Adding upstream version 255.4.upstream/255.4

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 534 insertions, 0 deletions

diff --git a/src/rpm/macros.systemd.in b/src/rpm/macros.systemd.in
new file mode 100644
index 0000000..241e4b9
--- /dev/null
+++ b/src/rpm/macros.systemd.in
@@ -0,0 +1,199 @@
+#  -*- Mode: rpm-spec; indent-tabs-mode: nil -*- */
+#  SPDX-License-Identifier: LGPL-2.1-or-later
+#
+#  This file is part of systemd.
+
+# RPM macros for packages installing systemd unit files
+
+%_systemd_util_dir {{LIBEXECDIR}}
+%_unitdir {{SYSTEM_DATA_UNIT_DIR}}
+%_userunitdir {{USER_DATA_UNIT_DIR}}
+%_presetdir {{SYSTEM_PRESET_DIR}}
+%_userpresetdir {{USER_PRESET_DIR}}
+%_udevhwdbdir {{UDEV_HWDB_DIR}}
+%_udevrulesdir {{UDEV_RULES_DIR}}
+%_journalcatalogdir {{SYSTEMD_CATALOG_DIR}}
+%_binfmtdir {{BINFMT_DIR}}
+%_sysctldir {{SYSCTL_DIR}}
+%_sysusersdir {{SYSUSERS_DIR}}
+%_tmpfilesdir {{TMPFILES_DIR}}
+%_user_tmpfilesdir {{USER_TMPFILES_DIR}}
+%_environmentdir {{ENVIRONMENT_DIR}}
+%_modulesloaddir {{MODULESLOAD_DIR}}
+%_modprobedir {{MODPROBE_DIR}}
+%_systemdgeneratordir {{SYSTEM_GENERATOR_DIR}}
+%_systemdusergeneratordir {{USER_GENERATOR_DIR}}
+%_systemd_system_env_generator_dir {{SYSTEM_ENV_GENERATOR_DIR}}
+%_systemd_user_env_generator_dir {{USER_ENV_GENERATOR_DIR}}
+
+# Because we had one release with a typo...
+# This is temporary (Remove after systemd 240 is released)
+%_environmnentdir %{warn:Use %%_environmentdir instead}%_environmentdir
+
+%systemd_requires \
+Requires(post): systemd \
+Requires(preun): systemd \
+Requires(postun): systemd \
+%{nil}
+
+%systemd_ordering \
+OrderWithRequires(post): systemd \
+OrderWithRequires(preun): systemd \
+OrderWithRequires(postun): systemd \
+%{nil}
+
+%__systemd_someargs_0(:) %{error:The %%%1 macro requires some arguments}
+%__systemd_twoargs_2() %{nil}
+
+%systemd_post() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_post}} \
+if [ $1 -eq 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Initial installation \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} install-system-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_user_post() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_post}} \
+if [ $1 -eq 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Initial installation \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} install-user-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_preun() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_preun}} \
+if [ $1 -eq 0 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package removal, not upgrade \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} remove-system-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_user_preun() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_preun}} \
+if [ $1 -eq 0 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package removal, not upgrade \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} remove-user-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_postun() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun}} \
+%{nil}
+
+%systemd_user_postun() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun}} \
+%{nil}
+
+%systemd_postun_with_restart() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_restart}} \
+if [ $1 -ge 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package upgrade, not uninstall \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} mark-restart-system-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_user_postun_with_restart() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun_with_restart}} \
+if [ $1 -ge 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package upgrade, not uninstall \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} mark-restart-user-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_postun_with_reload() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_reload}} \
+if [ $1 -ge 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package upgrade, not uninstall \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} mark-reload-system-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_user_postun_with_reload() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun_with_reload}} \
+if [ $1 -ge 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package upgrade, not uninstall \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} mark-reload-user-units %{?*} || : \
+fi \
+%{nil}
+
+%systemd_user_daemon_reexec() \
+if [ $1 -ge 1 ] && [ -x "{{SYSTEMD_UPDATE_HELPER_PATH}}" ]; then \
+    # Package upgrade, not uninstall \
+    {{SYSTEMD_UPDATE_HELPER_PATH}} user-reexec || : \
+fi \
+%{nil}
+
+%udev_hwdb_update() %{nil}
+
+%udev_rules_update() %{nil}
+
+%journal_catalog_update() %{nil}
+
+# Deprecated. Use %tmpfiles_create_package instead
+%tmpfiles_create() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# tmpfiles_create}} \
+command -v systemd-tmpfiles >/dev/null && systemd-tmpfiles --create %{?*} || : \
+%{nil}
+
+# Deprecated. Use %sysusers_create_package instead
+%sysusers_create() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysusers_create}} \
+command -v systemd-sysusers >/dev/null && systemd-sysusers %{?*} || : \
+%{nil}
+
+%sysusers_create_inline() \
+command -v systemd-sysusers >/dev/null && systemd-sysusers - <<SYSTEMD_INLINE_EOF || : \
+%{?*} \
+SYSTEMD_INLINE_EOF\
+%{nil}
+
+# This should be used by package installation scripts which require users or
+# groups to be present before the files installed by the package are present on
+# disk (for example because some files are owned by those users or groups).
+#
+# Example:
+#   Source1: %{name}-sysusers.conf
+#   ...
+#   %install
+#   install -D %SOURCE1 %{buildroot}%{_sysusersdir}/%{name}.conf
+#   %pre
+#   %sysusers_create_package %{name} %SOURCE1
+#   %files
+#   %{_sysusersdir}/%{name}.conf
+%sysusers_create_package() \
+%{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%sysusers_create_package macro requires two arguments}}} \
+systemd-sysusers --replace=%_sysusersdir/%1.conf - <<SYSTEMD_INLINE_EOF || : \
+%(cat %2) \
+SYSTEMD_INLINE_EOF\
+%{nil}
+
+# This may be used by package installation scripts to create files according to
+# their tmpfiles configuration from a package installation script, even before
+# the files of that package are installed on disk.
+#
+# Example:
+#   Source1: %{name}-tmpfiles.conf
+#   ...
+#   %install
+#   install -D %SOURCE1 %{buildroot}%{_tmpfilesdir}/%{name}.conf
+#   %pre
+#   %tmpfiles_create_package %{name} %SOURCE1
+#   %files
+#   %{_tmpfilesdir}/%{name}.conf
+%tmpfiles_create_package() \
+%{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%tmpfiles_create_package macro requires two arguments}}} \
+systemd-tmpfiles --replace=%_tmpfilesdir/%1.conf --create - <<SYSTEMD_INLINE_EOF || : \
+%(cat %2) \
+SYSTEMD_INLINE_EOF\
+%{nil}
+
+%sysctl_apply() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysctl_apply}} \
+[ -x {{LIBEXECDIR}}/systemd-sysctl ] && {{LIBEXECDIR}}/systemd-sysctl %{?*} || : \
+%{nil}
+
+%binfmt_apply() \
+%{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# binfmt_apply}} \
+[ -x {{LIBEXECDIR}}/systemd-binfmt ] && {{LIBEXECDIR}}/systemd-binfmt %{?*} || : \
+%{nil}
diff --git a/src/rpm/meson.build b/src/rpm/meson.build
new file mode 100644
index 0000000..af39ff1
--- /dev/null
+++ b/src/rpm/meson.build
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: LGPL-2.1-or-later
+
+in_files = [
+        ['macros.systemd',        rpmmacrosdir != 'no', rpmmacrosdir],
+
+        # we conditionalize on rpmmacrosdir, but install into libexecdir
+        ['systemd-update-helper', rpmmacrosdir != 'no', libexecdir],
+
+        ['triggers.systemd',      false],
+        ['triggers.systemd.sh',   false]]
+
+# The last two don't get installed anywhere, one of them needs to included in
+# the rpm spec file definition instead.
+
+foreach tuple : in_files
+        file = tuple[0]
+        custom_target(
+                file,
+                input : file + '.in',
+                output : file,
+                command : [jinja2_cmdline, '@INPUT@', '@OUTPUT@'],
+                install : tuple[1],
+                install_dir : tuple.length() > 2 ? tuple[2] : '',
+                build_by_default : true)
+endforeach
diff --git a/src/rpm/systemd-update-helper.in b/src/rpm/systemd-update-helper.in
new file mode 100755
index 0000000..c81e16c
--- /dev/null
+++ b/src/rpm/systemd-update-helper.in
@@ -0,0 +1,141 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eu
+set -o pipefail
+
+command="${1:?}"
+shift
+
+command -v systemctl >/dev/null || exit 0
+
+case "$command" in
+    install-system-units)
+        systemctl --no-reload preset "$@"
+        ;;
+
+    install-user-units)
+        systemctl --no-reload preset --global "$@"
+        ;;
+
+    remove-system-units)
+        if [ -d /run/systemd/system ]; then
+            systemctl --no-reload disable --now --no-warn "$@"
+        else
+            systemctl --no-reload disable --no-warn "$@"
+        fi
+        ;;
+
+    remove-user-units)
+        systemctl --global disable --no-warn "$@"
+
+        [ -d /run/systemd/system ] || exit 0
+
+        users=$(systemctl list-units 'user@*' --legend=no | sed -n -r 's/.*user@([0-9]+).service.*/\1/p')
+        for user in $users; do
+            SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                    systemctl --user -M "$user@" disable --now --no-warn "$@" &
+        done
+        wait
+        ;;
+
+    mark-restart-system-units)
+        [ -d /run/systemd/system ] || exit 0
+
+        for unit in "$@"; do
+            systemctl set-property "$unit" Markers=+needs-restart &
+        done
+        wait
+        ;;
+
+    mark-reload-system-units)
+        [ -d /run/systemd/system ] || exit 0
+
+        for unit in "$@"; do
+            systemctl set-property "$unit" Markers=+needs-reload &
+        done
+        wait
+        ;;
+
+    mark-restart-user-units)
+        [ -d /run/systemd/system ] || exit 0
+
+        users=$(systemctl list-units 'user@*' --legend=no | sed -n -r 's/.*user@([0-9]+).service.*/\1/p')
+        for user in $users; do
+            for unit in "$@"; do
+                SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                        systemctl --user -M "$user@" set-property "$unit" Markers=+needs-restart &
+            done
+        done
+        wait
+        ;;
+
+    mark-reload-user-units)
+        [ -d /run/systemd/system ] || exit 0
+
+        users=$(systemctl list-units 'user@*' --legend=no | sed -n -r 's/.*user@([0-9]+).service.*/\1/p')
+        for user in $users; do
+            for unit in "$@"; do
+                SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                        systemctl --user -M "$user@" set-property "$unit" Markers=+needs-reload &
+            done
+        done
+        wait
+        ;;
+
+    system-reload-restart|system-reload|system-restart)
+        if [ -n "$*" ]; then
+            echo "Unexpected arguments for '$command': $*"
+            exit 2
+        fi
+
+        [ -d /run/systemd/system ] || exit 0
+
+        if [[ "$command" =~ reload ]]; then
+            systemctl daemon-reload
+        fi
+
+        if [[ "$command" =~ restart ]]; then
+            systemctl reload-or-restart --marked
+        fi
+        ;;
+
+    user-reload-restart|user-reload|user-restart|user-reexec)
+        if [ -n "$*" ]; then
+            echo "Unexpected arguments for '$command': $*"
+            exit 2
+        fi
+
+        [ -d /run/systemd/system ] || exit 0
+
+        users=$(systemctl list-units 'user@*' --legend=no | sed -n -r 's/.*user@([0-9]+).service.*/\1/p')
+
+        if [[ "$command" =~ reexec ]]; then
+            for user in $users; do
+                SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                        systemctl --user -M "$user@" daemon-reexec &
+            done
+            wait
+        fi
+
+        if [[ "$command" =~ reload ]]; then
+            for user in $users; do
+                SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                        systemctl --user -M "$user@" daemon-reload &
+            done
+            wait
+        fi
+
+        if [[ "$command" =~ restart ]]; then
+            for user in $users; do
+                SYSTEMD_BUS_TIMEOUT={{UPDATE_HELPER_USER_TIMEOUT_SEC}}s \
+                        systemctl --user -M "$user@" reload-or-restart --marked &
+            done
+            wait
+        fi
+        ;;
+
+    *)
+        echo "Unknown verb '$command'"
+        exit 3
+        ;;
+esac
diff --git a/src/rpm/triggers.systemd.in b/src/rpm/triggers.systemd.in
new file mode 100644
index 0000000..d480ab8
--- /dev/null
+++ b/src/rpm/triggers.systemd.in
@@ -0,0 +1,82 @@
+#  -*- Mode: rpm-spec; indent-tabs-mode: nil -*- */
+#  SPDX-License-Identifier: LGPL-2.1-or-later
+#
+#  This file is part of systemd.
+#  Copyright © 2018 Neal Gompa
+
+# The contents of this are an example to be copied into systemd.spec.
+#
+# Minimum rpm version supported: 4.14.0
+
+%transfiletriggerin -P 900900 -p <lua> -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+-- This script will run after any package is initially installed or
+-- upgraded. We care about the case where a package is initially
+-- installed, because other cases are covered by the *un scriptlets,
+-- so sometimes we will reload needlessly.
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "system-reload-restart"))
+
+%transfiletriggerin -P 900899 -p <lua> -- {{USER_DATA_UNIT_DIR}} /etc/systemd/user
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "user-reload-restart"))
+
+%transfiletriggerpostun -P 1000100 -p <lua> -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+-- On removal, we need to run daemon-reload after any units have been
+-- removed.
+-- On upgrade, we need to run daemon-reload after any new unit files
+-- have been installed, but before %postun scripts in packages get
+-- executed.
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "system-reload"))
+
+%transfiletriggerpostun -P 1000100 -p <lua> -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+-- Execute daemon-reload in user managers.
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "user-reload"))
+
+%transfiletriggerpostun -P 10000 -p <lua> -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+-- We restart remaining system services that should be restarted here.
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "system-restart"))
+
+%transfiletriggerpostun -P 9999 -p <lua> -- {{USER_DATA_UNIT_DIR}} /etc/systemd/user
+-- We restart remaining user services that should be restarted here.
+assert(rpm.execute("{{SYSTEMD_UPDATE_HELPER_PATH}}", "user-restart"))
+
+%transfiletriggerin -P 1000700 -p <lua> -- {{SYSUSERS_DIR}}
+-- This script will process files installed in {{SYSUSERS_DIR}} to create
+-- specified users automatically. The priority is set such that it
+-- will run before the tmpfiles file trigger.
+assert(rpm.execute("systemd-sysusers"))
+
+%transfiletriggerin -P 1000700 udev -p <lua> -- {{UDEV_HWDB_DIR}}
+-- This script will automatically invoke hwdb update if files have been
+-- installed or updated in {{UDEV_HWDB_DIR}}.
+assert(rpm.execute("systemd-hwdb", "update"))
+
+%transfiletriggerin -P 1000700 -p <lua> -- {{SYSTEMD_CATALOG_DIR}}
+-- This script will automatically invoke journal catalog update if files
+-- have been installed or updated in {{SYSTEMD_CATALOG_DIR}}.
+assert(rpm.execute("journalctl", "--update-catalog"))
+
+%transfiletriggerin -P 1000700 -p <lua> -- {{BINFMT_DIR}}
+-- This script will automatically apply binfmt rules if files have been
+-- installed or updated in {{BINFMT_DIR}}.
+if posix.access("/run/systemd/system") then
+    assert(rpm.execute("{{LIBEXECDIR}}/systemd-binfmt"))
+end
+
+%transfiletriggerin -P 1000600 -p <lua> -- {{TMPFILES_DIR}}
+-- This script will process files installed in {{TMPFILES_DIR}} to create
+-- tmpfiles automatically. The priority is set such that it will run
+-- after the sysusers file trigger, but before any other triggers.
+assert(rpm.execute("systemd-tmpfiles", "--create"))
+
+%transfiletriggerin -P 1000600 udev -p <lua> -- {{UDEV_RULES_DIR}}
+-- This script will automatically update udev with new rules if files
+-- have been installed or updated in {{UDEV_RULES_DIR}}.
+if posix.access("/run/udev/control") then
+    assert(rpm.execute("udevadm", "control", "--reload"))
+end
+
+%transfiletriggerin -P 1000500 -p <lua> -- {{SYSCTL_DIR}}
+-- This script will automatically apply sysctl rules if files have been
+-- installed or updated in {{SYSCTL_DIR}}.
+if posix.access("/run/systemd/system") then
+    assert(rpm.execute("{{LIBEXECDIR}}/systemd-sysctl"))
+end
diff --git a/src/rpm/triggers.systemd.sh.in b/src/rpm/triggers.systemd.sh.in
new file mode 100644
index 0000000..1b94f7d
--- /dev/null
+++ b/src/rpm/triggers.systemd.sh.in
@@ -0,0 +1,87 @@
+#  -*- Mode: rpm-spec; indent-tabs-mode: nil -*- */
+#  SPDX-License-Identifier: LGPL-2.1-or-later
+#
+#  This file is part of systemd.
+#
+#  Copyright 2018 Neal Gompa
+
+# The contents of this are an example to be copied into systemd.spec.
+#
+# Minimum rpm version supported: 4.14.0
+
+%transfiletriggerin -P 900900 -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+# This script will run after any package is initially installed or
+# upgraded. We care about the case where a package is initially
+# installed, because other cases are covered by the *un scriptlets,
+# so sometimes we will reload needlessly.
+{{SYSTEMD_UPDATE_HELPER_PATH}} system-reload-restart || :
+
+%transfiletriggerin -P 900899 -- {{USER_DATA_UNIT_DIR}} /etc/systemd/user
+{{SYSTEMD_UPDATE_HELPER_PATH}} user-reload-restart || :
+
+%transfiletriggerpostun -P 1000100 -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+# On removal, we need to run daemon-reload after any units have been
+# removed.
+# On upgrade, we need to run daemon-reload after any new unit files
+# have been installed, but before %postun scripts in packages get
+# executed.
+{{SYSTEMD_UPDATE_HELPER_PATH}} system-reload || :
+
+%transfiletriggerpostun -P 1000099 -- {{USER_DATA_UNIT_DIR}} /etc/systemd/user
+# Execute daemon-reload in user managers.
+{{SYSTEMD_UPDATE_HELPER_PATH}} user-reload || :
+
+%transfiletriggerpostun -P 10000 -- {{SYSTEM_DATA_UNIT_DIR}} /etc/systemd/system
+# We restart remaining system services that should be restarted here.
+{{SYSTEMD_UPDATE_HELPER_PATH}} system-restart || :
+
+%transfiletriggerpostun -P  9999 -- {{USER_DATA_UNIT_DIR}} /etc/systemd/user
+# We restart remaining user services that should be restarted here.
+{{SYSTEMD_UPDATE_HELPER_PATH}} user-restart || :
+
+%transfiletriggerin -P 1000700 -- {{SYSUSERS_DIR}}
+# This script will process files installed in {{SYSUSERS_DIR}} to create
+# specified users automatically. The priority is set such that it
+# will run before the tmpfiles file trigger.
+systemd-sysusers || :
+
+%transfiletriggerin -P 1000700 udev -- {{UDEV_HWDB_DIR}}
+# This script will automatically invoke hwdb update if files have been
+# installed or updated in {{UDEV_HWDB_DIR}}.
+systemd-hwdb update || :
+
+%transfiletriggerin -P 1000700 -- {{SYSTEMD_CATALOG_DIR}}
+# This script will automatically invoke journal catalog update if files
+# have been installed or updated in {{SYSTEMD_CATALOG_DIR}}.
+journalctl --update-catalog || :
+
+%transfiletriggerin -P 1000700 -- {{BINFMT_DIR}}
+# This script will automatically apply binfmt rules if files have been
+# installed or updated in {{BINFMT_DIR}}.
+if test -d "/run/systemd/system"; then
+  # systemd-binfmt might fail if binfmt_misc kernel module is not loaded
+  # during install
+  {{LIBEXECDIR}}/systemd-binfmt || :
+fi
+
+%transfiletriggerin -P 1000600 -- {{TMPFILES_DIR}}
+# This script will process files installed in {{TMPFILES_DIR}} to create
+# tmpfiles automatically. The priority is set such that it will run
+# after the sysusers file trigger, but before any other triggers.
+if test -d "/run/systemd/system"; then
+  systemd-tmpfiles --create || :
+fi
+
+%transfiletriggerin -P 1000600 udev -- {{UDEV_RULES_DIR}}
+# This script will automatically update udev with new rules if files
+# have been installed or updated in {{UDEV_RULES_DIR}}.
+if test -e /run/udev/control; then
+  udevadm control --reload || :
+fi
+
+%transfiletriggerin -P 1000500 -- {{SYSCTL_DIR}}
+# This script will automatically apply sysctl rules if files have been
+# installed or updated in {{SYSCTL_DIR}}.
+if test -d "/run/systemd/system"; then
+  {{LIBEXECDIR}}/systemd-sysctl || :
+fi