ipa_modified_defaults.xml b/src/man/eu/include/ipa_modified_defaults.xml
new file mode 100644
index 0000000..4ad4b45
--- /dev/null
+++ b/src/man/eu/include/ipa_modified_defaults.xml
@@ -0,0 +1,123 @@
+<refsect1 id='modified-default-options'>
+    <title>MODIFIED DEFAULT OPTIONS</title>
+    <para>
+        Certain option defaults do not match their respective backend provider
+defaults, these option names and IPA provider-specific defaults are listed
+below:
+    </para>
+    <refsect2 id='krb5_modifications'>
+        <title>KRB5 Provider</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    krb5_validate = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    krb5_use_fast = try
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    krb5_canonicalize = true
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+    <refsect2 id='ldap_general_modifications'>
+        <title>LDAP Provider - General</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    ldap_schema = ipa_v1
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_force_upper_case_realm = true
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_sasl_mech = GSSAPI
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_sasl_minssf = 56
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_account_expire_policy = ipa
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_use_tokengroups = true
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+    <refsect2 id='ldap_user_modifications'>
+        <title>LDAP Provider - User options</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    ldap_user_member_of = memberOf
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_user_uuid = ipaUniqueID
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_user_ssh_public_key = ipaSshPubKey
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_user_auth_type = ipaUserAuthType
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+    <refsect2 id='ldap_group_modifications'>
+        <title>LDAP Provider - Group options</title>
+        <itemizedlist>
+            <listitem>
+                <para>
+                    ldap_group_object_class = ipaUserGroup
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_group_object_class_alt = posixGroup
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_group_member = member
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_group_uuid = ipaUniqueID
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_group_objectsid = ipaNTSecurityIdentifier
+                </para>
+            </listitem>
+            <listitem>
+                <para>
+                    ldap_group_external_member = ipaExternalMember
+                </para>
+            </listitem>
+        </itemizedlist>
+    </refsect2>
+</refsect1>
diff --git a/src/man/eu/include/krb5_options.xml b/src/man/eu/include/krb5_options.xml
new file mode 100644
index 0000000..e13ba89
--- /dev/null
+++ b/src/man/eu/include/krb5_options.xml
@@ -0,0 +1,153 @@
+<variablelist>
+    <varlistentry>
+        <term>krb5_auth_timeout (integer)</term>
+        <listitem>
+            <para>
+                Timeout in seconds after an online authentication request or change password
+request is aborted. If possible, the authentication request is continued
+offline.
+            </para>
+            <para>
+                Default: 6
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>krb5_validate (boolean)</term>
+        <listitem>
+            <para>
+                Verify with the help of krb5_keytab that the TGT obtained has not been
+spoofed. The keytab is checked for entries sequentially, and the first entry
+with a matching realm is used for validation. If no entry matches the realm,
+the last entry in the keytab is used. This process can be used to validate
+environments using cross-realm trust by placing the appropriate keytab entry
+as the last entry or the only entry in the keytab file.
+            </para>
+            <para>
+                Default: false (IPA and AD provider: true)
+            </para>
+            <para>
+                Please note that the ticket validation is the first step when checking the
+PAC (see 'pac_check' in the <citerefentry>
+<refentrytitle>sssd.conf</refentrytitle> <manvolnum>5</manvolnum>
+</citerefentry> manual page for details). If ticket validation is disabled
+the PAC checks will be skipped as well.
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>krb5_renewable_lifetime (string)</term>
+        <listitem>
+            <para>
+                Request a renewable ticket with a total lifetime, given as an integer
+immediately followed by a time unit:
+            </para>
+            <para>
+                <emphasis>s</emphasis> for seconds
+            </para>
+            <para>
+                <emphasis>m</emphasis> for minutes
+            </para>
+            <para>
+                <emphasis>h</emphasis> for hours
+            </para>
+            <para>
+                <emphasis>d</emphasis> for days.
+            </para>
+            <para>
+                If there is no unit given, <emphasis>s</emphasis> is assumed.
+            </para>
+            <para>
+                NOTE: It is not possible to mix units.  To set the renewable lifetime to one
+and a half hours, use '90m' instead of '1h30m'.
+            </para>
+            <para>
+                Default: not set, i.e. the TGT is not renewable
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>krb5_lifetime (string)</term>
+        <listitem>
+            <para>
+                Request ticket with a lifetime, given as an integer immediately followed by
+a time unit:
+            </para>
+            <para>
+                <emphasis>s</emphasis> for seconds
+            </para>
+            <para>
+                <emphasis>m</emphasis> for minutes
+            </para>
+            <para>
+                <emphasis>h</emphasis> for hours
+            </para>
+            <para>
+                <emphasis>d</emphasis> for days.
+            </para>
+            <para>
+                If there is no unit given <emphasis>s</emphasis> is assumed.
+            </para>
+            <para>
+                NOTE: It is not possible to mix units.  To set the lifetime to one and a
+half hours please use '90m' instead of '1h30m'.
+            </para>
+            <para>
+                Default: not set, i.e. the default ticket lifetime configured on the KDC.
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>krb5_renew_interval (string)</term>
+        <listitem>
+            <para>
+                The time in seconds between two checks if the TGT should be renewed. TGTs
+are renewed if about half of their lifetime is exceeded, given as an integer
+immediately followed by a time unit:
+            </para>
+            <para>
+                <emphasis>s</emphasis> for seconds
+            </para>
+            <para>
+                <emphasis>m</emphasis> for minutes
+            </para>
+            <para>
+                <emphasis>h</emphasis> for hours
+            </para>
+            <para>
+                <emphasis>d</emphasis> for days.
+            </para>
+            <para>
+                If there is no unit given, <emphasis>s</emphasis> is assumed.
+            </para>
+            <para>
+                NOTE: It is not possible to mix units.  To set the renewable lifetime to one
+and a half hours, use '90m' instead of '1h30m'.
+            </para>
+            <para>
+                 If this option is not set or is 0 the automatic renewal is disabled.
+            </para>
+            <para>
+                Default: not set
+            </para>
+        </listitem>
+    </varlistentry>
+
+    <varlistentry>
+        <term>krb5_canonicalize (boolean)</term>
+        <listitem>
+            <para>
+                Specifies if the host and user principal should be canonicalized. This
+feature is available with MIT Kerberos 1.7 and later versions.
+            </para>
+
+            <para>
+                Default: false
+            </para>
+        </listitem>
+    </varlistentry>
+</variablelist>
diff --git a/src/man/eu/include/ldap_id_mapping.xml b/src/man/eu/include/ldap_id_mapping.xml
new file mode 100644
index 0000000..f80be8d
--- /dev/null
+++ b/src/man/eu/include/ldap_id_mapping.xml
@@ -0,0 +1,284 @@
+<refsect1 id='idmap'>
+    <title>ID MAPPING</title>
+    <para>
+        The ID-mapping feature allows SSSD to act as a client of Active Directory
+without requiring administrators to extend user attributes to support POSIX
+attributes for user and group identifiers.
+    </para>
+    <para>
+        NOTE: When ID-mapping is enabled, the uidNumber and gidNumber attributes are
+ignored. This is to avoid the possibility of conflicts between
+automatically-assigned and manually-assigned values. If you need to use
+manually-assigned values, ALL values must be manually-assigned.
+    </para>
+    <para>
+        Please note that changing the ID mapping related configuration options will
+cause user and group IDs to change. At the moment, SSSD does not support
+changing IDs, so the SSSD database must be removed. Because cached passwords
+are also stored in the database, removing the database should only be
+performed while the authentication servers are reachable, otherwise users
+might get locked out. In order to cache the password, an authentication must
+be performed. It is not sufficient to use <citerefentry>
+<refentrytitle>sss_cache</refentrytitle> <manvolnum>8</manvolnum>
+</citerefentry> to remove the database, rather the process consists of:
+            <itemizedlist>
+                <listitem>
+                    <para>
+                        Making sure the remote servers are reachable
+                    </para>
+                </listitem>
+                <listitem>
+                    <para>
+                        Stopping the SSSD service
+                    </para>
+                </listitem>
+                <listitem>
+                    <para>
+                        Removing the database
+                    </para>
+                </listitem>
+                <listitem>
+                    <para>
+                        Starting the SSSD service
+                    </para>
+                </listitem>
+            </itemizedlist>
+        Moreover, as the change of IDs might necessitate the adjustment of other
+system properties such as file and directory ownership, it's advisable to
+plan ahead and test the ID mapping configuration thoroughly.
+    </para>
+
+    <refsect2 id='idmap_algorithm'>
+        <title>Mapping Algorithm</title>
+        <para>
+            Active Directory provides an objectSID for every user and group object in
+the directory. This objectSID can be broken up into components that
+represent the Active Directory domain identity and the relative identifier
+(RID) of the user or group object.
+        </para>
+        <para>
+            The SSSD ID-mapping algorithm takes a range of available UIDs and divides it
+into equally-sized component sections - called "slices"-. Each slice
+represents the space available to an Active Directory domain.
+        </para>
+        <para>
+            When a user or group entry for a particular domain is encountered for the
+first time, the SSSD allocates one of the available slices for that
+domain. In order to make this slice-assignment repeatable on different
+client machines, we select the slice based on the following algorithm:
+        </para>
+        <para>
+            The SID string is passed through the murmurhash3 algorithm to convert it to
+a 32-bit hashed value. We then take the modulus of this value with the total
+number of available slices to pick the slice.
+        </para>
+        <para>
+            NOTE: It is possible to encounter collisions in the hash and subsequent
+modulus. In these situations, we will select the next available slice, but
+it may not be possible to reproduce the same exact set of slices on other
+machines (since the order that they are encountered will determine their
+slice). In this situation, it is recommended to either switch to using
+explicit POSIX attributes in Active Directory (disabling ID-mapping) or
+configure a default domain to guarantee that at least one is always
+consistent. See <quote>Configuration</quote> for details.
+        </para>
+    </refsect2>
+
+    <refsect2 id='idmap_config'>
+        <title>Configuration</title>
+        <para>
+            Minimum configuration (in the <quote>[domain/DOMAINNAME]</quote> section):
+        </para>
+        <para>
+<programlisting>
+ldap_id_mapping = True
+ldap_schema = ad
+</programlisting>
+        </para>
+        <para>
+            The default configuration results in configuring 10,000 slices, each capable
+of holding up to 200,000 IDs, starting from 200,000 and going up to
+2,000,200,000. This should be sufficient for most deployments.
+        </para>
+        <refsect3 id='idmap_advanced_config'>
+            <title>Advanced Configuration</title>
+            <variablelist>
+                <varlistentry>
+                    <term>ldap_idmap_range_min (integer)</term>
+                    <listitem>
+                        <para>
+                            Specifies the lower (inclusive) bound of the range of POSIX IDs to use for
+mapping Active Directory user and group SIDs. It is the first POSIX ID which
+can be used for the mapping.
+                        </para>
+                        <para>
+                            NOTE: This option is different from <quote>min_id</quote> in that
+<quote>min_id</quote> acts to filter the output of requests to this domain,
+whereas this option controls the range of ID assignment. This is a subtle
+distinction, but the good general advice would be to have
+<quote>min_id</quote> be less-than or equal to
+<quote>ldap_idmap_range_min</quote>
+                        </para>
+                        <para>
+                            Default: 200000
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_range_max (integer)</term>
+                    <listitem>
+                        <para>
+                            Specifies the upper (exclusive) bound of the range of POSIX IDs to use for
+mapping Active Directory user and group SIDs. It is the first POSIX ID which
+cannot be used for the mapping anymore, i.e. one larger than the last one
+which can be used for the mapping.
+                        </para>
+                        <para>
+                            NOTE: This option is different from <quote>max_id</quote> in that
+<quote>max_id</quote> acts to filter the output of requests to this domain,
+whereas this option controls the range of ID assignment. This is a subtle
+distinction, but the good general advice would be to have
+<quote>max_id</quote> be greater-than or equal to
+<quote>ldap_idmap_range_max</quote>
+                        </para>
+                        <para>
+                            Default: 2000200000
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_range_size (integer)</term>
+                    <listitem>
+                        <para>
+                            Specifies the number of IDs available for each slice.  If the range size
+does not divide evenly into the min and max values, it will create as many
+complete slices as it can.
+                        </para>
+                        <para>
+                            NOTE: The value of this option must be at least as large as the highest user
+RID planned for use on the Active Directory server. User lookups and login
+will fail for any user whose RID is greater than this value.
+                        </para>
+                        <para>
+                            For example, if your most recently-added Active Directory user has
+objectSid=S-1-5-21-2153326666-2176343378-3404031434-1107,
+<quote>ldap_idmap_range_size</quote> must be at least 1108 as range size is
+equal to maximal SID minus minimal SID plus one (e.g. 1108 = 1107 - 0 + 1).
+                        </para>
+                        <para>
+                            It is important to plan ahead for future expansion, as changing this value
+will result in changing all of the ID mappings on the system, leading to
+users with different local IDs than they previously had.
+                        </para>
+                        <para>
+                            Default: 200000
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_default_domain_sid (string)</term>
+                    <listitem>
+                        <para>
+                            Specify the domain SID of the default domain. This will guarantee that this
+domain will always be assigned to slice zero in the ID map, bypassing the
+murmurhash algorithm described above.
+                        </para>
+                        <para>
+                            Default: not set
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_default_domain (string)</term>
+                    <listitem>
+                        <para>
+                            Specify the name of the default domain.
+                        </para>
+                        <para>
+                            Default: not set
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_autorid_compat (boolean)</term>
+                    <listitem>
+                        <para>
+                            Changes the behavior of the ID-mapping algorithm to behave more similarly to
+winbind's <quote>idmap_autorid</quote> algorithm.
+                        </para>
+                        <para>
+                            When this option is configured, domains will be allocated starting with
+slice zero and increasing monotonically with each additional domain.
+                        </para>
+                        <para>
+                            NOTE: This algorithm is non-deterministic (it depends on the order that
+users and groups are requested). If this mode is required for compatibility
+with machines running winbind, it is recommended to also use the
+<quote>ldap_idmap_default_domain_sid</quote> option to guarantee that at
+least one domain is consistently allocated to slice zero.
+                        </para>
+                        <para>
+                            Default: False
+                        </para>
+                    </listitem>
+                </varlistentry>
+                <varlistentry>
+                    <term>ldap_idmap_helper_table_size (integer)</term>
+                    <listitem>
+                        <para>
+                          Maximal number of secondary slices that is tried when performing mapping
+from UNIX id to SID.
+                        </para>
+                        <para>
+                          Note: Additional secondary slices might be generated when SID is being
+mapped to UNIX id and RID part of SID is out of range for secondary slices
+generated so far. If value of ldap_idmap_helper_table_size is equal to 0
+then no additional secondary slices are generated.
+                        </para>
+                        <para>
+                            Default: 10
+                        </para>
+                    </listitem>
+                </varlistentry>
+            </variablelist>
+        </refsect3>
+    </refsect2>
+
+    <refsect2 id='well_known_sids'>
+        <title>Well-Known SIDs</title>
+        <para>
+            SSSD supports to look up the names of Well-Known SIDs, i.e. SIDs with a
+special hardcoded meaning. Since the generic users and groups related to
+those Well-Known SIDs have no equivalent in a Linux/UNIX environment no
+POSIX IDs are available for those objects.
+        </para>
+        <para>
+            The SID name space is organized in authorities which can be seen as
+different domains. The authorities for the Well-Known SIDs are
+            <itemizedlist>
+                <listitem><para>Null Authority</para></listitem>
+                <listitem><para>World Authority</para></listitem>
+                <listitem><para>Local Authority</para></listitem>
+                <listitem><para>Creator Authority</para></listitem>
+                <listitem><para>Mandatory Label Authority</para></listitem>
+                <listitem><para>Authentication Authority</para></listitem>
+                <listitem><para>NT Authority</para></listitem>
+                <listitem><para>Built-in</para></listitem>
+            </itemizedlist>
+            The capitalized version of these names are used as domain names when
+returning the fully qualified name of a Well-Known SID.
+        </para>
+        <para>
+            Since some utilities allow to modify SID based access control information
+with the help of a name instead of using the SID directly SSSD supports to
+look up the SID by the name as well. To avoid collisions only the fully
+qualified names can be used to look up Well-Known SIDs. As a result the
+domain names <quote>NULL AUTHORITY</quote>, <quote>WORLD AUTHORITY</quote>,
+<quote>LOCAL AUTHORITY</quote>, <quote>CREATOR AUTHORITY</quote>,
+<quote>MANDATORY LABEL AUTHORITY</quote>, <quote>AUTHENTICATION
+AUTHORITY</quote>, <quote>NT AUTHORITY</quote> and <quote>BUILTIN</quote>
+should not be used as domain names in <filename>sssd.conf</filename>.
+        </para>
+    </refsect2>
+
+</refsect1>
diff --git a/src/man/eu/include/ldap_search_bases.xml b/src/man/eu/include/ldap_search_bases.xml
new file mode 100644
index 0000000..189f862
--- /dev/null
+++ b/src/man/eu/include/ldap_search_bases.xml
@@ -0,0 +1,31 @@
+<listitem>
+    <para>
+        An optional base DN, search scope and LDAP filter to restrict LDAP searches
+for this attribute type.
+    </para>
+    <para>
+        syntax: <programlisting>
+search_base[?scope?[filter][?search_base?scope?[filter]]*]
+</programlisting>
+    </para>
+    <para>
+        The scope can be one of "base", "onelevel" or "subtree". The scope functions
+as specified in section 4.5.1.2 of http://tools.ietf.org/html/rfc4511
+    </para>
+    <para>
+        The filter must be a valid LDAP search filter as specified by
+http://www.ietf.org/rfc/rfc2254.txt
+    </para>
+    <para>
+        For examples of this syntax, please refer to the
+<quote>ldap_search_base</quote> examples section.
+    </para>
+    <para>
+        Default: the value of <emphasis>ldap_search_base</emphasis>
+    </para>
+    <para>
+        Please note that specifying scope or filter is not supported for searches
+against an Active Directory Server that might yield a large number of
+results and trigger the Range Retrieval extension in the response.
+    </para>
+</listitem>
diff --git a/src/man/eu/include/local.xml b/src/man/eu/include/local.xml
new file mode 100644
index 0000000..ce849a3
--- /dev/null
+++ b/src/man/eu/include/local.xml
@@ -0,0 +1,17 @@
+<refsect1 id='local'>
+    <title>THE LOCAL DOMAIN</title>
+    <para>
+        In order to function correctly, a domain with
+<quote>id_provider=local</quote> must be created and the SSSD must be
+running.
+    </para>
+    <para>
+        The administrator might want to use the SSSD local users instead of
+traditional UNIX users in cases where the group nesting (see <citerefentry>
+<refentrytitle>sss_groupadd</refentrytitle> <manvolnum>8</manvolnum>
+</citerefentry>) is needed. The local users are also useful for testing and
+development of the SSSD without having to deploy a full remote server. The
+<command>sss_user*</command> and <command>sss_group*</command> tools use a
+local LDB storage to store users and groups.
+    </para>
+</refsect1>
diff --git a/src/man/eu/include/override_homedir.xml b/src/man/eu/include/override_homedir.xml
new file mode 100644
index 0000000..68a1c5e
--- /dev/null
+++ b/src/man/eu/include/override_homedir.xml
@@ -0,0 +1,78 @@
+<varlistentry>
+<term>override_homedir (string)</term>
+<listitem>
+    <para>
+        Override the user's home directory. You can either provide an absolute value
+or a template. In the template, the following sequences are substituted:
+<variablelist>
+            <varlistentry>
+                <term>%u</term>
+                <listitem><para>login name</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%U</term>
+                <listitem><para>UID number</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%d</term>
+                <listitem><para>domain name</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%f</term>
+                <listitem><para>fully qualified user name (user@domain)</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%l</term>
+                <listitem><para>The first letter of the login name.</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%P</term>
+                <listitem><para>UPN - User Principal Name (name@REALM)</para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%o</term>
+                <listitem><para>
+                    The original home directory retrieved from the identity provider.
+                    </para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%h</term>
+                <listitem><para>
+                    The original home directory retrieved from the identity provider, but in
+lower case.
+                    </para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%H</term>
+                <listitem><para>
+                    The value of configure option <emphasis>homedir_substring</emphasis>.
+                    </para></listitem>
+            </varlistentry>
+            <varlistentry>
+                <term>%%</term>
+                <listitem><para>a literal '%'</para>
+                </listitem>
+            </varlistentry>
+        </variablelist>
+    </para>
+    <para>
+        This option can also be set per-domain.
+    </para>
+    <para>
+        example: <programlisting>
+override_homedir = /home/%u
+        </programlisting>
+    </para>
+    <para>
+        Default: Not set (SSSD will use the value retrieved from LDAP)
+    </para>
+    <para>
+        Please note, the home directory from a specific override for the user,
+either locally (see
+<citerefentry><refentrytitle>sss_override</refentrytitle>
+<manvolnum>8</manvolnum></citerefentry>) or centrally managed IPA
+id-overrides, has a higher precedence and will be used instead of the value
+given by override_homedir.
+    </para>
+</listitem>
+</varlistentry>
diff --git a/src/man/eu/include/param_help.xml b/src/man/eu/include/param_help.xml
new file mode 100644
index 0000000..d28020b
--- /dev/null
+++ b/src/man/eu/include/param_help.xml
@@ -0,0 +1,10 @@
+<varlistentry>
+    <term>
+        <option>-?</option>,<option>--help</option>
+    </term>
+    <listitem>
+        <para>
+            Display help message and exit.
+        </para>
+    </listitem>
+</varlistentry>
diff --git a/src/man/eu/include/param_help_py.xml b/src/man/eu/include/param_help_py.xml
new file mode 100644
index 0000000..a2478bf
--- /dev/null
+++ b/src/man/eu/include/param_help_py.xml
@@ -0,0 +1,10 @@
+<varlistentry>
+    <term>
+        <option>-h</option>,<option>--help</option>
+    </term>
+    <listitem>
+        <para>
+            Display help message and exit.
+        </para>
+    </listitem>
+</varlistentry>
diff --git a/src/man/eu/include/seealso.xml b/src/man/eu/include/seealso.xml
new file mode 100644
index 0000000..1a8ed32
--- /dev/null
+++ b/src/man/eu/include/seealso.xml
@@ -0,0 +1,49 @@
+    <refsect1 id='see_also'>
+        <title>SEE ALSO</title>
+        <para>
+            <citerefentry> <refentrytitle>sssd</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd.conf</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-ldap</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-ldap-attributes</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-krb5</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-simple</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-ipa</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd-ad</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, <phrase condition="with_files_provider"> <citerefentry>
+<refentrytitle>sssd-files</refentrytitle><manvolnum>5</manvolnum>
+</citerefentry>, </phrase> <phrase condition="with_sudo"> <citerefentry>
+<refentrytitle>sssd-sudo</refentrytitle> <manvolnum>5</manvolnum>
+</citerefentry>, </phrase> <citerefentry>
+<refentrytitle>sssd-session-recording</refentrytitle>
+<manvolnum>5</manvolnum> </citerefentry>, <citerefentry>
+<refentrytitle>sss_cache</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sss_debuglevel</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sss_obfuscate</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sss_seed</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <citerefentry>
+<refentrytitle>sssd_krb5_locator_plugin</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>, <phrase condition="with_ssh"> <citerefentry>
+<refentrytitle>sss_ssh_authorizedkeys</refentrytitle>
+<manvolnum>8</manvolnum> </citerefentry>, <citerefentry>
+<refentrytitle>sss_ssh_knownhostsproxy</refentrytitle>
+<manvolnum>8</manvolnum> </citerefentry>, </phrase> <phrase
+condition="with_ifp"> <citerefentry> <refentrytitle>sssd-ifp</refentrytitle>
+<manvolnum>5</manvolnum> </citerefentry>, </phrase> <citerefentry>
+<refentrytitle>pam_sss</refentrytitle><manvolnum>8</manvolnum>
+</citerefentry>.  <citerefentry>
+<refentrytitle>sss_rpcidmapd</refentrytitle> <manvolnum>5</manvolnum>
+</citerefentry> <phrase condition="with_stap"> <citerefentry>
+<refentrytitle>sssd-systemtap</refentrytitle> <manvolnum>5</manvolnum>
+</citerefentry> </phrase>
+        </para>
+    </refsect1>
diff --git a/src/man/eu/include/service_discovery.xml b/src/man/eu/include/service_discovery.xml
new file mode 100644
index 0000000..2e417a9
--- /dev/null
+++ b/src/man/eu/include/service_discovery.xml
@@ -0,0 +1,41 @@
+<refsect1 id='service_discovery'>
+    <title>SERVICE DISCOVERY</title>
+    <para>
+        The service discovery feature allows back ends to automatically find the
+appropriate servers to connect to using a special DNS query. This feature is
+not supported for backup servers.
+    </para>
+    <refsect2 id='configuration'>
+        <title>Configuration</title>
+        <para>
+            If no servers are specified, the back end automatically uses service
+discovery to try to find a server. Optionally, the user may choose to use
+both fixed server addresses and service discovery by inserting a special
+keyword, <quote>_srv_</quote>, in the list of servers. The order of
+preference is maintained. This feature is useful if, for example, the user
+prefers to use service discovery whenever possible, and fall back to a
+specific server when no servers can be discovered using DNS.
+        </para>
+    </refsect2>
+    <refsect2 id='domain_name'>
+        <title>The domain name</title>
+        <para>
+            Please refer to the <quote>dns_discovery_domain</quote> parameter in the
+<citerefentry> <refentrytitle>sssd.conf</refentrytitle>
+<manvolnum>5</manvolnum> </citerefentry> manual page for more details.
+        </para>
+    </refsect2>
+    <refsect2 id='search_protocol'>
+        <title>The protocol</title>
+        <para>
+            The queries usually specify _tcp as the protocol. Exceptions are documented
+in respective option description.
+        </para>
+    </refsect2>
+    <refsect2 id='reference'>
+        <title>See Also</title>
+        <para>
+            For more information on the service discovery mechanism, refer to RFC 2782.
+        </para>
+    </refsect2>
+</refsect1>
diff --git a/src/man/eu/include/upstream.xml b/src/man/eu/include/upstream.xml
new file mode 100644
index 0000000..2a4ad16
--- /dev/null
+++ b/src/man/eu/include/upstream.xml
@@ -0,0 +1,3 @@
+<refentryinfo>
+<productname>SSSD</productname> <orgname>The SSSD upstream -
+https://github.com/SSSD/sssd/</orgname></refentryinfo>