diff options
Diffstat (limited to 'PACKAGERS')
| -rw-r--r-- | PACKAGERS | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/PACKAGERS b/PACKAGERS new file mode 100644 index 0000000..3042c66 --- /dev/null +++ b/PACKAGERS @@ -0,0 +1,243 @@ + +Information to packagers of XZ Utils +==================================== + + 0. Preface + 1. Package naming + 2. Package description + 3. License + 4. configure options + 5. Additional documentation + 6. Extra files + 7. Installing XZ Utils and LZMA Utils in parallel + 8. Example + + +0. Preface +---------- + + This document is meant for people who create and maintain XZ Utils + packages for operating system distributions. The focus is on GNU/Linux + systems, but most things apply to other systems too. + + While the standard "configure && make DESTDIR=$PKG install" should + give a pretty good package, there are some details which packagers + may want to tweak. + + Packagers should also read the INSTALL file. + + +1. Package naming +----------------- + + The preferred name for the XZ Utils package is "xz", because that's + the name of the upstream tarball. Naturally you may have good reasons + to use some other name; I won't get angry about it. ;-) It's just nice + to be able to point people to the correct package name without asking + what distro they have. + + If your distro policy is to split things into small pieces, here is + one suggestion: + + xz xz, xzdec, scripts (xzdiff, xzgrep, etc.), docs + xz-lzma lzma, unlzma, lzcat, lzgrep etc. symlinks and + lzmadec binary for compatibility with LZMA Utils + liblzma liblzma.so.* + liblzma-devel liblzma.so, liblzma.a, API headers + liblzma-doc Doxygen-generated liblzma API docs (HTML), + example programs + + +2. Package description +---------------------- + + Here is a suggestion which you may use as the package description. + If you can use only one-line description, pick only the first line. + Naturally, feel free to use some other description if you find it + better, and maybe send it to me too. + + Library and command line tools for XZ and LZMA compressed files + + XZ Utils provide a general purpose data compression library + and command line tools. The native file format is the .xz + format, but also the legacy .lzma format is supported. The .xz + format supports multiple compression algorithms, of which LZMA2 + is currently the primary algorithm. With typical files, XZ Utils + create about 30 % smaller files than gzip. + + If you are splitting XZ Utils into multiple packages, here are some + suggestions for package descriptions: + + xz: + + Command line tools for XZ and LZMA compressed files + + This package includes the xz compression tool and other command + line tools from XZ Utils. xz has command line syntax similar to + that of gzip. The native file format is the .xz format, but also + the legacy .lzma format is supported. The .xz format supports + multiple compression algorithms, of which LZMA2 is currently the + primary algorithm. With typical files, XZ Utils create about 30 % + smaller files than gzip. + + Note that this package doesn't include the files needed for + LZMA Utils 4.32.x compatibility. Install also the xz-lzma + package to make XZ Utils emulate LZMA Utils 4.32.x. + + xz-lzma: + + LZMA Utils emulation with XZ Utils + + This package includes executables and symlinks to make + XZ Utils emulate lzma, unlzma, lzcat, and other command + line tools found from the legacy LZMA Utils 4.32.x package. + + liblzma: + + Library for XZ and LZMA compressed files + + liblzma is a general purpose data compression library with + an API similar to that of zlib. liblzma supports multiple + algorithms, of which LZMA2 is currently the primary algorithm. + The native file format is .xz, but also the legacy .lzma + format and raw streams (no headers at all) are supported. + + This package includes the shared library. + + liblzma-devel: + + Library for XZ and LZMA compressed files + + This package includes the API headers, static library, and + other development files related to liblzma. + + liblzma-doc: + + liblzma API documentation in HTML and example usage + + This package includes the Doxygen-generated liblzma API + HTML docs and example programs showing how to use liblzma. + + +3. License +---------- + + If the package manager supports a license field, you probably should + put GPLv2+ there (GNU GPL v2 or later). The interesting parts of + XZ Utils are in the public domain, but some less important files + ending up into the binary package are under GPLv2+. So it is simplest + to just say GPLv2+ if you cannot specify "public domain and GPLv2+". + + If you split XZ Utils into multiple packages as described earlier + in this file, liblzma and liblzma-dev packages will contain only + public domain code (from XZ Utils at least; compiler or linker may + add some third-party code, which may be copyrighted). + + +4. configure options +-------------------- + + Unless you are building a package for a distribution that is meant + only for embedded systems, don't use the following configure options: + + --enable-debug + --enable-encoders (*) + --enable-decoders + --enable-match-finders + --enable-checks + --enable-small (*) + --disable-threads (*) + --disable-microlzma (*) + --disable-lzip-decoder (*) + + (*) These are OK when building xzdec and lzmadec as described + in INSTALL. + + xzdec and lzmadec don't provide any functionality that isn't already + available in the xz tool. Shipping xzdec and lzmadec without size + optimization and statically-linked liblzma isn't very useful. Doing + that would give users the xzdec man page, which may make it easier + for people to find out that such tools exists, but the executables + wouldn't have any advantage over the full-featured xz. + + +5. Additional documentation +--------------------------- + + "make install" copies some additional documentation to $docdir + (--docdir in configure). There is a copy of the GNU GPL v2, which + can be replaced with a symlink if your distro ships with shared + copies of the common license texts. + + The Doxygen-generated documentation (HTML) for the liblzma API + headers is included in the source release and will be installed by + "make install" to $docdir/api. All JavaScript is removed to + simplify license compliance and to reduce the install size. If the + liblzma API documentation is not desired, either run configure with + --disable-doc or remove the doc/api directory before running + "make install". + + +6. Extra files +-------------- + + The "extra" directory contains some small extra tools or other files. + The exact set of extra files can vary between XZ Utils releases. The + extra files have only limited use or they are too dangerous to be + put directly to $bindir (7z2lzma.sh is a good example, since it can + silently create corrupt output if certain conditions are not met). + + If you feel like it, you may copy the extra directory under the doc + directory (e.g. /usr/share/doc/xz/extra). Maybe some people will find + them useful. However, most people needing these tools probably are + able to find them from the source package too. + + The "debug" directory contains some tools that are useful only when + hacking on XZ Utils. Don't package these tools. + + +7. Installing XZ Utils and LZMA Utils in parallel +------------------------------------------------- + + XZ Utils and LZMA Utils 4.32.x can be installed in parallel by + omitting the compatibility symlinks (lzma, unlzma, lzcat, lzgrep etc.) + from the XZ Utils package. It's probably a good idea to still package + the symlinks into a separate package so that users may choose if they + want to use XZ Utils or LZMA Utils for handling .lzma files. + + +8. Example +---------- + + Here is an example for i686 GNU/Linux that + - links xz and lzmainfo against shared liblzma; + - links size-optimized xzdec and lzmadec against static liblzma + while avoiding libpthread dependency; + - includes only shared liblzma in the final package; and + - copies also the "extra" directory to the package. + + PKG=/tmp/xz-pkg + tar xf xz-x.y.z.tar.gz + cd xz-x.y.z + ./configure \ + --prefix=/usr \ + --disable-static \ + --disable-xzdec \ + --disable-lzmadec \ + CFLAGS='-march=i686 -mtune=generic -O2' + make + make DESTDIR=$PKG install-strip + make clean + ./configure \ + --prefix=/usr \ + --disable-shared \ + --disable-nls \ + --disable-encoders \ + --enable-small \ + --disable-threads \ + CFLAGS='-march=i686 -mtune=generic -Os' + make -C src/liblzma + make -C src/xzdec + make -C src/xzdec DESTDIR=$PKG install-strip + cp -a extra $PKG/usr/share/doc/xz + |