summaryrefslogtreecommitdiffstats
path: root/buildconf
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 15:01:30 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 15:01:30 +0000
commit6beeb1b708550be0d4a53b272283e17e5e35fe17 (patch)
tree1ce8673d4aaa948e5554000101f46536a1e4cc29 /buildconf
parentInitial commit. (diff)
downloadapache2-6beeb1b708550be0d4a53b272283e17e5e35fe17.tar.xz
apache2-6beeb1b708550be0d4a53b272283e17e5e35fe17.zip
Adding upstream version 2.4.57.upstream/2.4.57
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'buildconf')
-rwxr-xr-xbuildconf331
1 files changed, 331 insertions, 0 deletions
diff --git a/buildconf b/buildconf
new file mode 100755
index 0000000..4b35969
--- /dev/null
+++ b/buildconf
@@ -0,0 +1,331 @@
+#!/bin/sh
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# buildconf: Build the support scripts needed to compile from a
+# checked-out version of the source code.
+
+# version check for AC_PROG_CC_C99
+ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|sed -e 's/^[^0-9]*//;s/[a-z]* *$//;q'`
+case "$ac_version" in
+# versions older than 2.50 are denied by AC_PREREQ
+2.5*)
+ echo WARNING: You are using an outdated version of autoconf.
+ echo WARNING: This may lead to less than optimal performance of httpd.
+ echo WARNING: You should use autoconf 2.60 or newer.
+ sleep 1
+ ;;
+esac
+
+# set a couple of defaults for where we should be looking for our support libs.
+# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
+
+apr_src_dir="srclib/apr ../apr"
+apu_src_dir=""
+
+while test $# -gt 0
+do
+ # Normalize
+ case "$1" in
+ -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ case "$1" in
+ --with-apr=*)
+ apr_src_dir=$optarg
+ ;;
+
+ --with-apr-util=*)
+ apu_src_dir=$optarg
+ ;;
+
+ -h|--help)
+ cat <<EOF
+buildconf: generates the files needed to configure httpd.
+
+Usage: $0 [OPTION]...
+
+Configuration:
+ -h, --help display this help and exit
+
+ --with-apr=SRCDIR define a space-separated list of directories to
+ search for the APR source code. If, instead of a
+ directory, an apr-config executable name is passed,
+ APR-Config Mode is enabled (see below). Defaults to
+ "srclib/apr ../apr"
+ --with-apr-util=SRCDIR define a space-separated list of directories to
+ search for the APR-util source code. Defaults to the
+ same location as the --with-apr SRCDIR, but with
+ "apr" replaced with "apr-util" or "aprutil". Ignored
+ in APR-Config Mode.
+
+APR-Config Mode:
+
+ When passing an apr-config executable to --with-apr, buildconf will attempt to
+ copy build scripts from various installed locations on your system instead of
+ an APR source tree. This allows you to configure httpd from source without
+ also requiring you to download the APR and/or APR-util sources.
+
+ For example:
+
+ ./buildconf --with-apr=apr-1-config
+
+ For this functionality to work reliably, you must have automake >= 1.12 and be
+ using a distribution that includes both find_apr.m4 and find_apu.m4 in the
+ --installbuilddir pointed to by apr-config.
+
+Environment variables used by buildconf:
+ AUTOCONF autoconf executable name [autoconf]
+ AUTOMAKE automake executable name [automake]
+ AUTOHEADER autoheader executable name [autoheader]
+EOF
+ exit
+ ;;
+
+ *)
+ echo "unknown option $1 (try --help for usage)"
+ exit 1
+ ;;
+ esac
+
+ shift
+done
+
+#
+# Check to be sure that we have the srclib dependencies checked-out, or that a
+# working apr-config installation has been specified.
+#
+
+should_exit=0
+apr_config= # path to apr-config (empty if using a source directory)
+apr_found=0
+apu_found=0
+apr_major_version=2
+
+for dir in $apr_src_dir
+do
+ if [ -f "${dir}/build/apr_common.m4" ]; then
+ echo "found apr source: ${dir}"
+ apr_src_dir=$dir
+ apr_found=1
+ break
+ elif which "${dir}" >/dev/null 2>&1; then
+ # We're using apr-config. Do a sanity check.
+ apr_config=`which "${dir}"`
+ echo "testing apr-config executable: ${apr_config}"
+
+ version=`"${apr_config}" --version`
+ version=`echo "${version}" | sed -n '/^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$/p'`
+
+ if [ -z "${version}" ]; then
+ echo "apr-config gave us an invalid --version"
+ apr_config=
+ continue
+ fi
+
+ echo "using apr-config version ${version}"
+ apr_major_version=${version} # we'll make a real "major version" later
+ apr_src_dir=`"${apr_config}" --installbuilddir`
+ apr_found=1
+ break
+ fi
+done
+
+if [ $apr_found -lt 1 ]; then
+ echo ""
+ echo "You don't have a copy of the apr source in srclib/apr. "
+ echo "Please get the source using the following instructions,"
+ echo "or specify the location of the source with "
+ echo "--with-apr=[path to apr] :"
+ echo ""
+ echo " svn co http://svn.apache.org/repos/asf/apr/apr/trunk srclib/apr"
+ echo ""
+ should_exit=1
+elif [ -n "${apr_config}" ]; then
+ apr_major_version=`echo "${apr_major_version}" | sed 's/\..*//'`
+else
+ apr_major_version=`grep "#define APR_MAJOR_VERSION" \
+ $apr_src_dir/include/apr_version.h | sed 's/[^0-9]//g'`
+fi
+
+# Find APR-util. Note: if we're using apr-config, we can completely skip this,
+# even if APR is version 1. That's because we only end up caring about
+# find_apu.m4, which is not actually installed in the standard APR-util
+# distribution to begin with.
+if [ -z "${apr_config}" -a $apr_major_version -lt 2 ] ; then
+ if test -z "$apu_src_dir"; then
+ apu_src_dir=`echo $apr_src_dir | sed -e 's#/apr#/apr-util#g;'`
+ apu_src_dir="$apu_src_dir `echo $apr_src_dir | sed -e 's#/apr#/aprutil#;g'`"
+ apu_src_dir="$apu_src_dir srclib/apr-util ../apr-util"
+ fi
+
+ for dir in $apu_src_dir
+ do
+ if [ -f "${dir}/Makefile.in" ]; then
+ echo "found apr-util source: ${dir}"
+ apu_src_dir=$dir
+ apu_found=1
+ break
+ fi
+ done
+
+ if [ $apu_found -lt 1 ]; then
+ echo ""
+ echo "You don't have a copy of the apr-util source in srclib/apr-util. "
+ echo "Please get one the source using the following instructions, "
+ echo "or specify the location of the source with "
+ echo "--with-apr-util=[path to apr-util]:"
+ echo ""
+ echo " svn co http://svn.apache.org/repos/asf/apr/apr-util/branches/1.5.x srclib/apr-util"
+ echo ""
+ should_exit=1
+ fi
+fi
+
+if [ $should_exit -gt 0 ]; then
+ exit 1
+fi
+
+# These are temporary until Roy finishes the other build changes
+#
+touch .deps
+rm -f aclocal.m4
+rm -f generated_lists
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache
+
+case "`uname`" in
+*BSD/OS*)
+ ./build/bsd_makefile;;
+esac
+#
+# end temporary stuff
+
+apr_configure="$apr_src_dir/configure"
+if [ $apr_major_version -lt 2 ] ; then
+ aprutil_configure="$apu_src_dir/configure"
+fi
+config_h_in="include/ap_config_auto.h.in"
+
+cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
+
+if [ "$apr_src_dir" = "srclib/apr" ]; then
+ echo rebuilding $apr_configure
+ (cd srclib/apr && ./buildconf) || {
+ echo "./buildconf failed for apr"
+ exit 1
+ }
+ rm -f srclib/apr/apr.spec
+fi
+
+apr_src_dir=`cd $apr_src_dir && pwd`
+
+if [ $apr_major_version -lt 2 ] ; then
+ if [ "$apu_src_dir" = "srclib/apr-util" ]; then
+ echo rebuilding $aprutil_configure
+ (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
+ echo "./buildconf failed for apr-util"
+ exit 1
+ }
+ rm -f srclib/apr-util/apr-util.spec
+ fi
+
+ apu_src_dir=`cd $apu_src_dir && pwd`
+fi
+
+echo copying build files
+if [ -n "${apr_config}" ]; then
+ # If we're using apr-config, we switch things up a little bit:
+ # - use automake's config.* scripts instead of APR's
+ # - use the included PrintPath instead of copying from APR
+ # - assume find_apu.m4 is also in APR's --installbuilddir
+
+ # Figure out where to copy config.* from.
+ automake=${AUTOMAKE:-automake}
+ am_libdir=`"${automake}" --print-libdir`
+ cp "${am_libdir}/config.guess" "${am_libdir}/config.sub" build
+
+ # Remember that in this case, $apr_src_dir points to the build directory.
+ cp "$apr_src_dir/apr_common.m4" "$apr_src_dir/find_apr.m4" build
+ if [ $apr_major_version -lt 2 ] ; then
+ cp "$apr_src_dir/find_apu.m4" build
+ fi
+else
+ cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
+ $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
+ $apr_src_dir/build/find_apr.m4 build
+ if [ $apr_major_version -lt 2 ] ; then
+ cp $apu_src_dir/build/find_apu.m4 build
+ fi
+fi
+
+# Remove any libtool files so one can switch between libtool 1.3
+# and libtool 1.4 by simply rerunning the buildconf script.
+(cd build ; rm -f ltconfig ltmain.sh)
+
+if [ -z "${apr_config}" ]; then
+ # Optionally copy libtool-1.3.x files
+ if [ -f $apr_src_dir/build/ltconfig ]; then
+ cp $apr_src_dir/build/ltconfig build
+ fi
+ if [ -f $apr_src_dir/build/ltmain.sh ]; then
+ cp $apr_src_dir/build/ltmain.sh build
+ fi
+fi
+
+echo rebuilding $config_h_in
+rm -f $config_h_in
+${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
+
+echo rebuilding configure
+rm -f config.cache
+${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache
+
+if [ -f `which cut` ]; then
+ echo rebuilding rpm spec file
+ ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+ EPOCH=`build/get-version.sh epoch include/ap_release.h AP_SERVER`
+ REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
+ VERSION=`echo $REVISION | cut -d- -s -f1`
+ RELEASE=`echo $REVISION | cut -d- -s -f2`
+ if [ "x$VERSION" = "x" ]; then
+ VERSION=$REVISION
+ RELEASE=1
+ fi
+ cat ./build/rpm/httpd.spec.in | \
+ sed -e "s/APACHE_VERSION/$VERSION/" \
+ -e "s/APACHE_RELEASE/$RELEASE/" \
+ -e "s/APACHE_MMN/$VMMN/" \
+ -e "s/APACHE_EPOCH/$EPOCH/" \
+ > httpd.spec )
+fi
+
+# ensure that the ap_expr expression parser sources are never regenerated
+# when running make
+echo fixing timestamps for ap_expr sources
+cd server
+touch util_expr_parse.y util_expr_scan.l
+sleep 1
+touch util_expr_parse.c util_expr_parse.h util_expr_scan.c
+cd ..
+
+exit 0