Adding upstream version 4.99.4.upstream/4.99.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 665 insertions, 0 deletions

diff --git a/print-ether.c b/print-ether.c
new file mode 100644
index 0000000..cd623f9
--- /dev/null
+++ b/print-ether.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/* \summary: Ethernet printer */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "netdissect-stdinc.h"
+
+#define ND_LONGJMP_FROM_TCHECK
+#include "netdissect.h"
+#include "extract.h"
+#include "addrtoname.h"
+#include "ethertype.h"
+
+/*
+ * Structure of an Ethernet header.
+ */
+struct	ether_header {
+	nd_mac_addr	ether_dhost;
+	nd_mac_addr	ether_shost;
+	nd_uint16_t	ether_length_type;
+};
+
+/*
+ * Length of an Ethernet header; note that some compilers may pad
+ * "struct ether_header" to a multiple of 4 bytes, for example, so
+ * "sizeof (struct ether_header)" may not give the right answer.
+ */
+#define ETHER_HDRLEN		14
+
+const struct tok ethertype_values[] = {
+    { ETHERTYPE_IP,		"IPv4" },
+    { ETHERTYPE_MPLS,		"MPLS unicast" },
+    { ETHERTYPE_MPLS_MULTI,	"MPLS multicast" },
+    { ETHERTYPE_IPV6,		"IPv6" },
+    { ETHERTYPE_8021Q,		"802.1Q" },
+    { ETHERTYPE_8021Q9100,	"802.1Q-9100" },
+    { ETHERTYPE_8021QinQ,	"802.1Q-QinQ" },
+    { ETHERTYPE_8021Q9200,	"802.1Q-9200" },
+    { ETHERTYPE_MACSEC,		"802.1AE MACsec" },
+    { ETHERTYPE_VMAN,		"VMAN" },
+    { ETHERTYPE_PUP,            "PUP" },
+    { ETHERTYPE_ARP,            "ARP"},
+    { ETHERTYPE_REVARP,         "Reverse ARP"},
+    { ETHERTYPE_NS,             "NS" },
+    { ETHERTYPE_SPRITE,         "Sprite" },
+    { ETHERTYPE_TRAIL,          "Trail" },
+    { ETHERTYPE_MOPDL,          "MOP DL" },
+    { ETHERTYPE_MOPRC,          "MOP RC" },
+    { ETHERTYPE_DN,             "DN" },
+    { ETHERTYPE_LAT,            "LAT" },
+    { ETHERTYPE_SCA,            "SCA" },
+    { ETHERTYPE_TEB,            "TEB" },
+    { ETHERTYPE_LANBRIDGE,      "Lanbridge" },
+    { ETHERTYPE_DECDNS,         "DEC DNS" },
+    { ETHERTYPE_DECDTS,         "DEC DTS" },
+    { ETHERTYPE_VEXP,           "VEXP" },
+    { ETHERTYPE_VPROD,          "VPROD" },
+    { ETHERTYPE_ATALK,          "Appletalk" },
+    { ETHERTYPE_AARP,           "Appletalk ARP" },
+    { ETHERTYPE_IPX,            "IPX" },
+    { ETHERTYPE_PPP,            "PPP" },
+    { ETHERTYPE_MPCP,           "MPCP" },
+    { ETHERTYPE_SLOW,           "Slow Protocols" },
+    { ETHERTYPE_PPPOED,         "PPPoE D" },
+    { ETHERTYPE_PPPOES,         "PPPoE S" },
+    { ETHERTYPE_EAPOL,          "EAPOL" },
+    { ETHERTYPE_REALTEK,        "Realtek protocols" },
+    { ETHERTYPE_MS_NLB_HB,      "MS NLB heartbeat" },
+    { ETHERTYPE_JUMBO,          "Jumbo" },
+    { ETHERTYPE_NSH,            "NSH" },
+    { ETHERTYPE_LOOPBACK,       "Loopback" },
+    { ETHERTYPE_ISO,            "OSI" },
+    { ETHERTYPE_GRE_ISO,        "GRE-OSI" },
+    { ETHERTYPE_CFM_OLD,        "CFM (old)" },
+    { ETHERTYPE_CFM,            "CFM" },
+    { ETHERTYPE_IEEE1905_1,     "IEEE1905.1" },
+    { ETHERTYPE_LLDP,           "LLDP" },
+    { ETHERTYPE_TIPC,           "TIPC"},
+    { ETHERTYPE_GEONET_OLD,     "GeoNet (old)"},
+    { ETHERTYPE_GEONET,         "GeoNet"},
+    { ETHERTYPE_CALM_FAST,      "CALM FAST"},
+    { ETHERTYPE_AOE,            "AoE" },
+    { ETHERTYPE_PTP,            "PTP" },
+    { ETHERTYPE_ARISTA,         "Arista Vendor Specific Protocol" },
+    { 0, NULL}
+};
+
+static void
+ether_addresses_print(netdissect_options *ndo, const u_char *src,
+		      const u_char *dst)
+{
+	ND_PRINT("%s > %s, ",
+		 GET_ETHERADDR_STRING(src), GET_ETHERADDR_STRING(dst));
+}
+
+static void
+ether_type_print(netdissect_options *ndo, uint16_t type)
+{
+	if (!ndo->ndo_qflag)
+		ND_PRINT("ethertype %s (0x%04x)",
+			 tok2str(ethertype_values, "Unknown", type), type);
+	else
+		ND_PRINT("%s",
+			 tok2str(ethertype_values, "Unknown Ethertype (0x%04x)", type));
+}
+
+/*
+ * Common code for printing Ethernet frames.
+ *
+ * It can handle Ethernet headers with extra tag information inserted
+ * after the destination and source addresses, as is inserted by some
+ * switch chips, and extra encapsulation header information before
+ * printing Ethernet header information (such as a LANE ID for ATM LANE).
+ */
+static u_int
+ether_common_print(netdissect_options *ndo, const u_char *p, u_int length,
+    u_int caplen,
+    void (*print_switch_tag)(netdissect_options *ndo, const u_char *),
+    u_int switch_tag_len,
+    void (*print_encap_header)(netdissect_options *ndo, const u_char *),
+    const u_char *encap_header_arg)
+{
+	const struct ether_header *ehp;
+	u_int orig_length;
+	u_int hdrlen;
+	u_short length_type;
+	int printed_length;
+	int llc_hdrlen;
+	struct lladdr_info src, dst;
+
+	if (length < caplen) {
+		ND_PRINT("[length %u < caplen %u]", length, caplen);
+		nd_print_invalid(ndo);
+		return length;
+	}
+	if (caplen < ETHER_HDRLEN + switch_tag_len) {
+		nd_print_trunc(ndo);
+		return caplen;
+	}
+
+	if (print_encap_header != NULL)
+		(*print_encap_header)(ndo, encap_header_arg);
+
+	orig_length = length;
+
+	/*
+	 * Get the source and destination addresses, skip past them,
+	 * and print them if we're printing the link-layer header.
+	 */
+	ehp = (const struct ether_header *)p;
+	src.addr = ehp->ether_shost;
+	src.addr_string = etheraddr_string;
+	dst.addr = ehp->ether_dhost;
+	dst.addr_string = etheraddr_string;
+
+	length -= 2*MAC_ADDR_LEN;
+	caplen -= 2*MAC_ADDR_LEN;
+	p += 2*MAC_ADDR_LEN;
+	hdrlen = 2*MAC_ADDR_LEN;
+
+	if (ndo->ndo_eflag)
+		ether_addresses_print(ndo, src.addr, dst.addr);
+
+	/*
+	 * Print the switch tag, if we have one, and skip past it.
+	 */
+	if (print_switch_tag != NULL)
+		(*print_switch_tag)(ndo, p);
+
+	length -= switch_tag_len;
+	caplen -= switch_tag_len;
+	p += switch_tag_len;
+	hdrlen += switch_tag_len;
+
+	/*
+	 * Get the length/type field, skip past it, and print it
+	 * if we're printing the link-layer header.
+	 */
+recurse:
+	length_type = GET_BE_U_2(p);
+
+	length -= 2;
+	caplen -= 2;
+	p += 2;
+	hdrlen += 2;
+
+	/*
+	 * Process 802.1AE MACsec headers.
+	 */
+	printed_length = 0;
+	if (length_type == ETHERTYPE_MACSEC) {
+		/*
+		 * MACsec, aka IEEE 802.1AE-2006
+		 * Print the header, and try to print the payload if it's not encrypted
+		 */
+		if (ndo->ndo_eflag) {
+			ether_type_print(ndo, length_type);
+			ND_PRINT(", length %u: ", orig_length);
+			printed_length = 1;
+		}
+
+		int ret = macsec_print(ndo, &p, &length, &caplen, &hdrlen,
+				       &src, &dst);
+
+		if (ret == 0) {
+			/* Payload is encrypted; print it as raw data. */
+			if (!ndo->ndo_suppress_default_print)
+				ND_DEFAULTPRINT(p, caplen);
+			return hdrlen;
+		} else if (ret > 0) {
+			/* Problem printing the header; just quit. */
+			return ret;
+		} else {
+			/*
+			 * Keep processing type/length fields.
+			 */
+			length_type = GET_BE_U_2(p);
+
+			ND_LCHECK_U(caplen, 2);
+			length -= 2;
+			caplen -= 2;
+			p += 2;
+			hdrlen += 2;
+		}
+	}
+
+	/*
+	 * Process VLAN tag types.
+	 */
+	while (length_type == ETHERTYPE_8021Q  ||
+		length_type == ETHERTYPE_8021Q9100 ||
+		length_type == ETHERTYPE_8021Q9200 ||
+		length_type == ETHERTYPE_8021QinQ) {
+		/*
+		 * It has a VLAN tag.
+		 * Print VLAN information, and then go back and process
+		 * the enclosed type field.
+		 */
+		if (caplen < 4) {
+			ndo->ndo_protocol = "vlan";
+			nd_print_trunc(ndo);
+			return hdrlen + caplen;
+		}
+		if (length < 4) {
+			ndo->ndo_protocol = "vlan";
+			nd_print_trunc(ndo);
+			return hdrlen + length;
+		}
+		if (ndo->ndo_eflag) {
+			uint16_t tag = GET_BE_U_2(p);
+
+			ether_type_print(ndo, length_type);
+			if (!printed_length) {
+				ND_PRINT(", length %u: ", orig_length);
+				printed_length = 1;
+			} else
+				ND_PRINT(", ");
+			ND_PRINT("%s, ", ieee8021q_tci_string(tag));
+		}
+
+		length_type = GET_BE_U_2(p + 2);
+		p += 4;
+		length -= 4;
+		caplen -= 4;
+		hdrlen += 4;
+	}
+
+	/*
+	 * We now have the final length/type field.
+	 */
+	if (length_type <= MAX_ETHERNET_LENGTH_VAL) {
+		/*
+		 * It's a length field, containing the length of the
+		 * remaining payload; use it as such, as long as
+		 * it's not too large (bigger than the actual payload).
+		 */
+		if (length_type < length) {
+			length = length_type;
+			if (caplen > length)
+				caplen = length;
+		}
+
+		/*
+		 * Cut off the snapshot length to the end of the
+		 * payload.
+		 */
+		if (!nd_push_snaplen(ndo, p, length)) {
+			(*ndo->ndo_error)(ndo, S_ERR_ND_MEM_ALLOC,
+				"%s: can't push snaplen on buffer stack", __func__);
+		}
+
+		if (ndo->ndo_eflag) {
+			ND_PRINT("802.3");
+			if (!printed_length)
+				ND_PRINT(", length %u: ", length);
+		}
+
+		/*
+		 * An LLC header follows the length.  Print that and
+		 * higher layers.
+		 */
+		llc_hdrlen = llc_print(ndo, p, length, caplen, &src, &dst);
+		if (llc_hdrlen < 0) {
+			/* packet type not known, print raw packet */
+			if (!ndo->ndo_suppress_default_print)
+				ND_DEFAULTPRINT(p, caplen);
+			llc_hdrlen = -llc_hdrlen;
+		}
+		hdrlen += llc_hdrlen;
+		nd_pop_packet_info(ndo);
+	} else if (length_type == ETHERTYPE_JUMBO) {
+		/*
+		 * It's a type field, with the type for Alteon jumbo frames.
+		 * See
+		 *
+		 *	https://tools.ietf.org/html/draft-ietf-isis-ext-eth-01
+		 *
+		 * which indicates that, following the type field,
+		 * there's an LLC header and payload.
+		 */
+		/* Try to print the LLC-layer header & higher layers */
+		llc_hdrlen = llc_print(ndo, p, length, caplen, &src, &dst);
+		if (llc_hdrlen < 0) {
+			/* packet type not known, print raw packet */
+			if (!ndo->ndo_suppress_default_print)
+				ND_DEFAULTPRINT(p, caplen);
+			llc_hdrlen = -llc_hdrlen;
+		}
+		hdrlen += llc_hdrlen;
+	} else if (length_type == ETHERTYPE_ARISTA) {
+		if (caplen < 2) {
+			ND_PRINT("[|arista]");
+			return hdrlen + caplen;
+		}
+		if (length < 2) {
+			ND_PRINT("[|arista]");
+			return hdrlen + length;
+		}
+		ether_type_print(ndo, length_type);
+		ND_PRINT(", length %u: ", orig_length);
+		int bytesConsumed = arista_ethertype_print(ndo, p, length);
+		if (bytesConsumed > 0) {
+			p += bytesConsumed;
+			length -= bytesConsumed;
+			caplen -= bytesConsumed;
+			hdrlen += bytesConsumed;
+			goto recurse;
+		} else {
+			/* subtype/version not known, print raw packet */
+			if (!ndo->ndo_eflag && length_type > MAX_ETHERNET_LENGTH_VAL) {
+				ether_addresses_print(ndo, src.addr, dst.addr);
+				ether_type_print(ndo, length_type);
+				ND_PRINT(", length %u: ", orig_length);
+			}
+			 if (!ndo->ndo_suppress_default_print)
+				 ND_DEFAULTPRINT(p, caplen);
+		}
+	} else {
+		/*
+		 * It's a type field with some other value.
+		 */
+		if (ndo->ndo_eflag) {
+			ether_type_print(ndo, length_type);
+			if (!printed_length)
+				ND_PRINT(", length %u: ", orig_length);
+			else
+				ND_PRINT(", ");
+		}
+		if (ethertype_print(ndo, length_type, p, length, caplen, &src, &dst) == 0) {
+			/* type not known, print raw packet */
+			if (!ndo->ndo_eflag) {
+				/*
+				 * We didn't print the full link-layer
+				 * header, as -e wasn't specified, so
+				 * print only the source and destination
+				 * MAC addresses and the final Ethernet
+				 * type.
+				 */
+				ether_addresses_print(ndo, src.addr, dst.addr);
+				ether_type_print(ndo, length_type);
+				ND_PRINT(", length %u: ", orig_length);
+			}
+
+			if (!ndo->ndo_suppress_default_print)
+				ND_DEFAULTPRINT(p, caplen);
+		}
+	}
+invalid:
+	return hdrlen;
+}
+
+/*
+ * Print an Ethernet frame while specyfing a non-standard Ethernet header
+ * length.
+ * This might be encapsulated within another frame; we might be passed
+ * a pointer to a function that can print header information for that
+ * frame's protocol, and an argument to pass to that function.
+ *
+ * FIXME: caplen can and should be derived from ndo->ndo_snapend and p.
+ */
+u_int
+ether_switch_tag_print(netdissect_options *ndo, const u_char *p, u_int length,
+    u_int caplen,
+    void (*print_switch_tag)(netdissect_options *, const u_char *),
+    u_int switch_tag_len)
+{
+	return ether_common_print(ndo, p, length, caplen, print_switch_tag,
+				  switch_tag_len, NULL, NULL);
+}
+
+/*
+ * Print an Ethernet frame.
+ * This might be encapsulated within another frame; we might be passed
+ * a pointer to a function that can print header information for that
+ * frame's protocol, and an argument to pass to that function.
+ *
+ * FIXME: caplen can and should be derived from ndo->ndo_snapend and p.
+ */
+u_int
+ether_print(netdissect_options *ndo,
+	    const u_char *p, u_int length, u_int caplen,
+	    void (*print_encap_header)(netdissect_options *ndo, const u_char *),
+	    const u_char *encap_header_arg)
+{
+	ndo->ndo_protocol = "ether";
+	return ether_common_print(ndo, p, length, caplen, NULL, 0,
+				  print_encap_header, encap_header_arg);
+}
+
+/*
+ * This is the top level routine of the printer.  'p' points
+ * to the ether header of the packet, 'h->len' is the length
+ * of the packet off the wire, and 'h->caplen' is the number
+ * of bytes actually captured.
+ */
+void
+ether_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h,
+	       const u_char *p)
+{
+	ndo->ndo_protocol = "ether";
+	ndo->ndo_ll_hdr_len +=
+		ether_print(ndo, p, h->len, h->caplen, NULL, NULL);
+}
+
+/*
+ * This is the top level routine of the printer.  'p' points
+ * to the ether header of the packet, 'h->len' is the length
+ * of the packet off the wire, and 'h->caplen' is the number
+ * of bytes actually captured.
+ *
+ * This is for DLT_NETANALYZER, which has a 4-byte pseudo-header
+ * before the Ethernet header.
+ */
+void
+netanalyzer_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h,
+		     const u_char *p)
+{
+	/*
+	 * Fail if we don't have enough data for the Hilscher pseudo-header.
+	 */
+	ndo->ndo_protocol = "netanalyzer";
+	ND_TCHECK_LEN(p, 4);
+
+	/* Skip the pseudo-header. */
+	ndo->ndo_ll_hdr_len += 4;
+	ndo->ndo_ll_hdr_len +=
+		ether_print(ndo, p + 4, h->len - 4, h->caplen - 4, NULL, NULL);
+}
+
+/*
+ * This is the top level routine of the printer.  'p' points
+ * to the ether header of the packet, 'h->len' is the length
+ * of the packet off the wire, and 'h->caplen' is the number
+ * of bytes actually captured.
+ *
+ * This is for DLT_NETANALYZER_TRANSPARENT, which has a 4-byte
+ * pseudo-header, a 7-byte Ethernet preamble, and a 1-byte Ethernet SOF
+ * before the Ethernet header.
+ */
+void
+netanalyzer_transparent_if_print(netdissect_options *ndo,
+				 const struct pcap_pkthdr *h,
+				 const u_char *p)
+{
+	/*
+	 * Fail if we don't have enough data for the Hilscher pseudo-header,
+	 * preamble, and SOF.
+	 */
+	ndo->ndo_protocol = "netanalyzer_transparent";
+	ND_TCHECK_LEN(p, 12);
+
+	/* Skip the pseudo-header, preamble, and SOF. */
+	ndo->ndo_ll_hdr_len += 12;
+	ndo->ndo_ll_hdr_len +=
+		ether_print(ndo, p + 12, h->len - 12, h->caplen - 12, NULL, NULL);
+}
+
+/*
+ * Prints the packet payload, given an Ethernet type code for the payload's
+ * protocol.
+ *
+ * Returns non-zero if it can do so, zero if the ethertype is unknown.
+ */
+
+int
+ethertype_print(netdissect_options *ndo,
+		u_short ether_type, const u_char *p,
+		u_int length, u_int caplen,
+		const struct lladdr_info *src, const struct lladdr_info *dst)
+{
+	switch (ether_type) {
+
+	case ETHERTYPE_IP:
+		ip_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_IPV6:
+		ip6_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_ARP:
+	case ETHERTYPE_REVARP:
+		arp_print(ndo, p, length, caplen);
+		return (1);
+
+	case ETHERTYPE_DN:
+		decnet_print(ndo, p, length, caplen);
+		return (1);
+
+	case ETHERTYPE_ATALK:
+		if (ndo->ndo_vflag)
+			ND_PRINT("et1 ");
+		atalk_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_AARP:
+		aarp_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_IPX:
+		ND_PRINT("(NOV-ETHII) ");
+		ipx_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_ISO:
+		if (length == 0 || caplen == 0) {
+			ndo->ndo_protocol = "isoclns";
+			nd_print_trunc(ndo);
+			return (1);
+		}
+		/* At least one byte is required */
+		/* FIXME: Reference for this byte? */
+		ND_TCHECK_LEN(p, 1);
+		isoclns_print(ndo, p + 1, length - 1);
+		return(1);
+
+	case ETHERTYPE_PPPOED:
+	case ETHERTYPE_PPPOES:
+	case ETHERTYPE_PPPOED2:
+	case ETHERTYPE_PPPOES2:
+		pppoe_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_EAPOL:
+		eapol_print(ndo, p);
+		return (1);
+
+	case ETHERTYPE_REALTEK:
+		rtl_print(ndo, p, length, src, dst);
+		return (1);
+
+	case ETHERTYPE_PPP:
+		if (length) {
+			ND_PRINT(": ");
+			ppp_print(ndo, p, length);
+		}
+		return (1);
+
+	case ETHERTYPE_MPCP:
+		mpcp_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_SLOW:
+		slow_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_CFM:
+	case ETHERTYPE_CFM_OLD:
+		cfm_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_LLDP:
+		lldp_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_NSH:
+		nsh_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_LOOPBACK:
+		loopback_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_MPLS:
+	case ETHERTYPE_MPLS_MULTI:
+		mpls_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_TIPC:
+		tipc_print(ndo, p, length, caplen);
+		return (1);
+
+	case ETHERTYPE_MS_NLB_HB:
+		msnlb_print(ndo, p);
+		return (1);
+
+	case ETHERTYPE_GEONET_OLD:
+	case ETHERTYPE_GEONET:
+		geonet_print(ndo, p, length, src);
+		return (1);
+
+	case ETHERTYPE_CALM_FAST:
+		calm_fast_print(ndo, p, length, src);
+		return (1);
+
+	case ETHERTYPE_AOE:
+		aoe_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_PTP:
+		ptp_print(ndo, p, length);
+		return (1);
+
+	case ETHERTYPE_LAT:
+	case ETHERTYPE_SCA:
+	case ETHERTYPE_MOPRC:
+	case ETHERTYPE_MOPDL:
+	case ETHERTYPE_IEEE1905_1:
+		/* default_print for now */
+	default:
+		return (0);
+	}
+}