diff options
Diffstat (limited to 'doc/zutils.info')
| -rw-r--r-- | doc/zutils.info | 988 |
1 files changed, 988 insertions, 0 deletions
diff --git a/doc/zutils.info b/doc/zutils.info new file mode 100644 index 0000000..d7f9cb4 --- /dev/null +++ b/doc/zutils.info @@ -0,0 +1,988 @@ +This is zutils.info, produced by makeinfo version 4.13+ from zutils.texi. + +INFO-DIR-SECTION Compression +START-INFO-DIR-ENTRY +* Zutils: (zutils). Utilities dealing with compressed files +END-INFO-DIR-ENTRY + + +File: zutils.info, Node: Top, Next: Introduction, Up: (dir) + +Zutils Manual +************* + +This manual is for Zutils (version 1.13, 23 January 2024). + +* Menu: + +* Introduction:: Purpose and features of zutils +* Common options:: Options common to all utilities +* Configuration:: The configuration file zutils.conf +* Zcat:: Concatenating compressed files +* Zcmp:: Comparing compressed files byte by byte +* Zdiff:: Comparing compressed files line by line +* Zgrep:: Searching inside compressed files +* Ztest:: Testing the integrity of compressed files +* Zupdate:: Recompressing files to lzip format +* Problems:: Reporting bugs +* Concept index:: Index of concepts + + + Copyright (C) 2009-2024 Antonio Diaz Diaz. + + This manual is free documentation: you have unlimited permission to copy, +distribute, and modify it. + + +File: zutils.info, Node: Introduction, Next: Common options, Prev: Top, Up: Top + +1 Introduction +************** + +Zutils is a collection of utilities able to process any combination of +compressed and uncompressed files transparently. If any file given, +including standard input, is compressed, its decompressed content is used. +Compressed files are decompressed on the fly; no temporary files are +created. Data format is detected by its identifier string (magic bytes), not +by the file name extension. Empty files are considered uncompressed. + + These utilities are not wrapper scripts but safer and more efficient C++ +programs. In particular the option '--recursive' is very efficient in those +utilities supporting it. + +The utilities provided are 'zcat', 'zcmp', 'zdiff', 'zgrep', 'ztest', and +'zupdate'. +The formats supported are bzip2, gzip, lzip, xz, and zstd. +Zutils uses external compressors. The compressor to be used for each format +is configurable at runtime. + + 'zcat', 'zcmp', 'zdiff', and 'zgrep' are improved replacements for the +shell scripts provided by GNU gzip. 'ztest' is unique to zutils. 'zupdate' +is similar to gzip's znew. + + When 'zcat', 'zcmp', 'zdiff', or 'zgrep' need to try compressed file +names, the search order is: lzip, gzip, bzip2, zstd, xz. +(FILE.[lz|gz|bz2|zst|xz]). + + NOTE: Bzip2 and lzip provide well-defined values of exit status, which +makes them safe to use with zutils. Gzip and xz may return ambiguous warning +values, making them less reliable back ends for zutils. Zstd currently does +not even document its exit status in its man page. *Note +compressor-requirements::. + + FORMAT NOTE 1: The option '--format' allows the processing of a subset +of formats in recursive mode and when trying compressed file names. For +example, use the following command to search for the string 'foo' in gzip +and lzip files only: 'zgrep foo -r --format=gz,lz somedir somefile.tar'. + + FORMAT NOTE 2: The standard POSIX compress format (.Z) is obsolete and is +only supported through gzip. For this to work, the gzip program used (for +example GNU gzip) must be able to decompress .Z files. + + LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never +have been compressed. Decompressed is used to refer to data which have +undergone the process of decompression. + + +File: zutils.info, Node: Common options, Next: Configuration, Prev: Introduction, Up: Top + +2 Common options +**************** + +The following options: are available in all the utilities. Rather than +writing identical descriptions for each of the programs, they are described +here. Remember to prepend './' to any file name beginning with a hyphen, or +use '--'. *Note Argument syntax: (arg_parser)Argument syntax. + +'-h' +'--help' + Print an informative help message describing the options and exit. + 'zgrep' only supports the '--help' form of this option. + +'-V' +'--version' + Print the version number on the standard output and exit. This version + number should be included in all bug reports. In verbose mode, 'zdiff' + and 'zgrep' print also the version of the diff or grep program used + respectively. At verbosity level 1 (2 for 'zdiff' and 'zgrep') or + higher, print also the versions of the compressors used (perhaps + limited by option '--format'). (The compressors used must support the + option '-V' for this to work). + +'-M FORMAT_LIST' +'--format=FORMAT_LIST' + Process only the formats listed in the comma-separated FORMAT_LIST. + Valid formats are 'bz2', 'gz', 'lz', 'xz', 'zst', and 'un' for + 'uncompressed', meaning "any file name without a known extension". + This option excludes files based on extension, instead of format, + because it is more efficient. The exclusion only applies to names + generated automatically (for example when adding extensions to a file + name or when operating recursively on directories). Files given in the + command line are always processed. + + Each format in FORMAT_LIST enables file names with the following + extensions: + + bz2 enables .bz2 .tbz .tbz2 + gz enables .gz .tgz .Z + lz enables .lz .tlz + xz enables .xz .txz + zst enables .zst .tzst + un enables any other file name + +'-N' +'--no-rcfile' + Don't read the runtime configuration file 'zutils.conf'. + +'--bz2=COMMAND' +'--gz=COMMAND' +'--lz=COMMAND' +'--xz=COMMAND' +'--zst=COMMAND' + Set program to be used as decompressor for the corresponding format. + COMMAND may include arguments. For example '--lz='plzip --threads=2''. + 'zupdate' uses '--lz' for compression, not for decompression (*note + lz-compressor::). The name of the program can't begin with '-'. These + options override the values set in 'zutils.conf'. The compression + program used must meet three requirements: + + 1. When called with the option '-d' and without file names, it must + read compressed data from the standard input and produce + decompressed data on the standard output. + + 2. If the option '-q' is passed to zutils, the compression program + must also accept it. + + 3. It must return 0 if no errors occurred, and a non-zero value + otherwise. + + + Numbers given as arguments to options may be expressed in decimal, +hexadecimal, or octal (using the same syntax as integer constants in C++), +and may be followed by a multiplier and an optional 'B' for "byte". + + Table of SI and binary prefixes (unit multipliers): + +Prefix Value | Prefix Value +k kilobyte (10^3 = 1000) | Ki kibibyte (2^10 = 1024) +M megabyte (10^6) | Mi mebibyte (2^20) +G gigabyte (10^9) | Gi gibibyte (2^30) +T terabyte (10^12) | Ti tebibyte (2^40) +P petabyte (10^15) | Pi pebibyte (2^50) +E exabyte (10^18) | Ei exbibyte (2^60) +Z zettabyte (10^21) | Zi zebibyte (2^70) +Y yottabyte (10^24) | Yi yobibyte (2^80) +R ronnabyte (10^27) | Ri robibyte (2^90) +Q quettabyte (10^30) | Qi quebibyte (2^100) + + +File: zutils.info, Node: Configuration, Next: Zcat, Prev: Common options, Up: Top + +3 The configuration file 'zutils.conf' +************************************** + +'zutils.conf' is the runtime configuration file for zutils. In it you may +define the compressor name and options to be used for each format. +'zutils.conf' is optional; you don't need to install it in order to run +zutils. + + The compressors specified in the command line override those specified +in 'zutils.conf'. + + You may copy the system 'zutils.conf' file '${sysconfdir}/zutils.conf' +to '$XDG_CONFIG_HOME/zutils.conf' and customize these options as you like. +('XDG_CONFIG_HOME' defaults to '$HOME/.config'). The file syntax is fairly +obvious (and there are further instructions in it): + + 1. Any line beginning with '#' is a comment line. + + 2. Each non-comment line defines the command to be used for the + corresponding format, with the syntax: + <format> = <compressor> [options] + where <format> is one of 'bz2', 'gz', 'lz', 'xz', or 'zst'. + + +File: zutils.info, Node: Zcat, Next: Zcmp, Prev: Configuration, Up: Top + +4 Zcat +****** + +'zcat' copies each FILE argument to standard output in sequence. If any +file given is compressed, its decompressed content is copied. If a file +given does not exist, and its name does not end with one of the known +extensions, 'zcat' tries the compressed file names corresponding to the +formats supported until one is found. *Note search-order::. If a file fails +to decompress, 'zcat' continues copying the rest of the files. + + If a file is specified as '-', data are read from standard input, +decompressed if needed, and sent to standard output. Data read from +standard input must be of the same type; all uncompressed or all in the +same compressed format. + + If no files are specified, recursive searches examine the current working +directory, and nonrecursive searches read standard input. + + The format for running 'zcat' is: + + zcat [OPTIONS] [FILES] + +Exit status is 0 if no errors occurred, 1 otherwise. + + 'zcat' supports the following options: + +'-A' +'--show-all' + Equivalent to '-vET'. + +'-b' +'--number-nonblank' + Number all nonblank output lines, starting with 1. The line count is + unlimited. + +'-e' + Equivalent to '-vE'. + +'-E' +'--show-ends' + Print a '$' after the end of each line. + +'-n' +'--number' + Number all output lines, starting with 1. The line count is unlimited. + +'-O FORMAT' +'--force-format=FORMAT' + Force the compressed format given. Valid values for FORMAT are 'bz2', + 'gz', 'lz', 'xz', 'zst', and 'un' for 'uncompressed'. If this option + is used, the files are passed to the corresponding decompressor (or + transmitted unmodified) without checking their format, and the exact + file name must be given. Other names are not tried. + +'-q' +'--quiet' + Quiet operation. Suppress all messages. + +'-r' +'--recursive' + For each directory operand, read and process all files in that + directory, recursively. Follow symbolic links given in the command + line, but skip symbolic links that are encountered recursively. + +'-R' +'--dereference-recursive' + For each directory operand, read and process all files in that + directory, recursively, following all symbolic links. + +'-s' +'--squeeze-blank' + Replace multiple adjacent blank lines with a single blank line. + +'-t' + Equivalent to '-vT'. + +'-T' +'--show-tabs' + Print TAB characters as '^I'. + +'-v' +'--show-nonprinting' + Print control characters except for LF (newline) and TAB using '^' + notation and precede characters larger than 127 with 'M-' (which + stands for "meta"). + +'--verbose' + Verbose mode. Show error messages. Repeating it increases the verbosity + level. *Note version::. + + + +File: zutils.info, Node: Zcmp, Next: Zdiff, Prev: Zcat, Up: Top + +5 Zcmp +****** + +'zcmp' compares two files and, if they differ, writes to standard output +the first byte and line number where they differ. Bytes and lines are +numbered starting with 1. A hyphen '-' used as a FILE argument means +standard input. If any file given is compressed, its decompressed content +is used. Compressed files are decompressed on the fly; no temporary files +are created. + + The format for running 'zcmp' is: + + zcmp [OPTIONS] FILE1 [FILE2] + +This compares FILE1 to FILE2. The standard input is used only if FILE1 or +FILE2 refers to standard input. If FILE2 is omitted 'zcmp' tries to compare +FILE1 with the corresponding uncompressed file (if FILE1 is compressed), +and then with the corresponding compressed files of the remaining formats +until one is found. *Note search-order::. + +An exit status of 0 means no differences were found, 1 means some +differences were found, and 2 means trouble. + + 'zcmp' supports the following options: + +'-b' +'--print-bytes' + Print the values of the differing bytes (in octal by default) followed + by the bytes themselves in printable form. Print control bytes as a '^' + followed by a letter, and precede bytes larger than 127 with 'M-' + (which stands for "meta"). + +'-H' +'--hexadecimal' + Print the values of the differing bytes in hexadecimal instead of + octal. + +'-i SIZE' +'--ignore-initial=SIZE' + Ignore any differences in the first SIZE bytes of the input files. + Treat files with fewer than SIZE bytes as if they were empty. If SIZE + is in the form 'SIZE1:SIZE2', ignore the first SIZE1 bytes of the + first input file and the first SIZE2 bytes of the second input file. + +'-l' +'--list' + Print the byte numbers (in decimal) and values (in octal by default) + of all differing bytes. Bytes are numbered starting with 1. + +'-n COUNT' +'--bytes=COUNT' + Compare at most COUNT input bytes. + +'-O [FORMAT1][,FORMAT2]' +'--force-format=[FORMAT1][,FORMAT2]' + Force the compressed formats given. If FORMAT1 or FORMAT2 is omitted, + the corresponding format is automatically detected. Valid values for + FORMAT are 'bz2', 'gz', 'lz', 'xz', 'zst', and 'un' for + 'uncompressed'. If at least one format is specified with this option, + the file is passed to the corresponding decompressor (or transmitted + unmodified) without checking its format, and the exact file names of + both FILE1 and FILE2 must be given. Other names are not tried. + +'-q' +'--quiet' +'--silent' + Suppress diagnostics written to standard error, even the + 'EOF on <name_of_shorter_file>' diagnostic. Byte differences are still + written to standard output. ('-q' produces no output except byte + differences). + +'-s' +'--script' + Write nothing to standard output or standard error when files differ, + not even the 'EOF on <name_of_shorter_file>' diagnostic; indicate + differing files through exit status only. Diagnostic messages are still + written to standard error when an error is encountered. ('-s' produces + no output except error messages). + +'-v' +'--verbose' + Verbose mode. Undoes the effect of '--quiet'. Further -v's increase + the verbosity level. *Note version::. + + + +File: zutils.info, Node: Zdiff, Next: Zgrep, Prev: Zcmp, Up: Top + +6 Zdiff +******* + +'zdiff' compares two files and, if they differ, writes to standard output +the differences line by line. A hyphen '-' used as a FILE argument means +standard input. If any file given is compressed, its decompressed content +is used. 'zdiff' is a front end to the program diff and has the limitation +that messages from diff refer to temporary file names instead of those +specified. + + The format for running 'zdiff' is: + + zdiff [OPTIONS] FILE1 [FILE2] + +This compares FILE1 to FILE2. The standard input is used only if FILE1 or +FILE2 refers to standard input. If FILE2 is omitted 'zdiff' tries to +compare FILE1 with the corresponding uncompressed file (if FILE1 is +compressed), and then with the corresponding compressed files of the +remaining formats until one is found. *Note search-order::. + +An exit status of 0 means no differences were found, 1 means some +differences were found, and 2 means trouble. + + 'zdiff' supports the following options (some options only work if the +diff program used supports them): + +'-a' +'--text' + Treat all files as text. + +'-b' +'--ignore-space-change' + Ignore changes in the amount of white space. + +'-B' +'--ignore-blank-lines' + Ignore changes whose lines are all blank. + +'-c' + Use the context output format. + +'-C N' +'--context=N' + Same as -c but use N lines of context. + +'-d' +'--minimal' + Try hard to find a smaller set of changes. + +'-E' +'--ignore-tab-expansion' + Ignore changes due to tab expansion. + +'-i' +'--ignore-case' + Ignore case differences. Consider uppercase and lowercase letters + equivalent. + +'-O [FORMAT1][,FORMAT2]' +'--force-format=[FORMAT1][,FORMAT2]' + Force the compressed formats given. If FORMAT1 or FORMAT2 is omitted, + the corresponding format is automatically detected. Valid values for + FORMAT are 'bz2', 'gz', 'lz', 'xz', 'zst', and 'un' for + 'uncompressed'. If at least one format is specified with this option, + the file is passed to the corresponding decompressor (or transmitted + unmodified) without checking its format, and the exact file names of + both FILE1 and FILE2 must be given. Other names are not tried. + +'-p' +'--show-c-function' + Show which C function each change is in. + +'-q' +'--brief' + Output only whether files differ. + +'-s' +'--report-identical-files' + Report when two files are identical. + +'-t' +'--expand-tabs' + Expand tabs to spaces in output. + +'-T' +'--initial-tab' + Make tabs line up by prepending a tab. + +'-u' + Use the unified output format. + +'-U N' +'--unified=N' + Same as -u but use N lines of context. + +'-v' +'--verbose' + When specified before '--version', print the version of the diff + program used. Further -v's increase the verbosity level. *Note + version::. + +'-w' +'--ignore-all-space' + Ignore all white space. + +'-W COLUMNS' +'--width=COLUMNS' + Output at most the specified number of print columns per line in side + by side format. + +'-y' +'--side-by-side' + Use the side by side output format. + + + +File: zutils.info, Node: Zgrep, Next: Ztest, Prev: Zdiff, Up: Top + +7 Zgrep +******* + +'zgrep' is a front end to the program grep that allows transparent search +on any combination of compressed and uncompressed files. If any file given +is compressed, its decompressed content is used. If a file given does not +exist, and its name does not end with one of the known extensions, 'zgrep' +tries the compressed file names corresponding to the formats supported +until one is found. *Note search-order::. If a file fails to decompress, +'zgrep' continues searching the rest of the files. + + If a file is specified as '-', data are read from standard input, +decompressed if needed, and fed to grep. Data read from standard input must +be of the same type; all uncompressed or all in the same compressed format. + + If no files are specified, recursive searches examine the current working +directory, and nonrecursive searches read standard input. + + For efficiency reasons, 'zgrep' does not always read all its input. For +example, the shell command 'base64 -d foo | zgrep -q X' can cause 'zgrep' +to exit immediately after reading a line containing 'X', without bothering +to read the rest of its input data. This in turn can cause base64 to exit +with a nonzero status because base64 cannot write to its output pipe after +'zgrep' exits. + + The format for running 'zgrep' is: + + zgrep [OPTIONS] PATTERN [FILES] + +An exit status of 0 means at least one match was found, 1 means no matches +were found, and 2 means trouble. + + 'zgrep' supports the following options (Some options only work if the +grep program used supports them. Options -h, -H, -r, -R, and -Z are managed +by 'zgrep' and not passed to grep): + +'-a' +'--text' + Treat all files as text. + +'-A N' +'--after-context=N' + Print N lines of trailing context. + +'-b' +'--byte-offset' + Print the byte offset of each line. + +'-B N' +'--before-context=N' + Print N lines of leading context. + +'-c' +'--count' + Only print a count of matching lines per file. + +'-C N' +'--context=N' + Print N lines of output context. + +'--color[=WHEN]' + Show matched strings in color. WHEN is 'never', 'always', or 'auto'. + +'-e PATTERN' +'--regexp=PATTERN' + Use PATTERN as the pattern to match. + +'-E' +'--extended-regexp' + Interpret PATTERN as an extended regular expression (ERE). + +'-f FILE' +'--file=FILE' + Obtain patterns from FILE, one per line. + When searching in several files at once, command substitution can be + used with '-e' to read FILE only once, for example if FILE is not a + regular file: 'zgrep -e "$(cat FILE)" file1.lz file2.gz' + +'-F' +'--fixed-strings' + Interpret PATTERN as a set of newline-separated strings. + +'-G' +'--basic-regexp' + Interpret PATTERN as a basic regular expression (BRE). This is the + default. + +'-h' +'--no-filename' + Suppress the prefixing of file names on output when multiple files are + searched. + +'-H' +'--with-filename' + Print the file name for each match. + +'-i' +'--ignore-case' + Ignore case distinctions. + +'-I' + Ignore binary files. + +'-l' +'--files-with-matches' + Only print names of files containing at least one match. Stop reading + each file on the first match. + +'-L' +'--files-without-match' + Only print names of files not containing any matches. Stop reading + each file on the first match. + Note: option -L fails (prints wrong results, returns wrong status, and + even hangs) when using GNU grep versions 3.2 to 3.4 inclusive because + of a wrong change in the exit status of grep, which was reverted in + GNU grep 3.5. + +'--label=LABEL' + Display input actually coming from standard input as input coming from + file LABEL. + +'--line-buffered' + Use line buffering on output. This may cause a performance penalty. + +'-m N' +'--max-count=N' + Stop after N matches. + +'-n' +'--line-number' + Prefix each matched line with its line number in the input file. + +'-o' +'--only-matching' + Show only the part of matching lines that actually matches PATTERN. + +'-O FORMAT' +'--force-format=FORMAT' + Force the compressed format given. Valid values for FORMAT are 'bz2', + 'gz', 'lz', 'xz', 'zst', and 'un' for 'uncompressed'. If this option + is used, the files are passed to the corresponding decompressor (or + transmitted unmodified) without checking their format, and the exact + file name must be given. Other names are not tried. + +'-P' +'--perl-regexp' + Interpret PATTERN as a Perl-compatible regular expression (PCRE). + +'-q' +'--quiet' +'--silent' + Suppress all messages. Exit immediately with zero status if any match + is found, even if an error was detected. + +'-r' +'--recursive' + For each directory operand, read and process all files in that + directory, recursively. Follow symbolic links given in the command + line, but skip symbolic links that are encountered recursively. + +'-R' +'--dereference-recursive' + For each directory operand, read and process all files in that + directory, recursively, following all symbolic links. + +'-s' +'--no-messages' + Suppress error messages about nonexistent or unreadable files. + +'-T' +'--initial-tab' + Make sure that the first character of actual line content lies on a tab + stop, so that the alignment of tabs looks normal. + +'-U' +'--binary' + Use binary I/O on platforms affected by the bug known as "text mode + I/O". (MS-DOS, MS-Windows, OS/2). + +'-v' +'--invert-match' + Select non-matching lines. + +'--verbose' + Verbose mode. Show error messages. When specified before '--version', + print the version of the grep program used. Repeating it increases the + verbosity level. *Note version::. + +'-w' +'--word-regexp' + Match only whole words. + +'-x' +'--line-regexp' + Match only whole lines. + +'-Z' +'--null' + Output a zero byte (the ASCII NUL character) instead of the character + that normally follows a file name. For example, 'zgrep -lZ' outputs a + zero byte after each file name instead of the usual newline. This + option makes the output unambiguous, even in the presence of file + names containing unusual characters like newlines. + + + +File: zutils.info, Node: Ztest, Next: Zupdate, Prev: Zgrep, Up: Top + +8 Ztest +******* + +'ztest' checks the integrity of the compressed files specified. It also +warns if an uncompressed file has a compressed file name extension, or if a +compressed file has a wrong compressed extension. Uncompressed files are +otherwise ignored. If a file is specified as '-', the integrity of +compressed data read from standard input is checked. Data read from +standard input must be all in the same compressed format. If a file fails to +decompress, does not exist, can't be opened, or is a terminal, 'ztest' +continues testing the rest of the files. A final diagnostic is shown at +verbosity level 1 or higher if any file fails the test when testing multiple +files. + + If no files are specified, recursive searches examine the current working +directory, and nonrecursive searches read standard input. + + Bzip2, gzip, and lzip are the primary formats. Xz and zstd are optional. +If the decompressor for the xz or zstd formats is not found, the +corresponding files are ignored. + + Note that error detection in the xz format is broken. First, some xz +files lack integrity information. Second, not all xz decompressors can +check the integrity of all xz files. Third, section 2.1.1.2 'Stream Flags' +of the xz format specification allows xz decompressors to produce garbage +output without issuing any warning. Therefore, xz files can't always be +checked as reliably as files in the other formats can. + + The format for running 'ztest' is: + + ztest [OPTIONS] [FILES] + +Exit status is 0 if all compressed files check OK, 1 if environmental +problems (file not found, invalid command-line options, I/O errors, etc), 2 +if any compressed file is corrupt or invalid, or if any file has an +incorrect file name extension. + + 'ztest' supports the following options: + +'-O FORMAT' +'--force-format=FORMAT' + Force the compressed format given. Valid values for FORMAT are 'bz2', + 'gz', 'lz', 'xz', and 'zst'. If this option is used, the files are + passed to the corresponding decompressor without checking their + format, and any files in a format that the decompressor can't + understand fail the test. + +'-q' +'--quiet' + Quiet operation. Suppress all messages. + +'-r' +'--recursive' + For each directory operand, read and process all files in that + directory, recursively. Follow symbolic links given in the command + line, but skip symbolic links that are encountered recursively. + +'-R' +'--dereference-recursive' + For each directory operand, read and process all files in that + directory, recursively, following all symbolic links. + +'-v' +'--verbose' + Verbose mode. Show the check status for each file processed. Further + -v's increase the verbosity level. *Note version::. + + + +File: zutils.info, Node: Zupdate, Next: Problems, Prev: Ztest, Up: Top + +9 Zupdate +********* + +'zupdate' recompresses files from bzip2, gzip, xz, and zstd formats to lzip +format. Each original is compared with the new file and then deleted. Only +regular files with standard file name extensions are recompressed, other +files are ignored. Compressed files are decompressed and then recompressed +on the fly; no temporary files are created. If an error happens while +recompressing a file, 'zupdate' exits immediately without recompressing the +rest of the files. The lzip format is chosen as destination because it is +the most appropriate for long-term archiving. + + If no files are specified, recursive searches examine the current working +directory, and nonrecursive searches do nothing. + + If the lzip-compressed version of a file already exists, the file is +skipped unless the option '--force' is given. In this case, if the +comparison with the existing lzip version fails, an error is returned and +the original file is not deleted. The operation of 'zupdate' is meant to be +safe and not cause any data loss. Therefore, existing lzip-compressed files +are never overwritten nor deleted. + + Combining the options '--force' and '--keep', as in +'zupdate -f -k *.gz', checks that there are no differences between each +pair of files in a multiformat set of files. + + The names of the original files must have one of the following +extensions: +'.bz2', '.gz', '.xz', '.zst', or '.Z', which are recompressed to '.lz'; +'.tbz', '.tbz2', '.tgz', '.txz', or '.tzst', which are recompressed to +'.tlz'. +Keeping the combined extensions ('.tgz' --> '.tlz') may be useful when +recompressing Slackware packages, for example. + + Bzip2, gzip, and lzip are the primary formats. Xz and zstd are optional. +If the decompressor for the xz or zstd formats is not found, the +corresponding files are ignored. + + Recompressing a file is much like copying or moving it. Therefore +'zupdate' preserves the access and modification dates, permissions, and, if +you have appropriate privileges, ownership of the file just as 'cp -p' +does. (If the user ID or the group ID can't be duplicated, the file +permission bits S_ISUID and S_ISGID are cleared). + + The format for running 'zupdate' is: + + zupdate [OPTIONS] [FILES] + +Exit status is 0 if all the compressed files were successfully recompressed +(if needed), compared, and deleted (if requested). 1 if a non-fatal error +occurred (file not found or not regular, or has invalid format, or can't be +deleted). 2 if a fatal error occurred (invalid command-line options, +compressor can't be run, or comparison fails). + + 'zupdate' supports the following options: + +'-d DIR' +'--destdir=DIR' + Write recompressed files to another directory, using DIR as base + directory, instead of writing them in the same directory as the + original files. In recursive mode, this is done by replacing each + directory specified in the command line with DIR to produce the + recompressed file names. For example, 'zupdate -r -d DIR ../a' + recompresses a file named '../a/b/c.gz' to 'DIR/b/c.lz'. Regular files + specified in the command line are recompressed directly into DIR. For + example, 'zupdate -d DIR ../a/b/c.gz' writes the recompressed file to + 'DIR/c.lz'. + + This option allows recompressing files from a read-only file system to + another place without the need to copy or link them to the destination + directory first. (Remember to use option '--keep' when recompressing + read-only files to avoid warnings about files that can't be deleted). + +'-e' +'--expand-extensions' + Expand combined file name extensions; recompress '.tbz', '.tbz2', + '.tgz', '.txz', and '.tzst' to 'tar.lz'. + +'-f' +'--force' + Don't skip a file for which a lzip-compressed version already exists. + '--force' compares the content of the input file with the content of + the existing lzip file and deletes the input file if both contents are + identical. + +'-i' +'--ignore-errors' + Ignore non-fatal errors. (See exit status above). + +'-k' +'--keep' + Keep (don't delete) the input file after comparing it with the lzip + file. Use it when recompressing files from a read-only file system. + (See option '--destdir' above). + +'-l' +'--lzip-verbose' + Pass one option '-v' to the lzip compressor so that it shows the + compression ratio for each file processed. Using lzip 1.15 or newer, a + second '-l' shows the progress of compression. Use it together with + '-v' to see the name of the file. + +'-q' +'--quiet' + Quiet operation. Suppress all messages. + +'-r' +'--recursive' + For each directory operand, read and process all files in that + directory, recursively. Follow symbolic links given in the command + line, but skip symbolic links that are encountered recursively. + +'-R' +'--dereference-recursive' + For each directory operand, read and process all files in that + directory, recursively, following all symbolic links. + +'-v' +'--verbose' + Verbose mode. Show the files being processed. A second '-v' also shows + the files being ignored and increases the verbosity level. *Note + version::. + +'-0 .. -9' + Set the compression level of lzip. By default 'zupdate' passes '-9' to + lzip. Custom compression options can be passed to lzip with the option + '--lz'. For example '--lz='lzip -9 -s64MiB''. + +'--lz=COMMAND' + Set compression command. COMMAND may include arguments. For example + '--lz='plzip --threads=2''. The name of the program can't begin with + '-'. This option overrides the value set in 'zutils.conf'. The + compression program used does not need to implement decompression + (*note compressor-requirements::), but it must implement at least the + compression level option '-9' and the option '-o FILE' to write the + compressed output to FILE. tarlz meets these requirements, and + therefore can be used to recompress POSIX tar archives by using a + command like 'zupdate --lz='tarlz -9 -z --no-solid' archive.tar.gz'. + *Note tarlz manual: (tarlz)Top. + + + +File: zutils.info, Node: Problems, Next: Concept index, Prev: Zupdate, Up: Top + +10 Reporting bugs +***************** + +There are probably bugs in zutils. There are certainly errors and omissions +in this manual. If you report them, they will get fixed. If you don't, no +one will ever know about them and they will remain unfixed for all +eternity, if not longer. + + If you find a bug in zutils, please send electronic mail to +<zutils-bug@nongnu.org>. Include the version number, which you can find by +running 'zupdate --version'. + + +File: zutils.info, Node: Concept index, Prev: Problems, Up: Top + +Concept index +************* + + +* Menu: + +* bugs: Problems. (line 6) +* common options: Common options. (line 6) +* getting help: Problems. (line 6) +* introduction: Introduction. (line 6) +* zcat: Zcat. (line 6) +* zcmp: Zcmp. (line 6) +* zdiff: Zdiff. (line 6) +* zgrep: Zgrep. (line 6) +* ztest: Ztest. (line 6) +* zupdate: Zupdate. (line 6) +* zutils.conf: Configuration. (line 6) + + + +Tag Table: +Node: Top217 +Node: Introduction1152 +Ref: search-order2304 +Node: Common options3461 +Ref: version4027 +Ref: compressor-requirements5978 +Node: Configuration7367 +Node: Zcat8400 +Node: Zcmp11139 +Node: Zdiff14407 +Node: Zgrep17490 +Node: Ztest23637 +Node: Zupdate26430 +Ref: lz-compressor31838 +Node: Problems32539 +Node: Concept index33073 + +End Tag Table + + +Local Variables: +coding: iso-8859-15 +End: |