Adding upstream version 1:115.7.0.upstream/1%115.7.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 269 insertions, 0 deletions

diff --git a/netwerk/base/nsIServerSocket.idl b/netwerk/base/nsIServerSocket.idl
new file mode 100644
index 0000000000..d6fd348778
--- /dev/null
+++ b/netwerk/base/nsIServerSocket.idl
@@ -0,0 +1,269 @@
+/* vim:set ts=4 sw=4 et cindent: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include "nsISupports.idl"
+
+interface nsIFile;
+interface nsIServerSocketListener;
+interface nsISocketTransport;
+
+native PRNetAddr(union PRNetAddr);
+[ptr] native PRNetAddrPtr(union PRNetAddr);
+
+typedef unsigned long nsServerSocketFlag;
+
+/**
+ * nsIServerSocket
+ *
+ * An interface to a server socket that can accept incoming connections.
+ */
+[scriptable, uuid(7a9c39cb-a13f-4eef-9bdf-a74301628742)]
+interface nsIServerSocket : nsISupports
+{
+    /**
+     * @name Server Socket Flags
+     * These flags define various socket options.
+     * @{
+     */
+    /// The server socket will only respond to connections on the
+    /// local loopback interface.  Otherwise, it will accept connections
+    /// from any interface.  To specify a particular network interface,
+    /// use initWithAddress.
+    const nsServerSocketFlag LoopbackOnly = 0x00000001;
+    /// The server socket will not be closed when Gecko is set
+    /// offline.
+    const nsServerSocketFlag KeepWhenOffline = 0x00000002;
+    /** @} */
+
+    /**
+     * init
+     *
+     * This method initializes a server socket.
+     *
+     * @param aPort
+     *        The port of the server socket.  Pass -1 to indicate no preference,
+     *        and a port will be selected automatically.
+     * @param aLoopbackOnly
+     *        If true, the server socket will only respond to connections on the
+     *        local loopback interface.  Otherwise, it will accept connections
+     *        from any interface.  To specify a particular network interface,
+     *        use initWithAddress.
+     * @param aBackLog
+     *        The maximum length the queue of pending connections may grow to.
+     *        This parameter may be silently limited by the operating system.
+     *        Pass -1 to use the default value.
+     */
+    void init(in long aPort,
+              in boolean aLoopbackOnly,
+              in long aBackLog);
+
+    /**
+     * the same as init(), but initializes an IPv6 server socket
+     */
+    void initIPv6(in long aPort,
+                  in boolean aLoopbackOnly,
+                  in long aBackLog);
+
+    /**
+     * Similar to init(), but initializes a server socket that supports
+     * both IPv4 and IPv6.
+     */
+    void initDualStack(in long aPort,
+                       in long aBackLog);
+
+    /**
+     * initSpecialConnection
+     *
+     * This method initializes a server socket and offers the ability to have
+     * that socket not get terminated if Gecko is set offline.
+     *
+     * @param aPort
+     *        The port of the server socket.  Pass -1 to indicate no preference,
+     *        and a port will be selected automatically.
+     * @param aFlags
+     *        Flags for the socket.
+     * @param aBackLog
+     *        The maximum length the queue of pending connections may grow to.
+     *        This parameter may be silently limited by the operating system.
+     *        Pass -1 to use the default value.
+     */
+    void initSpecialConnection(in long aPort,
+                               in nsServerSocketFlag aFlags,
+                               in long aBackLog);
+
+
+    /**
+     * initWithAddress
+     *
+     * This method initializes a server socket, and binds it to a particular
+     * local address (and hence a particular local network interface).
+     *
+     * @param aAddr
+     *        The address to which this server socket should be bound.
+     * @param aBackLog
+     *        The maximum length the queue of pending connections may grow to.
+     *        This parameter may be silently limited by the operating system.
+     *        Pass -1 to use the default value.
+     */
+    [noscript] void initWithAddress([const] in PRNetAddrPtr aAddr, in long aBackLog);
+
+    /**
+     * initWithFilename
+     *
+     * This method initializes a Unix domain or "local" server socket. Such
+     * a socket has a name in the filesystem, like an ordinary file. To
+     * connect, a client supplies the socket's filename, and the usual
+     * permission checks on socket apply.
+     *
+     * This makes Unix domain sockets useful for communication between the
+     * programs being run by a specific user on a single machine: the
+     * operating system takes care of authentication, and the user's home
+     * directory or profile directory provide natural per-user rendezvous
+     * points.
+     *
+     * Since Unix domain sockets are always local to the machine, they are
+     * not affected by the nsIIOService's 'offline' flag.
+     *
+     * The system-level socket API may impose restrictions on the length of
+     * the filename that are stricter than those of the underlying
+     * filesystem. If the file name is too long, this returns
+     * NS_ERROR_FILE_NAME_TOO_LONG.
+     *
+     * All components of the path prefix of |aPath| must name directories;
+     * otherwise, this returns NS_ERROR_FILE_NOT_DIRECTORY.
+     *
+     * This call requires execute permission on all directories containing
+     * the one in which the socket is to be created, and write and execute
+     * permission on the directory itself. Otherwise, this returns
+     * NS_ERROR_CONNECTION_REFUSED.
+     *
+     * This call creates the socket's directory entry. There must not be
+     * any existing entry with the given name. If there is, this returns
+     * NS_ERROR_SOCKET_ADDRESS_IN_USE.
+     *
+     * On systems that don't support Unix domain sockets at all, this
+     * returns NS_ERROR_SOCKET_ADDRESS_NOT_SUPPORTED.
+     *
+     * @param aPath nsIFile
+     *        The file name at which the socket should be created.
+     *
+     * @param aPermissions unsigned long
+     *        Unix-style permission bits to be applied to the new socket.
+     *
+     * Note about permissions: Linux's unix(7) man page claims that some
+     * BSD-derived systems ignore permissions on UNIX-domain sockets;
+     * NetBSD's bind(2) man page agrees, but says it does check now (dated
+     * 2005). POSIX has required 'connect' to fail if write permission on
+     * the socket itself is not granted since 2003 (Issue 6). NetBSD says
+     * that the permissions on the containing directory (execute) have
+     * always applied, so creating sockets in appropriately protected
+     * directories should be secure on both old and new systems.
+     */
+    void initWithFilename(in nsIFile aPath, in unsigned long aPermissions,
+                          in long aBacklog);
+
+    /**
+     * initWithAbstractAddress
+     *
+     * This mehtod is a flavor of initWithFilename method. This initializes
+     * a UNIX domain socket that uses abstract socket address.
+     * This socket type is only supported on Linux and Android.
+     *
+     * On systems that don't support this type's UNIX domain sockets at all,
+     * this returns NS_ERROR_SOCKET_ADDRESS_NOT_SUPPORTED.
+     *
+     * @param aName
+     *        The abstract socket address which the socket should be created.
+     * @param aBacklog
+     *        The maximum length the queue of pending connections may grow to.
+     */
+    void initWithAbstractAddress(in AUTF8String aName,
+                                 in long aBacklog);
+
+    /**
+     * close
+     *
+     * This method closes a server socket.  This does not affect already
+     * connected client sockets (i.e., the nsISocketTransport instances
+     * created from this server socket).  This will cause the onStopListening
+     * event to asynchronously fire with a status of NS_BINDING_ABORTED.
+     */
+    void close();
+
+    /**
+     * asyncListen
+     *
+     * This method puts the server socket in the listening state.  It will
+     * asynchronously listen for and accept client connections.  The listener
+     * will be notified once for each client connection that is accepted.  The
+     * listener's onSocketAccepted method will be called on the same thread
+     * that called asyncListen (the calling thread must have a nsIEventTarget).
+     *
+     * The listener will be passed a reference to an already connected socket
+     * transport (nsISocketTransport).  See below for more details.
+     *
+     * @param aListener
+     *        The listener to be notified when client connections are accepted.
+     */
+    void asyncListen(in nsIServerSocketListener aListener);
+
+    /**
+     * Returns the port of this server socket.
+     */
+    readonly attribute long port;
+
+    /**
+     * Returns the address to which this server socket is bound.  Since a
+     * server socket may be bound to multiple network devices, this address
+     * may not necessarily be specific to a single network device.  In the
+     * case of an IP socket, the IP address field would be zerod out to
+     * indicate a server socket bound to all network devices.  Therefore,
+     * this method cannot be used to determine the IP address of the local
+     * system.  See nsIDNSService::myHostName if this is what you need.
+     */
+    [noscript] PRNetAddr getAddress();
+};
+
+/**
+ * nsIServerSocketListener
+ *
+ * This interface is notified whenever a server socket accepts a new connection.
+ * The transport is in the connected state, and read/write streams can be opened
+ * using the normal nsITransport API.  The address of the client can be found by
+ * calling the nsISocketTransport::GetAddress method or by inspecting
+ * nsISocketTransport::GetHost, which returns a string representation of the
+ * client's IP address (NOTE: this may be an IPv4 or IPv6 string literal).
+ */
+[scriptable, uuid(836d98ec-fee2-4bde-b609-abd5e966eabd)]
+interface nsIServerSocketListener : nsISupports
+{
+    /**
+     * onSocketAccepted
+     *
+     * This method is called when a client connection is accepted.
+     *
+     * @param aServ
+     *        The server socket.
+     * @param aTransport
+     *        The connected socket transport.
+     */
+    void onSocketAccepted(in nsIServerSocket aServ,
+                          in nsISocketTransport aTransport);
+
+    /**
+     * onStopListening
+     *
+     * This method is called when the listening socket stops for some reason.
+     * The server socket is effectively dead after this notification.
+     *
+     * @param aServ
+     *        The server socket.
+     * @param aStatus
+     *        The reason why the server socket stopped listening.  If the
+     *        server socket was manually closed, then this value will be
+     *        NS_BINDING_ABORTED.
+     */
+    void onStopListening(in nsIServerSocket aServ, in nsresult aStatus);
+};