summaryrefslogtreecommitdiffstats
path: root/docs/CGROUP_DELEGATION.md
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-10 20:49:52 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-10 20:49:52 +0000
commit55944e5e40b1be2afc4855d8d2baf4b73d1876b5 (patch)
tree33f869f55a1b149e9b7c2b7e201867ca5dd52992 /docs/CGROUP_DELEGATION.md
parentInitial commit. (diff)
downloadsystemd-55944e5e40b1be2afc4855d8d2baf4b73d1876b5.tar.xz
systemd-55944e5e40b1be2afc4855d8d2baf4b73d1876b5.zip
Adding upstream version 255.4.upstream/255.4
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'docs/CGROUP_DELEGATION.md')
-rw-r--r--docs/CGROUP_DELEGATION.md502
1 files changed, 502 insertions, 0 deletions
diff --git a/docs/CGROUP_DELEGATION.md b/docs/CGROUP_DELEGATION.md
new file mode 100644
index 0000000..4210a75
--- /dev/null
+++ b/docs/CGROUP_DELEGATION.md
@@ -0,0 +1,502 @@
+---
+title: Control Group APIs and Delegation
+category: Interfaces
+layout: default
+SPDX-License-Identifier: LGPL-2.1-or-later
+---
+
+# Control Group APIs and Delegation
+
+*Intended audience: hackers working on userspace subsystems that require direct
+cgroup access, such as container managers and similar.*
+
+So you are wondering about resource management with systemd, you know Linux
+control groups (cgroups) a bit and are trying to integrate your software with
+what systemd has to offer there. Here's a bit of documentation about the
+concepts and interfaces involved with this.
+
+What's described here has been part of systemd and documented since v205
+times. However, it has been updated and improved substantially, even
+though the concepts stayed mostly the same. This is an attempt to provide more
+comprehensive up-to-date information about all this, particular in light of the
+poor implementations of the components interfacing with systemd of current
+container managers.
+
+Before you read on, please make sure you read the low-level kernel
+documentation about the
+[unified cgroup hierarchy](https://docs.kernel.org/admin-guide/cgroup-v2.html).
+This document then adds in the higher-level view from systemd.
+
+This document augments the existing documentation we already have:
+
+* [The New Control Group Interfaces](https://www.freedesktop.org/wiki/Software/systemd/ControlGroupInterface)
+* [Writing VM and Container Managers](https://www.freedesktop.org/wiki/Software/systemd/writing-vm-managers)
+
+These wiki documents are not as up to date as they should be, currently, but
+the basic concepts still fully apply. You should read them too, if you do something
+with cgroups and systemd, in particular as they shine more light on the various
+D-Bus APIs provided. (That said, sooner or later we should probably fold that
+wiki documentation into this very document, too.)
+
+## Two Key Design Rules
+
+Much of the philosophy behind these concepts is based on a couple of basic
+design ideas of cgroup v2 (which we however try to adapt as far as we can to
+cgroup v1 too). Specifically two cgroup v2 rules are the most relevant:
+
+1. The **no-processes-in-inner-nodes** rule: this means that it's not permitted
+to have processes directly attached to a cgroup that also has child cgroups and
+vice versa. A cgroup is either an inner node or a leaf node of the tree, and if
+it's an inner node it may not contain processes directly, and if it's a leaf
+node then it may not have child cgroups. (Note that there are some minor
+exceptions to this rule, though. E.g. the root cgroup is special and allows
+both processes and children — which is used in particular to maintain kernel
+threads.)
+
+2. The **single-writer** rule: this means that each cgroup only has a single
+writer, i.e. a single process managing it. It's OK if different cgroups have
+different processes managing them. However, only a single process should own a
+specific cgroup, and when it does that ownership is exclusive, and nothing else
+should manipulate it at the same time. This rule ensures that various pieces of
+software don't step on each other's toes constantly.
+
+These two rules have various effects. For example, one corollary of this is: if
+your container manager creates and manages cgroups in the system's root cgroup
+you violate rule #2, as the root cgroup is managed by systemd and hence off
+limits to everybody else.
+
+Note that rule #1 is generally enforced by the kernel if cgroup v2 is used: as
+soon as you add a process to a cgroup it is ensured the rule is not
+violated. On cgroup v1 this rule didn't exist, and hence isn't enforced, even
+though it's a good thing to follow it then too. Rule #2 is not enforced on
+either cgroup v1 nor cgroup v2 (this is UNIX after all, in the general case
+root can do anything, modulo SELinux and friends), but if you ignore it you'll
+be in constant pain as various pieces of software will fight over cgroup
+ownership.
+
+Note that cgroup v1 is currently the most deployed implementation, even though
+it's semantically broken in many ways, and in many cases doesn't actually do
+what people think it does. cgroup v2 is where things are going, and most new
+kernel features in this area are only added to cgroup v2, and not cgroup v1
+anymore. For example, cgroup v2 provides proper cgroup-empty notifications, has
+support for all kinds of per-cgroup BPF magic, supports secure delegation of
+cgroup trees to less privileged processes and so on, which all are not
+available on cgroup v1.
+
+## Three Different Tree Setups 🌳
+
+systemd supports three different modes how cgroups are set up. Specifically:
+
+1. **Unified** — this is the simplest mode, and exposes a pure cgroup v2
+logic. In this mode `/sys/fs/cgroup` is the only mounted cgroup API file system
+and all available controllers are exclusively exposed through it.
+
+2. **Legacy** — this is the traditional cgroup v1 mode. In this mode the
+various controllers each get their own cgroup file system mounted to
+`/sys/fs/cgroup/<controller>/`. On top of that systemd manages its own cgroup
+hierarchy for managing purposes as `/sys/fs/cgroup/systemd/`.
+
+3. **Hybrid** — this is a hybrid between the unified and legacy mode. It's set
+up mostly like legacy, except that there's also an additional hierarchy
+`/sys/fs/cgroup/unified/` that contains the cgroup v2 hierarchy. (Note that in
+this mode the unified hierarchy won't have controllers attached, the
+controllers are all mounted as separate hierarchies as in legacy mode,
+i.e. `/sys/fs/cgroup/unified/` is purely and exclusively about core cgroup v2
+functionality and not about resource management.) In this mode compatibility
+with cgroup v1 is retained while some cgroup v2 features are available
+too. This mode is a stopgap. Don't bother with this too much unless you have
+too much free time.
+
+To say this clearly, legacy and hybrid modes have no future. If you develop
+software today and don't focus on the unified mode, then you are writing
+software for yesterday, not tomorrow. They are primarily supported for
+compatibility reasons and will not receive new features. Sorry.
+
+Superficially, in legacy and hybrid modes it might appear that the parallel
+cgroup hierarchies for each controller are orthogonal from each other. In
+systemd they are not: the hierarchies of all controllers are always kept in
+sync (at least mostly: sub-trees might be suppressed in certain hierarchies if
+no controller usage is required for them). The fact that systemd keeps these
+hierarchies in sync means that the legacy and hybrid hierarchies are
+conceptually very close to the unified hierarchy. In particular this allows us
+to talk of one specific cgroup and actually mean the same cgroup in all
+available controller hierarchies. E.g. if we talk about the cgroup `/foo/bar/`
+then we actually mean `/sys/fs/cgroup/cpu/foo/bar/` as well as
+`/sys/fs/cgroup/memory/foo/bar/`, `/sys/fs/cgroup/pids/foo/bar/`, and so on.
+Note that in cgroup v2 the controller hierarchies aren't orthogonal, hence
+thinking about them as orthogonal won't help you in the long run anyway.
+
+If you wonder how to detect which of these three modes is currently used, use
+`statfs()` on `/sys/fs/cgroup/`. If it reports `CGROUP2_SUPER_MAGIC` in its
+`.f_type` field, then you are in unified mode. If it reports `TMPFS_MAGIC` then
+you are either in legacy or hybrid mode. To distinguish these two cases, run
+`statfs()` again on `/sys/fs/cgroup/unified/`. If that succeeds and reports
+`CGROUP2_SUPER_MAGIC` you are in hybrid mode, otherwise not.
+From a shell, you can check the `Type` in `stat -f /sys/fs/cgroup` and
+`stat -f /sys/fs/cgroup/unified`.
+
+## systemd's Unit Types
+
+The low-level kernel cgroups feature is exposed in systemd in three different
+"unit" types. Specifically:
+
+1. 💼 The `.service` unit type. This unit type is for units encapsulating
+ processes systemd itself starts. Units of these types have cgroups that are
+ the leaves of the cgroup tree the systemd instance manages (though possibly
+ they might contain a sub-tree of their own managed by something else, made
+ possible by the concept of delegation, see below). Service units are usually
+ instantiated based on a unit file on disk that describes the command line to
+ invoke and other properties of the service. However, service units may also
+ be declared and started programmatically at runtime through a D-Bus API
+ (which is called *transient* services).
+
+2. 👓 The `.scope` unit type. This is very similar to `.service`. The main
+ difference: the processes the units of this type encapsulate are forked off
+ by some unrelated manager process, and that manager asked systemd to expose
+ them as a unit. Unlike services, scopes can only be declared and started
+ programmatically, i.e. are always transient. That's because they encapsulate
+ processes forked off by something else, i.e. existing runtime objects, and
+ hence cannot really be defined fully in 'offline' concepts such as unit
+ files.
+
+3. 🔪 The `.slice` unit type. Units of this type do not directly contain any
+ processes. Units of this type are the inner nodes of part of the cgroup tree
+ the systemd instance manages. Much like services, slices can be defined
+ either on disk with unit files or programmatically as transient units.
+
+Slices expose the trunk and branches of a tree, and scopes and services are
+attached to those branches as leaves. The idea is that scopes and services can
+be moved around though, i.e. assigned to a different slice if needed.
+
+The naming of slice units directly maps to the cgroup tree path. This is not
+the case for service and scope units however. A slice named `foo-bar-baz.slice`
+maps to a cgroup `/foo.slice/foo-bar.slice/foo-bar-baz.slice/`. A service
+`quux.service` which is attached to the slice `foo-bar-baz.slice` maps to the
+cgroup `/foo.slice/foo-bar.slice/foo-bar-baz.slice/quux.service/`.
+
+By default systemd sets up four slice units:
+
+1. `-.slice` is the root slice. i.e. the parent of everything else. On the host
+ system it maps directly to the top-level directory of cgroup v2.
+
+2. `system.slice` is where system services are by default placed, unless
+ configured otherwise.
+
+3. `user.slice` is where user sessions are placed. Each user gets a slice of
+ its own below that.
+
+4. `machines.slice` is where VMs and containers are supposed to be
+ placed. `systemd-nspawn` makes use of this by default, and you're very welcome
+ to place your containers and VMs there too if you hack on managers for those.
+
+Users may define any amount of additional slices they like though, the four
+above are just the defaults.
+
+## Delegation
+
+Container managers and suchlike often want to control cgroups directly using
+the raw kernel APIs. That's entirely fine and supported, as long as proper
+*delegation* is followed. Delegation is a concept we inherited from cgroup v2,
+but we expose it on cgroup v1 too. Delegation means that some parts of the
+cgroup tree may be managed by different managers than others. As long as it is
+clear which manager manages which part of the tree each one can do within its
+sub-graph of the tree whatever it wants.
+
+Only sub-trees can be delegated (though whoever decides to request a sub-tree
+can delegate sub-sub-trees further to somebody else if they like). Delegation
+takes place at a specific cgroup: in systemd there's a `Delegate=` property you
+can set for a service or scope unit. If you do, it's the cut-off point for
+systemd's cgroup management: the unit itself is managed by systemd, i.e. all
+its attributes are managed exclusively by systemd, however your program may
+create/remove sub-cgroups inside it freely, and those then become exclusive
+property of your program, systemd won't touch them — all attributes of *those*
+sub-cgroups can be manipulated freely and exclusively by your program.
+
+By turning on the `Delegate=` property for a scope or service you get a few
+guarantees:
+
+1. systemd won't fiddle with your sub-tree of the cgroup tree anymore. It won't
+ change attributes of any cgroups below it, nor will it create or remove any
+ cgroups thereunder, nor migrate processes across the boundaries of that
+ sub-tree as it deems useful anymore.
+
+2. If your service makes use of the `User=` functionality, then the sub-tree
+ will be `chown()`ed to the indicated user so that it can correctly create
+ cgroups below it. Note however that systemd will do that only in the unified
+ hierarchy (in unified and hybrid mode) as well as on systemd's own private
+ hierarchy (in legacy and hybrid mode). It won't pass ownership of the legacy
+ controller hierarchies. Delegation to less privileged processes is not safe
+ in cgroup v1 (as a limitation of the kernel), hence systemd won't facilitate
+ access to it.
+
+3. Any BPF IP filter programs systemd installs will be installed with
+ `BPF_F_ALLOW_MULTI` so that your program can install additional ones.
+
+In unit files the `Delegate=` property is superficially exposed as
+boolean. However, since v236 it optionally takes a list of controller names
+instead. If so, delegation is requested for listed controllers
+specifically. Note that this only encodes a request. Depending on various
+parameters it might happen that your service actually will get fewer
+controllers delegated (for example, because the controller is not available on
+the current kernel or was turned off) or more. If no list is specified
+(i.e. the property simply set to `yes`) then all available controllers are
+delegated.
+
+Let's stress one thing: delegation is available on scope and service units
+only. It's expressly not available on slice units. Why? Because slice units are
+our *inner* nodes of the cgroup trees and we freely attach services and scopes
+to them. If we'd allow delegation on slice units then this would mean that
+both systemd and your own manager would create/delete cgroups below the slice
+unit and that conflicts with the single-writer rule.
+
+So, if you want to do your own raw cgroups kernel level access, then allocate a
+scope unit, or a service unit (or just use the service unit you already have
+for your service code), and turn on delegation for it.
+
+The service manager sets the `user.delegate` extended attribute (readable via
+`getxattr(2)` and related calls) to the character `1` on cgroup directories
+where delegation is enabled (and removes it on those cgroups where it is
+not). This may be used by service programs to determine whether a cgroup tree
+was delegated to them. Note that this is only supported on kernels 5.6 and
+newer in combination with systemd 251 and newer.
+
+(OK, here's one caveat: if you turn on delegation for a service, and that
+service has `ExecStartPost=`, `ExecReload=`, `ExecStop=` or `ExecStopPost=`
+set, then these commands will be executed within the `.control/` sub-cgroup of
+your service's cgroup. This is necessary because by turning on delegation we
+have to assume that the cgroup delegated to your service is now an *inner*
+cgroup, which means that it may not directly contain any processes. Hence, if
+your service has any of these four settings set, you must be prepared that a
+`.control/` subcgroup might appear, managed by the service manager. This also
+means that your service code should have moved itself further down the cgroup
+tree by the time it notifies the service manager about start-up readiness, so
+that the service's main cgroup is definitely an inner node by the time the
+service manager might start `ExecStartPost=`. Starting with systemd 254 you may
+also use `DelegateSubgroup=` to let the service manager put your initial
+service process into a subgroup right away.)
+
+(Also note, if you intend to use "threaded" cgroups — as added in Linux 4.14 —,
+then you should do that *two* levels down from the main service cgroup your
+turned delegation on for. Why that? You need one level so that systemd can
+properly create the `.control` subgroup, as described above. But that one
+cannot be threaded, since that would mean `.control` has to be threaded too —
+this is a requirement of threaded cgroups: either a cgroup and all its siblings
+are threaded or none –, but systemd expects it to be a regular cgroup. Thus you
+have to nest a second cgroup beneath it which then can be threaded.)
+
+## Three Scenarios
+
+Let's say you write a container manager, and you wonder what to do regarding
+cgroups for it, as you want your manager to be able to run on systemd systems.
+
+You basically have three options:
+
+1. 😊 The *integration-is-good* option. For this, you register each container
+ you have either as a systemd service (i.e. let systemd invoke the executor
+ binary for you) or a systemd scope (i.e. your manager executes the binary
+ directly, but then tells systemd about it. In this mode the administrator
+ can use the usual systemd resource management and reporting commands
+ individually on those containers. By turning on `Delegate=` for these scopes
+ or services you make it possible to run cgroup-enabled programs in your
+ containers, for example a nested systemd instance. This option has two
+ sub-options:
+
+ a. You transiently register the service or scope by directly contacting
+ systemd via D-Bus. In this case systemd will just manage the unit for you
+ and nothing else.
+
+ b. Instead you register the service or scope through `systemd-machined`
+ (also via D-Bus). This mini-daemon is basically just a proxy for the same
+ operations as in a. The main benefit of this: this way you let the system
+ know that what you are registering is a container, and this opens up
+ certain additional integration points. For example, `journalctl -M` can
+ then be used to directly look into any container's journal logs (should
+ the container run systemd inside), or `systemctl -M` can be used to
+ directly invoke systemd operations inside the containers. Moreover tools
+ like "ps" can then show you to which container a process belongs (`ps -eo
+ pid,comm,machine`), and even gnome-system-monitor supports it.
+
+2. 🙁 The *i-like-islands* option. If all you care about is your own cgroup tree,
+ and you want to have to do as little as possible with systemd and no
+ interest in integration with the rest of the system, then this is a valid
+ option. For this all you have to do is turn on `Delegate=` for your main
+ manager daemon. Then figure out the cgroup systemd placed your daemon in:
+ you can now freely create sub-cgroups beneath it. Don't forget the
+ *no-processes-in-inner-nodes* rule however: you have to move your main
+ daemon process out of that cgroup (and into a sub-cgroup) before you can
+ start further processes in any of your sub-cgroups.
+
+3. 🙁 The *i-like-continents* option. In this option you'd leave your manager
+ daemon where it is, and would not turn on delegation on its unit. However,
+ as you start your first managed process (a container, for example) you would
+ register a new scope unit with systemd, and that scope unit would have
+ `Delegate=` turned on, and it would contain the PID of this process; all
+ your managed processes subsequently created should also be moved into this
+ scope. From systemd's PoV there'd be two units: your manager service and the
+ big scope that contains all your managed processes in one.
+
+BTW: if for whatever reason you say "I hate D-Bus, I'll never call any D-Bus
+API, kthxbye", then options #1 and #3 are not available, as they generally
+involve talking to systemd from your program code, via D-Bus. You still have
+option #2 in that case however, as you can simply set `Delegate=` in your
+service's unit file and you are done and have your own sub-tree. In fact, #2 is
+the one option that allows you to completely ignore systemd's existence: you
+can entirely generically follow the single rule that you just use the cgroup
+you are started in, and everything below it, whatever that might be. That said,
+maybe if you dislike D-Bus and systemd that much, the better approach might be
+to work on that, and widen your horizon a bit. You are welcome.
+
+## Controller Support
+
+systemd supports a number of controllers (but not all). Specifically, supported
+are:
+
+* on cgroup v1: `cpu`, `cpuacct`, `blkio`, `memory`, `devices`, `pids`
+* on cgroup v2: `cpu`, `io`, `memory`, `pids`
+
+It is our intention to natively support all cgroup v2 controllers as they are
+added to the kernel. However, regarding cgroup v1: at this point we will not
+add support for any other controllers anymore. This means systemd currently
+does not and will never manage the following controllers on cgroup v1:
+`freezer`, `cpuset`, `net_cls`, `perf_event`, `net_prio`, `hugetlb`. Why not?
+Depending on the case, either their API semantics or implementations aren't
+really usable, or it's very clear they have no future on cgroup v2, and we
+won't add new code for stuff that clearly has no future.
+
+Effectively this means that all those mentioned cgroup v1 controllers are up
+for grabs: systemd won't manage them, and hence won't delegate them to your
+code (however, systemd will still mount their hierarchies, simply because it
+mounts all controller hierarchies it finds available in the kernel). If you
+decide to use them, then that's fine, but systemd won't help you with it (but
+also not interfere with it). To be nice to other tenants it might be wise to
+replicate the cgroup hierarchies of the other controllers in them too however,
+but of course that's between you and those other tenants, and systemd won't
+care. Replicating the cgroup hierarchies in those unsupported controllers would
+mean replicating the full cgroup paths in them, and hence the prefixing
+`.slice` components too, otherwise the hierarchies will start being orthogonal
+after all, and that's not really desirable. One more thing: systemd will clean
+up after you in the hierarchies it manages: if your daemon goes down, its
+cgroups will be removed too. You basically get the guarantee that you start
+with a pristine cgroup sub-tree for your service or scope whenever it is
+started. This is not the case however in the hierarchies systemd doesn't
+manage. This means that your programs should be ready to deal with left-over
+cgroups in them — from previous runs, and be extra careful with them as they
+might still carry settings that might not be valid anymore.
+
+Note a particular asymmetry here: if your systemd version doesn't support a
+specific controller on cgroup v1 you can still make use of it for delegation,
+by directly fiddling with its hierarchy and replicating the cgroup tree there
+as necessary (as suggested above). However, on cgroup v2 this is different:
+separately mounted hierarchies are not available, and delegation has always to
+happen through systemd itself. This means: when you update your kernel and it
+adds a new, so far unseen controller, and you want to use it for delegation,
+then you also need to update systemd to a version that groks it.
+
+## systemd as Container Payload
+
+systemd can happily run as a container payload's PID 1. Note that systemd
+unconditionally needs write access to the cgroup tree however, hence you need
+to delegate a sub-tree to it. Note that there's nothing too special you have to
+do beyond that: just invoke systemd as PID 1 inside the root of the delegated
+cgroup sub-tree, and it will figure out the rest: it will determine the cgroup
+it is running in and take possession of it. It won't interfere with any cgroup
+outside of the sub-tree it was invoked in. Use of `CLONE_NEWCGROUP` is hence
+optional (but of course wise).
+
+Note one particular asymmetry here though: systemd will try to take possession
+of the root cgroup you pass to it *in* *full*, i.e. it will not only
+create/remove child cgroups below it, it will also attempt to manage the
+attributes of it. OTOH as mentioned above, when delegating a cgroup tree to
+somebody else it only passes the rights to create/remove sub-cgroups, but will
+insist on managing the delegated cgroup tree's top-level attributes. Or in
+other words: systemd is *greedy* when accepting delegated cgroup trees and also
+*greedy* when delegating them to others: it insists on managing attributes on
+the specific cgroup in both cases. A container manager that is itself a payload
+of a host systemd which wants to run a systemd as its own container payload
+instead hence needs to insert an extra level in the hierarchy in between, so
+that the systemd on the host and the one in the container won't fight for the
+attributes. That said, you likely should do that anyway, due to the
+no-processes-in-inner-cgroups rule, see below.
+
+When systemd runs as container payload it will make use of all hierarchies it
+has write access to. For legacy mode you need to make at least
+`/sys/fs/cgroup/systemd/` available, all other hierarchies are optional. For
+hybrid mode you need to add `/sys/fs/cgroup/unified/`. Finally, for fully
+unified you (of course, I guess) need to provide only `/sys/fs/cgroup/` itself.
+
+## Some Dos
+
+1. ⚡ If you go for implementation option 1a or 1b (as in the list above), then
+ each of your containers will have its own systemd-managed unit and hence
+ cgroup with possibly further sub-cgroups below. Typically the first process
+ running in that unit will be some kind of executor program, which will in
+ turn fork off the payload processes of the container. In this case don't
+ forget that there are two levels of delegation involved: first, systemd
+ delegates a group sub-tree to your executor. And then your executor should
+ delegate a sub-tree further down to the container payload. Oh, and because
+ of the no-process-in-inner-nodes rule, your executor needs to migrate itself
+ to a sub-cgroup of the cgroup it got delegated, too. Most likely you hence
+ want a two-pronged approach: below the cgroup you got started in, you want
+ one cgroup maybe called `supervisor/` where your manager runs in and then
+ for each container a sibling cgroup of that maybe called `payload-xyz/`.
+
+2. ⚡ Don't forget that the cgroups you create have to have names that are
+ suitable as UNIX file names, and that they live in the same namespace as the
+ various kernel attribute files. Hence, when you want to allow the user
+ arbitrary naming, you might need to escape some of the names (for example,
+ you really don't want to create a cgroup named `tasks`, just because the
+ user created a container by that name, because `tasks` after all is a magic
+ attribute in cgroup v1, and your `mkdir()` will hence fail with `EEXIST`. In
+ systemd we do escaping by prefixing names that might collide with a kernel
+ attribute name with an underscore. You might want to do the same, but this
+ is really up to you how you do it. Just do it, and be careful.
+
+## Some Don'ts
+
+1. 🚫 Never create your own cgroups below arbitrary cgroups systemd manages, i.e
+ cgroups you haven't set `Delegate=` in. Specifically: 🔥 don't create your
+ own cgroups below the root cgroup 🔥. That's owned by systemd, and you will
+ step on systemd's toes if you ignore that, and systemd will step on
+ yours. Get your own delegated sub-tree, you may create as many cgroups there
+ as you like. Seriously, if you create cgroups directly in the cgroup root,
+ then all you do is ask for trouble.
+
+2. 🚫 Don't attempt to set `Delegate=` in slice units, and in particular not in
+ `-.slice`. It's not supported, and will generate an error.
+
+3. 🚫 Never *write* to any of the attributes of a cgroup systemd created for
+ you. It's systemd's private property. You are welcome to manipulate the
+ attributes of cgroups you created in your own delegated sub-tree, but the
+ cgroup tree of systemd itself is out of limits for you. It's fine to *read*
+ from any attribute you like however. That's totally OK and welcome.
+
+4. 🚫 When not using `CLONE_NEWCGROUP` when delegating a sub-tree to a
+ container payload running systemd, then don't get the idea that you can bind
+ mount only a sub-tree of the host's cgroup tree into the container. Part of
+ the cgroup API is that `/proc/$PID/cgroup` reports the cgroup path of every
+ process, and hence any path below `/sys/fs/cgroup/` needs to match what
+ `/proc/$PID/cgroup` of the payload processes reports. What you can do safely
+ however, is mount the upper parts of the cgroup tree read-only (or even
+ replace the middle bits with an intermediary `tmpfs` — but be careful not to
+ break the `statfs()` detection logic discussed above), as long as the path
+ to the delegated sub-tree remains accessible as-is.
+
+5. ⚡ Currently, the algorithm for mapping between slice/scope/service unit
+ naming and their cgroup paths is not considered public API of systemd, and
+ may change in future versions. This means: it's best to avoid implementing a
+ local logic of translating cgroup paths to slice/scope/service names in your
+ program, or vice versa — it's likely going to break sooner or later. Use the
+ appropriate D-Bus API calls for that instead, so that systemd translates
+ this for you. (Specifically: each Unit object has a `ControlGroup` property
+ to get the cgroup for a unit. The method `GetUnitByControlGroup()` may be
+ used to get the unit for a cgroup.)
+
+6. ⚡ Think twice before delegating cgroup v1 controllers to less privileged
+ containers. It's not safe, you basically allow your containers to freeze the
+ system with that and worse. Delegation is a strongpoint of cgroup v2 though,
+ and there it's safe to treat delegation boundaries as privilege boundaries.
+
+And that's it for now. If you have further questions, refer to the systemd
+mailing list.
+
+— Berlin, 2018-04-20