Merging upstream version 256.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
author: Daniel Baumann <daniel.baumann@progress-linux.org> 2024-06-12 03:50:45 +0000
committer: Daniel Baumann <daniel.baumann@progress-linux.org> 2024-06-12 03:50:45 +0000
commit: efeb864cb547a2cbf96dc0053a8bdb4d9190b364 (patch)
tree: c0b83368f18be983fcc763200c4c24d633244588 /src/basic/linux
parent: Releasing progress-linux version 255.5-1~progress7.99u1. (diff)
download: systemd-efeb864cb547a2cbf96dc0053a8bdb4d9190b364.tar.xz
systemd-efeb864cb547a2cbf96dc0053a8bdb4d9190b364.zip
16 files changed, 1383 insertions, 226 deletions
diff --git a/src/basic/linux/btrfs.h b/src/basic/linux/btrfs.h
index 74ed908..73a295e 100644
--- a/src/basic/linux/btrfs.h
+++ b/src/basic/linux/btrfs.h
@@ -94,6 +94,7 @@ struct btrfs_qgroup_limit {
  * struct btrfs_qgroup_inherit.flags
  */
 #define BTRFS_QGROUP_INHERIT_SET_LIMITS	(1ULL << 0)
+#define BTRFS_QGROUP_INHERIT_FLAGS_SUPP (BTRFS_QGROUP_INHERIT_SET_LIMITS)
 
 struct btrfs_qgroup_inherit {
 	__u64	flags;
@@ -189,6 +190,7 @@ struct btrfs_scrub_progress {
 };
 
 #define BTRFS_SCRUB_READONLY	1
+#define BTRFS_SCRUB_SUPPORTED_FLAGS	(BTRFS_SCRUB_READONLY)
 struct btrfs_ioctl_scrub_args {
 	__u64 devid;				/* in */
 	__u64 start;				/* in */
@@ -247,7 +249,17 @@ struct btrfs_ioctl_dev_info_args {
 	__u8 uuid[BTRFS_UUID_SIZE];		/* in/out */
 	__u64 bytes_used;			/* out */
 	__u64 total_bytes;			/* out */
-	__u64 unused[379];			/* pad to 4k */
+	/*
+	 * Optional, out.
+	 *
+	 * Showing the fsid of the device, allowing user space to check if this
+	 * device is a seeding one.
+	 *
+	 * Introduced in v6.3, thus user space still needs to check if kernel
+	 * changed this value.  Older kernel will not touch the values here.
+	 */
+	__u8 fsid[BTRFS_UUID_SIZE];
+	__u64 unused[377];			/* pad to 4k */
 	__u8 path[BTRFS_DEVICE_PATH_NAME_MAX];	/* out */
 };
 
@@ -324,6 +336,8 @@ struct btrfs_ioctl_fs_info_args {
 #define BTRFS_FEATURE_INCOMPAT_RAID1C34		(1ULL << 11)
 #define BTRFS_FEATURE_INCOMPAT_ZONED		(1ULL << 12)
 #define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2	(1ULL << 13)
+#define BTRFS_FEATURE_INCOMPAT_RAID_STRIPE_TREE	(1ULL << 14)
+#define BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA	(1ULL << 16)
 
 struct btrfs_ioctl_feature_flags {
 	__u64 compat_flags;
@@ -603,6 +617,9 @@ struct btrfs_ioctl_clone_range_args {
  */
 #define BTRFS_DEFRAG_RANGE_COMPRESS 1
 #define BTRFS_DEFRAG_RANGE_START_IO 2
+#define BTRFS_DEFRAG_RANGE_FLAGS_SUPP	(BTRFS_DEFRAG_RANGE_COMPRESS |		\
+					 BTRFS_DEFRAG_RANGE_START_IO)
+
 struct btrfs_ioctl_defrag_range_args {
 	/* start of the defrag operation */
 	__u64 start;
@@ -744,6 +761,7 @@ struct btrfs_ioctl_get_dev_stats {
 #define BTRFS_QUOTA_CTL_ENABLE	1
 #define BTRFS_QUOTA_CTL_DISABLE	2
 #define BTRFS_QUOTA_CTL_RESCAN__NOTUSED	3
+#define BTRFS_QUOTA_CTL_ENABLE_SIMPLE_QUOTA 4
 struct btrfs_ioctl_quota_ctl_args {
 	__u64 cmd;
 	__u64 status;
diff --git a/src/basic/linux/btrfs_tree.h b/src/basic/linux/btrfs_tree.h
index ab38d0f..d24e8e1 100644
--- a/src/basic/linux/btrfs_tree.h
+++ b/src/basic/linux/btrfs_tree.h
@@ -73,6 +73,9 @@
 /* Holds the block group items for extent tree v2. */
 #define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL
 
+/* Tracks RAID stripes in block groups. */
+#define BTRFS_RAID_STRIPE_TREE_OBJECTID 12ULL
+
 /* device stats in the device tree */
 #define BTRFS_DEV_STATS_OBJECTID 0ULL
 
@@ -216,11 +219,31 @@
  */
 #define BTRFS_METADATA_ITEM_KEY	169
 
+/*
+ * Special inline ref key which stores the id of the subvolume which originally
+ * created the extent. This subvolume owns the extent permanently from the
+ * perspective of simple quotas. Needed to know which subvolume to free quota
+ * usage from when the extent is deleted.
+ *
+ * Stored as an inline ref rather to avoid wasting space on a separate item on
+ * top of the existing extent item. However, unlike the other inline refs,
+ * there is one one owner ref per extent rather than one per extent.
+ *
+ * Because of this, it goes at the front of the list of inline refs, and thus
+ * must have a lower type value than any other inline ref type (to satisfy the
+ * disk format rule that inline refs have non-decreasing type).
+ */
+#define BTRFS_EXTENT_OWNER_REF_KEY	172
+
 #define BTRFS_TREE_BLOCK_REF_KEY	176
 
 #define BTRFS_EXTENT_DATA_REF_KEY	178
 
-#define BTRFS_EXTENT_REF_V0_KEY		180
+/*
+ * Obsolete key. Defintion removed in 6.6, value may be reused in the future.
+ *
+ * #define BTRFS_EXTENT_REF_V0_KEY	180
+ */
 
 #define BTRFS_SHARED_BLOCK_REF_KEY	182
 
@@ -257,6 +280,8 @@
 #define BTRFS_DEV_ITEM_KEY	216
 #define BTRFS_CHUNK_ITEM_KEY	228
 
+#define BTRFS_RAID_STRIPE_KEY	230
+
 /*
  * Records the overall state of the qgroups.
  * There's only one instance of this key present,
@@ -715,6 +740,30 @@ struct btrfs_free_space_header {
 	__le64 num_bitmaps;
 } __attribute__ ((__packed__));
 
+struct btrfs_raid_stride {
+	/* The id of device this raid extent lives on. */
+	__le64 devid;
+	/* The physical location on disk. */
+	__le64 physical;
+} __attribute__ ((__packed__));
+
+/* The stripe_extent::encoding, 1:1 mapping of enum btrfs_raid_types. */
+#define BTRFS_STRIPE_RAID0	1
+#define BTRFS_STRIPE_RAID1	2
+#define BTRFS_STRIPE_DUP	3
+#define BTRFS_STRIPE_RAID10	4
+#define BTRFS_STRIPE_RAID5	5
+#define BTRFS_STRIPE_RAID6	6
+#define BTRFS_STRIPE_RAID1C3	7
+#define BTRFS_STRIPE_RAID1C4	8
+
+struct btrfs_stripe_extent {
+	__u8 encoding;
+	__u8 reserved[7];
+	/* An array of raid strides this stripe is composed of. */
+	struct btrfs_raid_stride strides[];
+} __attribute__ ((__packed__));
+
 #define BTRFS_HEADER_FLAG_WRITTEN	(1ULL << 0)
 #define BTRFS_HEADER_FLAG_RELOC		(1ULL << 1)
 
@@ -783,6 +832,10 @@ struct btrfs_shared_data_ref {
 	__le32 count;
 } __attribute__ ((__packed__));
 
+struct btrfs_extent_owner_ref {
+	__le64 root_id;
+} __attribute__ ((__packed__));
+
 struct btrfs_extent_inline_ref {
 	__u8 type;
 	__le64 offset;
@@ -1200,9 +1253,17 @@ static inline __u16 btrfs_qgroup_level(__u64 qgroupid)
  */
 #define BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT	(1ULL << 2)
 
+/*
+ * Whether or not this filesystem is using simple quotas.  Not exactly the
+ * incompat bit, because we support using simple quotas, disabling it, then
+ * going back to full qgroup quotas.
+ */
+#define BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE	(1ULL << 3)
+
 #define BTRFS_QGROUP_STATUS_FLAGS_MASK	(BTRFS_QGROUP_STATUS_FLAG_ON |		\
 					 BTRFS_QGROUP_STATUS_FLAG_RESCAN |	\
-					 BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT)
+					 BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT | \
+					 BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE)
 
 #define BTRFS_QGROUP_STATUS_VERSION        1
 
@@ -1224,6 +1285,15 @@ struct btrfs_qgroup_status_item {
 	 * of the scan. It contains a logical address
 	 */
 	__le64 rescan;
+
+	/*
+	 * The generation when quotas were last enabled. Used by simple quotas to
+	 * avoid decrementing when freeing an extent that was written before
+	 * enable.
+	 *
+	 * Set only if flags contain BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE.
+	 */
+	__le64 enable_gen;
 } __attribute__ ((__packed__));
 
 struct btrfs_qgroup_info_item {
diff --git a/src/basic/linux/fou.h b/src/basic/linux/fou.h
index 87c2c9f..b5cd3e7 100644
--- a/src/basic/linux/fou.h
+++ b/src/basic/linux/fou.h
@@ -1,32 +1,37 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* fou.h - FOU Interface */
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/*	Documentation/netlink/specs/fou.yaml */
+/* YNL-GEN uapi header */
 
 #ifndef _UAPI_LINUX_FOU_H
 #define _UAPI_LINUX_FOU_H
 
-/* NETLINK_GENERIC related info
- */
 #define FOU_GENL_NAME		"fou"
-#define FOU_GENL_VERSION	0x1
+#define FOU_GENL_VERSION	1
 
 enum {
-	FOU_ATTR_UNSPEC,
-	FOU_ATTR_PORT,				/* u16 */
-	FOU_ATTR_AF,				/* u8 */
-	FOU_ATTR_IPPROTO,			/* u8 */
-	FOU_ATTR_TYPE,				/* u8 */
-	FOU_ATTR_REMCSUM_NOPARTIAL,		/* flag */
-	FOU_ATTR_LOCAL_V4,			/* u32 */
-	FOU_ATTR_LOCAL_V6,			/* in6_addr */
-	FOU_ATTR_PEER_V4,			/* u32 */
-	FOU_ATTR_PEER_V6,			/* in6_addr */
-	FOU_ATTR_PEER_PORT,			/* u16 */
-	FOU_ATTR_IFINDEX,			/* s32 */
-
-	__FOU_ATTR_MAX,
+	FOU_ENCAP_UNSPEC,
+	FOU_ENCAP_DIRECT,
+	FOU_ENCAP_GUE,
 };
 
-#define FOU_ATTR_MAX		(__FOU_ATTR_MAX - 1)
+enum {
+	FOU_ATTR_UNSPEC,
+	FOU_ATTR_PORT,
+	FOU_ATTR_AF,
+	FOU_ATTR_IPPROTO,
+	FOU_ATTR_TYPE,
+	FOU_ATTR_REMCSUM_NOPARTIAL,
+	FOU_ATTR_LOCAL_V4,
+	FOU_ATTR_LOCAL_V6,
+	FOU_ATTR_PEER_V4,
+	FOU_ATTR_PEER_V6,
+	FOU_ATTR_PEER_PORT,
+	FOU_ATTR_IFINDEX,
+
+	__FOU_ATTR_MAX
+};
+#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1)
 
 enum {
 	FOU_CMD_UNSPEC,
@@ -34,15 +39,8 @@ enum {
 	FOU_CMD_DEL,
 	FOU_CMD_GET,
 
-	__FOU_CMD_MAX,
+	__FOU_CMD_MAX
 };
-
-enum {
-	FOU_ENCAP_UNSPEC,
-	FOU_ENCAP_DIRECT,
-	FOU_ENCAP_GUE,
-};
-
-#define FOU_CMD_MAX	(__FOU_CMD_MAX - 1)
+#define FOU_CMD_MAX (__FOU_CMD_MAX - 1)
 
 #endif /* _UAPI_LINUX_FOU_H */
diff --git a/src/basic/linux/if_bridge.h b/src/basic/linux/if_bridge.h
index d9de241..a5b743a 100644
--- a/src/basic/linux/if_bridge.h
+++ b/src/basic/linux/if_bridge.h
@@ -523,6 +523,9 @@ enum {
 	BRIDGE_VLANDB_ENTRY_TUNNEL_INFO,
 	BRIDGE_VLANDB_ENTRY_STATS,
 	BRIDGE_VLANDB_ENTRY_MCAST_ROUTER,
+	BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS,
+	BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS,
+	BRIDGE_VLANDB_ENTRY_NEIGH_SUPPRESS,
 	__BRIDGE_VLANDB_ENTRY_MAX,
 };
 #define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1)
@@ -631,6 +634,11 @@ enum {
 	MDBA_MDB_EATTR_GROUP_MODE,
 	MDBA_MDB_EATTR_SOURCE,
 	MDBA_MDB_EATTR_RTPROT,
+	MDBA_MDB_EATTR_DST,
+	MDBA_MDB_EATTR_DST_PORT,
+	MDBA_MDB_EATTR_VNI,
+	MDBA_MDB_EATTR_IFINDEX,
+	MDBA_MDB_EATTR_SRC_VNI,
 	__MDBA_MDB_EATTR_MAX
 };
 #define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1)
@@ -715,6 +723,24 @@ enum {
 };
 #define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1)
 
+/* [MDBA_GET_ENTRY] = {
+ *    struct br_mdb_entry
+ *    [MDBA_GET_ENTRY_ATTRS] = {
+ *       [MDBE_ATTR_SOURCE]
+ *          struct in_addr / struct in6_addr
+ *       [MDBE_ATTR_SRC_VNI]
+ *          u32
+ *    }
+ * }
+ */
+enum {
+	MDBA_GET_ENTRY_UNSPEC,
+	MDBA_GET_ENTRY,
+	MDBA_GET_ENTRY_ATTRS,
+	__MDBA_GET_ENTRY_MAX,
+};
+#define MDBA_GET_ENTRY_MAX (__MDBA_GET_ENTRY_MAX - 1)
+
 /* [MDBA_SET_ENTRY_ATTRS] = {
  *    [MDBE_ATTR_xxx]
  *    ...
@@ -726,6 +752,12 @@ enum {
 	MDBE_ATTR_SRC_LIST,
 	MDBE_ATTR_GROUP_MODE,
 	MDBE_ATTR_RTPROT,
+	MDBE_ATTR_DST,
+	MDBE_ATTR_DST_PORT,
+	MDBE_ATTR_VNI,
+	MDBE_ATTR_IFINDEX,
+	MDBE_ATTR_SRC_VNI,
+	MDBE_ATTR_STATE_MASK,
 	__MDBE_ATTR_MAX,
 };
 #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)
diff --git a/src/basic/linux/if_link.h b/src/basic/linux/if_link.h
index 1021a7e..ffa637b 100644
--- a/src/basic/linux/if_link.h
+++ b/src/basic/linux/if_link.h
@@ -374,6 +374,9 @@ enum {
 
 	IFLA_DEVLINK_PORT,
 
+	IFLA_GSO_IPV4_MAX_SIZE,
+	IFLA_GRO_IPV4_MAX_SIZE,
+	IFLA_DPLL_PIN,
 	__IFLA_MAX
 };
 
@@ -458,6 +461,286 @@ enum in6_addr_gen_mode {
 
 /* Bridge section */
 
+/**
+ * DOC: Bridge enum definition
+ *
+ * Please *note* that the timer values in the following section are expected
+ * in clock_t format, which is seconds multiplied by USER_HZ (generally
+ * defined as 100).
+ *
+ * @IFLA_BR_FORWARD_DELAY
+ *   The bridge forwarding delay is the time spent in LISTENING state
+ *   (before moving to LEARNING) and in LEARNING state (before moving
+ *   to FORWARDING). Only relevant if STP is enabled.
+ *
+ *   The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
+ *   The default value is (15 * USER_HZ).
+ *
+ * @IFLA_BR_HELLO_TIME
+ *   The time between hello packets sent by the bridge, when it is a root
+ *   bridge or a designated bridge. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
+ *   The default value is (2 * USER_HZ).
+ *
+ * @IFLA_BR_MAX_AGE
+ *   The hello packet timeout is the time until another bridge in the
+ *   spanning tree is assumed to be dead, after reception of its last hello
+ *   message. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
+ *   The default value is (20 * USER_HZ).
+ *
+ * @IFLA_BR_AGEING_TIME
+ *   Configure the bridge's FDB entries aging time. It is the time a MAC
+ *   address will be kept in the FDB after a packet has been received from
+ *   that address. After this time has passed, entries are cleaned up.
+ *   Allow values outside the 802.1 standard specification for special cases:
+ *
+ *     * 0 - entry never ages (all permanent)
+ *     * 1 - entry disappears (no persistence)
+ *
+ *   The default value is (300 * USER_HZ).
+ *
+ * @IFLA_BR_STP_STATE
+ *   Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
+ *   (*IFLA_BR_STP_STATE* == 0) for this bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_PRIORITY
+ *   Set this bridge's spanning tree priority, used during STP root bridge
+ *   election.
+ *
+ *   The valid values are between 0 and 65535.
+ *
+ * @IFLA_BR_VLAN_FILTERING
+ *   Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
+ *   (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
+ *   consider the VLAN tag when handling packets.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_PROTOCOL
+ *   Set the protocol used for VLAN filtering.
+ *
+ *   The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
+ *   is 0x8100(802.1Q).
+ *
+ * @IFLA_BR_GROUP_FWD_MASK
+ *   The group forwarding mask. This is the bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses (of the form 01:80:C2:00:00:0X).
+ *
+ *   The default value is 0, which means the bridge does not forward any
+ *   link-local frames coming on this port.
+ *
+ * @IFLA_BR_ROOT_ID
+ *   The bridge root id, read only.
+ *
+ * @IFLA_BR_BRIDGE_ID
+ *   The bridge id, read only.
+ *
+ * @IFLA_BR_ROOT_PORT
+ *   The bridge root port, read only.
+ *
+ * @IFLA_BR_ROOT_PATH_COST
+ *   The bridge root path cost, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE
+ *   The bridge topology change, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
+ *   The bridge topology change detected, read only.
+ *
+ * @IFLA_BR_HELLO_TIMER
+ *   The bridge hello timer, read only.
+ *
+ * @IFLA_BR_TCN_TIMER
+ *   The bridge tcn timer, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_TIMER
+ *   The bridge topology change timer, read only.
+ *
+ * @IFLA_BR_GC_TIMER
+ *   The bridge gc timer, read only.
+ *
+ * @IFLA_BR_GROUP_ADDR
+ *   Set the MAC address of the multicast group this bridge uses for STP.
+ *   The address must be a link-local address in standard Ethernet MAC address
+ *   format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
+ *
+ *   The default value is 0.
+ *
+ * @IFLA_BR_FDB_FLUSH
+ *   Flush bridge's fdb dynamic entries.
+ *
+ * @IFLA_BR_MCAST_ROUTER
+ *   Set bridge's multicast router if IGMP snooping is enabled.
+ *   The valid values are:
+ *
+ *     * 0 - disabled.
+ *     * 1 - automatic (queried).
+ *     * 2 - permanently enabled.
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_SNOOPING
+ *   Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
+ *   (*IFLA_BR_MCAST_SNOOPING* == 0).
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_QUERY_USE_IFADDR
+ *   If enabled use the bridge's own IP address as source address for IGMP
+ *   queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
+ *   (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_QUERIER
+ *   Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
+ *   (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
+ *   queries by the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_HASH_ELASTICITY
+ *   Set multicast database hash elasticity, It is the maximum chain length in
+ *   the multicast hash table. This attribute is *deprecated* and the value
+ *   is always 16.
+ *
+ * @IFLA_BR_MCAST_HASH_MAX
+ *   Set maximum size of the multicast hash table
+ *
+ *   The default value is 4096, the value must be a power of 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_CNT
+ *   The Last Member Query Count is the number of Group-Specific Queries
+ *   sent before the router assumes there are no local members. The Last
+ *   Member Query Count is also the number of Group-and-Source-Specific
+ *   Queries sent before the router assumes there are no listeners for a
+ *   particular source.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_CNT
+ *   The Startup Query Count is the number of Queries sent out on startup,
+ *   separated by the Startup Query Interval.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_INTVL
+ *   The Last Member Query Interval is the Max Response Time inserted into
+ *   Group-Specific Queries sent in response to Leave Group messages, and
+ *   is also the amount of time between Group-Specific Query messages.
+ *
+ *   The default value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_MEMBERSHIP_INTVL
+ *   The interval after which the bridge will leave a group, if no membership
+ *   reports for this group are received.
+ *
+ *   The default value is (260 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERIER_INTVL
+ *   The interval between queries sent by other routers. if no queries are
+ *   seen after this delay has passed, the bridge will start to send its own
+ *   queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
+ *
+ *   The default value is (255 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_INTVL
+ *   The Query Interval is the interval between General Queries sent by
+ *   the Querier.
+ *
+ *   The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
+ *   The Max Response Time used to calculate the Max Resp Code inserted
+ *   into the periodic General Queries.
+ *
+ *   The default value is (10 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
+ *   The interval between queries in the startup phase.
+ *
+ *   The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_NF_CALL_IPTABLES
+ *   Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
+ *   iptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_IP6TABLES
+ *   Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
+ *   ip6tables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_ARPTABLES
+ *   Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
+ *   arptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_DEFAULT_PVID
+ *   VLAN ID applied to untagged and priority-tagged incoming packets.
+ *
+ *   The default value is 1. Setting to the special value 0 makes all ports of
+ *   this bridge not have a PVID by default, which means that they will
+ *   not accept VLAN-untagged traffic.
+ *
+ * @IFLA_BR_PAD
+ *   Bridge attribute padding type for netlink message.
+ *
+ * @IFLA_BR_VLAN_STATS_ENABLED
+ *   Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_STATS_ENABLED
+ *   Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
+ *   (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
+ *   accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_IGMP_VERSION
+ *   Set the IGMP version.
+ *
+ *   The valid values are 2 and 3. The default value is 2.
+ *
+ * @IFLA_BR_MCAST_MLD_VERSION
+ *   Set the MLD version.
+ *
+ *   The valid values are 1 and 2. The default value is 1.
+ *
+ * @IFLA_BR_VLAN_STATS_PER_PORT
+ *   Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
+ *   Can be changed only when there are no port VLANs configured.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MULTI_BOOLOPT
+ *   The multi_boolopt is used to control new boolean options to avoid adding
+ *   new netlink attributes. You can look at ``enum br_boolopt_id`` for those
+ *   options.
+ *
+ * @IFLA_BR_MCAST_QUERIER_STATE
+ *   Bridge mcast querier states, read only.
+ *
+ * @IFLA_BR_FDB_N_LEARNED
+ *   The number of dynamically learned FDB entries for the current bridge,
+ *   read only.
+ *
+ * @IFLA_BR_FDB_MAX_LEARNED
+ *   Set the number of max dynamically learned FDB entries for the current
+ *   bridge.
+ */
 enum {
 	IFLA_BR_UNSPEC,
 	IFLA_BR_FORWARD_DELAY,
@@ -507,6 +790,8 @@ enum {
 	IFLA_BR_VLAN_STATS_PER_PORT,
 	IFLA_BR_MULTI_BOOLOPT,
 	IFLA_BR_MCAST_QUERIER_STATE,
+	IFLA_BR_FDB_N_LEARNED,
+	IFLA_BR_FDB_MAX_LEARNED,
 	__IFLA_BR_MAX,
 };
 
@@ -517,11 +802,252 @@ struct ifla_bridge_id {
 	__u8	addr[6]; /* ETH_ALEN */
 };
 
+/**
+ * DOC: Bridge mode enum definition
+ *
+ * @BRIDGE_MODE_HAIRPIN
+ *   Controls whether traffic may be sent back out of the port on which it
+ *   was received. This option is also called reflective relay mode, and is
+ *   used to support basic VEPA (Virtual Ethernet Port Aggregator)
+ *   capabilities. By default, this flag is turned off and the bridge will
+ *   not forward traffic back out of the receiving port.
+ */
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
 };
 
+/**
+ * DOC: Bridge port enum definition
+ *
+ * @IFLA_BRPORT_STATE
+ *   The operation state of the port. Here are the valid values.
+ *
+ *     * 0 - port is in STP *DISABLED* state. Make this port completely
+ *       inactive for STP. This is also called BPDU filter and could be used
+ *       to disable STP on an untrusted port, like a leaf virtual device.
+ *       The traffic forwarding is also stopped on this port.
+ *     * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled
+ *       on the bridge. In this state the port listens for STP BPDUs and
+ *       drops all other traffic frames.
+ *     * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on
+ *       the bridge. In this state the port will accept traffic only for the
+ *       purpose of updating MAC address tables.
+ *     * 3 - port is in STP *FORWARDING* state. Port is fully active.
+ *     * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on
+ *       the bridge. This state is used during the STP election process.
+ *       In this state, port will only process STP BPDUs.
+ *
+ * @IFLA_BRPORT_PRIORITY
+ *   The STP port priority. The valid values are between 0 and 255.
+ *
+ * @IFLA_BRPORT_COST
+ *   The STP path cost of the port. The valid values are between 1 and 65535.
+ *
+ * @IFLA_BRPORT_MODE
+ *   Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details.
+ *
+ * @IFLA_BRPORT_GUARD
+ *   Controls whether STP BPDUs will be processed by the bridge port. By
+ *   default, the flag is turned off to allow BPDU processing. Turning this
+ *   flag on will disable the bridge port if a STP BPDU packet is received.
+ *
+ *   If the bridge has Spanning Tree enabled, hostile devices on the network
+ *   may send BPDU on a port and cause network failure. Setting *guard on*
+ *   will detect and stop this by disabling the port. The port will be
+ *   restarted if the link is brought down, or removed and reattached.
+ *
+ * @IFLA_BRPORT_PROTECT
+ *   Controls whether a given port is allowed to become a root port or not.
+ *   Only used when STP is enabled on the bridge. By default the flag is off.
+ *
+ *   This feature is also called root port guard. If BPDU is received from a
+ *   leaf (edge) port, it should not be elected as root port. This could
+ *   be used if using STP on a bridge and the downstream bridges are not fully
+ *   trusted; this prevents a hostile guest from rerouting traffic.
+ *
+ * @IFLA_BRPORT_FAST_LEAVE
+ *   This flag allows the bridge to immediately stop multicast traffic
+ *   forwarding on a port that receives an IGMP Leave message. It is only used
+ *   when IGMP snooping is enabled on the bridge. By default the flag is off.
+ *
+ * @IFLA_BRPORT_LEARNING
+ *   Controls whether a given port will learn *source* MAC addresses from
+ *   received traffic or not. Also controls whether dynamic FDB entries
+ *   (which can also be added by software) will be refreshed by incoming
+ *   traffic. By default this flag is on.
+ *
+ * @IFLA_BRPORT_UNICAST_FLOOD
+ *   Controls whether unicast traffic for which there is no FDB entry will
+ *   be flooded towards this port. By default this flag is on.
+ *
+ * @IFLA_BRPORT_PROXYARP
+ *   Enable proxy ARP on this port.
+ *
+ * @IFLA_BRPORT_LEARNING_SYNC
+ *   Controls whether a given port will sync MAC addresses learned on device
+ *   port to bridge FDB.
+ *
+ * @IFLA_BRPORT_PROXYARP_WIFI
+ *   Enable proxy ARP on this port which meets extended requirements by
+ *   IEEE 802.11 and Hotspot 2.0 specifications.
+ *
+ * @IFLA_BRPORT_ROOT_ID
+ *
+ * @IFLA_BRPORT_BRIDGE_ID
+ *
+ * @IFLA_BRPORT_DESIGNATED_PORT
+ *
+ * @IFLA_BRPORT_DESIGNATED_COST
+ *
+ * @IFLA_BRPORT_ID
+ *
+ * @IFLA_BRPORT_NO
+ *
+ * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
+ *
+ * @IFLA_BRPORT_CONFIG_PENDING
+ *
+ * @IFLA_BRPORT_MESSAGE_AGE_TIMER
+ *
+ * @IFLA_BRPORT_FORWARD_DELAY_TIMER
+ *
+ * @IFLA_BRPORT_HOLD_TIMER
+ *
+ * @IFLA_BRPORT_FLUSH
+ *   Flush bridge ports' fdb dynamic entries.
+ *
+ * @IFLA_BRPORT_MULTICAST_ROUTER
+ *   Configure the port's multicast router presence. A port with
+ *   a multicast router will receive all multicast traffic.
+ *   The valid values are:
+ *
+ *     * 0 disable multicast routers on this port
+ *     * 1 let the system detect the presence of routers (default)
+ *     * 2 permanently enable multicast traffic forwarding on this port
+ *     * 3 enable multicast routers temporarily on this port, not depending
+ *         on incoming queries.
+ *
+ * @IFLA_BRPORT_PAD
+ *
+ * @IFLA_BRPORT_MCAST_FLOOD
+ *   Controls whether a given port will flood multicast traffic for which
+ *   there is no MDB entry. By default this flag is on.
+ *
+ * @IFLA_BRPORT_MCAST_TO_UCAST
+ *   Controls whether a given port will replicate packets using unicast
+ *   instead of multicast. By default this flag is off.
+ *
+ *   This is done by copying the packet per host and changing the multicast
+ *   destination MAC to a unicast one accordingly.
+ *
+ *   *mcast_to_unicast* works on top of the multicast snooping feature of the
+ *   bridge. Which means unicast copies are only delivered to hosts which
+ *   are interested in unicast and signaled this via IGMP/MLD reports previously.
+ *
+ *   This feature is intended for interface types which have a more reliable
+ *   and/or efficient way to deliver unicast packets than broadcast ones
+ *   (e.g. WiFi).
+ *
+ *   However, it should only be enabled on interfaces where no IGMPv2/MLDv1
+ *   report suppression takes place. IGMP/MLD report suppression issue is
+ *   usually overcome by the network daemon (supplicant) enabling AP isolation
+ *   and by that separating all STAs.
+ *
+ *   Delivery of STA-to-STA IP multicast is made possible again by enabling
+ *   and utilizing the bridge hairpin mode, which considers the incoming port
+ *   as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option).
+ *   Hairpin mode is performed after multicast snooping, therefore leading
+ *   to only deliver reports to STAs running a multicast router.
+ *
+ * @IFLA_BRPORT_VLAN_TUNNEL
+ *   Controls whether vlan to tunnel mapping is enabled on the port.
+ *   By default this flag is off.
+ *
+ * @IFLA_BRPORT_BCAST_FLOOD
+ *   Controls flooding of broadcast traffic on the given port. By default
+ *   this flag is on.
+ *
+ * @IFLA_BRPORT_GROUP_FWD_MASK
+ *   Set the group forward mask. This is a bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
+ *   to 0, which means the bridge does not forward any link-local frames
+ *   coming on this port).
+ *
+ * @IFLA_BRPORT_NEIGH_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression
+ *   is enabled on the port. By default this flag is off.
+ *
+ * @IFLA_BRPORT_ISOLATED
+ *   Controls whether a given port will be isolated, which means it will be
+ *   able to communicate with non-isolated ports only. By default this
+ *   flag is off.
+ *
+ * @IFLA_BRPORT_BACKUP_PORT
+ *   Set a backup port. If the port loses carrier all traffic will be
+ *   redirected to the configured backup port. Set the value to 0 to disable
+ *   it.
+ *
+ * @IFLA_BRPORT_MRP_RING_OPEN
+ *
+ * @IFLA_BRPORT_MRP_IN_OPEN
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
+ *   The number of per-port EHT hosts limit. The default value is 512.
+ *   Setting to 0 is not allowed.
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
+ *   The current number of tracked hosts, read only.
+ *
+ * @IFLA_BRPORT_LOCKED
+ *   Controls whether a port will be locked, meaning that hosts behind the
+ *   port will not be able to communicate through the port unless an FDB
+ *   entry with the unit's MAC address is in the FDB. The common use case is
+ *   that hosts are allowed access through authentication with the IEEE 802.1X
+ *   protocol or based on whitelists. By default this flag is off.
+ *
+ *   Please note that secure 802.1X deployments should always use the
+ *   *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its
+ *   FDB based on link-local (EAPOL) traffic received on the port.
+ *
+ * @IFLA_BRPORT_MAB
+ *   Controls whether a port will use MAC Authentication Bypass (MAB), a
+ *   technique through which select MAC addresses may be allowed on a locked
+ *   port, without using 802.1X authentication. Packets with an unknown source
+ *   MAC address generates a "locked" FDB entry on the incoming bridge port.
+ *   The common use case is for user space to react to these bridge FDB
+ *   notifications and optionally replace the locked FDB entry with a normal
+ *   one, allowing traffic to pass for whitelisted MAC addresses.
+ *
+ *   Setting this flag also requires *IFLA_BRPORT_LOCKED* and
+ *   *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized
+ *   data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic
+ *   FDB entries installed by user space (as replacements for the locked FDB
+ *   entries) to be refreshed and/or aged out.
+ *
+ * @IFLA_BRPORT_MCAST_N_GROUPS
+ *
+ * @IFLA_BRPORT_MCAST_MAX_GROUPS
+ *   Sets the maximum number of MDB entries that can be registered for a
+ *   given port. Attempts to register more MDB entries at the port than this
+ *   limit allows will be rejected, whether they are done through netlink
+ *   (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
+ *   limit of 0 disables the limit. The default value is 0.
+ *
+ * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression is
+ *   enabled for a given port. By default this flag is off.
+ *
+ *   Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS*
+ *   is enabled for a given port.
+ *
+ * @IFLA_BRPORT_BACKUP_NHID
+ *   The FDB nexthop object ID to attach to packets being redirected to a
+ *   backup port that has VLAN tunnel mapping enabled (via the
+ *   *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has
+ *   the effect of not attaching any ID.
+ */
 enum {
 	IFLA_BRPORT_UNSPEC,
 	IFLA_BRPORT_STATE,	/* Spanning tree state     */
@@ -564,6 +1090,10 @@ enum {
 	IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
 	IFLA_BRPORT_LOCKED,
 	IFLA_BRPORT_MAB,
+	IFLA_BRPORT_MCAST_N_GROUPS,
+	IFLA_BRPORT_MCAST_MAX_GROUPS,
+	IFLA_BRPORT_NEIGH_VLAN_SUPPRESS,
+	IFLA_BRPORT_BACKUP_NHID,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
@@ -630,6 +1160,7 @@ enum {
 	IFLA_MACVLAN_MACADDR_COUNT,
 	IFLA_MACVLAN_BC_QUEUE_LEN,
 	IFLA_MACVLAN_BC_QUEUE_LEN_USED,
+	IFLA_MACVLAN_BC_CUTOFF,
 	__IFLA_MACVLAN_MAX,
 };
 
@@ -748,6 +1279,30 @@ struct tunnel_msg {
 	__u32 ifindex;
 };
 
+/* netkit section */
+enum netkit_action {
+	NETKIT_NEXT	= -1,
+	NETKIT_PASS	= 0,
+	NETKIT_DROP	= 2,
+	NETKIT_REDIRECT	= 7,
+};
+
+enum netkit_mode {
+	NETKIT_L2,
+	NETKIT_L3,
+};
+
+enum {
+	IFLA_NETKIT_UNSPEC,
+	IFLA_NETKIT_PEER_INFO,
+	IFLA_NETKIT_PRIMARY,
+	IFLA_NETKIT_POLICY,
+	IFLA_NETKIT_PEER_POLICY,
+	IFLA_NETKIT_MODE,
+	__IFLA_NETKIT_MAX,
+};
+#define IFLA_NETKIT_MAX	(__IFLA_NETKIT_MAX - 1)
+
 /* VXLAN section */
 
 /* include statistics in the dump */
@@ -821,6 +1376,8 @@ enum {
 	IFLA_VXLAN_TTL_INHERIT,
 	IFLA_VXLAN_DF,
 	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
+	IFLA_VXLAN_LOCALBYPASS,
+	IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
 	__IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
@@ -838,6 +1395,13 @@ enum ifla_vxlan_df {
 	VXLAN_DF_MAX = __VXLAN_DF_END - 1,
 };
 
+enum ifla_vxlan_label_policy {
+	VXLAN_LABEL_FIXED = 0,
+	VXLAN_LABEL_INHERIT = 1,
+	__VXLAN_LABEL_END,
+	VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
+};
+
 /* GENEVE section */
 enum {
 	IFLA_GENEVE_UNSPEC,
@@ -941,6 +1505,7 @@ enum {
 	IFLA_BOND_AD_LACP_ACTIVE,
 	IFLA_BOND_MISSED_MAX,
 	IFLA_BOND_NS_IP6_TARGET,
+	IFLA_BOND_COUPLED_CONTROL,
 	__IFLA_BOND_MAX,
 };
 
@@ -1383,7 +1948,9 @@ enum {
 
 enum {
 	IFLA_DSA_UNSPEC,
-	IFLA_DSA_MASTER,
+	IFLA_DSA_CONDUIT,
+	/* Deprecated, use IFLA_DSA_CONDUIT instead */
+	IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
 	__IFLA_DSA_MAX,
 };
 
diff --git a/src/basic/linux/in.h b/src/basic/linux/in.h
index 07a4cb1..e682ab6 100644
--- a/src/basic/linux/in.h
+++ b/src/basic/linux/in.h
@@ -162,6 +162,8 @@ struct in_addr {
 #define MCAST_MSFILTER			48
 #define IP_MULTICAST_ALL		49
 #define IP_UNICAST_IF			50
+#define IP_LOCAL_PORT_RANGE		51
+#define IP_PROTOCOL			52
 
 #define MCAST_EXCLUDE	0
 #define MCAST_INCLUDE	1
diff --git a/src/basic/linux/in6.h b/src/basic/linux/in6.h
index c4c53a9..ff8d21f 100644
--- a/src/basic/linux/in6.h
+++ b/src/basic/linux/in6.h
@@ -145,7 +145,7 @@ struct in6_flowlabel_req {
 #define IPV6_TLV_PADN		1
 #define IPV6_TLV_ROUTERALERT	5
 #define IPV6_TLV_CALIPSO	7	/* RFC 5570 */
-#define IPV6_TLV_IOAM		49	/* TEMPORARY IANA allocation for IOAM */
+#define IPV6_TLV_IOAM		49	/* RFC 9486 */
 #define IPV6_TLV_JUMBO		194
 #define IPV6_TLV_HAO		201	/* home address option */
 
diff --git a/src/basic/linux/magic.h b/src/basic/linux/magic.h
new file mode 100644
index 0000000..1b40a96
--- /dev/null
+++ b/src/basic/linux/magic.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_MAGIC_H__
+#define __LINUX_MAGIC_H__
+
+#define ADFS_SUPER_MAGIC	0xadf5
+#define AFFS_SUPER_MAGIC	0xadff
+#define AFS_SUPER_MAGIC                0x5346414F
+#define AUTOFS_SUPER_MAGIC	0x0187
+#define CEPH_SUPER_MAGIC	0x00c36400
+#define CODA_SUPER_MAGIC	0x73757245
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
+#define DEBUGFS_MAGIC          0x64626720
+#define SECURITYFS_MAGIC	0x73636673
+#define SELINUX_MAGIC		0xf97cff8c
+#define SMACK_MAGIC		0x43415d53	/* "SMAC" */
+#define RAMFS_MAGIC		0x858458f6	/* some random number */
+#define TMPFS_MAGIC		0x01021994
+#define HUGETLBFS_MAGIC 	0x958458f6	/* some random number */
+#define SQUASHFS_MAGIC		0x73717368
+#define ECRYPTFS_SUPER_MAGIC	0xf15f
+#define EFS_SUPER_MAGIC		0x414A53
+#define EROFS_SUPER_MAGIC_V1	0xE0F5E1E2
+#define EXT2_SUPER_MAGIC	0xEF53
+#define EXT3_SUPER_MAGIC	0xEF53
+#define XENFS_SUPER_MAGIC	0xabba1974
+#define EXT4_SUPER_MAGIC	0xEF53
+#define BTRFS_SUPER_MAGIC	0x9123683E
+#define NILFS_SUPER_MAGIC	0x3434
+#define F2FS_SUPER_MAGIC	0xF2F52010
+#define HPFS_SUPER_MAGIC	0xf995e849
+#define ISOFS_SUPER_MAGIC	0x9660
+#define JFFS2_SUPER_MAGIC	0x72b6
+#define XFS_SUPER_MAGIC		0x58465342	/* "XFSB" */
+#define PSTOREFS_MAGIC		0x6165676C
+#define EFIVARFS_MAGIC		0xde5e81e4
+#define HOSTFS_SUPER_MAGIC	0x00c0ffee
+#define OVERLAYFS_SUPER_MAGIC	0x794c7630
+#define FUSE_SUPER_MAGIC	0x65735546
+
+#define MINIX_SUPER_MAGIC	0x137F		/* minix v1 fs, 14 char names */
+#define MINIX_SUPER_MAGIC2	0x138F		/* minix v1 fs, 30 char names */
+#define MINIX2_SUPER_MAGIC	0x2468		/* minix v2 fs, 14 char names */
+#define MINIX2_SUPER_MAGIC2	0x2478		/* minix v2 fs, 30 char names */
+#define MINIX3_SUPER_MAGIC	0x4d5a		/* minix v3 fs, 60 char names */
+
+#define MSDOS_SUPER_MAGIC	0x4d44		/* MD */
+#define EXFAT_SUPER_MAGIC	0x2011BAB0
+#define NCP_SUPER_MAGIC		0x564c		/* Guess, what 0x564c is :-) */
+#define NFS_SUPER_MAGIC		0x6969
+#define OCFS2_SUPER_MAGIC	0x7461636f
+#define OPENPROM_SUPER_MAGIC	0x9fa1
+#define QNX4_SUPER_MAGIC	0x002f		/* qnx4 fs detection */
+#define QNX6_SUPER_MAGIC	0x68191122	/* qnx6 fs detection */
+#define AFS_FS_MAGIC		0x6B414653
+
+
+#define REISERFS_SUPER_MAGIC	0x52654973	/* used by gcc */
+					/* used by file system utilities that
+	                                   look at the superblock, etc.  */
+#define REISERFS_SUPER_MAGIC_STRING	"ReIsErFs"
+#define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
+#define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
+
+#define SMB_SUPER_MAGIC		0x517B
+#define CIFS_SUPER_MAGIC	0xFF534D42      /* the first four bytes of SMB PDUs */
+#define SMB2_SUPER_MAGIC	0xFE534D42
+
+#define CGROUP_SUPER_MAGIC	0x27e0eb
+#define CGROUP2_SUPER_MAGIC	0x63677270
+
+#define RDTGROUP_SUPER_MAGIC	0x7655821
+
+#define STACK_END_MAGIC		0x57AC6E9D
+
+#define TRACEFS_MAGIC          0x74726163
+
+#define V9FS_MAGIC		0x01021997
+
+#define BDEVFS_MAGIC            0x62646576
+#define DAXFS_MAGIC             0x64646178
+#define BINFMTFS_MAGIC          0x42494e4d
+#define DEVPTS_SUPER_MAGIC	0x1cd1
+#define BINDERFS_SUPER_MAGIC	0x6c6f6f70
+#define FUTEXFS_SUPER_MAGIC	0xBAD1DEA
+#define PIPEFS_MAGIC            0x50495045
+#define PROC_SUPER_MAGIC	0x9fa0
+#define SOCKFS_MAGIC		0x534F434B
+#define SYSFS_MAGIC		0x62656572
+#define USBDEVICE_SUPER_MAGIC	0x9fa2
+#define MTD_INODE_FS_MAGIC      0x11307854
+#define ANON_INODE_FS_MAGIC	0x09041934
+#define BTRFS_TEST_MAGIC	0x73727279
+#define NSFS_MAGIC		0x6e736673
+#define BPF_FS_MAGIC		0xcafe4a11
+#define AAFS_MAGIC		0x5a3c69f0
+#define ZONEFS_MAGIC		0x5a4f4653
+
+/* Since UDF 2.01 is ISO 13346 based... */
+#define UDF_SUPER_MAGIC		0x15013346
+#define DMA_BUF_MAGIC		0x444d4142	/* "DMAB" */
+#define DEVMEM_MAGIC		0x454d444d	/* "DMEM" */
+#define SECRETMEM_MAGIC		0x5345434d	/* "SECM" */
+#define PID_FS_MAGIC		0x50494446	/* "PIDF" */
+
+#endif /* __LINUX_MAGIC_H__ */
diff --git a/src/basic/linux/netfilter.h b/src/basic/linux/netfilter.h
new file mode 100644
index 0000000..30c045b
--- /dev/null
+++ b/src/basic/linux/netfilter.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_NETFILTER_H
+#define __LINUX_NETFILTER_H
+
+#include <linux/types.h>
+
+#include <linux/in.h>
+#include <linux/in6.h>
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5	/* Deprecated, for userspace nf_queue compatibility. */
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING,
+	NF_INET_LOCAL_IN,
+	NF_INET_FORWARD,
+	NF_INET_LOCAL_OUT,
+	NF_INET_POST_ROUTING,
+	NF_INET_NUMHOOKS,
+	NF_INET_INGRESS = NF_INET_NUMHOOKS,
+};
+
+enum nf_dev_hooks {
+	NF_NETDEV_INGRESS,
+	NF_NETDEV_EGRESS,
+	NF_NETDEV_NUMHOOKS
+};
+
+enum {
+	NFPROTO_UNSPEC =  0,
+	NFPROTO_INET   =  1,
+	NFPROTO_IPV4   =  2,
+	NFPROTO_ARP    =  3,
+	NFPROTO_NETDEV =  5,
+	NFPROTO_BRIDGE =  7,
+	NFPROTO_IPV6   = 10,
+	NFPROTO_DECNET = 12,
+	NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+	__u32		all[4];
+	__be32		ip;
+	__be32		ip6[4];
+	struct in_addr	in;
+	struct in6_addr	in6;
+};
+
+#endif /* __LINUX_NETFILTER_H */
diff --git a/src/basic/linux/netfilter/nf_tables.h b/src/basic/linux/netfilter/nf_tables.h
index cfa844d..aa4094c 100644
--- a/src/basic/linux/netfilter/nf_tables.h
+++ b/src/basic/linux/netfilter/nf_tables.h
@@ -98,6 +98,14 @@ enum nft_verdicts {
  * @NFT_MSG_GETFLOWTABLE: get flow table (enum nft_flowtable_attributes)
  * @NFT_MSG_DELFLOWTABLE: delete flow table (enum nft_flowtable_attributes)
  * @NFT_MSG_GETRULE_RESET: get rules and reset stateful expressions (enum nft_obj_attributes)
+ * @NFT_MSG_DESTROYTABLE: destroy a table (enum nft_table_attributes)
+ * @NFT_MSG_DESTROYCHAIN: destroy a chain (enum nft_chain_attributes)
+ * @NFT_MSG_DESTROYRULE: destroy a rule (enum nft_rule_attributes)
+ * @NFT_MSG_DESTROYSET: destroy a set (enum nft_set_attributes)
+ * @NFT_MSG_DESTROYSETELEM: destroy a set element (enum nft_set_elem_attributes)
+ * @NFT_MSG_DESTROYOBJ: destroy a stateful object (enum nft_object_attributes)
+ * @NFT_MSG_DESTROYFLOWTABLE: destroy flow table (enum nft_flowtable_attributes)
+ * @NFT_MSG_GETSETELEM_RESET: get set elements and reset attached stateful expressions (enum nft_set_elem_attributes)
  */
 enum nf_tables_msg_types {
 	NFT_MSG_NEWTABLE,
@@ -126,6 +134,14 @@ enum nf_tables_msg_types {
 	NFT_MSG_GETFLOWTABLE,
 	NFT_MSG_DELFLOWTABLE,
 	NFT_MSG_GETRULE_RESET,
+	NFT_MSG_DESTROYTABLE,
+	NFT_MSG_DESTROYCHAIN,
+	NFT_MSG_DESTROYRULE,
+	NFT_MSG_DESTROYSET,
+	NFT_MSG_DESTROYSETELEM,
+	NFT_MSG_DESTROYOBJ,
+	NFT_MSG_DESTROYFLOWTABLE,
+	NFT_MSG_GETSETELEM_RESET,
 	NFT_MSG_MAX,
 };
 
@@ -163,13 +179,17 @@ enum nft_hook_attributes {
  * enum nft_table_flags - nf_tables table flags
  *
  * @NFT_TABLE_F_DORMANT: this table is not active
+ * @NFT_TABLE_F_OWNER:   this table is owned by a process
+ * @NFT_TABLE_F_PERSIST: this table shall outlive its owner
  */
 enum nft_table_flags {
 	NFT_TABLE_F_DORMANT	= 0x1,
 	NFT_TABLE_F_OWNER	= 0x2,
+	NFT_TABLE_F_PERSIST	= 0x4,
 };
 #define NFT_TABLE_F_MASK	(NFT_TABLE_F_DORMANT | \
-				 NFT_TABLE_F_OWNER)
+				 NFT_TABLE_F_OWNER | \
+				 NFT_TABLE_F_PERSIST)
 
 /**
  * enum nft_table_attributes - nf_tables table netlink attributes
@@ -247,6 +267,7 @@ enum nft_chain_attributes {
  * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN)
  * @NFTA_RULE_ID: uniquely identifies a rule in a transaction (NLA_U32)
  * @NFTA_RULE_POSITION_ID: transaction unique identifier of the previous rule (NLA_U32)
+ * @NFTA_RULE_CHAIN_ID: add the rule to chain by ID, alternative to @NFTA_RULE_CHAIN (NLA_U32)
  */
 enum nft_rule_attributes {
 	NFTA_RULE_UNSPEC,
@@ -268,9 +289,11 @@ enum nft_rule_attributes {
 /**
  * enum nft_rule_compat_flags - nf_tables rule compat flags
  *
+ * @NFT_RULE_COMPAT_F_UNUSED: unused
  * @NFT_RULE_COMPAT_F_INV: invert the check result
  */
 enum nft_rule_compat_flags {
+	NFT_RULE_COMPAT_F_UNUSED = (1 << 0),
 	NFT_RULE_COMPAT_F_INV	= (1 << 1),
 	NFT_RULE_COMPAT_F_MASK	= NFT_RULE_COMPAT_F_INV,
 };
@@ -671,7 +694,7 @@ enum nft_range_ops {
  * enum nft_range_attributes - nf_tables range expression netlink attributes
  *
  * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers)
- * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops)
+ * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_range_ops)
  * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes)
  * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes)
  */
@@ -845,12 +868,14 @@ enum nft_exthdr_flags {
  * @NFT_EXTHDR_OP_TCP: match against tcp options
  * @NFT_EXTHDR_OP_IPV4: match against ipv4 options
  * @NFT_EXTHDR_OP_SCTP: match against sctp chunks
+ * @NFT_EXTHDR_OP_DCCP: match against dccp otions
  */
 enum nft_exthdr_op {
 	NFT_EXTHDR_OP_IPV6,
 	NFT_EXTHDR_OP_TCPOPT,
 	NFT_EXTHDR_OP_IPV4,
 	NFT_EXTHDR_OP_SCTP,
+	NFT_EXTHDR_OP_DCCP,
 	__NFT_EXTHDR_OP_MAX
 };
 #define NFT_EXTHDR_OP_MAX	(__NFT_EXTHDR_OP_MAX - 1)
@@ -864,7 +889,7 @@ enum nft_exthdr_op {
  * @NFTA_EXTHDR_LEN: extension header length (NLA_U32)
  * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32)
  * @NFTA_EXTHDR_OP: option match type (NLA_U32)
- * @NFTA_EXTHDR_SREG: option match type (NLA_U32)
+ * @NFTA_EXTHDR_SREG: source register (NLA_U32: nft_registers)
  */
 enum nft_exthdr_attributes {
 	NFTA_EXTHDR_UNSPEC,
@@ -917,6 +942,7 @@ enum nft_exthdr_attributes {
  * @NFT_META_TIME_HOUR: hour of day (in seconds)
  * @NFT_META_SDIF: slave device interface index
  * @NFT_META_SDIFNAME: slave device interface name
+ * @NFT_META_BRI_BROUTE: packet br_netfilter_broute bit
  */
 enum nft_meta_keys {
 	NFT_META_LEN,
@@ -955,6 +981,7 @@ enum nft_meta_keys {
 	NFT_META_TIME_HOUR,
 	NFT_META_SDIF,
 	NFT_META_SDIFNAME,
+	NFT_META_BRI_BROUTE,
 	__NFT_META_IIFTYPE,
 };
 
@@ -1246,10 +1273,10 @@ enum nft_last_attributes {
 /**
  * enum nft_log_attributes - nf_tables log expression netlink attributes
  *
- * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32)
+ * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U16)
  * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING)
  * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32)
- * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32)
+ * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U16)
  * @NFTA_LOG_LEVEL: log level (NLA_U32)
  * @NFTA_LOG_FLAGS: logging flags (NLA_U32)
  */
diff --git a/src/basic/linux/netlink.h b/src/basic/linux/netlink.h
index e2ae82e..f87aaf2 100644
--- a/src/basic/linux/netlink.h
+++ b/src/basic/linux/netlink.h
@@ -298,6 +298,8 @@ struct nla_bitfield32 {
  *	entry has attributes again, the policy for those inner ones
  *	and the corresponding maxtype may be specified.
  * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute
+ * @NL_ATTR_TYPE_SINT: 32-bit or 64-bit signed attribute, aligned to 4B
+ * @NL_ATTR_TYPE_UINT: 32-bit or 64-bit unsigned attribute, aligned to 4B
  */
 enum netlink_attribute_type {
 	NL_ATTR_TYPE_INVALID,
@@ -322,6 +324,9 @@ enum netlink_attribute_type {
 	NL_ATTR_TYPE_NESTED_ARRAY,
 
 	NL_ATTR_TYPE_BITFIELD32,
+
+	NL_ATTR_TYPE_SINT,
+	NL_ATTR_TYPE_UINT,
 };
 
 /**
diff --git a/src/basic/linux/nexthop.h b/src/basic/linux/nexthop.h
index d8ffa8c..dd8787f 100644
--- a/src/basic/linux/nexthop.h
+++ b/src/basic/linux/nexthop.h
@@ -30,6 +30,9 @@ enum {
 
 #define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1)
 
+#define NHA_OP_FLAG_DUMP_STATS		BIT(0)
+#define NHA_OP_FLAG_DUMP_HW_STATS	BIT(1)
+
 enum {
 	NHA_UNSPEC,
 	NHA_ID,		/* u32; id for nexthop. id == 0 means auto-assign */
@@ -60,6 +63,18 @@ enum {
 	/* nested; nexthop bucket attributes */
 	NHA_RES_BUCKET,
 
+	/* u32; operation-specific flags */
+	NHA_OP_FLAGS,
+
+	/* nested; nexthop group stats */
+	NHA_GROUP_STATS,
+
+	/* u32; nexthop hardware stats enable */
+	NHA_HW_STATS_ENABLE,
+
+	/* u32; read-only; whether any driver collects HW stats */
+	NHA_HW_STATS_USED,
+
 	__NHA_MAX,
 };
 
@@ -101,4 +116,34 @@ enum {
 
 #define NHA_RES_BUCKET_MAX	(__NHA_RES_BUCKET_MAX - 1)
 
+enum {
+	NHA_GROUP_STATS_UNSPEC,
+
+	/* nested; nexthop group entry stats */
+	NHA_GROUP_STATS_ENTRY,
+
+	__NHA_GROUP_STATS_MAX,
+};
+
+#define NHA_GROUP_STATS_MAX	(__NHA_GROUP_STATS_MAX - 1)
+
+enum {
+	NHA_GROUP_STATS_ENTRY_UNSPEC,
+
+	/* u32; nexthop id of the nexthop group entry */
+	NHA_GROUP_STATS_ENTRY_ID,
+
+	/* uint; number of packets forwarded via the nexthop group entry */
+	NHA_GROUP_STATS_ENTRY_PACKETS,
+
+	/* uint; number of packets forwarded via the nexthop group entry in
+	 * hardware
+	 */
+	NHA_GROUP_STATS_ENTRY_PACKETS_HW,
+
+	__NHA_GROUP_STATS_ENTRY_MAX,
+};
+
+#define NHA_GROUP_STATS_ENTRY_MAX	(__NHA_GROUP_STATS_ENTRY_MAX - 1)
+
 #endif
diff --git a/src/basic/linux/nl80211.h b/src/basic/linux/nl80211.h
index c14a91b..f23ecbd 100644
--- a/src/basic/linux/nl80211.h
+++ b/src/basic/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -72,7 +72,7 @@
  * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
  * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
  *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
+ *    or capability information; this just exists to avoid race conditions
  *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
  *    to add rate and capability information to the station and at the same
  *    time mark it authorized.
@@ -87,7 +87,7 @@
  * DOC: Frame transmission/registration support
  *
  * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
  * that are not being handled by the kernel. This includes, for example,
  * certain classes of action frames that cannot be handled in the kernel
  * for various reasons.
@@ -113,7 +113,7 @@
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
@@ -123,7 +123,7 @@
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
@@ -135,7 +135,7 @@
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@@ -164,17 +164,17 @@
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
- * b) Coalescing buffer in hardware reaches it's limit.
+ * b) Coalescing buffer in hardware reaches its limit.
  * c) Packet doesn't match any of the configured coalesce rules.
  *
  * User needs to configure following parameters for creating a coalesce
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 
@@ -213,7 +213,7 @@
 /**
  * DOC: FILS shared key authentication offload
  *
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
@@ -239,7 +239,7 @@
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@@ -290,12 +290,12 @@
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * any peers that have peer-specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
+ * All this configuration is valid only for STA's current connection,
+ * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
@@ -326,7 +326,7 @@
 /**
  * DOC: Multi-Link Operation
  *
- * In Multi-Link Operation, a connection between to MLDs utilizes multiple
+ * In Multi-Link Operation, a connection between two MLDs utilizes multiple
  * links. To use this in nl80211, various commands and responses now need
  * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
  * Additionally, various commands that need to operate on a specific link
@@ -335,6 +335,15 @@
  */
 
 /**
+ * DOC: OWE DH IE handling offload
+ *
+ * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate
+ * kernel/application space to avoid DH IE handling. When this flag is
+ * advertised, the driver/device will take care of DH IE inclusion and
+ * processing of peer DH IE to generate PMK.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -424,11 +433,13 @@
  *	interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
  *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
+ *	by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in
+ *	%NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and
  *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
  *	of disconnection indication should be sent to the station
  *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
+ *	frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
+ *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
@@ -511,7 +522,7 @@
  *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
+ *	These attributes are mutually exclusive,
  *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *	If for some reason scheduled scan is aborted by the driver, all scan
@@ -542,7 +553,7 @@
  *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *	is brought down while a scheduled scan was running.
  *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@@ -553,12 +564,13 @@
  *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	advertised by a FILS capable AP identifying the scope of PMKSA in an
  *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
+ *	authentication. Additionally in case of SAE offload and OWE offloads
+ *	PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@@ -597,7 +609,7 @@
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
  *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *	authentication type. %NL80211_ATTR_IE is used to define IEs
  *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@@ -806,7 +818,7 @@
  *	reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	(identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *	In case multiple channels are supported by the device, the mechanism
  *	with which it switches channels is implementation-defined.
  *	When a monitor interface is given, it can only switch channel while
@@ -878,7 +890,7 @@
  *	inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
+ *	of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *	In addition, this can be used as an event to request userspace to take
@@ -914,7 +926,7 @@
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	acknowledged. This is used to allow timing out inactive clients. Uses
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *	up the event with the request. The event includes the same data and
@@ -1125,11 +1137,15 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- *	completed successfully. Drivers that support 4 way handshake offload
- *	should send this event after indicating 802.1X FT assocation with
- *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- *	should be indicated instead.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
+ *	open for regular data traffic. For STA/P2P-client, this event is sent
+ *	with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
+ *	client MAC address.
+ *	Drivers that support 4 way handshake offload should send this event for
+ *	STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ *	NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ *	handshake offload should send this event on successful completion of
+ *	4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
@@ -1166,6 +1182,23 @@
  *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
  *	command interface.
  *
+ *	Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in
+ *	%NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO
+ *	during the authentication offload in STA mode while connecting to MLD
+ *	APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability
+ *	in %NL80211_CMD_CONNECT to know whether the user space supports enabling
+ *	MLO during the authentication offload or not.
+ *	User space should enable MLO during the authentication only when it
+ *	receives the AP MLD address in authentication offload request. User
+ *	space shouldn't enable MLO when the authentication offload request
+ *	doesn't indicate the AP MLD address even if the AP is MLO capable.
+ *	User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and
+ *	interface address identified by %NL80211_ATTR_IFINDEX as self MLD
+ *	address. User space and host driver to use MLD addresses in RA, TA and
+ *	BSSID fields of the frames between them, and host driver translates the
+ *	MLD addresses to/from link addresses based on the link chosen for the
+ *	authentication.
+ *
  *	Host driver reports this status on an authentication failure to the
  *	user space through the connect result as the user space would have
  *	initiated the connection through the connect request.
@@ -1281,6 +1314,26 @@
  * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station
  * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station
  *
+ * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing
+ *	measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC
+ *	is included, enable/disable HW timestamping only for frames to/from the
+ *	specified MAC address. Otherwise enable/disable HW timestamping for
+ *	all TM/FTM frames (including ones that were enabled with specific MAC
+ *	address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable
+ *	HW timestamping.
+ *	The number of peers that HW timestamping can be enabled for concurrently
+ *	is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
+ *
+ * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD
+ *	setup links due to AP MLD removing the corresponding affiliated APs with
+ *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
+ *	information about the removed STA MLD setup links.
+ *
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ *      TID to Link mapping for downlink/uplink traffic.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1532,6 +1585,12 @@ enum nl80211_commands {
 	NL80211_CMD_MODIFY_LINK_STA,
 	NL80211_CMD_REMOVE_LINK_STA,
 
+	NL80211_CMD_SET_HW_TIMESTAMP,
+
+	NL80211_CMD_LINKS_REMOVED,
+
+	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1789,7 +1848,7 @@ enum nl80211_commands {
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
+ *	frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -1926,10 +1985,10 @@ enum nl80211_commands {
  *	bit. Depending on which antennas are selected in the bitmap, 802.11n
  *	drivers can derive which chainmasks to use (if all antennas belonging to
  *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
+ *	a chain has diversity antennas whether diversity should be used or not.
  *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Non-802.11n drivers can derive whether to use diversity or not.
  *	Drivers may reject configurations or RX/TX mask combinations they cannot
  *	support by returning -EINVAL.
  *
@@ -2499,7 +2558,7 @@ enum nl80211_commands {
  *	from successful FILS authentication and is used with
  *	%NL80211_CMD_CONNECT.
  *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
@@ -2653,11 +2712,13 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
  *	discovery. It is a nested attribute, see
- *	&enum nl80211_fils_discovery_attributes.
+ *	&enum nl80211_fils_discovery_attributes. Userspace should pass an empty
+ *	nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
  *	unsolicited broadcast probe response. It is a nested attribute, see
- *	&enum nl80211_unsol_bcast_probe_resp_attributes.
+ *	&enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty
+ *	nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -2751,6 +2812,50 @@ enum nl80211_commands {
  *	the incoming frame RX timestamp.
  * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
  *	(re)associations.
+ *
+ * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest
+ *	bit corresponds to the lowest 20 MHz channel. Each bit set to 1
+ *	indicates that the sub-channel is punctured. Higher 16 bits are
+ *	reserved.
+ *
+ * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW
+ *	timestamping can be enabled for concurrently (u16), a wiphy attribute.
+ *	A value of 0xffff indicates setting for all peers (i.e. not specifying
+ *	an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported.
+ * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should
+ *	be enabled or not (flag attribute).
+ *
+ * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
+ *	reduced neighbor report (RNR) elements. This attribute can be used
+ *	only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled.
+ *	Userspace is responsible for splitting the RNR into multiple
+ *	elements such that each element excludes the non-transmitting
+ *	profiles already included in the MBSSID element
+ *	(%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon
+ *	will be generated by adding MBSSID and RNR elements at the same
+ *	index. If the userspace includes more RNR elements than number of
+ *	MBSSID elements then these will be added in every EMA beacon.
+ *
+ * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
+ *	disabled.
+ *
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ *	include BSSes that can only be used in restricted scenarios and/or
+ *	cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ *
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ *	are used on this connection
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3280,6 +3385,22 @@ enum nl80211_attrs {
 	NL80211_ATTR_RX_HW_TIMESTAMP,
 	NL80211_ATTR_TD_BITMAP,
 
+	NL80211_ATTR_PUNCT_BITMAP,
+
+	NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,
+	NL80211_ATTR_HW_TIMESTAMP_ENABLED,
+
+	NL80211_ATTR_EMA_RNR_ELEMS,
+
+	NL80211_ATTR_MLO_LINK_DISABLED,
+
+	NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+
+	NL80211_ATTR_MLO_TTLM_DLINK,
+	NL80211_ATTR_MLO_TTLM_ULINK,
+
+	NL80211_ATTR_ASSOC_SPP_AMSDU,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3420,6 +3541,7 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
  *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
  *	previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -3432,6 +3554,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_AUTHENTICATED,
 	NL80211_STA_FLAG_TDLS_PEER,
 	NL80211_STA_FLAG_ASSOCIATED,
+	NL80211_STA_FLAG_SPP_AMSDU,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -3606,6 +3729,13 @@ enum nl80211_eht_ru_alloc {
  *	(u8, see &enum nl80211_eht_gi)
  * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
+ * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
+ * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
+ * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
+ * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
+ * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
+ * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
+ * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3632,6 +3762,13 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_EHT_NSS,
 	NL80211_RATE_INFO_EHT_GI,
 	NL80211_RATE_INFO_EHT_RU_ALLOC,
+	NL80211_RATE_INFO_S1G_MCS,
+	NL80211_RATE_INFO_S1G_NSS,
+	NL80211_RATE_INFO_1_MHZ_WIDTH,
+	NL80211_RATE_INFO_2_MHZ_WIDTH,
+	NL80211_RATE_INFO_4_MHZ_WIDTH,
+	NL80211_RATE_INFO_8_MHZ_WIDTH,
+	NL80211_RATE_INFO_16_MHZ_WIDTH,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -4000,6 +4137,10 @@ enum nl80211_band_iftype_attr {
  * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
  *	the allowed channel bandwidth configurations.
  *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS
+ *	set subfield, as in the S1G information IE, 5 bytes
+ * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the
+ *	S1G information IE, 10 bytes
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -4020,6 +4161,9 @@ enum nl80211_band_attr {
 	NL80211_BAND_ATTR_EDMG_CHANNELS,
 	NL80211_BAND_ATTR_EDMG_BW_CONFIG,
 
+	NL80211_BAND_ATTR_S1G_MCS_NSS_SET,
+	NL80211_BAND_ATTR_S1G_CAPA,
+
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
 	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
@@ -4065,7 +4209,7 @@ enum nl80211_wmm_rule {
  *	(100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *	this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *	channel as the control channel
@@ -4119,6 +4263,19 @@ enum nl80211_wmm_rule {
  *	as the primary or any of the secondary channels isn't possible
  * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
+ *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
+ *	mode despite other (regulatory) restrictions, even if the channel is
+ *	otherwise completely disabled.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4157,6 +4314,11 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_16MHZ,
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
+	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4169,6 +4331,10 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
 					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -4257,6 +4423,8 @@ enum nl80211_reg_type {
  * 	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
+ * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
+ *	This could be negative.
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *	currently defined
  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -4274,6 +4442,8 @@ enum nl80211_reg_rule_attr {
 
 	NL80211_ATTR_DFS_CAC_TIME,
 
+	NL80211_ATTR_POWER_RULE_PSD,
+
 	/* keep last */
 	__NL80211_REG_RULE_ATTR_AFTER_LAST,
 	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -4302,14 +4472,7 @@ enum nl80211_reg_rule_attr {
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- *	band specific minimum rssi thresholds for the bands defined in
- *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- *	band shall be encapsulated in attribute with type value equals to one
- *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- *	attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -4322,7 +4485,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4356,6 +4519,14 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
+ * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+	peer-to-peer or adhoc communication under the control of a DFS master
+	which operates on the same channel (FCC-594280 D01 Section B.3).
+	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4375,6 +4546,11 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_160MHZ		= 1<<16,
 	NL80211_RRF_NO_HE		= 1<<17,
 	NL80211_RRF_NO_320MHZ		= 1<<18,
+	NL80211_RRF_NO_EHT		= 1<<19,
+	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4383,6 +4559,8 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
 #define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
+#define NL80211_RRF_NO_UHB_VLP_CLIENT	NL80211_RRF_NO_6GHZ_VLP_CLIENT
+#define NL80211_RRF_NO_UHB_AFC_CLIENT	NL80211_RRF_NO_6GHZ_AFC_CLIENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -4912,6 +5090,36 @@ enum nl80211_bss_scan_width {
 };
 
 /**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ *	including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ *	MLO connection. Note that for an MLO connection, all links including
+ *	the assoc link must have this flag set, and the assoc link must
+ *	additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+	NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+	NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ *	BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH	= 1 << 1,
+};
+
+#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
+
+/**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
@@ -4942,7 +5150,7 @@ enum nl80211_bss_scan_width {
  *	elements from a Beacon frame (bin); not present if no Beacon frame has
  *	yet been received
  * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
- *	(u32, enum nl80211_bss_scan_width)
+ *	(u32, enum nl80211_bss_scan_width) - No longer used!
  * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
  *	(not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
@@ -4963,6 +5171,14 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ *	used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ *	be used for all or some of the possible uses by the device reporting it,
+ *	even though its presence was detected.
+ *	This is a u64 attribute containing a bitmap of values from
+ *	&enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ *	if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -4990,6 +5206,8 @@ enum nl80211_bss {
 	NL80211_BSS_FREQUENCY_OFFSET,
 	NL80211_BSS_MLO_LINK_ID,
 	NL80211_BSS_MLD_ADDR,
+	NL80211_BSS_USE_FOR,
+	NL80211_BSS_CANNOT_USE_REASONS,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -5338,7 +5556,7 @@ enum nl80211_tx_rate_setting {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *	that the new configuration overrides all previous peer
  *	configurations, otherwise previous peer specific configurations
  *	should be left untouched.
@@ -5539,6 +5757,8 @@ struct nl80211_pattern_support {
  *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
  *	frequency, it means that the match occurred in more than one
  *	channel.
+ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
+ *	Wake up happened due to unprotected deauth or disassoc frame in MFP.
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  *
@@ -5566,6 +5786,7 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 	NL80211_WOWLAN_TRIG_NET_DETECT,
 	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+	NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -5721,7 +5942,7 @@ enum nl80211_attr_coalesce_rule {
 
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *	in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *	in a rule are not matched.
@@ -5820,7 +6041,7 @@ enum nl80211_if_combination_attrs {
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
+ *	state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *	this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -5869,6 +6090,7 @@ enum plink_actions {
 #define NL80211_KEK_LEN			16
 #define NL80211_KCK_EXT_LEN		24
 #define NL80211_KEK_EXT_LEN		32
+#define NL80211_KCK_EXT_LEN_32		32
 #define NL80211_REPLAY_CTR_LEN		8
 
 /**
@@ -6112,7 +6334,7 @@ enum nl80211_feature_flags {
  *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
+ *	NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *	sniffer which means that it can be configured to hear packets from
  *	certain groups which can be configured by the
@@ -6124,13 +6346,15 @@ enum nl80211_feature_flags {
  *	the BSS that the interface that requested the scan is connected to
  *	(if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
+ *	time the last beacon/probe was received. For a non-MLO connection, the
+ *	time is the TSF of the BSS that the interface that requested the scan is
+ *	connected to (if available). For an MLO connection, the time is the TSF
+ *	of the BSS corresponding with link ID specified in the scan request (if
+ *	specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ *	configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@@ -6204,8 +6428,7 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *	(set/del PMKSA operations) in AP mode.
  *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
  *
  * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
  *	to a station.
@@ -6294,6 +6517,31 @@ enum nl80211_feature_flags {
  *	might apply, e.g. no scans in progress, no offchannel operations
  *	in progress, and no active connections.
  *
+ * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables
+ *	authentication, data encryption and message integrity.
+ *
+ * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA
+ *	in authentication and deauthentication frames sent to unassociated peer
+ *	using @NL80211_CMD_FRAME.
+ *
+ * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE
+ *	handling in station mode.
+ *
+ * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
+ *	handling in AP mode.
+ *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ *	(signaling and payload protected) A-MSDUs and this shall be advertised
+ *	in the RSNXE.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6335,7 +6583,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
 	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
@@ -6362,6 +6610,13 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
 	NL80211_EXT_FEATURE_RADAR_BACKGROUND,
 	NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,
+	NL80211_EXT_FEATURE_PUNCT,
+	NL80211_EXT_FEATURE_SECURE_NAN,
+	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
+	NL80211_EXT_FEATURE_OWE_OFFLOAD,
+	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
+	NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6446,7 +6701,7 @@ enum nl80211_timeout_reason {
  *	request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ *	rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *	only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -6476,8 +6731,16 @@ enum nl80211_timeout_reason {
  * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
  *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
  *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
- * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
- *	2.4/5 GHz APs
+ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by
+ *	2.4/5 GHz APs. When the flag is set, the scan logic will use the
+ *	information from the RNR element found in beacons/probe responses
+ *	received on the 2.4/5 GHz channels to actively scan only the 6GHz
+ *	channels on which APs are expected to be found. Note that when not set,
+ *	the scan logic would scan all 6GHz channels, but since transmission of
+ *	probe requests on non-PSC channels is limited, it is highly likely that
+ *	these channels would passively be scanned. Also note that when the flag
+ *	is set, in addition to the colocated APs, PSC channels would also be
+ *	scanned if the user space has asked for it.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -6806,7 +7069,7 @@ enum nl80211_nan_func_term_reason {
  *	The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
+ *	The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *	follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@@ -7196,7 +7459,7 @@ enum nl80211_peer_measurement_attrs {
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
+ *	if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7250,7 +7513,7 @@ enum nl80211_peer_measurement_ftm_capa {
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *	ranging measurement (flag)
  *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *	mutually exclusive.
@@ -7328,7 +7591,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *	transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
+ *	that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *	busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
@@ -7489,7 +7752,7 @@ enum nl80211_iftype_akm_attributes {
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
  *	Allowed range: 0..10000 (TU = Time Unit)
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
- *	Allowed range: 0..10000 (TU = Time Unit)
+ *	Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.
  * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
  *	frame including the headers.
  *
@@ -7522,7 +7785,8 @@ enum nl80211_fils_discovery_attributes {
  *
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
  *	Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
- *	26.17.2.3.2 (AP behavior for fast passive scanning).
+ *	26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is
+ *	disabled.
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
  *	frame template (binary).
  *
diff --git a/src/basic/linux/pkt_sched.h b/src/basic/linux/pkt_sched.h
index 000eec1..a3cd0c2 100644
--- a/src/basic/linux/pkt_sched.h
+++ b/src/basic/linux/pkt_sched.h
@@ -477,115 +477,6 @@ enum {
 
 #define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
 
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO		8
-#define TC_CBQ_MAXLEVEL		8
-#define TC_CBQ_DEF_EWMA		5
-
-struct tc_cbq_lssopt {
-	unsigned char	change;
-	unsigned char	flags;
-#define TCF_CBQ_LSS_BOUNDED	1
-#define TCF_CBQ_LSS_ISOLATED	2
-	unsigned char  	ewma_log;
-	unsigned char  	level;
-#define TCF_CBQ_LSS_FLAGS	1
-#define TCF_CBQ_LSS_EWMA	2
-#define TCF_CBQ_LSS_MAXIDLE	4
-#define TCF_CBQ_LSS_MINIDLE	8
-#define TCF_CBQ_LSS_OFFTIME	0x10
-#define TCF_CBQ_LSS_AVPKT	0x20
-	__u32		maxidle;
-	__u32		minidle;
-	__u32		offtime;
-	__u32		avpkt;
-};
-
-struct tc_cbq_wrropt {
-	unsigned char	flags;
-	unsigned char	priority;
-	unsigned char	cpriority;
-	unsigned char	__reserved;
-	__u32		allot;
-	__u32		weight;
-};
-
-struct tc_cbq_ovl {
-	unsigned char	strategy;
-#define	TC_CBQ_OVL_CLASSIC	0
-#define	TC_CBQ_OVL_DELAY	1
-#define	TC_CBQ_OVL_LOWPRIO	2
-#define	TC_CBQ_OVL_DROP		3
-#define	TC_CBQ_OVL_RCLASSIC	4
-	unsigned char	priority2;
-	__u16		pad;
-	__u32		penalty;
-};
-
-struct tc_cbq_police {
-	unsigned char	police;
-	unsigned char	__res1;
-	unsigned short	__res2;
-};
-
-struct tc_cbq_fopt {
-	__u32		split;
-	__u32		defmap;
-	__u32		defchange;
-};
-
-struct tc_cbq_xstats {
-	__u32		borrows;
-	__u32		overactions;
-	__s32		avgidle;
-	__s32		undertime;
-};
-
-enum {
-	TCA_CBQ_UNSPEC,
-	TCA_CBQ_LSSOPT,
-	TCA_CBQ_WRROPT,
-	TCA_CBQ_FOPT,
-	TCA_CBQ_OVL_STRATEGY,
-	TCA_CBQ_RATE,
-	TCA_CBQ_RTAB,
-	TCA_CBQ_POLICE,
-	__TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
-	TCA_DSMARK_UNSPEC,
-	TCA_DSMARK_INDICES,
-	TCA_DSMARK_DEFAULT_INDEX,
-	TCA_DSMARK_SET_TC_INDEX,
-	TCA_DSMARK_MASK,
-	TCA_DSMARK_VALUE,
-	__TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM  section */
-
-enum {
-	TCA_ATM_UNSPEC,
-	TCA_ATM_FD,		/* file/socket descriptor */
-	TCA_ATM_PTR,		/* pointer to descriptor - later */
-	TCA_ATM_HDR,		/* LL header */
-	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
-	TCA_ATM_ADDR,		/* PVC address (for output only) */
-	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
-	__TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
-
 /* Network emulator */
 
 enum {
@@ -603,6 +494,7 @@ enum {
 	TCA_NETEM_JITTER64,
 	TCA_NETEM_SLOT,
 	TCA_NETEM_SLOT_DIST,
+	TCA_NETEM_PRNG_SEED,
 	__TCA_NETEM_MAX,
 };
 
@@ -719,6 +611,11 @@ enum {
 
 #define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1)
 
+enum {
+	TC_FP_EXPRESS = 1,
+	TC_FP_PREEMPTIBLE = 2,
+};
+
 struct tc_mqprio_qopt {
 	__u8	num_tc;
 	__u8	prio_tc_map[TC_QOPT_BITMASK + 1];
@@ -733,11 +630,22 @@ struct tc_mqprio_qopt {
 #define TC_MQPRIO_F_MAX_RATE		0x8
 
 enum {
+	TCA_MQPRIO_TC_ENTRY_UNSPEC,
+	TCA_MQPRIO_TC_ENTRY_INDEX,		/* u32 */
+	TCA_MQPRIO_TC_ENTRY_FP,			/* u32 */
+
+	/* add new constants above here */
+	__TCA_MQPRIO_TC_ENTRY_CNT,
+	TCA_MQPRIO_TC_ENTRY_MAX = (__TCA_MQPRIO_TC_ENTRY_CNT - 1)
+};
+
+enum {
 	TCA_MQPRIO_UNSPEC,
 	TCA_MQPRIO_MODE,
 	TCA_MQPRIO_SHAPER,
 	TCA_MQPRIO_MIN_RATE64,
 	TCA_MQPRIO_MAX_RATE64,
+	TCA_MQPRIO_TC_ENTRY,
 	__TCA_MQPRIO_MAX,
 };
 
@@ -924,15 +832,22 @@ enum {
 
 	TCA_FQ_HORIZON_DROP,	/* drop packets beyond horizon, or cap their EDT */
 
+	TCA_FQ_PRIOMAP,		/* prio2band */
+
+	TCA_FQ_WEIGHTS,		/* Weights for each band */
+
 	__TCA_FQ_MAX
 };
 
 #define TCA_FQ_MAX	(__TCA_FQ_MAX - 1)
 
+#define FQ_BANDS 3
+#define FQ_MIN_WEIGHT 16384
+
 struct tc_fq_qd_stats {
 	__u64	gc_flows;
-	__u64	highprio_packets;
-	__u64	tcp_retrans;
+	__u64	highprio_packets;	/* obsolete */
+	__u64	tcp_retrans;		/* obsolete */
 	__u64	throttled;
 	__u64	flows_plimit;
 	__u64	pkts_too_long;
@@ -945,6 +860,10 @@ struct tc_fq_qd_stats {
 	__u64	ce_mark;		/* packets above ce_threshold */
 	__u64	horizon_drops;
 	__u64	horizon_caps;
+	__u64	fastpath_packets;
+	__u64	band_drops[FQ_BANDS];
+	__u32	band_pkt_count[FQ_BANDS];
+	__u32	pad;
 };
 
 /* Heavy-Hitter Filter */
@@ -1236,6 +1155,7 @@ enum {
 	TCA_TAPRIO_TC_ENTRY_UNSPEC,
 	TCA_TAPRIO_TC_ENTRY_INDEX,		/* u32 */
 	TCA_TAPRIO_TC_ENTRY_MAX_SDU,		/* u32 */
+	TCA_TAPRIO_TC_ENTRY_FP,			/* u32 */
 
 	/* add new constants above here */
 	__TCA_TAPRIO_TC_ENTRY_CNT,
@@ -1243,6 +1163,16 @@ enum {
 };
 
 enum {
+	TCA_TAPRIO_OFFLOAD_STATS_PAD = 1,	/* u64 */
+	TCA_TAPRIO_OFFLOAD_STATS_WINDOW_DROPS,	/* u64 */
+	TCA_TAPRIO_OFFLOAD_STATS_TX_OVERRUNS,	/* u64 */
+
+	/* add new constants above here */
+	__TCA_TAPRIO_OFFLOAD_STATS_CNT,
+	TCA_TAPRIO_OFFLOAD_STATS_MAX = (__TCA_TAPRIO_OFFLOAD_STATS_CNT - 1)
+};
+
+enum {
 	TCA_TAPRIO_ATTR_UNSPEC,
 	TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */
 	TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */
diff --git a/src/basic/linux/rtnetlink.h b/src/basic/linux/rtnetlink.h
index eb2747d..3b687d2 100644
--- a/src/basic/linux/rtnetlink.h
+++ b/src/basic/linux/rtnetlink.h
@@ -502,13 +502,17 @@ enum {
 
 #define RTAX_MAX (__RTAX_MAX - 1)
 
-#define RTAX_FEATURE_ECN	(1 << 0)
-#define RTAX_FEATURE_SACK	(1 << 1)
-#define RTAX_FEATURE_TIMESTAMP	(1 << 2)
-#define RTAX_FEATURE_ALLFRAG	(1 << 3)
-
-#define RTAX_FEATURE_MASK	(RTAX_FEATURE_ECN | RTAX_FEATURE_SACK | \
-				 RTAX_FEATURE_TIMESTAMP | RTAX_FEATURE_ALLFRAG)
+#define RTAX_FEATURE_ECN		(1 << 0)
+#define RTAX_FEATURE_SACK		(1 << 1) /* unused */
+#define RTAX_FEATURE_TIMESTAMP		(1 << 2) /* unused */
+#define RTAX_FEATURE_ALLFRAG		(1 << 3) /* unused */
+#define RTAX_FEATURE_TCP_USEC_TS	(1 << 4)
+
+#define RTAX_FEATURE_MASK	(RTAX_FEATURE_ECN |		\
+				 RTAX_FEATURE_SACK |		\
+				 RTAX_FEATURE_TIMESTAMP |	\
+				 RTAX_FEATURE_ALLFRAG |		\
+				 RTAX_FEATURE_TCP_USEC_TS)
 
 struct rta_session {
 	__u8	proto;
@@ -635,6 +639,7 @@ enum {
 	TCA_INGRESS_BLOCK,
 	TCA_EGRESS_BLOCK,
 	TCA_DUMP_FLAGS,
+	TCA_EXT_WARN_MSG,
 	__TCA_MAX
 };
 
@@ -788,6 +793,7 @@ enum {
 	TCA_ROOT_FLAGS,
 	TCA_ROOT_COUNT,
 	TCA_ROOT_TIME_DELTA, /* in msecs */
+	TCA_ROOT_EXT_WARN_MSG,
 	__TCA_ROOT_MAX,
 #define	TCA_ROOT_MAX (__TCA_ROOT_MAX - 1)
 };
diff --git a/src/basic/linux/stddef.h b/src/basic/linux/stddef.h
index 1a73963..b888a83 100644
--- a/src/basic/linux/stddef.h
+++ b/src/basic/linux/stddef.h
@@ -26,8 +26,13 @@
 	union { \
 		struct { MEMBERS } ATTRS; \
 		struct TAG { MEMBERS } ATTRS NAME; \
-	}
+	} ATTRS
 
+#ifdef __cplusplus
+/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */
+#define __DECLARE_FLEX_ARRAY(T, member)	\
+	T member[0]
+#else
 /**
  * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union
  *
@@ -44,3 +49,9 @@
 		TYPE NAME[]; \
 	}
 #endif
+
+#ifndef __counted_by
+#define __counted_by(m)
+#endif
+
+#endif /* _UAPI_LINUX_STDDEF_H */
author	Daniel Baumann <daniel.baumann@progress-linux.org>	2024-06-12 03:50:45 +0000
committer	Daniel Baumann <daniel.baumann@progress-linux.org>	2024-06-12 03:50:45 +0000
commit	efeb864cb547a2cbf96dc0053a8bdb4d9190b364 (patch)
tree	c0b83368f18be983fcc763200c4c24d633244588 /src/basic/linux
parent	Releasing progress-linux version 255.5-1~progress7.99u1. (diff)
download	systemd-efeb864cb547a2cbf96dc0053a8bdb4d9190b364.tar.xz systemd-efeb864cb547a2cbf96dc0053a8bdb4d9190b364.zip