Adding upstream version 115.7.0esr.upstream/115.7.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 5517 insertions, 0 deletions

diff --git a/testing/mozbase/mozdevice/mozdevice/__init__.py b/testing/mozbase/mozdevice/mozdevice/__init__.py
new file mode 100644
index 0000000000..e8e4965b92
--- /dev/null
+++ b/testing/mozbase/mozdevice/mozdevice/__init__.py
@@ -0,0 +1,181 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+"""mozdevice provides a Python interface to the Android Debug Bridge (adb) for Android Devices.
+
+mozdevice exports the following classes:
+
+ADBProcess is a class which is used by ADBCommand to execute commands
+via subprocess.Popen.
+
+ADBCommand is an internal only class which provides the basics of
+the interfaces for connecting to a device, and executing commands
+either on the host or device using ADBProcess.
+
+ADBHost is a Python class used to execute commands which are not
+necessarily associated with a specific device. It is intended to be
+used directly.
+
+ADBDevice is a Python class used to execute commands which will
+interact with a specific connected Android device.
+
+ADBAndroid inherits directly from ADBDevice and is essentially a
+synonym for ADBDevice. It is included for backwards compatibility only
+and should not be used in new code.
+
+ADBDeviceFactory is a Python function used to create instances of
+ADBDevice. ADBDeviceFactory is preferred over using ADBDevice to
+create new instances of ADBDevice since it will only create one
+instance of ADBDevice for each connected device.
+
+mozdevice exports the following exceptions:
+
+::
+
+    Exception -
+    |- ADBTimeoutError
+    |- ADBDeviceFactoryError
+    |- ADBError
+       |- ADBProcessError
+       |- ADBListDevicesError
+
+ADBTimeoutError is a special exception that is not part of the
+ADBError class hierarchy. It is raised when a command has failed to
+complete within the specified timeout period. Since this typically is
+due to a failure in the usb connection to the device and is not
+recoverable, it is implemented separately from ADBError so that it
+will not be caught by normal except clause handling of expected error
+conditions and is considered to be treated as a *fatal* error.
+
+ADBDeviceFactoryError is also a special exception that is not part
+of the ADBError class hierarchy. It is raised by ADBDeviceFactory
+when the state of the internal ADBDevices object is in an
+inconsistent state and is considered to be a *fatal* error.
+
+ADBListDevicesError is an instance of ADBError which is
+raised only by the ADBHost.devices() method to signify that
+``adb devices`` reports that the device state has no permissions and can
+not be contacted via adb.
+
+ADBProcessError is an instance of ADBError which is raised when a
+process executed via ADBProcess has exited with a non-zero exit
+code. It is raised by the ADBCommand.command method and the methods
+that call it.
+
+ADBError is a generic exception class to signify that some error
+condition has occured which may be handled depending on the semantics
+of the executing code.
+
+Example:
+
+::
+
+    from mozdevice import ADBHost, ADBDeviceFactory, ADBError
+
+    adbhost = ADBHost()
+    try:
+        adbhost.kill_server()
+        adbhost.start_server()
+    except ADBError as e:
+        print('Unable to restart the adb server: {}'.format(str(e)))
+
+    device = ADBDeviceFactory()
+    try:
+        sdcard_contents = device.ls('/sdcard/')  # List the contents of the sdcard on the device.
+        print('sdcard contains {}'.format(' '.join(sdcard_contents))
+    except ADBError as e:
+        print('Unable to list the sdcard: {}'.format(str(e)))
+
+Android devices use a security model based upon user permissions much
+like that used in Linux upon which it is based. The adb shell executes
+commands on the device as the shell user whose access to the files and
+directories on the device are limited by the directory and file
+permissions set in the device's file system.
+
+Android apps run under their own user accounts and are restricted by
+the app's requested permissions in terms of what commands and files
+and directories they may access.
+
+Like Linux, Android supports a root user who has unrestricted access
+to the command and content stored on the device.
+
+Most commercially released Android devices do not allow adb to run
+commands as the root user. Typically, only Android emulators running
+certain system images, devices which have AOSP debug or engineering
+Android builds or devices which have been *rooted* can run commands as
+the root user.
+
+ADBDevice supports using both unrooted and rooted devices by laddering
+its capabilities depending on the specific circumstances where it is
+used.
+
+ADBDevice uses a special location on the device, called the
+*test_root*, where it places content to be tested. This can include
+binary executables and libraries, configuration files and log
+files. Since the special location /data/local/tmp is usually
+accessible by the shell user, the test_root is located at
+/data/local/tmp/test_root by default. /data/local/tmp is used instead
+of the sdcard due to recent Scoped Storage restrictions on access to
+the sdcard in Android 10 and later.
+
+If the device supports running adbd as root, or if the device has been
+rooted and supports the use of the su command to run commands as root,
+ADBDevice will default to running all shell commands under the root
+user and the test_root will remain set to /data/local/tmp/test_root
+unless changed.
+
+If the device does not support running shell commands under the root
+user, and a *debuggable* app is set in ADBDevice property
+run_as_package, then ADBDevice will set the test_root to
+/data/data/<app-package-name>/test_root and will run shell commands as
+the app user when accessing content located in the app's data
+directory. Content can be pushed to the app's data directory or pulled
+from the app's data directory by using the command run-as to access
+the app's data.
+
+If a device does not support running commands as root and a
+*debuggable* app is not being used, command line programs can still be
+executed by pushing them to the /data/local/tmp directory which is
+accessible to the shell user.
+
+If for some reason, the device is not rooted and /data/local/tmp is
+not acccessible to the shell user, then ADBDevice will fail to
+initialize and will not be useable for that device.
+
+NOTE: ADBFactory will clear the contents of the test_root when it
+first creates an instance of ADBDevice.
+
+When the run_as_package property is set in an ADBDevice instance, it
+will clear the contents of the current test_root before changing the
+test_root to point to the new location
+/data/data/<app-package-name>/test_root which will then be cleared of
+any existing content.
+
+"""
+
+from .adb import (
+    ADBCommand,
+    ADBDevice,
+    ADBDeviceFactory,
+    ADBError,
+    ADBHost,
+    ADBProcess,
+    ADBProcessError,
+    ADBTimeoutError,
+)
+from .adb_android import ADBAndroid
+from .remote_process_monitor import RemoteProcessMonitor
+
+__all__ = [
+    "ADBError",
+    "ADBProcessError",
+    "ADBTimeoutError",
+    "ADBProcess",
+    "ADBCommand",
+    "ADBHost",
+    "ADBDevice",
+    "ADBAndroid",
+    "ADBDeviceFactory",
+    "RemoteProcessMonitor",
+]
diff --git a/testing/mozbase/mozdevice/mozdevice/adb.py b/testing/mozbase/mozdevice/mozdevice/adb.py
new file mode 100644
index 0000000000..cf1b78064e
--- /dev/null
+++ b/testing/mozbase/mozdevice/mozdevice/adb.py
@@ -0,0 +1,4440 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+import io
+import os
+import pipes
+import posixpath
+import re
+import shlex
+import shutil
+import signal
+import subprocess
+import sys
+import tempfile
+import time
+import traceback
+from distutils import dir_util
+from threading import Thread
+
+import six
+from six.moves import range
+
+from . import version_codes
+
+_TEST_ROOT = None
+
+
+class ADBProcess(object):
+    """ADBProcess encapsulates the data related to executing the adb process."""
+
+    def __init__(self, args, use_stdout_pipe=False, timeout=None):
+        #: command argument list.
+        self.args = args
+        Popen_args = {}
+
+        #: Temporary file handle to be used for stdout.
+        if use_stdout_pipe:
+            self.stdout_file = subprocess.PIPE
+            # Reading utf-8 from the stdout pipe
+            if sys.version_info >= (3, 6):
+                Popen_args["encoding"] = "utf-8"
+            else:
+                Popen_args["universal_newlines"] = True
+        else:
+            self.stdout_file = tempfile.NamedTemporaryFile(mode="w+b")
+        Popen_args["stdout"] = self.stdout_file
+
+        #: boolean indicating if the command timed out.
+        self.timedout = None
+
+        #: exitcode of the process.
+        self.exitcode = None
+
+        #: subprocess Process object used to execute the command.
+        Popen_args["stderr"] = subprocess.STDOUT
+        self.proc = subprocess.Popen(args, **Popen_args)
+
+        # If a timeout is set, then create a thread responsible for killing the
+        # process, as well as updating the exitcode and timedout status.
+        def timeout_thread(adb_process, timeout):
+            start_time = time.time()
+            polling_interval = 0.001
+            adb_process.exitcode = adb_process.proc.poll()
+            while (time.time() - start_time) <= float(
+                timeout
+            ) and adb_process.exitcode is None:
+                time.sleep(polling_interval)
+                adb_process.exitcode = adb_process.proc.poll()
+
+            if adb_process.exitcode is None:
+                adb_process.proc.kill()
+                adb_process.timedout = True
+                adb_process.exitcode = adb_process.proc.poll()
+
+        if timeout:
+            Thread(target=timeout_thread, args=(self, timeout), daemon=True).start()
+
+    @property
+    def stdout(self):
+        """Return the contents of stdout."""
+        assert not self.stdout_file == subprocess.PIPE
+        if not self.stdout_file or self.stdout_file.closed:
+            content = ""
+        else:
+            self.stdout_file.seek(0, os.SEEK_SET)
+            content = six.ensure_str(self.stdout_file.read().rstrip())
+        return content
+
+    def __str__(self):
+        # Remove -s <serialno> from the error message to allow bug suggestions
+        # to be independent of the individual failing device.
+        arg_string = " ".join(self.args)
+        arg_string = re.sub(r" -s [\w-]+", "", arg_string)
+        return "args: %s, exitcode: %s, stdout: %s" % (
+            arg_string,
+            self.exitcode,
+            self.stdout,
+        )
+
+    def __iter__(self):
+        assert self.stdout_file == subprocess.PIPE
+        return self
+
+    def __next__(self):
+        assert self.stdout_file == subprocess.PIPE
+        try:
+            return next(self.proc.stdout)
+        except StopIteration:
+            # Wait until the process ends.
+            while self.exitcode is None or self.timedout:
+                time.sleep(0.001)
+            raise StopIteration
+
+
+# ADBError and ADBTimeoutError are treated differently in order that
+# ADBTimeoutErrors can be handled distinctly from ADBErrors.
+
+
+class ADBError(Exception):
+    """ADBError is raised in situations where a command executed on a
+    device either exited with a non-zero exitcode or when an
+    unexpected error condition has occurred. Generally, ADBErrors can
+    be handled and the device can continue to be used.
+    """
+
+    pass
+
+
+class ADBProcessError(ADBError):
+    """ADBProcessError is raised when an associated ADBProcess is
+    available and relevant.
+    """
+
+    def __init__(self, adb_process):
+        ADBError.__init__(self, str(adb_process))
+        self.adb_process = adb_process
+
+
+class ADBListDevicesError(ADBError):
+    """ADBListDevicesError is raised when errors are found listing the
+    devices, typically not any permissions.
+
+    The devices information is stocked with the *devices* member.
+    """
+
+    def __init__(self, msg, devices):
+        ADBError.__init__(self, msg)
+        self.devices = devices
+
+
+class ADBTimeoutError(Exception):
+    """ADBTimeoutError is raised when either a host command or shell
+    command takes longer than the specified timeout to execute. The
+    timeout value is set in the ADBCommand constructor and is 300 seconds by
+    default. This error is typically fatal since the host is having
+    problems communicating with the device. You may be able to recover
+    by rebooting, but this is not guaranteed.
+
+    Recovery options are:
+
+    * Killing and restarting the adb server via
+      ::
+
+          adb kill-server; adb start-server
+
+    * Rebooting the device manually.
+    * Rebooting the host.
+    """
+
+    pass
+
+
+class ADBDeviceFactoryError(Exception):
+    """ADBDeviceFactoryError is raised when the ADBDeviceFactory is in
+    an inconsistent state.
+    """
+
+    pass
+
+
+class ADBCommand(object):
+    """ADBCommand provides a basic interface to adb commands
+    which is used to provide the 'command' methods for the
+    classes ADBHost and ADBDevice.
+
+    ADBCommand should only be used as the base class for other
+    classes and should not be instantiated directly. To enforce this
+    restriction calling ADBCommand's constructor will raise a
+    NonImplementedError exception.
+
+    :param str adb: path to adb executable. Defaults to 'adb'.
+    :param str adb_host: host of the adb server.
+    :param int adb_port: port of the adb server.
+    :param str logger_name: logging logger name. Defaults to 'adb'.
+    :param int timeout: The default maximum time in
+        seconds for any spawned adb process to complete before
+        throwing an ADBTimeoutError.  This timeout is per adb call. The
+        total time spent may exceed this value. If it is not
+        specified, the value defaults to 300.
+    :param bool verbose: provide verbose output
+    :param bool use_root: Use root if available on device
+    :raises: :exc:`ADBError`
+             :exc:`ADBTimeoutError`
+
+    ::
+
+       from mozdevice import ADBCommand
+
+       try:
+           adbcommand = ADBCommand()
+       except NotImplementedError:
+           print "ADBCommand can not be instantiated."
+    """
+
+    def __init__(
+        self,
+        adb="adb",
+        adb_host=None,
+        adb_port=None,
+        logger_name="adb",
+        timeout=300,
+        verbose=False,
+        use_root=True,
+    ):
+        if self.__class__ == ADBCommand:
+            raise NotImplementedError
+
+        self._logger = self._get_logger(logger_name, verbose)
+        self._verbose = verbose
+        self._use_root = use_root
+        self._adb_path = adb
+        self._adb_host = adb_host
+        self._adb_port = adb_port
+        self._timeout = timeout
+        self._polling_interval = 0.001
+        self._adb_version = ""
+
+        self._logger.debug("%s: %s" % (self.__class__.__name__, self.__dict__))
+
+        # catch early a missing or non executable adb command
+        # and get the adb version while we are at it.
+        try:
+            output = subprocess.Popen(
+                [adb, "version"], stdout=subprocess.PIPE, stderr=subprocess.PIPE
+            ).communicate()
+            re_version = re.compile(r"Android Debug Bridge version (.*)")
+            if isinstance(output[0], six.binary_type):
+                self._adb_version = re_version.match(
+                    output[0].decode("utf-8", "replace")
+                ).group(1)
+            else:
+                self._adb_version = re_version.match(output[0]).group(1)
+
+            if self._adb_version < "1.0.36":
+                raise ADBError(
+                    "adb version %s less than minimum 1.0.36" % self._adb_version
+                )
+
+        except Exception as exc:
+            raise ADBError("%s: %s is not executable." % (exc, adb))
+
+    def _get_logger(self, logger_name, verbose):
+        logger = None
+        level = "DEBUG" if verbose else "INFO"
+        try:
+            import mozlog
+
+            logger = mozlog.get_default_logger(logger_name)
+            if not logger:
+                if sys.__stdout__.isatty():
+                    defaults = {"mach": sys.stdout}
+                else:
+                    defaults = {"tbpl": sys.stdout}
+                logger = mozlog.commandline.setup_logging(
+                    logger_name, {}, defaults, formatter_defaults={"level": level}
+                )
+        except ImportError:
+            pass
+
+        if logger is None:
+            import logging
+
+            logger = logging.getLogger(logger_name)
+            logger.setLevel(level)
+        return logger
+
+    # Host Command methods
+
+    def command(self, cmds, device_serial=None, timeout=None):
+        """Executes an adb command on the host.
+
+        :param list cmds: The command and its arguments to be
+            executed.
+        :param str device_serial: The device's
+            serial number if the adb command is to be executed against
+            a specific device. If it is not specified, ANDROID_SERIAL
+            from the environment will be used if it is set.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBCommand constructor is used.
+        :return: :class:`ADBProcess`
+
+        command() provides a low level interface for executing
+        commands on the host via adb.
+
+        command() executes on the host in such a fashion that stdout
+        of the adb process is a file handle on the host and
+        the exit code is available as the exit code of the adb
+        process.
+
+        The caller provides a list containing commands, as well as a
+        timeout period in seconds.
+
+        A subprocess is spawned to execute adb with stdout and stderr
+        directed to a temporary file. If the process takes longer than
+        the specified timeout, the process is terminated.
+
+        It is the caller's responsibilty to clean up by closing
+        the stdout temporary file.
+        """
+        args = [self._adb_path]
+        device_serial = device_serial or os.environ.get("ANDROID_SERIAL")
+        if self._adb_host:
+            args.extend(["-H", self._adb_host])
+        if self._adb_port:
+            args.extend(["-P", str(self._adb_port)])
+        if device_serial:
+            args.extend(["-s", device_serial, "wait-for-device"])
+        args.extend(cmds)
+
+        adb_process = ADBProcess(args)
+
+        if timeout is None:
+            timeout = self._timeout
+
+        start_time = time.time()
+        adb_process.exitcode = adb_process.proc.poll()
+        while (time.time() - start_time) <= float(
+            timeout
+        ) and adb_process.exitcode is None:
+            time.sleep(self._polling_interval)
+            adb_process.exitcode = adb_process.proc.poll()
+        if adb_process.exitcode is None:
+            adb_process.proc.kill()
+            adb_process.timedout = True
+            adb_process.exitcode = adb_process.proc.poll()
+
+        adb_process.stdout_file.seek(0, os.SEEK_SET)
+
+        return adb_process
+
+    def command_output(self, cmds, device_serial=None, timeout=None):
+        """Executes an adb command on the host returning stdout.
+
+        :param list cmds: The command and its arguments to be
+            executed.
+        :param str device_serial: The device's
+            serial number if the adb command is to be executed against
+            a specific device. If it is not specified, ANDROID_SERIAL
+            from the environment will be used if it is set.
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBCommand constructor is used.
+        :return: str - content of stdout.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        adb_process = None
+        try:
+            # Need to force the use of the ADBCommand class's command
+            # since ADBDevice will redefine command and call its
+            # own version otherwise.
+            adb_process = ADBCommand.command(
+                self, cmds, device_serial=device_serial, timeout=timeout
+            )
+            if adb_process.timedout:
+                raise ADBTimeoutError("%s" % adb_process)
+            if adb_process.exitcode:
+                raise ADBProcessError(adb_process)
+            output = adb_process.stdout
+            if self._verbose:
+                self._logger.debug(
+                    "command_output: %s, "
+                    "timeout: %s, "
+                    "timedout: %s, "
+                    "exitcode: %s, output: %s"
+                    % (
+                        " ".join(adb_process.args),
+                        timeout,
+                        adb_process.timedout,
+                        adb_process.exitcode,
+                        output,
+                    )
+                )
+
+            return output
+        finally:
+            if adb_process and isinstance(adb_process.stdout_file, io.IOBase):
+                adb_process.stdout_file.close()
+
+
+class ADBHost(ADBCommand):
+    """ADBHost provides a basic interface to adb host commands
+    which do not target a specific device.
+
+    :param str adb: path to adb executable. Defaults to 'adb'.
+    :param str adb_host: host of the adb server.
+    :param int adb_port: port of the adb server.
+    :param logger_name: logging logger name. Defaults to 'adb'.
+    :param int timeout: The default maximum time in
+        seconds for any spawned adb process to complete before
+        throwing an ADBTimeoutError.  This timeout is per adb call. The
+        total time spent may exceed this value. If it is not
+        specified, the value defaults to 300.
+    :param bool verbose: provide verbose output
+    :raises: :exc:`ADBError`
+             :exc:`ADBTimeoutError`
+
+    ::
+
+       from mozdevice import ADBHost
+
+       adbhost = ADBHost()
+       adbhost.start_server()
+    """
+
+    def __init__(
+        self,
+        adb="adb",
+        adb_host=None,
+        adb_port=None,
+        logger_name="adb",
+        timeout=300,
+        verbose=False,
+    ):
+        ADBCommand.__init__(
+            self,
+            adb=adb,
+            adb_host=adb_host,
+            adb_port=adb_port,
+            logger_name=logger_name,
+            timeout=timeout,
+            verbose=verbose,
+            use_root=True,
+        )
+
+    def command(self, cmds, timeout=None):
+        """Executes an adb command on the host.
+
+        :param list cmds: The command and its arguments to be
+            executed.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBHost constructor is used.
+        :return: :class:`ADBProcess`
+
+        command() provides a low level interface for executing
+        commands on the host via adb.
+
+        command() executes on the host in such a fashion that stdout
+        of the adb process is a file handle on the host and
+        the exit code is available as the exit code of the adb
+        process.
+
+        The caller provides a list containing commands, as well as a
+        timeout period in seconds.
+
+        A subprocess is spawned to execute adb with stdout and stderr
+        directed to a temporary file. If the process takes longer than
+        the specified timeout, the process is terminated.
+
+        It is the caller's responsibilty to clean up by closing
+        the stdout temporary file.
+        """
+        return ADBCommand.command(self, cmds, timeout=timeout)
+
+    def command_output(self, cmds, timeout=None):
+        """Executes an adb command on the host returning stdout.
+
+        :param list cmds: The command and its arguments to be
+            executed.
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBHost constructor is used.
+        :return: str - content of stdout.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        return ADBCommand.command_output(self, cmds, timeout=timeout)
+
+    def start_server(self, timeout=None):
+        """Starts the adb server.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBHost constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+
+        Attempting to use start_server with any adb_host value other than None
+        will fail with an ADBError exception.
+
+        You will need to start the server on the remote host via the command:
+
+        .. code-block:: shell
+
+            adb -a fork-server server
+
+        If you wish the remote adb server to restart automatically, you can
+        enclose the command in a loop as in:
+
+        .. code-block:: shell
+
+            while true; do
+              adb -a fork-server server
+            done
+        """
+        self.command_output(["start-server"], timeout=timeout)
+
+    def kill_server(self, timeout=None):
+        """Kills the adb server.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBHost constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self.command_output(["kill-server"], timeout=timeout)
+
+    def devices(self, timeout=None):
+        """Executes adb devices -l and returns a list of objects describing attached devices.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBHost constructor is used.
+        :return: an object contain
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBListDevicesError`
+                 :exc:`ADBError`
+
+        The output of adb devices -l
+
+        ::
+
+            $ adb devices -l
+            List of devices attached
+            b313b945               device usb:1-7 product:d2vzw model:SCH_I535 device:d2vzw
+
+        is parsed and placed into an object as in
+
+        ::
+
+            [{'device_serial': 'b313b945', 'state': 'device', 'product': 'd2vzw',
+              'usb': '1-7', 'device': 'd2vzw', 'model': 'SCH_I535' }]
+        """
+        # b313b945               device usb:1-7 product:d2vzw model:SCH_I535 device:d2vzw
+        # from Android system/core/adb/transport.c statename()
+        re_device_info = re.compile(
+            r"([^\s]+)\s+(offline|bootloader|device|host|recovery|sideload|"
+            "no permissions|unauthorized|unknown)"
+        )
+        devices = []
+        lines = self.command_output(["devices", "-l"], timeout=timeout).splitlines()
+        for line in lines:
+            if line == "List of devices attached ":
+                continue
+            match = re_device_info.match(line)
+            if match:
+                device = {"device_serial": match.group(1), "state": match.group(2)}
+                remainder = line[match.end(2) :].strip()
+                if remainder:
+                    try:
+                        device.update(
+                            dict([j.split(":") for j in remainder.split(" ")])
+                        )
+                    except ValueError:
+                        self._logger.warning(
+                            "devices: Unable to parse " "remainder for device %s" % line
+                        )
+                devices.append(device)
+        for device in devices:
+            if device["state"] == "no permissions":
+                raise ADBListDevicesError(
+                    "No permissions to detect devices. You should restart the"
+                    " adb server as root:\n"
+                    "\n# adb kill-server\n# adb start-server\n"
+                    "\nor maybe configure your udev rules.",
+                    devices,
+                )
+        return devices
+
+
+ADBDEVICES = {}
+
+
+def ADBDeviceFactory(
+    device=None,
+    adb="adb",
+    adb_host=None,
+    adb_port=None,
+    test_root=None,
+    logger_name="adb",
+    timeout=300,
+    verbose=False,
+    device_ready_retry_wait=20,
+    device_ready_retry_attempts=3,
+    use_root=True,
+    share_test_root=True,
+    run_as_package=None,
+):
+    """ADBDeviceFactory provides a factory for :class:`ADBDevice`
+    instances that enforces the requirement that only one
+    :class:`ADBDevice` be created for each attached device. It uses
+    the identical arguments as the :class:`ADBDevice`
+    constructor. This is also used to ensure that the device's
+    test_root is initialized to an empty directory before tests are
+    run on the device.
+
+    :return: :class:`ADBDevice`
+    :raises: :exc:`ADBDeviceFactoryError`
+             :exc:`ADBError`
+             :exc:`ADBTimeoutError`
+
+    """
+    device = device or os.environ.get("ANDROID_SERIAL")
+    if device is not None and device in ADBDEVICES:
+        # We have already created an ADBDevice for this device, just re-use it.
+        adbdevice = ADBDEVICES[device]
+    elif device is None and ADBDEVICES:
+        # We did not specify the device serial number and we have
+        # already created an ADBDevice which means we must only have
+        # one device connected and we can re-use the existing ADBDevice.
+        devices = list(ADBDEVICES.keys())
+        assert (
+            len(devices) == 1
+        ), "Only one device may be connected if the device serial number is not specified."
+        adbdevice = ADBDEVICES[devices[0]]
+    elif (
+        device is not None
+        and device not in ADBDEVICES
+        or device is None
+        and not ADBDEVICES
+    ):
+        # The device has not had an ADBDevice created yet.
+        adbdevice = ADBDevice(
+            device=device,
+            adb=adb,
+            adb_host=adb_host,
+            adb_port=adb_port,
+            test_root=test_root,
+            logger_name=logger_name,
+            timeout=timeout,
+            verbose=verbose,
+            device_ready_retry_wait=device_ready_retry_wait,
+            device_ready_retry_attempts=device_ready_retry_attempts,
+            use_root=use_root,
+            share_test_root=share_test_root,
+            run_as_package=run_as_package,
+        )
+        ADBDEVICES[adbdevice._device_serial] = adbdevice
+    else:
+        raise ADBDeviceFactoryError(
+            "Inconsistent ADBDeviceFactory: device: %s, ADBDEVICES: %s"
+            % (device, ADBDEVICES)
+        )
+    # Clean the test root before testing begins.
+    if test_root:
+        adbdevice.rm(
+            posixpath.join(adbdevice.test_root, "*"),
+            recursive=True,
+            force=True,
+            timeout=timeout,
+        )
+    # Sync verbose and update the logger configuration in case it has
+    # changed since the initial initialization
+    if verbose != adbdevice._verbose:
+        adbdevice._verbose = verbose
+        adbdevice._logger = adbdevice._get_logger(adbdevice._logger.name, verbose)
+    return adbdevice
+
+
+class ADBDevice(ADBCommand):
+    """ADBDevice provides methods which can be used to interact with the
+    associated Android-based device.
+
+    :param str device: When a string is passed in device, it
+        is interpreted as the device serial number. This form is not
+        compatible with devices containing a ":" in the serial; in
+        this case ValueError will be raised.  When a dictionary is
+        passed it must have one or both of the keys "device_serial"
+        and "usb". This is compatible with the dictionaries in the
+        list returned by ADBHost.devices(). If the value of
+        device_serial is a valid serial not containing a ":" it will
+        be used to identify the device, otherwise the value of the usb
+        key, prefixed with "usb:" is used.  If None is passed and
+        there is exactly one device attached to the host, that device
+        is used. If None is passed and ANDROID_SERIAL is set in the environment,
+        that device is used. If there is more than one device attached and
+        device is None and ANDROID_SERIAL is not set in the environment, ValueError
+        is raised. If no device is attached the constructor will block
+        until a device is attached or the timeout is reached.
+    :param str adb_host: host of the adb server to connect to.
+    :param int adb_port: port of the adb server to connect to.
+    :param str test_root: value containing the test root to be
+        used on the device. This value will be shared among all
+        instances of ADBDevice if share_test_root is True.
+    :param str logger_name: logging logger name. Defaults to 'adb'
+    :param int timeout: The default maximum time in
+        seconds for any spawned adb process to complete before
+        throwing an ADBTimeoutError.  This timeout is per adb call. The
+        total time spent may exceed this value. If it is not
+        specified, the value defaults to 300.
+    :param bool verbose: provide verbose output
+    :param int device_ready_retry_wait: number of seconds to wait
+        between attempts to check if the device is ready after a
+        reboot.
+    :param integer device_ready_retry_attempts: number of attempts when
+        checking if a device is ready.
+    :param bool use_root: Use root if it is available on device
+    :param bool share_test_root: True if instance should share the
+        same test_root value with other ADBInstances. Defaults to True.
+    :param str run_as_package: Name of package to be used in run-as in liew of
+        using su.
+    :raises: :exc:`ADBError`
+             :exc:`ADBTimeoutError`
+             :exc:`ValueError`
+
+    ::
+
+       from mozdevice import ADBDevice
+
+       adbdevice = ADBDevice()
+       print(adbdevice.list_files("/mnt/sdcard"))
+       if adbdevice.process_exist("org.mozilla.geckoview.test_runner"):
+           print("org.mozilla.geckoview.test_runner is running")
+    """
+
+    SOCKET_DIRECTION_REVERSE = "reverse"
+
+    SOCKET_DIRECTION_FORWARD = "forward"
+
+    # BUILTINS is used to determine which commands can not be executed
+    # via su or run-as. This set of possible builtin commands was
+    # obtained from `man builtin` on Linux.
+    BUILTINS = set(
+        [
+            "alias",
+            "bg",
+            "bind",
+            "break",
+            "builtin",
+            "caller",
+            "cd",
+            "command",
+            "compgen",
+            "complete",
+            "compopt",
+            "continue",
+            "declare",
+            "dirs",
+            "disown",
+            "echo",
+            "enable",
+            "eval",
+            "exec",
+            "exit",
+            "export",
+            "false",
+            "fc",
+            "fg",
+            "getopts",
+            "hash",
+            "help",
+            "history",
+            "jobs",
+            "kill",
+            "let",
+            "local",
+            "logout",
+            "mapfile",
+            "popd",
+            "printf",
+            "pushd",
+            "pwd",
+            "read",
+            "readonly",
+            "return",
+            "set",
+            "shift",
+            "shopt",
+            "source",
+            "suspend",
+            "test",
+            "times",
+            "trap",
+            "true",
+            "type",
+            "typeset",
+            "ulimit",
+            "umask",
+            "unalias",
+            "unset",
+            "wait",
+        ]
+    )
+
+    def __init__(
+        self,
+        device=None,
+        adb="adb",
+        adb_host=None,
+        adb_port=None,
+        test_root=None,
+        logger_name="adb",
+        timeout=300,
+        verbose=False,
+        device_ready_retry_wait=20,
+        device_ready_retry_attempts=3,
+        use_root=True,
+        share_test_root=True,
+        run_as_package=None,
+    ):
+        global _TEST_ROOT
+
+        ADBCommand.__init__(
+            self,
+            adb=adb,
+            adb_host=adb_host,
+            adb_port=adb_port,
+            logger_name=logger_name,
+            timeout=timeout,
+            verbose=verbose,
+            use_root=use_root,
+        )
+        self._logger.info("Using adb %s" % self._adb_version)
+        self._device_serial = self._get_device_serial(device)
+        self._initial_test_root = test_root
+        self._share_test_root = share_test_root
+        if share_test_root and not _TEST_ROOT:
+            _TEST_ROOT = test_root
+        self._test_root = None
+        self._run_as_package = None
+        # Cache packages debuggable state.
+        self._debuggable_packages = {}
+        self._device_ready_retry_wait = device_ready_retry_wait
+        self._device_ready_retry_attempts = device_ready_retry_attempts
+        self._have_root_shell = False
+        self._have_su = False
+        self._have_android_su = False
+        self._selinux = None
+        self._re_internal_storage = None
+
+        self._wait_for_boot_completed(timeout=timeout)
+
+        # Record the start time of the ADBDevice initialization so we can
+        # determine if we should abort with an ADBTimeoutError if it is
+        # taking too long.
+        start_time = time.time()
+
+        # Attempt to get the Android version as early as possible in order
+        # to work around differences in determining adb command exit codes
+        # in Android before and after Android 7.
+        self.version = 0
+        while self.version < 1 and (time.time() - start_time) <= float(timeout):
+            try:
+                version = self.get_prop("ro.build.version.sdk", timeout=timeout)
+                self.version = int(version)
+            except ValueError:
+                self._logger.info("unexpected ro.build.version.sdk: '%s'" % version)
+                time.sleep(2)
+        if self.version < 1:
+            # note slightly different meaning to the ADBTimeoutError here (and above):
+            # failed to get valid (numeric) version string in all attempts in allowed time
+            raise ADBTimeoutError(
+                "ADBDevice: unable to determine ro.build.version.sdk."
+            )
+
+        self._mkdir_p = None
+        # Force the use of /system/bin/ls or /system/xbin/ls in case
+        # there is /sbin/ls which embeds ansi escape codes to colorize
+        # the output.  Detect if we are using busybox ls. We want each
+        # entry on a single line and we don't want . or ..
+        ls_dir = "/system"
+
+        # Using self.is_file is problematic on emulators either
+        # using ls or test to check for their existence.
+        # Executing the command to detect its existence works around
+        # any issues with ls or test.
+        boot_completed = False
+        while not boot_completed and (time.time() - start_time) <= float(timeout):
+            try:
+                self.shell_output("/system/bin/ls /system/bin/ls", timeout=timeout)
+                boot_completed = True
+                self._ls = "/system/bin/ls"
+            except ADBError as e1:
+                self._logger.debug("detect /system/bin/ls {}".format(e1))
+                try:
+                    self.shell_output(
+                        "/system/xbin/ls /system/xbin/ls", timeout=timeout
+                    )
+                    boot_completed = True
+                    self._ls = "/system/xbin/ls"
+                except ADBError as e2:
+                    self._logger.debug("detect /system/xbin/ls : {}".format(e2))
+            if not boot_completed:
+                time.sleep(2)
+        if not boot_completed:
+            raise ADBError("ADBDevice.__init__: ls could not be found")
+
+        # A race condition can occur especially with emulators where
+        # the device appears to be available but it has not completed
+        # mounting the sdcard. We can work around this by checking if
+        # the sdcard is missing when we attempt to ls it and retrying
+        # if it is not yet available.
+        boot_completed = False
+        while not boot_completed and (time.time() - start_time) <= float(timeout):
+            try:
+                self.shell_output("{} -1A {}".format(self._ls, ls_dir), timeout=timeout)
+                boot_completed = True
+                self._ls += " -1A"
+            except ADBError as e:
+                self._logger.debug("detect ls -1A: {}".format(e))
+                if "No such file or directory" not in str(e):
+                    boot_completed = True
+                    self._ls += " -a"
+            if not boot_completed:
+                time.sleep(2)
+        if not boot_completed:
+            raise ADBTimeoutError("ADBDevice: /sdcard not found.")
+
+        self._logger.info("%s supported" % self._ls)
+
+        # builtin commands which do not exist as separate programs can
+        # not be executed using su or run-as.  Remove builtin commands
+        # from self.BUILTINS which also exist as separate programs so
+        # that we will be able to execute them using su or run-as if
+        # necessary.
+        remove_builtins = set()
+        for builtin in self.BUILTINS:
+            try:
+                self.ls("/system/*bin/%s" % builtin, timeout=timeout)
+                self._logger.debug("Removing %s from BUILTINS" % builtin)
+                remove_builtins.add(builtin)
+            except ADBError:
+                pass
+        self.BUILTINS.difference_update(remove_builtins)
+
+        # Do we have cp?
+        boot_completed = False
+        while not boot_completed and (time.time() - start_time) <= float(timeout):
+            try:
+                self.shell_output("cp --help", timeout=timeout)
+                boot_completed = True
+                self._have_cp = True
+            except ADBError as e:
+                if "not found" in str(e):
+                    self._have_cp = False
+                    boot_completed = True
+                elif "known option" in str(e):
+                    self._have_cp = True
+                    boot_completed = True
+                elif "invalid option" in str(e):
+                    self._have_cp = True
+                    boot_completed = True
+            if not boot_completed:
+                time.sleep(2)
+        if not boot_completed:
+            raise ADBTimeoutError("ADBDevice: cp not found.")
+        self._logger.info("Native cp support: %s" % self._have_cp)
+
+        # Do we have chmod -R?
+        try:
+            self._chmod_R = False
+            re_recurse = re.compile(r"[-]R")
+            chmod_output = self.shell_output("chmod --help", timeout=timeout)
+            match = re_recurse.search(chmod_output)
+            if match:
+                self._chmod_R = True
+        except ADBError as e:
+            self._logger.debug("Check chmod -R: {}".format(e))
+            match = re_recurse.search(str(e))
+            if match:
+                self._chmod_R = True
+        self._logger.info("Native chmod -R support: {}".format(self._chmod_R))
+
+        # Do we have chown -R?
+        try:
+            self._chown_R = False
+            chown_output = self.shell_output("chown --help", timeout=timeout)
+            match = re_recurse.search(chown_output)
+            if match:
+                self._chown_R = True
+        except ADBError as e:
+            self._logger.debug("Check chown -R: {}".format(e))
+        self._logger.info("Native chown -R support: {}".format(self._chown_R))
+
+        try:
+            cleared = self.shell_bool('logcat -P ""', timeout=timeout)
+        except ADBError:
+            cleared = False
+        if not cleared:
+            self._logger.info("Unable to turn off logcat chatty")
+
+        # Do we have pidof?
+        if self.version < version_codes.N:
+            # unexpected pidof behavior observed on Android 6 in bug 1514363
+            self._have_pidof = False
+        else:
+            boot_completed = False
+            while not boot_completed and (time.time() - start_time) <= float(timeout):
+                try:
+                    self.shell_output("pidof --help", timeout=timeout)
+                    boot_completed = True
+                    self._have_pidof = True
+                except ADBError as e:
+                    if "not found" in str(e):
+                        self._have_pidof = False
+                        boot_completed = True
+                    elif "known option" in str(e):
+                        self._have_pidof = True
+                        boot_completed = True
+                if not boot_completed:
+                    time.sleep(2)
+            if not boot_completed:
+                raise ADBTimeoutError("ADBDevice: pidof not found.")
+        # Bug 1529960 observed pidof intermittently returning no results for a
+        # running process on the 7.0 x86_64 emulator.
+
+        characteristics = self.get_prop("ro.build.characteristics", timeout=timeout)
+
+        abi = self.get_prop("ro.product.cpu.abi", timeout=timeout)
+        self._have_flaky_pidof = (
+            self.version == version_codes.N
+            and abi == "x86_64"
+            and "emulator" in characteristics
+        )
+        self._logger.info(
+            "Native {} pidof support: {}".format(
+                "flaky" if self._have_flaky_pidof else "normal", self._have_pidof
+            )
+        )
+
+        if self._use_root:
+            # Detect if root is available, but do not fail if it is not.
+            # Catch exceptions due to the potential for segfaults
+            # calling su when using an improperly rooted device.
+
+            self._check_adb_root(timeout=timeout)
+
+            if not self._have_root_shell:
+                # To work around bug 1525401 where su -c id will return an
+                # exitcode of 1 if selinux permissive is not already in effect,
+                # we need su to turn off selinux prior to checking for su.
+                # We can use shell() directly to prevent the non-zero exitcode
+                # from raising an ADBError.
+                # Note: We are assuming su -c is supported and do not attempt to
+                # use su 0.
+                adb_process = self.shell("su -c setenforce 0")
+                self._logger.info(
+                    "su -c setenforce 0 exitcode %s, stdout: %s"
+                    % (adb_process.proc.poll(), adb_process.proc.stdout)
+                )
+
+                uid = "uid=0"
+                # Do we have a 'Superuser' sh like su?
+                try:
+                    if self.shell_output("su -c id", timeout=timeout).find(uid) != -1:
+                        self._have_su = True
+                        self._logger.info("su -c supported")
+                except ADBError as e:
+                    self._logger.debug("Check for su -c failed: {}".format(e))
+
+                # Check if Android's su 0 command works.
+                # su 0 id will hang on Pixel 2 8.1.0/OPM2.171019.029.B1/4720900
+                # rooted via magisk. If we already have detected su -c support,
+                # we can skip this check.
+                try:
+                    if (
+                        not self._have_su
+                        and self.shell_output("su 0 id", timeout=timeout).find(uid)
+                        != -1
+                    ):
+                        self._have_android_su = True
+                        self._logger.info("su 0 supported")
+                except ADBError as e:
+                    self._logger.debug("Check for su 0 failed: {}".format(e))
+
+        # Guarantee that /data/local/tmp exists and is accessible to all.
+        # It is a fatal error if /data/local/tmp does not exist and can not be created.
+        if not self.exists("/data/local/tmp", timeout=timeout):
+            # parents=True is required on emulator, where exist() may be flaky
+            self.mkdir("/data/local/tmp", parents=True, timeout=timeout)
+
+        # Beginning in Android 8.1 /data/anr/traces.txt no longer contains
+        # a single file traces.txt but instead will contain individual files
+        # for each stack.
+        # See https://github.com/aosp-mirror/platform_build/commit/
+        # fbba7fe06312241c7eb8c592ec2ac630e4316d55
+        stack_trace_dir = self.shell_output(
+            "getprop dalvik.vm.stack-trace-dir", timeout=timeout
+        )
+        if not stack_trace_dir:
+            stack_trace_file = self.shell_output(
+                "getprop dalvik.vm.stack-trace-file", timeout=timeout
+            )
+            if stack_trace_file:
+                stack_trace_dir = posixpath.dirname(stack_trace_file)
+            else:
+                stack_trace_dir = "/data/anr"
+        self.stack_trace_dir = stack_trace_dir
+        self.enforcing = "Permissive"
+        self.run_as_package = run_as_package
+
+        self._logger.debug("ADBDevice: %s" % self.__dict__)
+
+    @property
+    def is_rooted(self):
+        return self._have_root_shell or self._have_su or self._have_android_su
+
+    def _wait_for_boot_completed(self, timeout=None):
+        """Internal method to wait for boot to complete.
+
+        Wait for sys.boot_completed=1 and raise ADBError if boot does
+        not complete within retry attempts.
+
+        :param int timeout: The default maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value defaults to 300.
+        :raises: :exc:`ADBError`
+        """
+        for attempt in range(self._device_ready_retry_attempts):
+            sys_boot_completed = self.shell_output(
+                "getprop sys.boot_completed", timeout=timeout
+            )
+            if sys_boot_completed == "1":
+                break
+            time.sleep(self._device_ready_retry_wait)
+        if sys_boot_completed != "1":
+            raise ADBError("Failed to complete boot in time")
+
+    def _get_device_serial(self, device):
+        device = device or os.environ.get("ANDROID_SERIAL")
+        if device is None:
+            devices = ADBHost(
+                adb=self._adb_path, adb_host=self._adb_host, adb_port=self._adb_port
+            ).devices()
+            if len(devices) > 1:
+                raise ValueError(
+                    "ADBDevice called with multiple devices "
+                    "attached and no device specified"
+                )
+            if len(devices) == 0:
+                raise ADBError("No connected devices found.")
+            device = devices[0]
+
+        # Allow : in device serial if it matches a tcpip device serial.
+        re_device_serial_tcpip = re.compile(r"[^:]+:[0-9]+$")
+
+        def is_valid_serial(serial):
+            return (
+                serial.startswith("usb:")
+                or re_device_serial_tcpip.match(serial) is not None
+                or ":" not in serial
+            )
+
+        if isinstance(device, six.string_types):
+            # Treat this as a device serial
+            if not is_valid_serial(device):
+                raise ValueError(
+                    "Device serials containing ':' characters are "
+                    "invalid. Pass the output from "
+                    "ADBHost.devices() for the device instead"
+                )
+            return device
+
+        serial = device.get("device_serial")
+        if serial is not None and is_valid_serial(serial):
+            return serial
+        usb = device.get("usb")
+        if usb is not None:
+            return "usb:%s" % usb
+
+        raise ValueError("Unable to get device serial")
+
+    def _check_root_user(self, timeout=None):
+        uid = "uid=0"
+        # Is shell already running as root?
+        try:
+            if self.shell_output("id", timeout=timeout).find(uid) != -1:
+                self._logger.info("adbd running as root")
+                return True
+        except ADBError:
+            self._logger.debug("Check for root user failed")
+        return False
+
+    def _check_adb_root(self, timeout=None):
+        self._have_root_shell = self._check_root_user(timeout=timeout)
+
+        # Exclude these devices from checking for a root shell due to
+        # potential hangs.
+        exclude_set = set()
+        exclude_set.add("E5823")  # Sony Xperia Z5 Compact (E5823)
+        # Do we need to run adb root to get a root shell?
+        if not self._have_root_shell:
+            if self.get_prop("ro.product.model") in exclude_set:
+                self._logger.warning(
+                    "your device was excluded from attempting adb root."
+                )
+            else:
+                try:
+                    self.command_output(["root"], timeout=timeout)
+                    self._have_root_shell = self._check_root_user(timeout=timeout)
+                    if self._have_root_shell:
+                        self._logger.info("adbd restarted as root")
+                    else:
+                        self._logger.info("adbd not restarted as root")
+                except ADBError:
+                    self._logger.debug("Check for root adbd failed")
+
+    def pidof(self, app_name, timeout=None):
+        """
+        Return a list of pids for all extant processes running within the
+        specified application package.
+
+        :param str app_name: The name of the application package to examine
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per
+            adb call. The total time spent may exceed this
+            value. If it is not specified, the value set
+            in the ADBDevice constructor is used.
+        :return: List of integers containing the pid(s) of the various processes.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        if self._have_pidof:
+            try:
+                pid_output = self.shell_output("pidof %s" % app_name, timeout=timeout)
+                re_pids = re.compile(r"[0-9]+")
+                pids = re_pids.findall(pid_output)
+                if self._have_flaky_pidof and not pids:
+                    time.sleep(0.1)
+                    pid_output = self.shell_output(
+                        "pidof %s" % app_name, timeout=timeout
+                    )
+                    pids = re_pids.findall(pid_output)
+            except ADBError:
+                pids = []
+        else:
+            procs = self.get_process_list(timeout=timeout)
+            # limit the comparion to the first 75 characters due to a
+            # limitation in processname length in android.
+            pids = [proc[0] for proc in procs if proc[1] == app_name[:75]]
+
+        return [int(pid) for pid in pids]
+
+    def _sync(self, timeout=None):
+        """Sync the file system using shell_output in order that exceptions
+        are raised to the caller."""
+        self.shell_output("sync", timeout=timeout)
+
+    @staticmethod
+    def _should_quote(arg):
+        """Utility function if command argument should be quoted."""
+        if not arg:
+            return False
+        if arg[0] == "'" and arg[-1] == "'" or arg[0] == '"' and arg[-1] == '"':
+            # Already quoted
+            return False
+        re_quotable_chars = re.compile(r"[ ()\"&'\];]")
+        return re_quotable_chars.search(arg)
+
+    @staticmethod
+    def _quote(arg):
+        """Utility function to return quoted version of command argument."""
+        if hasattr(shlex, "quote"):
+            quote = shlex.quote
+        elif hasattr(pipes, "quote"):
+            quote = pipes.quote
+        else:
+
+            def quote(arg):
+                arg = arg or ""
+                re_unsafe = re.compile(r"[^\w@%+=:,./-]")
+                if re_unsafe.search(arg):
+                    arg = "'" + arg.replace("'", "'\"'\"'") + "'"
+                return arg
+
+        return quote(arg)
+
+    @staticmethod
+    def _escape_command_line(cmds):
+        """Utility function which takes a list of command arguments and returns
+        escaped and quoted version of the command as a string.
+        """
+        assert isinstance(cmds, list)
+        # This is identical to shlex.join in Python 3.8. We can
+        # replace it should we ever get Python 3.8 as a minimum.
+        quoted_cmd = " ".join([ADBDevice._quote(arg) for arg in cmds])
+
+        return quoted_cmd
+
+    @staticmethod
+    def _get_exitcode(file_obj):
+        """Get the exitcode from the last line of the file_obj for shell
+        commands executed on Android prior to Android 7.
+        """
+        re_returncode = re.compile(r"adb_returncode=([0-9]+)")
+        file_obj.seek(0, os.SEEK_END)
+
+        line = ""
+        length = file_obj.tell()
+        offset = 1
+        while length - offset >= 0:
+            file_obj.seek(-offset, os.SEEK_END)
+            char = six.ensure_str(file_obj.read(1))
+            if not char:
+                break
+            if char != "\r" and char != "\n":
+                line = char + line
+            elif line:
+                # we have collected everything up to the beginning of the line
+                break
+            offset += 1
+        match = re_returncode.match(line)
+        if match:
+            exitcode = int(match.group(1))
+            # Set the position in the file to the position of the
+            # adb_returncode and truncate it from the output.
+            file_obj.seek(-1, os.SEEK_CUR)
+            file_obj.truncate()
+        else:
+            exitcode = None
+            # We may have a situation where the adb_returncode= is not
+            # at the end of the output. This happens at least in the
+            # failure jit-tests on arm. To work around this
+            # possibility, we can search the entire output for the
+            # appropriate match.
+            file_obj.seek(0, os.SEEK_SET)
+            for line in file_obj:
+                line = six.ensure_str(line)
+                match = re_returncode.search(line)
+                if match:
+                    exitcode = int(match.group(1))
+                    break
+            # Reset the position in the file to the end.
+            file_obj.seek(0, os.SEEK_END)
+
+        return exitcode
+
+    def is_path_internal_storage(self, path, timeout=None):
+        """
+        Return True if the path matches an internal storage path
+        as defined by either '/sdcard', '/mnt/sdcard', or any of the
+        .*_STORAGE environment variables on the device otherwise False.
+
+        :param str path: The path to test.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBDevice constructor is used.
+        :return: boolean
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if not self._re_internal_storage:
+            storage_dirs = set(["/mnt/sdcard", "/sdcard"])
+            re_STORAGE = re.compile("([^=]+STORAGE)=(.*)")
+            lines = self.shell_output("set", timeout=timeout).split()
+            for line in lines:
+                m = re_STORAGE.match(line.strip())
+                if m and m.group(2):
+                    storage_dirs.add(m.group(2))
+            self._re_internal_storage = re.compile("/|".join(list(storage_dirs)) + "/")
+        return self._re_internal_storage.match(path) is not None
+
+    def is_package_debuggable(self, package):
+        if not package:
+            return False
+
+        if not self.is_app_installed(package):
+            self._logger.warning(
+                "Can not check if package %s is debuggable as it is not installed."
+                % package
+            )
+            return False
+
+        if package in self._debuggable_packages:
+            return self._debuggable_packages[package]
+
+        try:
+            self.shell_output("run-as %s ls /system" % package)
+            self._debuggable_packages[package] = True
+        except ADBError as e:
+            self._debuggable_packages[package] = False
+            self._logger.warning("Package %s is not debuggable: %s" % (package, str(e)))
+        return self._debuggable_packages[package]
+
+    @property
+    def package_dir(self):
+        if not self._run_as_package:
+            return None
+        # If we have a debuggable app and can use its directory to
+        # locate the test_root, this returns the location of the app's
+        # directory. If it is not located in the default location this
+        # will not be correct.
+        return "/data/data/%s" % self._run_as_package
+
+    @property
+    def run_as_package(self):
+        """Returns the name of the package which will be used in run-as to change
+        the effective user executing a command."""
+        return self._run_as_package
+
+    @run_as_package.setter
+    def run_as_package(self, value):
+        if self._have_root_shell or self._have_su or self._have_android_su:
+            # When we have root available, use that instead of run-as.
+            return
+
+        if self._run_as_package == value:
+            # Do nothing if the value doesn't change.
+            return
+
+        if not value:
+            if self._test_root:
+                # Make sure the old test_root is clean without using
+                # the test_root property getter.
+                self.rm(
+                    posixpath.join(self._test_root, "*"), recursive=True, force=True
+                )
+            self._logger.info(
+                "Setting run_as_package to None. Resetting test root from %s to %s"
+                % (self._test_root, self._initial_test_root)
+            )
+            self._run_as_package = None
+            # We must set _run_as_package to None before assigning to
+            # self.test_root in order to prevent attempts to use
+            # run-as.
+            self.test_root = self._initial_test_root
+            if self._test_root:
+                # Make sure the new test_root is clean.
+                self.rm(
+                    posixpath.join(self._test_root, "*"), recursive=True, force=True
+                )
+            return
+
+        if not self.is_package_debuggable(value):
+            self._logger.warning(
+                "Can not set run_as_package to %s since it is not debuggable." % value
+            )
+            # Since we are attempting to set run_as_package assume
+            # that we are not rooted and do not include
+            # /data/local/tmp as an option when checking for possible
+            # test_root paths using external storage.
+            paths = [
+                "/storage/emulated/0/Android/data/%s/test_root" % value,
+                "/sdcard/test_root",
+                "/mnt/sdcard/test_root",
+            ]
+            self._try_test_root_candidates(paths)
+            return
+
+        # Require these devices to have Verify bytecode turned off due to failures with run-as.
+        include_set = set()
+        include_set.add("SM-G973F")  # Samsung S10g SM-G973F
+
+        if (
+            self.get_prop("ro.product.model") in include_set
+            and self.shell_output("settings get global art_verifier_verify_debuggable")
+            == "1"
+        ):
+            self._logger.warning(
+                """Your device has Verify bytecode of debuggable apps set which
+            causes problems attempting to use run-as to delegate command execution to debuggable
+            apps. You must turn this setting off in Developer options on your device.
+            """
+            )
+            raise ADBError(
+                "Verify bytecode of debuggable apps must be turned off to use run-as"
+            )
+
+        self._logger.info("Setting run_as_package to %s" % value)
+
+        self._run_as_package = value
+        old_test_root = self._test_root
+        new_test_root = posixpath.join(self.package_dir, "test_root")
+        if old_test_root != new_test_root:
+            try:
+                # Make sure the old test_root is clean.
+                if old_test_root:
+                    self.rm(
+                        posixpath.join(old_test_root, "*"), recursive=True, force=True
+                    )
+                self.test_root = posixpath.join(self.package_dir, "test_root")
+                # Make sure the new test_root is clean.
+                self.rm(posixpath.join(self.test_root, "*"), recursive=True, force=True)
+            except ADBError as e:
+                # There was a problem using run-as to initialize
+                # the new test_root in the app's directory.
+                # Restore the old test root and raise an ADBError.
+                self._run_as_package = None
+                self.test_root = old_test_root
+                self._logger.warning(
+                    "Exception %s setting test_root to %s. "
+                    "Resetting test_root to %s."
+                    % (str(e), new_test_root, old_test_root)
+                )
+                raise ADBError(
+                    "Unable to initialize test root while setting run_as_package %s"
+                    % value
+                )
+
+    def enable_run_as_for_path(self, path):
+        return self._run_as_package is not None and path.startswith(self.package_dir)
+
+    @property
+    def test_root(self):
+        """
+        The test_root property returns the directory on the device where
+        temporary test files are stored.
+
+        The first time test_root it is called it determines and caches a value
+        for the test root on the device. It determines the appropriate test
+        root by attempting to create a 'proof' directory on each of a list of
+        directories and returning the first successful directory as the
+        test_root value. The cached value for the test_root will be shared
+        by subsequent instances of ADBDevice if self._share_test_root is True.
+
+        The default list of directories checked by test_root are:
+
+        If the device is rooted:
+            - /data/local/tmp/test_root
+
+        If run_as_package is not available and the device is not rooted:
+
+            - /data/local/tmp/test_root
+            - /sdcard/test_root
+            - /storage/sdcard/test_root
+            - /mnt/sdcard/test_root
+
+        You may override the default list by providing a test_root argument to
+        the :class:`ADBDevice` constructor which will then be used when
+        attempting to create the 'proof' directory.
+
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if self._test_root is not None:
+            self._logger.debug("Using cached test_root %s" % self._test_root)
+            return self._test_root
+
+        if self.run_as_package is not None:
+            raise ADBError(
+                "run_as_package is %s however test_root is None" % self.run_as_package
+            )
+
+        if self._share_test_root and _TEST_ROOT:
+            self._logger.debug(
+                "Attempting to use shared test_root %s" % self._test_root
+            )
+            paths = [_TEST_ROOT]
+        elif self._initial_test_root is not None:
+            self._logger.debug(
+                "Attempting to use initial test_root %s" % self._test_root
+            )
+            paths = [self._initial_test_root]
+        else:
+            # Android 10's scoped storage means we can no longer
+            # reliably host profiles and tests on the sdcard though it
+            # depends on the device. See
+            # https://developer.android.com/training/data-storage#scoped-storage
+            # Also see RunProgram in
+            # python/mozbuild/mozbuild/mach_commands.py where they
+            # choose /data/local/tmp as the default location for the
+            # profile because GeckoView only takes its configuration
+            # file from /data/local/tmp.  Since we have not specified
+            # a run_as_package yet, assume we may be attempting to use
+            # a shell program which creates files owned by the shell
+            # user and which would work using /data/local/tmp/ even if
+            # the device is not rooted. Fall back to external storage
+            # if /data/local/tmp is not available.
+            paths = ["/data/local/tmp/test_root"]
+            if not self.is_rooted:
+                # Note that /sdcard may be accessible while
+                # /mnt/sdcard is not.
+                paths.extend(
+                    [
+                        "/sdcard/test_root",
+                        "/storage/sdcard/test_root",
+                        "/mnt/sdcard/test_root",
+                    ]
+                )
+
+        return self._try_test_root_candidates(paths)
+
+    @test_root.setter
+    def test_root(self, value):
+        # Cache the requested test root so that
+        # other invocations of ADBDevice will pick
+        # up the same value.
+        global _TEST_ROOT
+        if self._test_root == value:
+            return
+        self._logger.debug("Setting test_root from %s to %s" % (self._test_root, value))
+        old_test_root = self._test_root
+        self._test_root = value
+        if self._share_test_root:
+            _TEST_ROOT = value
+        if not value:
+            return
+        if not self._try_test_root(value):
+            self._test_root = old_test_root
+            raise ADBError("Unable to set test_root to %s" % value)
+        readme = posixpath.join(value, "README")
+        if not self.is_file(readme):
+            tmpf = tempfile.NamedTemporaryFile(mode="w", delete=False)
+            tmpf.write(
+                "This directory is used by mozdevice to contain all content "
+                "related to running tests on this device.\n"
+            )
+            tmpf.close()
+            try:
+                self.push(tmpf.name, readme)
+            finally:
+                if tmpf:
+                    os.unlink(tmpf.name)
+
+    def _try_test_root_candidates(self, paths):
+        max_attempts = 3
+        for test_root in paths:
+            for attempt in range(1, max_attempts + 1):
+                self._logger.debug(
+                    "Setting test root to %s attempt %d of %d"
+                    % (test_root, attempt, max_attempts)
+                )
+
+                if self._try_test_root(test_root):
+                    if not self._test_root:
+                        # Cache the detected test_root so that we can
+                        # restore the value without having re-run
+                        # _try_test_root.
+                        self._initial_test_root = test_root
+                    self._test_root = test_root
+                    self._logger.info("Setting test_root to %s" % self._test_root)
+                    return self._test_root
+
+                self._logger.debug(
+                    "_setup_test_root: "
+                    "Attempt %d of %d failed to set test_root to %s"
+                    % (attempt, max_attempts, test_root)
+                )
+
+                if attempt != max_attempts:
+                    time.sleep(20)
+
+        raise ADBError(
+            "Unable to set up test root using paths: [%s]" % ", ".join(paths)
+        )
+
+    def _try_test_root(self, test_root):
+        try:
+            if not self.is_dir(test_root):
+                self.mkdir(test_root, parents=True)
+            proof_dir = posixpath.join(test_root, "proof")
+            if self.is_dir(proof_dir):
+                self.rm(proof_dir, recursive=True)
+            self.mkdir(proof_dir)
+            self.rm(proof_dir, recursive=True)
+        except ADBError as e:
+            self._logger.warning("%s is not writable: %s" % (test_root, str(e)))
+            return False
+
+        return True
+
+    # Host Command methods
+
+    def command(self, cmds, timeout=None):
+        """Executes an adb command on the host against the device.
+
+        :param list cmds: The command and its arguments to be
+            executed.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBDevice constructor is used.
+        :return: :class:`ADBProcess`
+
+        command() provides a low level interface for executing
+        commands for a specific device on the host via adb.
+
+        command() executes on the host in such a fashion that stdout
+        of the adb process are file handles on the host and
+        the exit code is available as the exit code of the adb
+        process.
+
+        For executing shell commands on the device, use
+        ADBDevice.shell().  The caller provides a list containing
+        commands, as well as a timeout period in seconds.
+
+        A subprocess is spawned to execute adb for the device with
+        stdout and stderr directed to a temporary file. If the process
+        takes longer than the specified timeout, the process is
+        terminated.
+
+        It is the caller's responsibilty to clean up by closing
+        the stdout temporary file.
+        """
+
+        return ADBCommand.command(
+            self, cmds, device_serial=self._device_serial, timeout=timeout
+        )
+
+    def command_output(self, cmds, timeout=None):
+        """Executes an adb command on the host against the device returning
+        stdout.
+
+        :param list cmds: The command and its arguments to be executed.
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: str - content of stdout.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        return ADBCommand.command_output(
+            self, cmds, device_serial=self._device_serial, timeout=timeout
+        )
+
+    # Networking methods
+
+    def _validate_port(self, port, is_local=True):
+        """Validate a port forwarding specifier. Raises ValueError on failure.
+
+        :param str port: The port specifier to validate
+        :param bool is_local: Flag indicating whether the port represents a local port.
+        """
+        prefixes = ["tcp", "localabstract", "localreserved", "localfilesystem", "dev"]
+
+        if not is_local:
+            prefixes += ["jdwp"]
+
+        parts = port.split(":", 1)
+        if len(parts) != 2 or parts[0] not in prefixes:
+            raise ValueError("Invalid port specifier %s" % port)
+
+    def _validate_direction(self, direction):
+        """Validate direction of the socket connection. Raises ValueError on failure.
+
+        :param str direction: The socket direction specifier to validate
+        :raises: :exc:`ValueError`
+        """
+        if direction not in [
+            self.SOCKET_DIRECTION_FORWARD,
+            self.SOCKET_DIRECTION_REVERSE,
+        ]:
+            raise ValueError("Invalid direction specifier {}".format(direction))
+
+    def create_socket_connection(
+        self, direction, local, remote, allow_rebind=True, timeout=None
+    ):
+        """Sets up a socket connection in the specified direction.
+
+        :param str direction: Direction of the socket connection
+        :param str local: Local port
+        :param str remote: Remote port
+        :param bool allow_rebind: Do not fail if port is already bound
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: When forwarding from "tcp:0", an int containing the port number
+                 of the local port assigned by adb, otherwise None.
+        :raises: :exc:`ValueError`
+                 :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        # validate socket direction, and local and remote port formatting.
+        self._validate_direction(direction)
+        for port, is_local in [(local, True), (remote, False)]:
+            self._validate_port(port, is_local=is_local)
+
+        cmd = [direction, local, remote]
+
+        if not allow_rebind:
+            cmd.insert(1, "--no-rebind")
+
+        # execute commands to establish socket connection.
+        cmd_output = self.command_output(cmd, timeout=timeout)
+
+        # If we want to forward using local port "tcp:0", then we're letting
+        # adb assign the port for us, so we need to return that assignment.
+        if (
+            direction == self.SOCKET_DIRECTION_FORWARD
+            and local == "tcp:0"
+            and cmd_output
+        ):
+            return int(cmd_output)
+
+        return None
+
+    def list_socket_connections(self, direction, timeout=None):
+        """Return a list of tuples specifying active socket connectionss.
+
+        Return values are of the form (device, local, remote).
+
+        :param str direction: 'forward' to list forward socket connections
+                          'reverse' to list reverse socket connections
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ValueError`
+                 :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self._validate_direction(direction)
+
+        cmd = [direction, "--list"]
+        output = self.command_output(cmd, timeout=timeout)
+        return [tuple(line.split(" ")) for line in output.splitlines() if line.strip()]
+
+    def remove_socket_connections(self, direction, local=None, timeout=None):
+        """Remove existing socket connections for a given direction.
+
+        :param str direction: 'forward' to remove forward socket connection
+                          'reverse' to remove reverse socket connection
+        :param str local: local port specifier as for ADBDevice.forward. If local
+            is not specified removes all forwards.
+        :param int timeout: The maximum time in seconds
+            for any spawned adb process to complete before throwing
+            an ADBTimeoutError. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ValueError`
+                 :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self._validate_direction(direction)
+
+        cmd = [direction]
+
+        if local is None:
+            cmd.extend(["--remove-all"])
+        else:
+            self._validate_port(local, is_local=True)
+            cmd.extend(["--remove", local])
+
+        self.command_output(cmd, timeout=timeout)
+
+    # Legacy port forward methods
+
+    def forward(self, local, remote, allow_rebind=True, timeout=None):
+        """Forward a local port to a specific port on the device.
+
+        :return: When forwarding from "tcp:0", an int containing the port number
+                 of the local port assigned by adb, otherwise None.
+
+        See `ADBDevice.create_socket_connection`.
+        """
+        return self.create_socket_connection(
+            self.SOCKET_DIRECTION_FORWARD, local, remote, allow_rebind, timeout
+        )
+
+    def list_forwards(self, timeout=None):
+        """Return a list of tuples specifying active forwards.
+
+        See `ADBDevice.list_socket_connection`.
+        """
+        return self.list_socket_connections(self.SOCKET_DIRECTION_FORWARD, timeout)
+
+    def remove_forwards(self, local=None, timeout=None):
+        """Remove existing port forwards.
+
+        See `ADBDevice.remove_socket_connection`.
+        """
+        self.remove_socket_connections(self.SOCKET_DIRECTION_FORWARD, local, timeout)
+
+    # Legacy port reverse methods
+
+    def reverse(self, local, remote, allow_rebind=True, timeout=None):
+        """Sets up a reverse socket connection from device to host.
+
+        See `ADBDevice.create_socket_connection`.
+        """
+        self.create_socket_connection(
+            self.SOCKET_DIRECTION_REVERSE, local, remote, allow_rebind, timeout
+        )
+
+    def list_reverses(self, timeout=None):
+        """Returns a list of tuples showing active reverse socket connections.
+
+        See `ADBDevice.list_socket_connection`.
+        """
+        return self.list_socket_connections(self.SOCKET_DIRECTION_REVERSE, timeout)
+
+    def remove_reverses(self, local=None, timeout=None):
+        """Remove existing reverse socket connections.
+
+        See `ADBDevice.remove_socket_connection`.
+        """
+        self.remove_socket_connections(self.SOCKET_DIRECTION_REVERSE, local, timeout)
+
+    # Device Shell methods
+
+    def shell(
+        self,
+        cmd,
+        env=None,
+        cwd=None,
+        timeout=None,
+        stdout_callback=None,
+        yield_stdout=None,
+        enable_run_as=False,
+    ):
+        """Executes a shell command on the device.
+
+        :param str cmd: The command to be executed.
+        :param dict env: Contains the environment variables and
+            their values.
+        :param str cwd: The directory from which to execute.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBDevice constructor is used.
+        :param function stdout_callback: Function called for each line of output.
+        :param bool yield_stdout: Flag used to make the returned process
+            iteratable. The return process can be used in a loop to get the output
+            and the loop would exit as the process ends.
+        :param bool enable_run_as: Flag used to temporarily enable use
+            of run-as to execute the command.
+        :return: :class:`ADBProcess`
+
+        shell() provides a low level interface for executing commands
+        on the device via adb shell.
+
+        shell() executes on the host in such as fashion that stdout
+        contains the stdout and stderr of the host abd process
+        combined with the stdout and stderr of the shell command
+        on the device. The exit code of shell() is the exit code of
+        the adb command if it was non-zero or the extracted exit code
+        from the output of the shell command executed on the
+        device.
+
+        The caller provides a flag indicating if the command is to be
+        executed as root, a string for any requested working
+        directory, a hash defining the environment, a string
+        containing shell commands, as well as a timeout period in
+        seconds.
+
+        The command line to be executed is created to set the current
+        directory, set the required environment variables, optionally
+        execute the command using su and to output the return code of
+        the command to stdout. The command list is created as a
+        command sequence separated by && which will terminate the
+        command sequence on the first command which returns a non-zero
+        exit code.
+
+        A subprocess is spawned to execute adb shell for the device
+        with stdout and stderr directed to a temporary file. If the
+        process takes longer than the specified timeout, the process
+        is terminated. The return code is extracted from the stdout
+        and is then removed from the file.
+
+        It is the caller's responsibilty to clean up by closing
+        the stdout temporary files.
+
+        If the yield_stdout flag is set, then the returned ADBProcess
+        can be iterated over to get the output as it is produced by
+        adb command. The iterator ends when the process timed out or
+        if it exited. This flag is incompatible with stdout_callback.
+
+        """
+
+        def _timed_read_line_handler(signum, frame):
+            raise IOError("ReadLineTimeout")
+
+        def _timed_read_line(filehandle, timeout=None):
+            """
+            Attempt to readline from filehandle. If readline does not return
+            within timeout seconds, raise IOError('ReadLineTimeout').
+            On Windows, required signal facilities are usually not available;
+            as a result, the timeout is not respected and some reads may
+            block on Windows.
+            """
+            if not hasattr(signal, "SIGALRM"):
+                return filehandle.readline()
+            if timeout is None:
+                timeout = 5
+            line = ""
+            default_alarm_handler = signal.getsignal(signal.SIGALRM)
+            signal.signal(signal.SIGALRM, _timed_read_line_handler)
+            signal.alarm(int(timeout))
+            try:
+                line = filehandle.readline()
+            finally:
+                signal.alarm(0)
+                signal.signal(signal.SIGALRM, default_alarm_handler)
+            return line
+
+        first_word = cmd.split(" ")[0]
+        if first_word in self.BUILTINS:
+            # Do not attempt to use su or run-as with builtin commands
+            pass
+        elif self._have_root_shell:
+            pass
+        elif self._have_android_su:
+            cmd = "su 0 %s" % cmd
+        elif self._have_su:
+            cmd = "su -c %s" % ADBDevice._quote(cmd)
+        elif self._run_as_package and enable_run_as:
+            cmd = "run-as %s %s" % (self._run_as_package, cmd)
+        else:
+            pass
+
+        # prepend cwd and env to command if necessary
+        if cwd:
+            cmd = "cd %s && %s" % (cwd, cmd)
+        if env:
+            envstr = "&& ".join(["export %s=%s" % (x[0], x[1]) for x in env.items()])
+            cmd = envstr + "&& " + cmd
+        # Before Android 7, an exitcode 0 for the process on the host
+        # did not mean that the exitcode of the Android process was
+        # also 0. We therefore used the echo adb_returncode=$? hack to
+        # obtain it there. However Android 7 and later intermittently
+        # do not emit the adb_returncode in stdout using this hack. In
+        # Android 7 and later the exitcode of the host process does
+        # match the exitcode of the Android process and we can use it
+        # directly.
+        if (
+            self._device_serial.startswith("emulator")
+            or not hasattr(self, "version")
+            or self.version < version_codes.N
+        ):
+            cmd += "; echo adb_returncode=$?"
+
+        args = [self._adb_path]
+        if self._adb_host:
+            args.extend(["-H", self._adb_host])
+        if self._adb_port:
+            args.extend(["-P", str(self._adb_port)])
+        if self._device_serial:
+            args.extend(["-s", self._device_serial])
+        args.extend(["wait-for-device", "shell", cmd])
+
+        if timeout is None:
+            timeout = self._timeout
+
+        if yield_stdout:
+            # When using yield_stdout, rely on the timeout implemented in
+            # ADBProcess instead of relying on our own here.
+            assert not stdout_callback
+            return ADBProcess(args, use_stdout_pipe=yield_stdout, timeout=timeout)
+        else:
+            adb_process = ADBProcess(args)
+
+        start_time = time.time()
+        exitcode = adb_process.proc.poll()
+        if not stdout_callback:
+            while ((time.time() - start_time) <= float(timeout)) and exitcode is None:
+                time.sleep(self._polling_interval)
+                exitcode = adb_process.proc.poll()
+        else:
+            stdout2 = io.open(adb_process.stdout_file.name, "rb")
+            partial = b""
+            while ((time.time() - start_time) <= float(timeout)) and exitcode is None:
+                try:
+                    line = _timed_read_line(stdout2)
+                    if line and len(line) > 0:
+                        if line.endswith(b"\n") or line.endswith(b"\r"):
+                            line = partial + line
+                            partial = b""
+                            line = line.rstrip()
+                            if self._verbose:
+                                self._logger.info(six.ensure_str(line))
+                            stdout_callback(line)
+                        else:
+                            # no more output available now, but more to come?
+                            partial = partial + line
+                    else:
+                        # no new output, so sleep and poll
+                        time.sleep(self._polling_interval)
+                except IOError:
+                    pass
+                exitcode = adb_process.proc.poll()
+        if exitcode is None:
+            adb_process.proc.kill()
+            adb_process.timedout = True
+            adb_process.exitcode = adb_process.proc.poll()
+        elif exitcode == 0:
+            if (
+                not self._device_serial.startswith("emulator")
+                and hasattr(self, "version")
+                and self.version >= version_codes.N
+            ):
+                adb_process.exitcode = 0
+            else:
+                adb_process.exitcode = self._get_exitcode(adb_process.stdout_file)
+        else:
+            adb_process.exitcode = exitcode
+
+        if stdout_callback:
+            line = stdout2.readline()
+            while line:
+                if line.endswith(b"\n") or line.endswith(b"\r"):
+                    line = partial + line
+                    partial = b""
+                    stdout_callback(line.rstrip())
+                else:
+                    # no more output available now, but more to come?
+                    partial = partial + line
+                line = stdout2.readline()
+            if partial:
+                stdout_callback(partial)
+            stdout2.close()
+
+        adb_process.stdout_file.seek(0, os.SEEK_SET)
+
+        return adb_process
+
+    def shell_bool(self, cmd, env=None, cwd=None, timeout=None, enable_run_as=False):
+        """Executes a shell command on the device returning True on success
+        and False on failure.
+
+        :param str cmd: The command to be executed.
+        :param dict env: Contains the environment variables and
+            their values.
+        :param str cwd: The directory from which to execute.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param bool enable_run_as: Flag used to temporarily enable use
+            of run-as to execute the command.
+        :return: bool
+        :raises: :exc:`ADBTimeoutError`
+        """
+        adb_process = None
+        try:
+            adb_process = self.shell(
+                cmd, env=env, cwd=cwd, timeout=timeout, enable_run_as=enable_run_as
+            )
+            if adb_process.timedout:
+                raise ADBTimeoutError("%s" % adb_process)
+            return adb_process.exitcode == 0
+        finally:
+            if adb_process:
+                if self._verbose:
+                    output = adb_process.stdout
+                    self._logger.debug(
+                        "shell_bool: %s, "
+                        "timeout: %s, "
+                        "timedout: %s, "
+                        "exitcode: %s, "
+                        "output: %s"
+                        % (
+                            " ".join(adb_process.args),
+                            timeout,
+                            adb_process.timedout,
+                            adb_process.exitcode,
+                            output,
+                        )
+                    )
+
+                adb_process.stdout_file.close()
+
+    def shell_output(self, cmd, env=None, cwd=None, timeout=None, enable_run_as=False):
+        """Executes an adb shell on the device returning stdout.
+
+        :param str cmd: The command to be executed.
+        :param dict env: Contains the environment variables and their values.
+        :param str cwd: The directory from which to execute.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per
+            adb call. The total time spent may exceed this
+            value. If it is not specified, the value set
+            in the ADBDevice constructor is used.
+        :param bool enable_run_as: Flag used to temporarily enable use
+            of run-as to execute the command.
+        :return: str - content of stdout.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        adb_process = None
+        try:
+            adb_process = self.shell(
+                cmd, env=env, cwd=cwd, timeout=timeout, enable_run_as=enable_run_as
+            )
+            if adb_process.timedout:
+                raise ADBTimeoutError("%s" % adb_process)
+            if adb_process.exitcode:
+                raise ADBProcessError(adb_process)
+            output = adb_process.stdout
+            if self._verbose:
+                self._logger.debug(
+                    "shell_output: %s, "
+                    "timeout: %s, "
+                    "timedout: %s, "
+                    "exitcode: %s, "
+                    "output: %s"
+                    % (
+                        " ".join(adb_process.args),
+                        timeout,
+                        adb_process.timedout,
+                        adb_process.exitcode,
+                        output,
+                    )
+                )
+
+            return output
+        finally:
+            if adb_process and isinstance(adb_process.stdout_file, io.IOBase):
+                adb_process.stdout_file.close()
+
+    # Informational methods
+
+    def _get_logcat_buffer_args(self, buffers):
+        valid_buffers = set(["radio", "main", "events"])
+        invalid_buffers = set(buffers).difference(valid_buffers)
+        if invalid_buffers:
+            raise ADBError(
+                "Invalid logcat buffers %s not in %s "
+                % (list(invalid_buffers), list(valid_buffers))
+            )
+        args = []
+        for b in buffers:
+            args.extend(["-b", b])
+        return args
+
+    def clear_logcat(self, timeout=None, buffers=[]):
+        """Clears logcat via adb logcat -c.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per
+            adb call. The total time spent may exceed this
+            value. If it is not specified, the value set
+            in the ADBDevice constructor is used.
+        :param list buffers: Log buffers to clear. Valid buffers are
+            "radio", "events", and "main". Defaults to "main".
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        buffers = self._get_logcat_buffer_args(buffers)
+        cmds = ["logcat", "-c"] + buffers
+        try:
+            self.command_output(cmds, timeout=timeout)
+            self.shell_output("log logcat cleared", timeout=timeout)
+        except ADBTimeoutError:
+            raise
+        except ADBProcessError as e:
+            if "failed to clear" not in str(e):
+                raise
+            self._logger.warning(
+                "retryable logcat clear error?: {}. Retrying...".format(str(e))
+            )
+            try:
+                self.command_output(cmds, timeout=timeout)
+                self.shell_output("log logcat cleared", timeout=timeout)
+            except ADBProcessError as e2:
+                if "failed to clear" not in str(e):
+                    raise
+                self._logger.warning(
+                    "Ignoring failure to clear logcat: {}.".format(str(e2))
+                )
+
+    def get_logcat(
+        self,
+        filter_specs=[
+            "dalvikvm:I",
+            "ConnectivityService:S",
+            "WifiMonitor:S",
+            "WifiStateTracker:S",
+            "wpa_supplicant:S",
+            "NetworkStateTracker:S",
+            "EmulatedCamera_Camera:S",
+            "EmulatedCamera_Device:S",
+            "EmulatedCamera_FakeCamera:S",
+            "EmulatedCamera_FakeDevice:S",
+            "EmulatedCamera_CallbackNotifier:S",
+            "GnssLocationProvider:S",
+            "Hyphenator:S",
+            "BatteryStats:S",
+        ],
+        format="time",
+        filter_out_regexps=[],
+        timeout=None,
+        buffers=[],
+    ):
+        """Returns the contents of the logcat file as a list of strings.
+
+        :param list filter_specs: Optional logcat messages to
+            be included.
+        :param str format: Optional logcat format.
+        :param list filter_out_regexps: Optional logcat messages to be
+            excluded.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param list buffers: Log buffers to retrieve. Valid buffers are
+            "radio", "events", and "main". Defaults to "main".
+        :return: list of lines logcat output.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        buffers = self._get_logcat_buffer_args(buffers)
+        cmds = ["logcat", "-v", format, "-d"] + buffers + filter_specs
+        lines = self.command_output(cmds, timeout=timeout).splitlines()
+
+        for regex in filter_out_regexps:
+            lines = [line for line in lines if not re.search(regex, line)]
+
+        return lines
+
+    def get_prop(self, prop, timeout=None):
+        """Gets value of a property from the device via adb shell getprop.
+
+        :param str prop: The propery name.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: str value of property.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        output = self.shell_output("getprop %s" % prop, timeout=timeout)
+        return output
+
+    def get_state(self, timeout=None):
+        """Returns the device's state via adb get-state.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: str value of adb get-state.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        output = self.command_output(["get-state"], timeout=timeout).strip()
+        return output
+
+    def get_ip_address(self, interfaces=None, timeout=None):
+        """Returns the device's ip address, or None if it doesn't have one
+
+        :param list interfaces: Interfaces to allow, or None to allow any
+            non-loopback interface.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: str ip address of the device or None if it could not
+            be found.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if not self.is_rooted:
+            self._logger.warning("Device not rooted. Can not obtain ip address.")
+            return None
+        self._logger.debug("get_ip_address: interfaces: %s" % interfaces)
+        if not interfaces:
+            interfaces = ["wlan0", "eth0"]
+            wifi_interface = self.get_prop("wifi.interface", timeout=timeout)
+            self._logger.debug("get_ip_address: wifi_interface: %s" % wifi_interface)
+            if wifi_interface and wifi_interface not in interfaces:
+                interfaces = interfaces.append(wifi_interface)
+
+        # ifconfig interface
+        # can return two different formats:
+        # eth0: ip 192.168.1.139 mask 255.255.255.0 flags [up broadcast running multicast]
+        # or
+        # wlan0     Link encap:Ethernet  HWaddr 00:9A:CD:B8:39:65
+        # inet addr:192.168.1.38  Bcast:192.168.1.255  Mask:255.255.255.0
+        # inet6 addr: fe80::29a:cdff:feb8:3965/64 Scope: Link
+        # UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+        # RX packets:180 errors:0 dropped:0 overruns:0 frame:0
+        # TX packets:218 errors:0 dropped:0 overruns:0 carrier:0
+        # collisions:0 txqueuelen:1000
+        # RX bytes:84577 TX bytes:31202
+
+        re1_ip = re.compile(r"(\w+): ip ([0-9.]+) mask.*")
+        # re1_ip will match output of the first format
+        # with group 1 returning the interface and group 2 returing the ip address.
+
+        # re2_interface will match the interface line in the second format
+        # while re2_ip will match the inet addr line of the second format.
+        re2_interface = re.compile(r"(\w+)\s+Link")
+        re2_ip = re.compile(r"\s+inet addr:([0-9.]+)")
+
+        matched_interface = None
+        matched_ip = None
+        re_bad_addr = re.compile(r"127.0.0.1|0.0.0.0")
+
+        self._logger.debug("get_ip_address: ifconfig")
+        for interface in interfaces:
+            try:
+                output = self.shell_output("ifconfig %s" % interface, timeout=timeout)
+            except ADBError as e:
+                self._logger.warning(
+                    "get_ip_address ifconfig %s: %s" % (interface, str(e))
+                )
+                output = ""
+
+            for line in output.splitlines():
+                if not matched_interface:
+                    match = re1_ip.match(line)
+                    if match:
+                        matched_interface, matched_ip = match.groups()
+                    else:
+                        match = re2_interface.match(line)
+                        if match:
+                            matched_interface = match.group(1)
+                else:
+                    match = re2_ip.match(line)
+                    if match:
+                        matched_ip = match.group(1)
+
+                if matched_ip:
+                    if not re_bad_addr.match(matched_ip):
+                        self._logger.debug(
+                            "get_ip_address: found: %s %s"
+                            % (matched_interface, matched_ip)
+                        )
+                        return matched_ip
+                    matched_interface = None
+                    matched_ip = None
+
+        self._logger.debug("get_ip_address: netcfg")
+        # Fall back on netcfg if ifconfig does not work.
+        # $ adb shell netcfg
+        # lo       UP   127.0.0.1/8       0x00000049 00:00:00:00:00:00
+        # dummy0   DOWN   0.0.0.0/0       0x00000082 8e:cd:67:48:b7:c2
+        # rmnet0   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet1   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet2   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet3   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet4   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet5   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet6   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # rmnet7   DOWN   0.0.0.0/0       0x00000000 00:00:00:00:00:00
+        # sit0     DOWN   0.0.0.0/0       0x00000080 00:00:00:00:00:00
+        # vip0     DOWN   0.0.0.0/0       0x00001012 00:01:00:00:00:01
+        # wlan0    UP   192.168.1.157/24  0x00001043 38:aa:3c:1c:f6:94
+
+        re3_netcfg = re.compile(
+            r"(\w+)\s+UP\s+([1-9]\d{0,2}\.\d{1,3}\.\d{1,3}\.\d{1,3})"
+        )
+        try:
+            output = self.shell_output("netcfg", timeout=timeout)
+        except ADBError as e:
+            self._logger.warning("get_ip_address netcfg: %s" % str(e))
+            output = ""
+        for line in output.splitlines():
+            match = re3_netcfg.search(line)
+            if match:
+                matched_interface, matched_ip = match.groups()
+                if matched_interface == "lo" or re_bad_addr.match(matched_ip):
+                    matched_interface = None
+                    matched_ip = None
+                elif matched_ip and matched_interface in interfaces:
+                    self._logger.debug(
+                        "get_ip_address: found: %s %s" % (matched_interface, matched_ip)
+                    )
+                    return matched_ip
+        self._logger.debug("get_ip_address: not found")
+        return matched_ip
+
+    # File management methods
+
+    def remount(self, timeout=None):
+        """Remount /system/ in read/write mode
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+
+        rv = self.command_output(["remount"], timeout=timeout)
+        if "remount succeeded" not in rv:
+            raise ADBError("Unable to remount device")
+
+    def batch_execute(self, commands, timeout=None, enable_run_as=False):
+        """Writes commands to a temporary file then executes on the device.
+
+        :param list commands_list: List of commands to be run by the shell.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param bool enable_run_as: Flag used to temporarily enable use
+            of run-as to execute the command.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        try:
+            tmpf = tempfile.NamedTemporaryFile(mode="w", delete=False)
+            tmpf.write("\n".join(commands))
+            tmpf.close()
+            script = "/sdcard/{}".format(os.path.basename(tmpf.name))
+            self.push(tmpf.name, script)
+            self.shell_output(
+                "sh {}".format(script), enable_run_as=enable_run_as, timeout=timeout
+            )
+        finally:
+            if tmpf:
+                os.unlink(tmpf.name)
+            if script:
+                self.rm(script, timeout=timeout)
+
+    def chmod(self, path, recursive=False, mask="777", timeout=None):
+        """Recursively changes the permissions of a directory on the
+        device.
+
+        :param str path: The directory name on the device.
+        :param bool recursive: Flag specifying if the command should be
+            executed recursively.
+        :param str mask: The octal permissions.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        # Note that on some tests such as webappstartup, an error
+        # occurs during recursive calls to chmod where a "No such file
+        # or directory" error will occur for the
+        # /data/data/org.mozilla.fennec/files/mozilla/*.webapp0/lock
+        # which is a symbolic link to a socket: lock ->
+        # 127.0.0.1:+<port>.  On Linux, chmod -R ignores symbolic
+        # links but it appear Android's version does not. We ignore
+        # this type of error, but pass on any other errors that are
+        # detected.
+        path = posixpath.normpath(path.strip())
+        enable_run_as = self.enable_run_as_for_path(path)
+        self._logger.debug(
+            "chmod: path=%s, recursive=%s, mask=%s" % (path, recursive, mask)
+        )
+        if self.is_path_internal_storage(path, timeout=timeout):
+            # External storage on Android is case-insensitive and permissionless
+            # therefore even with the proper privileges it is not possible
+            # to change modes.
+            self._logger.debug("Ignoring attempt to chmod external storage")
+            return
+
+        # build up the command to be run based on capabilities.
+        command = ["chmod"]
+
+        if recursive and self._chmod_R:
+            command.append("-R")
+
+        command.append(mask)
+
+        if recursive and not self._chmod_R:
+            paths = self.ls(path, recursive=True, timeout=timeout)
+            base = " ".join(command)
+            commands = [" ".join([base, entry]) for entry in paths]
+            self.batch_execute(commands, timeout=timeout, enable_run_as=enable_run_as)
+        else:
+            command.append(path)
+            try:
+                self.shell_output(
+                    cmd=" ".join(command), timeout=timeout, enable_run_as=enable_run_as
+                )
+            except ADBProcessError as e:
+                if "No such file or directory" not in str(e):
+                    # It appears that chmod -R with symbolic links will exit with
+                    # exit code 1 but the files apart from the symbolic links
+                    # were transfered.
+                    raise
+
+    def chown(self, path, owner, group=None, recursive=False, timeout=None):
+        """Run the chown command on the provided path.
+
+        :param str path: path name on the device.
+        :param str owner: new owner of the path.
+        :param str group: optional parameter specifying the new group the path
+                      should belong to.
+        :param bool recursive: optional value specifying whether the command should
+                    operate on files and directories recursively.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before throwing
+            an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        path = posixpath.normpath(path.strip())
+        enable_run_as = self.enable_run_as_for_path(path)
+        if self.is_path_internal_storage(path, timeout=timeout):
+            self._logger.warning("Ignoring attempt to chown external storage")
+            return
+
+        # build up the command to be run based on capabilities.
+        command = ["chown"]
+
+        if recursive and self._chown_R:
+            command.append("-R")
+
+        if group:
+            # officially supported notation is : but . has been checked with
+            # sdk 17 and it works.
+            command.append("{owner}.{group}".format(owner=owner, group=group))
+        else:
+            command.append(owner)
+
+        if recursive and not self._chown_R:
+            # recursive desired, but chown -R is not supported natively.
+            # like with chmod, get the list of subpaths, put them into a script
+            # then run it with adb with one call.
+            paths = self.ls(path, recursive=True, timeout=timeout)
+            base = " ".join(command)
+            commands = [" ".join([base, entry]) for entry in paths]
+
+            self.batch_execute(commands, timeout=timeout, enable_run_as=enable_run_as)
+        else:
+            # recursive or not, and chown -R is supported natively.
+            # command can simply be run as provided by the user.
+            command.append(path)
+            self.shell_output(
+                cmd=" ".join(command), timeout=timeout, enable_run_as=enable_run_as
+            )
+
+    def _test_path(self, argument, path, timeout=None):
+        """Performs path and file type checking.
+
+        :param str argument: Command line argument to the test command.
+        :param str path: The path or filename on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param bool root: Flag specifying if the command should be
+            executed as root.
+        :return: boolean - True if path or filename fulfills the
+            condition of the test.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        enable_run_as = self.enable_run_as_for_path(path)
+        if not enable_run_as and not self._device_serial.startswith("emulator"):
+            return self.shell_bool(
+                "test -{arg} {path}".format(arg=argument, path=path),
+                timeout=timeout,
+                enable_run_as=False,
+            )
+        # Bug 1572563 - work around intermittent test path failures on emulators.
+        # The shell built-in test is not supported via run-as.
+        if argument == "f":
+            return self.exists(path, timeout=timeout) and not self.is_dir(
+                path, timeout=timeout
+            )
+        if argument == "d":
+            return self.shell_bool(
+                "ls -a {}/".format(path), timeout=timeout, enable_run_as=enable_run_as
+            )
+        if argument == "e":
+            return self.shell_bool(
+                "ls -a {}".format(path), timeout=timeout, enable_run_as=enable_run_as
+            )
+        raise ADBError("_test_path: Unknown argument %s" % argument)
+
+    def exists(self, path, timeout=None):
+        """Returns True if the path exists on the device.
+
+        :param str path: The path name on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param bool root: Flag specifying if the command should be
+            executed as root.
+        :return: boolean - True if path exists.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        path = posixpath.normpath(path)
+        return self._test_path("e", path, timeout=timeout)
+
+    def is_dir(self, path, timeout=None):
+        """Returns True if path is an existing directory on the device.
+
+        :param str path: The directory on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: boolean - True if path exists on the device and is a
+            directory.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        path = posixpath.normpath(path)
+        return self._test_path("d", path, timeout=timeout)
+
+    def is_file(self, path, timeout=None):
+        """Returns True if path is an existing file on the device.
+
+        :param str path: The file name on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: boolean - True if path exists on the device and is a
+            file.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        path = posixpath.normpath(path)
+        return self._test_path("f", path, timeout=timeout)
+
+    def list_files(self, path, timeout=None):
+        """Return a list of files/directories contained in a directory
+        on the device.
+
+        :param str path: The directory name on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: list of files/directories contained in the directory.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        path = posixpath.normpath(path.strip())
+        enable_run_as = self.enable_run_as_for_path(path)
+        data = []
+        if self.is_dir(path, timeout=timeout):
+            try:
+                data = self.shell_output(
+                    "%s %s" % (self._ls, path),
+                    timeout=timeout,
+                    enable_run_as=enable_run_as,
+                ).splitlines()
+                self._logger.debug("list_files: data: %s" % data)
+            except ADBError:
+                self._logger.error(
+                    "Ignoring exception in ADBDevice.list_files\n%s"
+                    % traceback.format_exc()
+                )
+        data[:] = [item for item in data if item]
+        self._logger.debug("list_files: %s" % data)
+        return data
+
+    def ls(self, path, recursive=False, timeout=None):
+        """Return a list of matching files/directories on the device.
+
+        The ls method emulates the behavior of the ls shell command.
+        It differs from the list_files method by supporting wild cards
+        and returning matches even if the path is not a directory and
+        by allowing a recursive listing.
+
+        ls /sdcard always returns /sdcard and not the contents of the
+        sdcard path. The ls method makes the behavior consistent with
+        others paths by adjusting /sdcard to /sdcard/. Note this is
+        also the case of other sdcard related paths such as
+        /storage/emulated/legacy but no adjustment is made in those
+        cases.
+
+        The ls method works around a Nexus 4 bug which prevents
+        recursive listing of directories on the sdcard unless the path
+        ends with "/*" by adjusting sdcard paths ending in "/" to end
+        with "/*". This adjustment is only made on official Nexus 4
+        builds with property ro.product.model "Nexus 4". Note that
+        this will fail to return any "hidden" files or directories
+        which begin with ".".
+
+        :param str path: The directory name on the device.
+        :param bool recursive: Flag specifying if a recursive listing
+            is to be returned. If recursive is False, the returned
+            matches will be relative to the path. If recursive is True,
+            the returned matches will be absolute paths.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: list of files/directories contained in the directory.
+        :raises: :exc:`ADBTimeoutError`
+        """
+        path = posixpath.normpath(path.strip())
+        enable_run_as = self.enable_run_as_for_path(path)
+        parent = ""
+        entries = {}
+
+        if path == "/sdcard":
+            path += "/"
+
+        # Android 2.3 and later all appear to support ls -R however
+        # Nexus 4 does not perform a recursive search on the sdcard
+        # unless the path is a directory with * wild card.
+        if not recursive:
+            recursive_flag = ""
+        else:
+            recursive_flag = "-R"
+            if path.startswith("/sdcard") and path.endswith("/"):
+                model = self.get_prop("ro.product.model", timeout=timeout)
+                if model == "Nexus 4":
+                    path += "*"
+        lines = self.shell_output(
+            "%s %s %s" % (self._ls, recursive_flag, path),
+            timeout=timeout,
+            enable_run_as=enable_run_as,
+        ).splitlines()
+        for line in lines:
+            line = line.strip()
+            if not line:
+                parent = ""
+                continue
+            if line.endswith(":"):  # This is a directory
+                parent = line.replace(":", "/")
+                entry = parent
+                # Remove earlier entry which is marked as a file.
+                if parent[:-1] in entries:
+                    del entries[parent[:-1]]
+            elif parent:
+                entry = "%s%s" % (parent, line)
+            else:
+                entry = line
+            entries[entry] = 1
+        entry_list = list(entries.keys())
+        entry_list.sort()
+        return entry_list
+
+    def mkdir(self, path, parents=False, timeout=None):
+        """Create a directory on the device.
+
+        :param str path: The directory name on the device
+            to be created.
+        :param bool parents: Flag indicating if the parent directories are
+            also to be created. Think mkdir -p path.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+
+        def verify_mkdir(path):
+            # Verify that the directory was actually created. On some devices
+            # (x86_64 emulator, v 29.0.11) the directory is sometimes not
+            # immediately visible, so retries are allowed.
+            retry = 0
+            while retry < 10:
+                if self.is_dir(path, timeout=timeout):
+                    return True
+                time.sleep(1)
+                retry += 1
+            return False
+
+        self._sync(timeout=timeout)
+
+        path = posixpath.normpath(path)
+        enable_run_as = self.enable_run_as_for_path(path)
+        if parents:
+            if self._mkdir_p is None or self._mkdir_p:
+                # Use shell_bool to catch the possible
+                # non-zero exitcode if -p is not supported.
+                if self.shell_bool(
+                    "mkdir -p %s" % path, timeout=timeout, enable_run_as=enable_run_as
+                ) or verify_mkdir(path):
+                    self.chmod(path, recursive=True, timeout=timeout)
+                    self._mkdir_p = True
+                    self._sync(timeout=timeout)
+                    return
+            # mkdir -p is not supported. create the parent
+            # directories individually.
+            if not self.is_dir(posixpath.dirname(path)):
+                parts = path.split("/")
+                name = "/"
+                for part in parts[:-1]:
+                    if part != "":
+                        name = posixpath.join(name, part)
+                        if not self.is_dir(name):
+                            # Use shell_output to allow any non-zero
+                            # exitcode to raise an ADBError.
+                            self.shell_output(
+                                "mkdir %s" % name,
+                                timeout=timeout,
+                                enable_run_as=enable_run_as,
+                            )
+                            self.chmod(name, recursive=True, timeout=timeout)
+                            self._sync(timeout=timeout)
+
+        # If parents is True and the directory does exist, we don't
+        # need to do anything. Otherwise we call mkdir. If the
+        # directory already exists or if it is a file instead of a
+        # directory, mkdir will fail and we will raise an ADBError.
+        if not parents or not self.is_dir(path):
+            self.shell_output(
+                "mkdir %s" % path, timeout=timeout, enable_run_as=enable_run_as
+            )
+            self._sync(timeout=timeout)
+            self.chmod(path, recursive=True, timeout=timeout)
+        if not verify_mkdir(path):
+            raise ADBError("mkdir %s Failed" % path)
+
+    def push(self, local, remote, timeout=None):
+        """Pushes a file or directory to the device.
+
+        :param str local: The name of the local file or
+            directory name.
+        :param str remote: The name of the remote file or
+            directory name.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self._sync(timeout=timeout)
+
+        # remove trailing /
+        local = os.path.normpath(local)
+        remote = posixpath.normpath(remote)
+        copy_required = False
+        sdcard_remote = None
+        if os.path.isfile(local) and self.is_dir(remote):
+            # force push to use the correct filename in the remote directory
+            remote = posixpath.join(remote, os.path.basename(local))
+        elif os.path.isdir(local):
+            copy_required = True
+            temp_parent = tempfile.mkdtemp()
+            remote_name = os.path.basename(remote)
+            new_local = os.path.join(temp_parent, remote_name)
+            dir_util.copy_tree(local, new_local)
+            local = new_local
+            # See do_sync_push in
+            # https://android.googlesource.com/platform/system/core/+/master/adb/file_sync_client.cpp
+            # Work around change in behavior in adb 1.0.36 where if
+            # the remote destination directory exists, adb push will
+            # copy the source directory *into* the destination
+            # directory otherwise it will copy the source directory
+            # *onto* the destination directory.
+            if self.is_dir(remote):
+                remote = "/".join(remote.rstrip("/").split("/")[:-1])
+        try:
+            if not self._run_as_package:
+                self.command_output(["push", local, remote], timeout=timeout)
+                self.chmod(remote, recursive=True, timeout=timeout)
+            else:
+                # When using run-as to work around the lack of root on a
+                # device, we can not push directly to the app's
+                # internal storage since the shell user under which
+                # the push runs does not have permission to write to
+                # the app's directory. Instead, we use a two stage
+                # operation where we first push to a temporary
+                # intermediate location under /data/local/tmp which
+                # should be writable by the shell user, then using
+                # run-as, copy the data into the app's internal
+                # storage.
+                try:
+                    with tempfile.NamedTemporaryFile(delete=True) as tmpf:
+                        intermediate = posixpath.join(
+                            "/data/local/tmp", os.path.basename(tmpf.name)
+                        )
+                    self.command_output(["push", local, intermediate], timeout=timeout)
+                    self.chmod(intermediate, recursive=True, timeout=timeout)
+                    parent_dir = posixpath.dirname(remote)
+                    if not self.is_dir(parent_dir, timeout=timeout):
+                        self.mkdir(parent_dir, parents=True, timeout=timeout)
+                    self.cp(intermediate, remote, recursive=True, timeout=timeout)
+                finally:
+                    self.rm(intermediate, recursive=True, force=True, timeout=timeout)
+        except ADBProcessError as e:
+            if "remote secure_mkdirs failed" not in str(e):
+                raise
+            self._logger.warning(
+                "remote secure_mkdirs failed push('{}', '{}') {}".format(
+                    local, remote, str(e)
+                )
+            )
+            # Work around change in Android where push creates
+            # directories which can not be written by "other" by first
+            # pushing the source to the sdcard which has no
+            # permissions issues, then moving it from the sdcard to
+            # the final destination.
+            self._logger.info("Falling back to using intermediate /sdcard in push.")
+            self.mkdir(posixpath.dirname(remote), parents=True, timeout=timeout)
+            with tempfile.NamedTemporaryFile(delete=True) as tmpf:
+                sdcard_remote = posixpath.join("/sdcard", os.path.basename(tmpf.name))
+            self.command_output(["push", local, sdcard_remote], timeout=timeout)
+            self.cp(sdcard_remote, remote, recursive=True, timeout=timeout)
+        except BaseException:
+            raise
+        finally:
+            self._sync(timeout=timeout)
+            if copy_required:
+                shutil.rmtree(temp_parent)
+            if sdcard_remote:
+                self.rm(sdcard_remote, recursive=True, force=True, timeout=timeout)
+
+    def pull(self, remote, local, timeout=None):
+        """Pulls a file or directory from the device.
+
+        :param str remote: The path of the remote file or
+            directory.
+        :param str local: The path of the local file or
+            directory name.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self._sync(timeout=timeout)
+
+        # remove trailing /
+        local = os.path.normpath(local)
+        remote = posixpath.normpath(remote)
+        copy_required = False
+        original_local = local
+        if os.path.isdir(local) and self.is_dir(remote):
+            # See do_sync_pull in
+            # https://android.googlesource.com/platform/system/core/+/master/adb/file_sync_client.cpp
+            # Work around change in behavior in adb 1.0.36 where if
+            # the local destination directory exists, adb pull will
+            # copy the source directory *into* the destination
+            # directory otherwise it will copy the source directory
+            # *onto* the destination directory.
+            #
+            # If the destination directory does exist, pull to its
+            # parent directory. If the source and destination leaf
+            # directory names are different, pull the source directory
+            # into a temporary directory and then copy the temporary
+            # directory onto the destination.
+            local_name = os.path.basename(local)
+            remote_name = os.path.basename(remote)
+            if local_name != remote_name:
+                copy_required = True
+                temp_parent = tempfile.mkdtemp()
+                local = os.path.join(temp_parent, remote_name)
+            else:
+                local = "/".join(local.rstrip("/").split("/")[:-1])
+        try:
+            if not self._run_as_package:
+                # We must first make the remote directory readable.
+                self.chmod(remote, recursive=True, timeout=timeout)
+                self.command_output(["pull", remote, local], timeout=timeout)
+            else:
+                # When using run-as to work around the lack of root on
+                # a device, we can not pull directly from the apps
+                # internal storage since the shell user under which
+                # the pull runs does not have permission to read from
+                # the app's directory. Instead, we use a two stage
+                # operation where we first use run-as to copy the data
+                # from the app's internal storage to a temporary
+                # intermediate location under /data/local/tmp which
+                # should be writable by the shell user, then using
+                # pull, to copy the data off of the device.
+                try:
+                    with tempfile.NamedTemporaryFile(delete=True) as tmpf:
+                        intermediate = posixpath.join(
+                            "/data/local/tmp", os.path.basename(tmpf.name)
+                        )
+                    # When using run-as <app>, we must first use the
+                    # shell to create the intermediate and chmod it
+                    # before the app will be able to access it.
+                    if self.is_dir(remote, timeout=timeout):
+                        self.mkdir(
+                            posixpath.join(intermediate, remote_name),
+                            parents=True,
+                            timeout=timeout,
+                        )
+                    else:
+                        self.shell_output("echo > %s" % intermediate, timeout=timeout)
+                        self.chmod(intermediate, timeout=timeout)
+                    self.cp(remote, intermediate, recursive=True, timeout=timeout)
+                    self.command_output(["pull", intermediate, local], timeout=timeout)
+                except ADBError as e:
+                    self._logger.error("pull %s %s: %s" % (intermediate, local, str(e)))
+                finally:
+                    self.rm(intermediate, recursive=True, force=True, timeout=timeout)
+        finally:
+            if copy_required:
+                dir_util.copy_tree(local, original_local)
+                shutil.rmtree(temp_parent)
+
+    def get_file(self, remote, offset=None, length=None, timeout=None):
+        """Pull file from device and return the file's content
+
+        :param str remote: The path of the remote file.
+        :param offset: If specified, return only content beyond this offset.
+        :param length: If specified, limit content length accordingly.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        self._sync(timeout=timeout)
+
+        with tempfile.NamedTemporaryFile() as tf:
+            self.pull(remote, tf.name, timeout=timeout)
+            with io.open(tf.name, mode="rb") as tf2:
+                # ADB pull does not support offset and length, but we can
+                # instead read only the requested portion of the local file
+                if offset is not None and length is not None:
+                    tf2.seek(offset)
+                    return tf2.read(length)
+                if offset is not None:
+                    tf2.seek(offset)
+                    return tf2.read()
+                return tf2.read()
+
+    def rm(self, path, recursive=False, force=False, timeout=None):
+        """Delete files or directories on the device.
+
+        :param str path: The path of the remote file or directory.
+        :param bool recursive: Flag specifying if the command is
+            to be applied recursively to the target. Default is False.
+        :param bool force: Flag which if True will not raise an
+            error when attempting to delete a non-existent file. Default
+            is False.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        path = posixpath.normpath(path)
+        enable_run_as = self.enable_run_as_for_path(path)
+        self._sync(timeout=timeout)
+
+        cmd = "rm"
+        if recursive:
+            cmd += " -r"
+        try:
+            self.shell_output(
+                "%s %s" % (cmd, path), timeout=timeout, enable_run_as=enable_run_as
+            )
+            self._sync(timeout=timeout)
+            if self.exists(path, timeout=timeout):
+                raise ADBError('rm("%s") failed to remove path.' % path)
+        except ADBError as e:
+            if not force and "No such file or directory" in str(e):
+                raise
+            if "Directory not empty" in str(e):
+                raise
+            if self._verbose and "No such file or directory" not in str(e):
+                self._logger.error(
+                    "rm %s recursive=%s force=%s timeout=%s enable_run_as=%s: %s"
+                    % (path, recursive, force, timeout, enable_run_as, str(e))
+                )
+
+    def rmdir(self, path, timeout=None):
+        """Delete empty directory on the device.
+
+        :param str path: The directory name on the device.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        path = posixpath.normpath(path)
+        enable_run_as = self.enable_run_as_for_path(path)
+        self.shell_output(
+            "rmdir %s" % path, timeout=timeout, enable_run_as=enable_run_as
+        )
+        self._sync(timeout=timeout)
+        if self.is_dir(path, timeout=timeout):
+            raise ADBError('rmdir("%s") failed to remove directory.' % path)
+
+    # Process management methods
+
+    def get_process_list(self, timeout=None):
+        """Returns list of tuples (pid, name, user) for running
+        processes on device.
+
+        :param int timeout: The maximum time
+            in seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified,
+            the value set in the ADBDevice constructor is used.
+        :return: list of (pid, name, user) tuples for running processes
+            on the device.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        adb_process = None
+        max_attempts = 2
+        try:
+            for attempt in range(1, max_attempts + 1):
+                adb_process = self.shell("ps", timeout=timeout)
+                if adb_process.timedout:
+                    raise ADBTimeoutError("%s" % adb_process)
+                if adb_process.exitcode:
+                    raise ADBProcessError(adb_process)
+                # first line is the headers
+                header = six.ensure_str(adb_process.stdout_file.readline())
+                pid_i = -1
+                user_i = -1
+                els = header.split()
+                for i in range(len(els)):
+                    item = els[i].lower()
+                    if item == "user":
+                        user_i = i
+                    elif item == "pid":
+                        pid_i = i
+                if user_i != -1 and pid_i != -1:
+                    break
+                # if this isn't the final attempt, don't print this as an error
+                if attempt < max_attempts:
+                    self._logger.info(
+                        "get_process_list: attempt: %d %s" % (attempt, header)
+                    )
+                else:
+                    raise ADBError(
+                        "get_process_list: Unknown format: %s: %s"
+                        % (header, adb_process)
+                    )
+            ret = []
+            line = six.ensure_str(adb_process.stdout_file.readline())
+            while line:
+                els = line.split()
+                try:
+                    ret.append([int(els[pid_i]), els[-1], els[user_i]])
+                except ValueError:
+                    self._logger.error(
+                        "get_process_list: %s %s\n%s"
+                        % (header, line, traceback.format_exc())
+                    )
+                    raise ADBError(
+                        "get_process_list: %s: %s: %s" % (header, line, adb_process)
+                    )
+                except IndexError:
+                    self._logger.error(
+                        "get_process_list: %s %s els %s pid_i %s user_i %s\n%s"
+                        % (header, line, els, pid_i, user_i, traceback.format_exc())
+                    )
+                    raise ADBError(
+                        "get_process_list: %s: %s els %s pid_i %s user_i %s: %s"
+                        % (header, line, els, pid_i, user_i, adb_process)
+                    )
+                line = six.ensure_str(adb_process.stdout_file.readline())
+            self._logger.debug("get_process_list: %s" % ret)
+            return ret
+        finally:
+            if adb_process and isinstance(adb_process.stdout_file, io.IOBase):
+                adb_process.stdout_file.close()
+
+    def kill(self, pids, sig=None, attempts=3, wait=5, timeout=None):
+        """Kills processes on the device given a list of process ids.
+
+        :param list pids: process ids to be killed.
+        :param int sig: signal to be sent to the process.
+        :param integer attempts: number of attempts to try to
+            kill the processes.
+        :param integer wait: number of seconds to wait after each attempt.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        pid_list = [str(pid) for pid in pids]
+        for attempt in range(attempts):
+            args = ["kill"]
+            if sig:
+                args.append("-%d" % sig)
+            args.extend(pid_list)
+            try:
+                self.shell_output(" ".join(args), timeout=timeout)
+            except ADBError as e:
+                if "No such process" not in str(e):
+                    raise
+            pid_set = set(pid_list)
+            current_pid_set = set(
+                [str(proc[0]) for proc in self.get_process_list(timeout=timeout)]
+            )
+            pid_list = list(pid_set.intersection(current_pid_set))
+            if not pid_list:
+                break
+            self._logger.debug(
+                "Attempt %d of %d to kill processes %s failed"
+                % (attempt + 1, attempts, pid_list)
+            )
+            time.sleep(wait)
+
+        if pid_list:
+            raise ADBError("kill: processes %s not killed" % pid_list)
+
+    def pkill(self, appname, sig=None, attempts=3, wait=5, timeout=None):
+        """Kills a processes on the device matching a name.
+
+        :param str appname: The app name of the process to
+            be killed. Note that only the first 75 characters of the
+            process name are significant.
+        :param int sig: optional signal to be sent to the process.
+        :param integer attempts: number of attempts to try to
+            kill the processes.
+        :param integer wait: number of seconds to wait after each attempt.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :param bool root: Flag specifying if the command should
+            be executed as root.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        pids = self.pidof(appname, timeout=timeout)
+
+        if not pids:
+            return
+
+        try:
+            self.kill(pids, sig, attempts=attempts, wait=wait, timeout=timeout)
+        except ADBError as e:
+            if self.process_exist(appname, timeout=timeout):
+                raise e
+
+    def process_exist(self, process_name, timeout=None):
+        """Returns True if process with name process_name is running on
+        device.
+
+        :param str process_name: The name of the process
+            to check. Note that only the first 75 characters of the
+            process name are significant.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: boolean - True if process exists.
+
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if not isinstance(process_name, six.string_types):
+            raise ADBError("Process name %s is not a string" % process_name)
+
+        # Filter out extra spaces.
+        parts = [x for x in process_name.split(" ") if x != ""]
+        process_name = " ".join(parts)
+
+        # Filter out the quoted env string if it exists
+        # ex: '"name=value;name2=value2;etc=..." process args' -> 'process args'
+        parts = process_name.split('"')
+        if len(parts) > 2:
+            process_name = " ".join(parts[2:]).strip()
+
+        pieces = process_name.split(" ")
+        parts = pieces[0].split("/")
+        app = parts[-1]
+
+        if self.pidof(app, timeout=timeout):
+            return True
+        return False
+
+    def cp(self, source, destination, recursive=False, timeout=None):
+        """Copies a file or directory on the device.
+
+        :param source: string containing the path of the source file or
+            directory.
+        :param destination: string containing the path of the destination file
+            or directory.
+        :param recursive: optional boolean indicating if a recursive copy is to
+            be performed. Required if the source is a directory. Defaults to
+            False. Think cp -R source destination.
+        :param int timeout: optional integer specifying the maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        source = posixpath.normpath(source)
+        destination = posixpath.normpath(destination)
+        enable_run_as = self.enable_run_as_for_path(
+            source
+        ) or self.enable_run_as_for_path(destination)
+        if self._have_cp:
+            r = "-R" if recursive else ""
+            self.shell_output(
+                "cp %s %s %s" % (r, source, destination),
+                timeout=timeout,
+                enable_run_as=enable_run_as,
+            )
+            self.chmod(destination, recursive=recursive, timeout=timeout)
+            self._sync(timeout=timeout)
+            return
+
+        # Emulate cp behavior depending on if source and destination
+        # already exists and whether they are a directory or file.
+        if not self.exists(source, timeout=timeout):
+            raise ADBError("cp: can't stat '%s': No such file or directory" % source)
+
+        if self.is_file(source, timeout=timeout):
+            if self.is_dir(destination, timeout=timeout):
+                # Copy the source file into the destination directory
+                destination = posixpath.join(destination, os.path.basename(source))
+            self.shell_output("dd if=%s of=%s" % (source, destination), timeout=timeout)
+            self.chmod(destination, recursive=recursive, timeout=timeout)
+            self._sync(timeout=timeout)
+            return
+
+        if self.is_file(destination, timeout=timeout):
+            raise ADBError("cp: %s: Not a directory" % destination)
+
+        if not recursive:
+            raise ADBError("cp: omitting directory '%s'" % source)
+
+        if self.is_dir(destination, timeout=timeout):
+            # Copy the source directory into the destination directory.
+            destination_dir = posixpath.join(destination, os.path.basename(source))
+        else:
+            # Copy the contents of the source directory into the
+            # destination directory.
+            destination_dir = destination
+
+        try:
+            # Do not create parent directories since cp does not.
+            self.mkdir(destination_dir, timeout=timeout)
+        except ADBError as e:
+            if "File exists" not in str(e):
+                raise
+
+        for i in self.list_files(source, timeout=timeout):
+            self.cp(
+                posixpath.join(source, i),
+                posixpath.join(destination_dir, i),
+                recursive=recursive,
+                timeout=timeout,
+            )
+        self.chmod(destination_dir, recursive=True, timeout=timeout)
+
+    def mv(self, source, destination, timeout=None):
+        """Moves a file or directory on the device.
+
+        :param source: string containing the path of the source file or
+            directory.
+        :param destination: string containing the path of the destination file
+            or directory.
+        :param int timeout: optional integer specifying the maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        source = posixpath.normpath(source)
+        destination = posixpath.normpath(destination)
+        enable_run_as = self.enable_run_as_for_path(
+            source
+        ) or self.enable_run_as_for_path(destination)
+        self.shell_output(
+            "mv %s %s" % (source, destination),
+            timeout=timeout,
+            enable_run_as=enable_run_as,
+        )
+
+    def reboot(self, timeout=None):
+        """Reboots the device.
+
+        :param int timeout: optional integer specifying the maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+
+        reboot() reboots the device, issues an adb wait-for-device in order to
+        wait for the device to complete rebooting, then calls is_device_ready()
+        to determine if the device has completed booting.
+
+        If the device supports running adbd as root, adbd will be
+        restarted running as root. Then, if the device supports
+        SELinux, setenforce Permissive will be called to change
+        SELinux to permissive. This must be done after adbd is
+        restarted in order for the SELinux Permissive setting to
+        persist.
+
+        """
+        self.command_output(["reboot"], timeout=timeout)
+        self._wait_for_boot_completed(timeout=timeout)
+        return self.is_device_ready(timeout=timeout)
+
+    def get_sysinfo(self, timeout=None):
+        """
+        Returns a detailed dictionary of information strings about the device.
+
+        :param int timeout: optional integer specifying the maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+
+        :raises: :exc:`ADBTimeoutError`
+        """
+        results = {"info": self.get_info(timeout=timeout)}
+        for service in (
+            "meminfo",
+            "cpuinfo",
+            "dbinfo",
+            "procstats",
+            "usagestats",
+            "battery",
+            "batterystats",
+            "diskstats",
+        ):
+            results[service] = self.shell_output(
+                "dumpsys %s" % service, timeout=timeout
+            )
+        return results
+
+    def get_info(self, directive=None, timeout=None):
+        """
+        Returns a dictionary of information strings about the device.
+
+        :param directive: information you want to get. Options are:
+             - `battery` - battery charge as a percentage
+             - `disk` - total, free, available bytes on disk
+             - `id` - unique id of the device
+             - `os` - name of the os
+             - `process` - list of running processes (same as ps)
+             - `systime` - system time of the device
+             - `uptime` - uptime of the device
+
+            If `directive` is `None`, will return all available information
+        :param int timeout: optional integer specifying the maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        directives = ["battery", "disk", "id", "os", "process", "systime", "uptime"]
+
+        if directive in directives:
+            directives = [directive]
+
+        info = {}
+        if "battery" in directives:
+            info["battery"] = self.get_battery_percentage(timeout=timeout)
+        if "disk" in directives:
+            info["disk"] = self.shell_output(
+                "df /data /system /sdcard", timeout=timeout
+            ).splitlines()
+        if "id" in directives:
+            info["id"] = self.command_output(["get-serialno"], timeout=timeout)
+        if "os" in directives:
+            info["os"] = self.get_prop("ro.build.display.id", timeout=timeout)
+        if "process" in directives:
+            ps = self.shell_output("ps", timeout=timeout)
+            info["process"] = ps.splitlines()
+        if "systime" in directives:
+            info["systime"] = self.shell_output("date", timeout=timeout)
+        if "uptime" in directives:
+            uptime = self.shell_output("uptime", timeout=timeout)
+            if uptime:
+                m = re.match(r"up time: ((\d+) days, )*(\d{2}):(\d{2}):(\d{2})", uptime)
+                if m:
+                    uptime = "%d days %d hours %d minutes %d seconds" % tuple(
+                        [int(g or 0) for g in m.groups()[1:]]
+                    )
+                info["uptime"] = uptime
+        return info
+
+    # Properties to manage SELinux on the device:
+    # https://source.android.com/devices/tech/security/selinux/index.html
+    # setenforce [ Enforcing | Permissive | 1 | 0 ]
+    # getenforce returns either Enforcing or Permissive
+
+    @property
+    def selinux(self):
+        """Returns True if SELinux is supported, False otherwise."""
+        if self._selinux is None:
+            self._selinux = self.enforcing != ""
+        return self._selinux
+
+    @property
+    def enforcing(self):
+        try:
+            enforce = self.shell_output("getenforce")
+        except ADBError as e:
+            enforce = ""
+            self._logger.warning("Unable to get SELinux enforcing due to %s." % e)
+        return enforce
+
+    @enforcing.setter
+    def enforcing(self, value):
+        """Set SELinux mode.
+        :param str value: The new SELinux mode. Should be one of
+            Permissive, 0, Enforcing, 1 but it is not validated.
+        """
+        try:
+            self.shell_output("setenforce %s" % value)
+            self._logger.info("Setting SELinux %s" % value)
+        except ADBError as e:
+            self._logger.warning("Unable to set SELinux Permissive due to %s." % e)
+
+    # Informational methods
+
+    def get_battery_percentage(self, timeout=None):
+        """Returns the battery charge as a percentage.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: battery charge as a percentage.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        level = None
+        scale = None
+        percentage = 0
+        cmd = "dumpsys battery"
+        re_parameter = re.compile(r"\s+(\w+):\s+(\d+)")
+        lines = self.shell_output(cmd, timeout=timeout).splitlines()
+        for line in lines:
+            match = re_parameter.match(line)
+            if match:
+                parameter = match.group(1)
+                value = match.group(2)
+                if parameter == "level":
+                    level = float(value)
+                elif parameter == "scale":
+                    scale = float(value)
+                if parameter is not None and scale is not None:
+                    # pylint --py3k W1619
+                    percentage = 100.0 * level / scale
+                    break
+        return percentage
+
+    def get_top_activity(self, timeout=None):
+        """Returns the name of the top activity (focused app) reported by dumpsys
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADBDevice constructor is used.
+        :return: package name of top activity or None (cannot be determined)
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if self.version < version_codes.Q:
+            return self._get_top_activity_P(timeout=timeout)
+        return self._get_top_activity_Q(timeout=timeout)
+
+    def _get_top_activity_P(self, timeout=None):
+        """Returns the name of the top activity (focused app) reported by dumpsys
+        for Android 9 and earlier.
+        """
+        package = None
+        data = None
+        cmd = "dumpsys window windows"
+        verbose = self._verbose
+        try:
+            self._verbose = False
+            data = self.shell_output(cmd, timeout=timeout)
+        except Exception as e:
+            # dumpsys intermittently fails on some platforms.
+            self._logger.info("_get_top_activity_P: Exception %s: %s" % (cmd, e))
+            return package
+        finally:
+            self._verbose = verbose
+        m = re.search("mFocusedApp(.+)/", data)
+        if not m:
+            # alternative format seen on newer versions of Android
+            m = re.search("FocusedApplication(.+)/", data)
+        if m:
+            line = m.group(0)
+            # Extract package name: string of non-whitespace ending in forward slash
+            m = re.search(r"(\S+)/$", line)
+            if m:
+                package = m.group(1)
+        if self._verbose:
+            self._logger.debug("get_top_activity: %s" % str(package))
+        return package
+
+    def _get_top_activity_Q(self, timeout=None):
+        """Returns the name of the top activity (focused app) reported by dumpsys
+        for Android 10 and later.
+        """
+        package = None
+        data = None
+        cmd = "dumpsys window"
+        verbose = self._verbose
+        try:
+            self._verbose = False
+            data = self.shell_output(cmd, timeout=timeout)
+        except Exception as e:
+            # dumpsys intermittently fails on some platforms (4.3 arm emulator)
+            self._logger.info("_get_top_activity_Q: Exception %s: %s" % (cmd, e))
+            return package
+        finally:
+            self._verbose = verbose
+        m = re.search(r"mFocusedWindow=Window{\S+ \S+ (\S+)/\S+}", data)
+        if m:
+            package = m.group(1)
+        if self._verbose:
+            self._logger.debug("get_top_activity: %s" % str(package))
+        return package
+
+    # System control methods
+
+    def is_device_ready(self, timeout=None):
+        """Checks if a device is ready for testing.
+
+        This method uses the android only package manager to check for
+        readiness.
+
+        :param int timeout: The maximum time
+            in seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        # command_output automatically inserts a 'wait-for-device'
+        # argument to adb. Issuing an empty command is the same as adb
+        # -s <device> wait-for-device. We don't send an explicit
+        # 'wait-for-device' since that would add duplicate
+        # 'wait-for-device' arguments which is an error in newer
+        # versions of adb.
+        self._wait_for_boot_completed(timeout=timeout)
+        pm_error_string = "Error: Could not access the Package Manager"
+        ready_path = os.path.join(self.test_root, "ready")
+        for attempt in range(self._device_ready_retry_attempts):
+            failure = "Unknown failure"
+            success = True
+            try:
+                state = self.get_state(timeout=timeout)
+                if state != "device":
+                    failure = "Device state: %s" % state
+                    success = False
+                else:
+                    if self.enforcing != "Permissive":
+                        self.enforcing = "Permissive"
+                    if self.is_dir(ready_path, timeout=timeout):
+                        self.rmdir(ready_path, timeout=timeout)
+                    self.mkdir(ready_path, timeout=timeout)
+                    self.rmdir(ready_path, timeout=timeout)
+                    # Invoke the pm list packages command to see if it is up and
+                    # running.
+                    data = self.shell_output(
+                        "pm list packages org.mozilla", timeout=timeout
+                    )
+                    if pm_error_string in data:
+                        failure = data
+                        success = False
+            except ADBError as e:
+                success = False
+                failure = str(e)
+
+            if not success:
+                self._logger.debug(
+                    "Attempt %s of %s device not ready: %s"
+                    % (attempt + 1, self._device_ready_retry_attempts, failure)
+                )
+                time.sleep(self._device_ready_retry_wait)
+
+        return success
+
+    def power_on(self, timeout=None):
+        """Sets the device's power stayon value.
+
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        try:
+            self.shell_output("svc power stayon true", timeout=timeout)
+        except ADBError as e:
+            # Executing this via adb shell errors, but not interactively.
+            # Any other exitcode is a real error.
+            if "exitcode: 137" not in str(e):
+                raise
+            self._logger.warning("Unable to set power stayon true: %s" % e)
+
+    # Application management methods
+
+    def add_change_device_settings(self, app_name, timeout=None):
+        """
+        Allows the test to change Android device settings.
+        :param str: app_name: Name of application (e.g. `org.mozilla.fennec`)
+        """
+        self.shell_output(
+            "appops set %s android:write_settings allow" % app_name,
+            timeout=timeout,
+            enable_run_as=False,
+        )
+
+    def add_mock_location(self, app_name, timeout=None):
+        """
+        Allows the Android device to use mock locations.
+        :param str: app_name: Name of application (e.g. `org.mozilla.fennec`)
+        """
+        self.shell_output(
+            "appops set %s android:mock_location allow" % app_name,
+            timeout=timeout,
+            enable_run_as=False,
+        )
+
+    def grant_runtime_permissions(self, app_name, timeout=None):
+        """
+        Grant required runtime permissions to the specified app
+        (typically org.mozilla.fennec_$USER).
+
+        :param str: app_name: Name of application (e.g. `org.mozilla.fennec`)
+        """
+        if self.version >= version_codes.M:
+            permissions = [
+                "android.permission.READ_EXTERNAL_STORAGE",
+                "android.permission.ACCESS_COARSE_LOCATION",
+                "android.permission.ACCESS_FINE_LOCATION",
+                "android.permission.CAMERA",
+                "android.permission.RECORD_AUDIO",
+            ]
+            if self.version < version_codes.R:
+                # WRITE_EXTERNAL_STORAGE is no longer available
+                # in Android 11+
+                permissions.append("android.permission.WRITE_EXTERNAL_STORAGE")
+            self._logger.info("Granting important runtime permissions to %s" % app_name)
+            for permission in permissions:
+                try:
+                    self.shell_output(
+                        "pm grant %s %s" % (app_name, permission),
+                        timeout=timeout,
+                        enable_run_as=False,
+                    )
+                except ADBError as e:
+                    self._logger.warning(
+                        "Unable to grant runtime permission %s to %s due to %s"
+                        % (permission, app_name, e)
+                    )
+
+    def install_app_bundle(self, bundletool, bundle_path, java_home=None, timeout=None):
+        """Installs an app bundle (AAB) on the device.
+
+        :param str bundletool: Path to the bundletool jar
+        :param str bundle_path: The aab file name to be installed.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :param str java_home: Path to the JDK location. Will default to
+            $JAVA_HOME when not specififed.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        device_serial = self._device_serial or os.environ.get("ANDROID_SERIAL")
+        java_home = java_home or os.environ.get("JAVA_HOME")
+        with tempfile.TemporaryDirectory() as temporaryDirectory:
+            # bundletool doesn't come with a debug-key so we need to provide
+            # one ourselves.
+            keystore_path = os.path.join(temporaryDirectory, "debug.keystore")
+            keytool_path = os.path.join(java_home, "bin", "keytool")
+            key_gen = [
+                keytool_path,
+                "-genkey",
+                "-v",
+                "-keystore",
+                keystore_path,
+                "-alias",
+                "androiddebugkey",
+                "-storepass",
+                "android",
+                "-keypass",
+                "android",
+                "-keyalg",
+                "RSA",
+                "-validity",
+                "14000",
+                "-dname",
+                "cn=Unknown, ou=Unknown, o=Unknown, c=Unknown",
+            ]
+            self._logger.info("key_gen: %s" % key_gen)
+            try:
+                subprocess.check_call(key_gen, timeout=timeout)
+            except subprocess.TimeoutExpired:
+                raise ADBTimeoutError("ADBDevice: unable to generate key")
+
+            apks_path = "{}/tmp.apks".format(temporaryDirectory)
+            java_path = os.path.join(java_home, "bin", "java")
+            build_apks = [
+                java_path,
+                "-jar",
+                bundletool,
+                "build-apks",
+                "--bundle={}".format(bundle_path),
+                "--output={}".format(apks_path),
+                "--connected-device",
+                "--device-id={}".format(device_serial),
+                "--adb={}".format(self._adb_path),
+                "--ks={}".format(keystore_path),
+                "--ks-key-alias=androiddebugkey",
+                "--key-pass=pass:android",
+                "--ks-pass=pass:android",
+            ]
+            self._logger.info("build_apks: %s" % build_apks)
+
+            try:
+                subprocess.check_call(build_apks, timeout=timeout)
+            except subprocess.TimeoutExpired:
+                raise ADBTimeoutError("ADBDevice: unable to generate apks")
+            install_apks = [
+                java_path,
+                "-jar",
+                bundletool,
+                "install-apks",
+                "--apks={}".format(apks_path),
+                "--device-id={}".format(device_serial),
+                "--adb={}".format(self._adb_path),
+            ]
+            self._logger.info("install_apks: %s" % install_apks)
+
+            try:
+                subprocess.check_call(install_apks, timeout=timeout)
+            except subprocess.TimeoutExpired:
+                raise ADBTimeoutError("ADBDevice: unable to install apks")
+
+    def install_app(self, apk_path, replace=False, timeout=None):
+        """Installs an app on the device.
+
+        :param str apk_path: The apk file name to be installed.
+        :param bool replace: If True, replace existing application.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :return: string - name of installed package.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        dump_packages = "dumpsys package packages"
+        packages_before = set(self.shell_output(dump_packages).split("\n"))
+        cmd = ["install"]
+        if replace:
+            cmd.append("-r")
+        cmd.append(apk_path)
+        data = self.command_output(cmd, timeout=timeout)
+        if data.find("Success") == -1:
+            raise ADBError("install failed for %s. Got: %s" % (apk_path, data))
+        packages_after = set(self.shell_output(dump_packages).split("\n"))
+        packages_diff = packages_after - packages_before
+        package_name = None
+        re_pkg = re.compile(r"\s+pkg=Package{[^ ]+ (.*)}")
+        for diff in packages_diff:
+            match = re_pkg.match(diff)
+            if match:
+                package_name = match.group(1)
+                break
+        return package_name
+
+    def is_app_installed(self, app_name, timeout=None):
+        """Returns True if an app is installed on the device.
+
+        :param str app_name: name of the app to be checked.
+        :param int timeout: maximum time in seconds for any spawned
+            adb process to complete before throwing an ADBTimeoutError.
+            This timeout is per adb call. If it is not specified,
+            the value set in the ADB constructor is used.
+
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        pm_error_string = "Error: Could not access the Package Manager"
+        data = self.shell_output(
+            "pm list package %s" % app_name, timeout=timeout, enable_run_as=False
+        )
+        if pm_error_string in data:
+            raise ADBError(pm_error_string)
+        output = [line for line in data.splitlines() if line.strip()]
+        return any(["package:{}".format(app_name) == out for out in output])
+
+    def launch_application(
+        self,
+        app_name,
+        activity_name,
+        intent,
+        url=None,
+        extras=None,
+        wait=True,
+        fail_if_running=True,
+        grant_runtime_permissions=True,
+        timeout=None,
+        is_service=False,
+    ):
+        """Launches an Android application
+
+        :param str app_name: Name of application (e.g. `com.android.chrome`)
+        :param str activity_name: Name of activity to launch (e.g. `.Main`)
+        :param str intent: Intent to launch application with
+        :param str url: URL to open
+        :param dict extras: Extra arguments for application.
+        :param bool wait: If True, wait for application to start before
+            returning.
+        :param bool fail_if_running: Raise an exception if instance of
+            application is already running.
+        :param bool grant_runtime_permissions: Grant special runtime
+            permissions.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :param bool is_service: Whether we want to launch a service or not.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        # If fail_if_running is True, we throw an exception here. Only one
+        # instance of an application can be running at once on Android,
+        # starting a new instance may not be what we want depending on what
+        # we want to do
+        if fail_if_running and self.process_exist(app_name, timeout=timeout):
+            raise ADBError(
+                "Only one instance of an application may be running " "at once"
+            )
+
+        if grant_runtime_permissions:
+            self.grant_runtime_permissions(app_name)
+
+        acmd = ["am"] + ["startservice" if is_service else "start"]
+        if wait:
+            acmd.extend(["-W"])
+        acmd.extend(
+            [
+                "-n",
+                "%s/%s" % (app_name, activity_name),
+            ]
+        )
+        if intent:
+            acmd.extend(["-a", intent])
+
+        # Note that isinstance(True, int) and isinstance(False, int)
+        # is True. This means we must test the type of the value
+        # against bool prior to testing it against int in order to
+        # prevent falsely identifying a bool value as an int.
+        if extras:
+            for (key, val) in extras.items():
+                if isinstance(val, bool):
+                    extra_type_param = "--ez"
+                elif isinstance(val, int):
+                    extra_type_param = "--ei"
+                else:
+                    extra_type_param = "--es"
+                acmd.extend([extra_type_param, str(key), str(val)])
+
+        if url:
+            acmd.extend(["-d", url])
+
+        cmd = self._escape_command_line(acmd)
+        self._logger.info("launch_application: %s" % cmd)
+        cmd_output = self.shell_output(cmd, timeout=timeout)
+        if "Error:" in cmd_output:
+            for line in cmd_output.split("\n"):
+                self._logger.info(line)
+            raise ADBError(
+                "launch_application %s/%s failed" % (app_name, activity_name)
+            )
+
+    def launch_fennec(
+        self,
+        app_name,
+        intent="android.intent.action.VIEW",
+        moz_env=None,
+        extra_args=None,
+        url=None,
+        wait=True,
+        fail_if_running=True,
+        timeout=None,
+    ):
+        """Convenience method to launch Fennec on Android with various
+        debugging arguments
+
+        :param str app_name: Name of fennec application (e.g.
+            `org.mozilla.fennec`)
+        :param str intent: Intent to launch application.
+        :param str moz_env: Mozilla specific environment to pass into
+            application.
+        :param str extra_args: Extra arguments to be parsed by fennec.
+        :param str url: URL to open
+        :param bool wait: If True, wait for application to start before
+            returning.
+        :param bool fail_if_running: Raise an exception if instance of
+            application is already running.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        extras = {}
+
+        if moz_env:
+            # moz_env is expected to be a dictionary of environment variables:
+            # Fennec itself will set them when launched
+            for (env_count, (env_key, env_val)) in enumerate(moz_env.items()):
+                extras["env" + str(env_count)] = env_key + "=" + env_val
+
+        # Additional command line arguments that fennec will read and use (e.g.
+        # with a custom profile)
+        if extra_args:
+            extras["args"] = " ".join(extra_args)
+
+        self.launch_application(
+            app_name,
+            "org.mozilla.gecko.BrowserApp",
+            intent,
+            url=url,
+            extras=extras,
+            wait=wait,
+            fail_if_running=fail_if_running,
+            timeout=timeout,
+        )
+
+    def launch_service(
+        self,
+        app_name,
+        activity_name=None,
+        intent="android.intent.action.MAIN",
+        moz_env=None,
+        extra_args=None,
+        url=None,
+        e10s=False,
+        wait=True,
+        grant_runtime_permissions=False,
+        out_file=None,
+        timeout=None,
+    ):
+        """Convenience method to launch a service on Android with various
+        debugging arguments; convenient for geckoview apps.
+
+        :param str app_name: Name of application (e.g.
+            `org.mozilla.geckoview_example` or `org.mozilla.geckoview.test_runner`)
+        :param str activity_name: Activity name, like `GeckoViewActivity`, or
+            `TestRunnerActivity`.
+        :param str intent: Intent to launch application.
+        :param str moz_env: Mozilla specific environment to pass into
+            application.
+        :param str extra_args: Extra arguments to be parsed by the app.
+        :param str url: URL to open
+        :param bool e10s: If True, run in multiprocess mode.
+        :param bool wait: If True, wait for application to start before
+            returning.
+        :param bool grant_runtime_permissions: Grant special runtime
+            permissions.
+        :param str out_file: File where to redirect the output to
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        extras = {}
+
+        if moz_env:
+            # moz_env is expected to be a dictionary of environment variables:
+            # geckoview_example itself will set them when launched
+            for (env_count, (env_key, env_val)) in enumerate(moz_env.items()):
+                extras["env" + str(env_count)] = env_key + "=" + env_val
+
+        # Additional command line arguments that the app will read and use (e.g.
+        # with a custom profile)
+        if extra_args:
+            for (arg_count, arg) in enumerate(extra_args):
+                extras["arg" + str(arg_count)] = arg
+
+        extras["use_multiprocess"] = e10s
+        extras["out_file"] = out_file
+        self.launch_application(
+            app_name,
+            "%s.%s" % (app_name, activity_name),
+            intent,
+            url=url,
+            extras=extras,
+            wait=wait,
+            grant_runtime_permissions=grant_runtime_permissions,
+            timeout=timeout,
+            is_service=True,
+            fail_if_running=False,
+        )
+
+    def launch_activity(
+        self,
+        app_name,
+        activity_name=None,
+        intent="android.intent.action.MAIN",
+        moz_env=None,
+        extra_args=None,
+        url=None,
+        e10s=False,
+        wait=True,
+        fail_if_running=True,
+        timeout=None,
+    ):
+        """Convenience method to launch an application on Android with various
+        debugging arguments; convenient for geckoview apps.
+
+        :param str app_name: Name of application (e.g.
+            `org.mozilla.geckoview_example` or `org.mozilla.geckoview.test_runner`)
+        :param str activity_name: Activity name, like `GeckoViewActivity`, or
+            `TestRunnerActivity`.
+        :param str intent: Intent to launch application.
+        :param str moz_env: Mozilla specific environment to pass into
+            application.
+        :param str extra_args: Extra arguments to be parsed by the app.
+        :param str url: URL to open
+        :param bool e10s: If True, run in multiprocess mode.
+        :param bool wait: If True, wait for application to start before
+            returning.
+        :param bool fail_if_running: Raise an exception if instance of
+            application is already running.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        extras = {}
+
+        if moz_env:
+            # moz_env is expected to be a dictionary of environment variables:
+            # geckoview_example itself will set them when launched
+            for (env_count, (env_key, env_val)) in enumerate(moz_env.items()):
+                extras["env" + str(env_count)] = env_key + "=" + env_val
+
+        # Additional command line arguments that the app will read and use (e.g.
+        # with a custom profile)
+        if extra_args:
+            for (arg_count, arg) in enumerate(extra_args):
+                extras["arg" + str(arg_count)] = arg
+
+        extras["use_multiprocess"] = e10s
+        self.launch_application(
+            app_name,
+            "%s.%s" % (app_name, activity_name),
+            intent,
+            url=url,
+            extras=extras,
+            wait=wait,
+            fail_if_running=fail_if_running,
+            timeout=timeout,
+        )
+
+    def stop_application(self, app_name, timeout=None):
+        """Stops the specified application
+
+        For Android 3.0+, we use the "am force-stop" to do this, which
+        is reliable and does not require root. For earlier versions of
+        Android, we simply try to manually kill the processes started
+        by the app repeatedly until none is around any more. This is
+        less reliable and does require root.
+
+        :param str app_name: Name of application (e.g. `com.android.chrome`)
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :param bool root: Flag specifying if the command should be
+            executed as root.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if self.version >= version_codes.HONEYCOMB:
+            self.shell_output("am force-stop %s" % app_name, timeout=timeout)
+        else:
+            num_tries = 0
+            max_tries = 5
+            while self.process_exist(app_name, timeout=timeout):
+                if num_tries > max_tries:
+                    raise ADBError(
+                        "Couldn't successfully kill %s after %s "
+                        "tries" % (app_name, max_tries)
+                    )
+                self.pkill(app_name, timeout=timeout)
+                num_tries += 1
+
+                # sleep for a short duration to make sure there are no
+                # additional processes in the process of being launched
+                # (this is not 100% guaranteed to work since it is inherently
+                # racey, but it's the best we can do)
+                time.sleep(1)
+
+    def uninstall_app(self, app_name, reboot=False, timeout=None):
+        """Uninstalls an app on the device.
+
+        :param str app_name: The name of the app to be
+            uninstalled.
+        :param bool reboot: Flag indicating that the device should
+            be rebooted after the app is uninstalled. No reboot occurs
+            if the app is not installed.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        if self.is_app_installed(app_name, timeout=timeout):
+            data = self.command_output(["uninstall", app_name], timeout=timeout)
+            if data.find("Success") == -1:
+                self._logger.debug("uninstall_app failed: %s" % data)
+                raise ADBError("uninstall failed for %s. Got: %s" % (app_name, data))
+            self.run_as_package = None
+            if reboot:
+                self.reboot(timeout=timeout)
+
+    def update_app(self, apk_path, timeout=None):
+        """Updates an app on the device and reboots.
+
+        :param str apk_path: The apk file name to be
+            updated.
+        :param int timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.
+            This timeout is per adb call. The total time spent
+            may exceed this value. If it is not specified, the value
+            set in the ADB constructor is used.
+        :raises: :exc:`ADBTimeoutError`
+                 :exc:`ADBError`
+        """
+        cmd = ["install", "-r"]
+        if self.version >= version_codes.M:
+            cmd.append("-g")
+        cmd.append(apk_path)
+        output = self.command_output(cmd, timeout=timeout)
+        self.reboot(timeout=timeout)
+        return output
diff --git a/testing/mozbase/mozdevice/mozdevice/adb_android.py b/testing/mozbase/mozdevice/mozdevice/adb_android.py
new file mode 100644
index 0000000000..135fda4195
--- /dev/null
+++ b/testing/mozbase/mozdevice/mozdevice/adb_android.py
@@ -0,0 +1,13 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+from .adb import ADBDevice
+
+
+class ADBAndroid(ADBDevice):
+    """ADBAndroid functionality is now provided by ADBDevice. New callers
+    should use ADBDevice.
+    """
+
+    pass
diff --git a/testing/mozbase/mozdevice/mozdevice/remote_process_monitor.py b/testing/mozbase/mozdevice/mozdevice/remote_process_monitor.py
new file mode 100644
index 0000000000..29e0d4e008
--- /dev/null
+++ b/testing/mozbase/mozdevice/mozdevice/remote_process_monitor.py
@@ -0,0 +1,285 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+import re
+import time
+
+import six
+
+from .adb import ADBTimeoutError
+
+
+class RemoteProcessMonitor:
+    """
+    RemoteProcessMonitor provides a convenient way to run a remote process,
+    dump its log file, and wait for it to end.
+    """
+
+    def __init__(
+        self,
+        app_name,
+        device,
+        log,
+        message_logger,
+        remote_log_file,
+        remote_profile,
+    ):
+        self.app_name = app_name
+        self.device = device
+        self.log = log
+        self.remote_log_file = remote_log_file
+        self.remote_profile = remote_profile
+        self.counts = {}
+        self.counts["pass"] = 0
+        self.counts["fail"] = 0
+        self.counts["todo"] = 0
+        self.last_test_seen = "RemoteProcessMonitor"
+        self.message_logger = message_logger
+        if self.device.is_file(self.remote_log_file):
+            self.device.rm(self.remote_log_file)
+            self.log.info("deleted remote log %s" % self.remote_log_file)
+
+    def launch(self, app, debugger_info, test_url, extra_args, env, e10s):
+        """
+        Start the remote activity.
+        """
+        if self.app_name and self.device.process_exist(self.app_name):
+            self.log.info("%s is already running. Stopping..." % self.app_name)
+            self.device.stop_application(self.app_name)
+        args = []
+        if debugger_info:
+            args.extend(debugger_info.args)
+            args.append(app)
+        args.extend(extra_args)
+        activity = "TestRunnerActivity"
+        self.device.launch_activity(
+            self.app_name,
+            activity_name=activity,
+            e10s=e10s,
+            moz_env=env,
+            extra_args=args,
+            url=test_url,
+        )
+        return self.pid
+
+    @property
+    def pid(self):
+        """
+        Determine the pid of the remote process (or the first process with
+        the same name).
+        """
+        procs = self.device.get_process_list()
+        # limit the comparison to the first 75 characters due to a
+        # limitation in processname length in android.
+        pids = [proc[0] for proc in procs if proc[1] == self.app_name[:75]]
+        if pids is None or len(pids) < 1:
+            return 0
+        return pids[0]
+
+    def read_stdout(self):
+        """
+        Fetch the full remote log file, log any new content and return True if new
+        content is processed.
+        """
+        try:
+            new_log_content = self.device.get_file(
+                self.remote_log_file, offset=self.stdout_len
+            )
+        except ADBTimeoutError:
+            raise
+        except Exception as e:
+            self.log.error(
+                "%s | exception reading log: %s" % (self.last_test_seen, str(e))
+            )
+            return False
+        if not new_log_content:
+            return False
+
+        self.stdout_len += len(new_log_content)
+        new_log_content = six.ensure_str(new_log_content, errors="replace")
+
+        self.log_buffer += new_log_content
+        lines = self.log_buffer.split("\n")
+        lines = [l for l in lines if l]
+
+        if lines:
+            if self.log_buffer.endswith("\n"):
+                # all lines are complete; no need to buffer
+                self.log_buffer = ""
+            else:
+                # keep the last (unfinished) line in the buffer
+                self.log_buffer = lines[-1]
+                del lines[-1]
+        if not lines:
+            return False
+
+        for line in lines:
+            # This passes the line to the logger (to be logged or buffered)
+            if isinstance(line, six.text_type):
+                # if line is unicode - let's encode it to bytes
+                parsed_messages = self.message_logger.write(
+                    line.encode("UTF-8", "replace")
+                )
+            else:
+                # if line is bytes type, write it as it is
+                parsed_messages = self.message_logger.write(line)
+
+            for message in parsed_messages:
+                if isinstance(message, dict):
+                    if message.get("action") == "test_start":
+                        self.last_test_seen = message["test"]
+                    elif message.get("action") == "test_end":
+                        self.last_test_seen = "{} (finished)".format(message["test"])
+                    elif message.get("action") == "suite_end":
+                        self.last_test_seen = "Last test finished"
+                    elif message.get("action") == "log":
+                        line = message["message"].strip()
+                        m = re.match(".*:\s*(\d*)", line)
+                        if m:
+                            try:
+                                val = int(m.group(1))
+                                if "Passed:" in line:
+                                    self.counts["pass"] += val
+                                    self.last_test_seen = "Last test finished"
+                                elif "Failed:" in line:
+                                    self.counts["fail"] += val
+                                elif "Todo:" in line:
+                                    self.counts["todo"] += val
+                            except ADBTimeoutError:
+                                raise
+                            except Exception:
+                                pass
+
+        return True
+
+    def wait(self, timeout=None):
+        """
+        Wait for the remote process to end (or for its activity to go to background).
+        While waiting, periodically retrieve the process output and print it.
+        If the process is still running but no output is received in *timeout*
+        seconds, return False; else, once the process exits/goes to background,
+        return True.
+        """
+        self.log_buffer = ""
+        self.stdout_len = 0
+
+        timer = 0
+        output_timer = 0
+        interval = 10
+        status = True
+        top = self.app_name
+
+        # wait for log creation on startup
+        retries = 0
+        while retries < 20 and not self.device.is_file(self.remote_log_file):
+            retries += 1
+            time.sleep(1)
+        if self.device.is_file(self.remote_log_file):
+            # We must change the remote log's permissions so that the shell can read it.
+            self.device.chmod(self.remote_log_file, mask="666")
+        else:
+            self.log.warning(
+                "Failed wait for remote log: %s missing?" % self.remote_log_file
+            )
+
+        while top == self.app_name:
+            has_output = self.read_stdout()
+            if has_output:
+                output_timer = 0
+            if self.counts["pass"] > 0:
+                interval = 0.5
+            time.sleep(interval)
+            timer += interval
+            output_timer += interval
+            if timeout and output_timer > timeout:
+                status = False
+                break
+            if not has_output:
+                top = self.device.get_top_activity(timeout=60)
+                if top is None:
+                    self.log.info("Failed to get top activity, retrying, once...")
+                    top = self.device.get_top_activity(timeout=60)
+
+        # Flush anything added to stdout during the sleep
+        self.read_stdout()
+        self.log.info("wait for %s complete; top activity=%s" % (self.app_name, top))
+        if top == self.app_name:
+            self.log.info("%s unexpectedly found running. Killing..." % self.app_name)
+            self.kill()
+        if not status:
+            self.log.error(
+                "TEST-UNEXPECTED-FAIL | %s | "
+                "application timed out after %d seconds with no output"
+                % (self.last_test_seen, int(timeout))
+            )
+        return status
+
+    def kill(self):
+        """
+        End a troublesome remote process: Trigger ANR and breakpad dumps, then
+        force the application to end.
+        """
+
+        # Trigger an ANR report with "kill -3" (SIGQUIT)
+        try:
+            self.device.pkill(self.app_name, sig=3, attempts=1)
+        except ADBTimeoutError:
+            raise
+        except:  # NOQA: E722
+            pass
+        time.sleep(3)
+
+        # Trigger a breakpad dump with "kill -6" (SIGABRT)
+        try:
+            self.device.pkill(self.app_name, sig=6, attempts=1)
+        except ADBTimeoutError:
+            raise
+        except:  # NOQA: E722
+            pass
+
+        # Wait for process to end
+        retries = 0
+        while retries < 3:
+            if self.device.process_exist(self.app_name):
+                self.log.info(
+                    "%s still alive after SIGABRT: waiting..." % self.app_name
+                )
+                time.sleep(5)
+            else:
+                break
+            retries += 1
+        if self.device.process_exist(self.app_name):
+            try:
+                self.device.pkill(self.app_name, sig=9, attempts=1)
+            except ADBTimeoutError:
+                raise
+            except:  # NOQA: E722
+                self.log.error("%s still alive after SIGKILL!" % self.app_name)
+        if self.device.process_exist(self.app_name):
+            self.device.stop_application(self.app_name)
+
+        # Test harnesses use the MOZ_CRASHREPORTER environment variables to suppress
+        # the interactive crash reporter, but that may not always be effective;
+        # check for and cleanup errant crashreporters.
+        crashreporter = "%s.CrashReporter" % self.app_name
+        if self.device.process_exist(crashreporter):
+            self.log.warning(
+                "%s unexpectedly found running. Killing..." % crashreporter
+            )
+            try:
+                self.device.pkill(crashreporter)
+            except ADBTimeoutError:
+                raise
+            except:  # NOQA: E722
+                pass
+        if self.device.process_exist(crashreporter):
+            self.log.error("%s still running!!" % crashreporter)
+
+    @staticmethod
+    def elf_arm(filename):
+        """
+        Determine if the specified file is an ARM binary.
+        """
+        data = open(filename, "rb").read(20)
+        return data[:4] == "\x7fELF" and ord(data[18]) == 40  # EM_ARM
diff --git a/testing/mozbase/mozdevice/mozdevice/version_codes.py b/testing/mozbase/mozdevice/mozdevice/version_codes.py
new file mode 100644
index 0000000000..c1d56c7b84
--- /dev/null
+++ b/testing/mozbase/mozdevice/mozdevice/version_codes.py
@@ -0,0 +1,70 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+"""
+VERSION CODES of the android releases.
+
+See http://developer.android.com/reference/android/os/Build.VERSION_CODES.html.
+"""
+# Magic version number for a current development build, which has
+# not yet turned into an official release.
+CUR_DEVELOPMENT = 10000
+
+# October 2008: The original, first, version of Android
+BASE = 1
+# February 2009: First Android update, officially called 1.1
+BASE_1_1 = 2
+# May 2009: Android 1.5
+CUPCAKE = 3
+# September 2009: Android 1.6
+DONUT = 4
+# November 2009: Android 2.0
+ECLAIR = 5
+# December 2009: Android 2.0.1
+ECLAIR_0_1 = 6
+# January 2010: Android 2.1
+ECLAIR_MR1 = 7
+# June 2010: Android 2.2
+FROYO = 8
+# November 2010: Android 2.3
+GINGERBREAD = 9
+# February 2011: Android 2.3.3
+GINGERBREAD_MR1 = 10
+# February 2011: Android 3.0
+HONEYCOMB = 11
+# May 2011: Android 3.1
+HONEYCOMB_MR1 = 12
+# June 2011: Android 3.2
+HONEYCOMB_MR2 = 13
+# October 2011: Android 4.0
+ICE_CREAM_SANDWICH = 14
+# December 2011: Android 4.0.3
+ICE_CREAM_SANDWICH_MR1 = 15
+# June 2012: Android 4.1
+JELLY_BEAN = 16
+# November 2012: Android 4.2
+JELLY_BEAN_MR1 = 17
+# July 2013: Android 4.3
+JELLY_BEAN_MR2 = 18
+# October 2013: Android 4.4
+KITKAT = 19
+# Android 4.4W
+KITKAT_WATCH = 20
+# Lollilop
+LOLLIPOP = 21
+LOLLIPOP_MR1 = 22
+# Marshmallow
+M = 23
+# Nougat
+N = 24
+N_MR1 = 25
+# Oreo
+O = 26
+O_MR1 = 27
+# Pie
+P = 28
+# 10
+Q = 29
+# 11
+R = 30
diff --git a/testing/mozbase/mozdevice/setup.cfg b/testing/mozbase/mozdevice/setup.cfg
new file mode 100644
index 0000000000..2a9acf13da
--- /dev/null
+++ b/testing/mozbase/mozdevice/setup.cfg
@@ -0,0 +1,2 @@
+[bdist_wheel]
+universal = 1
diff --git a/testing/mozbase/mozdevice/setup.py b/testing/mozbase/mozdevice/setup.py
new file mode 100644
index 0000000000..4d876ab00c
--- /dev/null
+++ b/testing/mozbase/mozdevice/setup.py
@@ -0,0 +1,34 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this file,
+# You can obtain one at http://mozilla.org/MPL/2.0/.
+
+from setuptools import setup
+
+PACKAGE_NAME = "mozdevice"
+PACKAGE_VERSION = "4.1.0"
+
+deps = ["mozlog >= 6.0"]
+
+setup(
+    name=PACKAGE_NAME,
+    version=PACKAGE_VERSION,
+    description="Mozilla-authored device management",
+    long_description="see https://firefox-source-docs.mozilla.org/mozbase/index.html",
+    classifiers=[
+        "Programming Language :: Python :: 2.7",
+        "Programming Language :: Python :: 3.5",
+    ],
+    # Get strings from http://pypi.python.org/pypi?%3Aaction=list_classifiers
+    keywords="",
+    author="Mozilla Automation and Testing Team",
+    author_email="tools@lists.mozilla.org",
+    url="https://wiki.mozilla.org/Auto-tools/Projects/Mozbase",
+    license="MPL",
+    packages=["mozdevice"],
+    include_package_data=True,
+    zip_safe=False,
+    install_requires=deps,
+    entry_points="""
+      # -*- Entry points: -*-
+      """,
+)
diff --git a/testing/mozbase/mozdevice/tests/conftest.py b/testing/mozbase/mozdevice/tests/conftest.py
new file mode 100644
index 0000000000..831090a428
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/conftest.py
@@ -0,0 +1,236 @@
+import sys
+from random import randint, seed
+from unittest.mock import patch
+
+import mozdevice
+import pytest
+from six import StringIO
+
+# set up required module-level variables/objects
+seed(1488590)
+
+
+def random_tcp_port():
+    """Returns a pseudo-random integer generated from a seed.
+
+    :returns: int: pseudo-randomly generated integer
+    """
+    return randint(8000, 12000)
+
+
+@pytest.fixture(autouse=True)
+def mock_command_output(monkeypatch):
+    """Monkeypatches the ADBDevice.command_output() method call.
+
+    Instead of calling the concrete method implemented in adb.py::ADBDevice,
+    this method simply returns a string representation of the command that was
+    received.
+
+    As an exception, if the command begins with "forward tcp:0 ", this method
+    returns a mock port number.
+
+    :param object monkeypatch: pytest provided fixture for mocking.
+    """
+
+    def command_output_wrapper(object, cmd, timeout):
+        """Actual monkeypatch implementation of the command_output method call.
+
+        :param object object: placeholder object representing ADBDevice
+        :param str cmd: command to be executed
+        :param timeout: unused parameter to represent timeout threshold
+        :returns: string - string representation of command to be executed
+                  int - mock port number (only used when cmd begins with "forward tcp:0 ")
+        """
+
+        if cmd[0] == "forward" and cmd[1] == "tcp:0":
+            return 7777
+
+        print(str(cmd))
+        return str(cmd)
+
+    monkeypatch.setattr(mozdevice.ADBDevice, "command_output", command_output_wrapper)
+
+
+@pytest.fixture(autouse=True)
+def mock_shell_output(monkeypatch):
+    """Monkeypatches the ADBDevice.shell_output() method call.
+
+    Instead of returning the output of an adb call, this method will
+    return appropriate string output. Content of the string output is
+    in line with the calling method's expectations.
+
+    :param object monkeypatch: pytest provided fixture for mocking.
+    """
+
+    def shell_output_wrapper(
+        object, cmd, env=None, cwd=None, timeout=None, enable_run_as=False
+    ):
+        """Actual monkeypatch implementation of the shell_output method call.
+
+        :param object object: placeholder object representing ADBDevice
+        :param str cmd: command to be executed
+        :param env: contains the environment variable
+        :type env: dict or None
+        :param cwd: The directory from which to execute.
+        :type cwd: str or None
+        :param timeout: unused parameter tp represent timeout threshold
+        :param enable_run_as: bool determining if run_as <app> is to be used
+        :returns: string - string representation of a simulated call to adb
+        """
+        if "pm list package error" in cmd:
+            return "Error: Could not access the Package Manager"
+        elif "pm list package none" in cmd:
+            return ""
+        elif "pm list package" in cmd:
+            apps = ["org.mozilla.fennec", "org.mozilla.geckoview_example"]
+            return ("package:{}\n" * len(apps)).format(*apps)
+        else:
+            print(str(cmd))
+            return str(cmd)
+
+    monkeypatch.setattr(mozdevice.ADBDevice, "shell_output", shell_output_wrapper)
+
+
+@pytest.fixture(autouse=True)
+def mock_is_path_internal_storage(monkeypatch):
+    """Monkeypatches the ADBDevice.is_path_internal_storage() method call.
+
+    Instead of returning the outcome of whether the path provided is
+    internal storage or external, this will always return True.
+
+    :param object monkeypatch: pytest provided fixture for mocking.
+    """
+
+    def is_path_internal_storage_wrapper(object, path, timeout=None):
+        """Actual monkeypatch implementation of the is_path_internal_storage() call.
+
+        :param str path: The path to test.
+        :param timeout: The maximum time in
+            seconds for any spawned adb process to complete before
+            throwing an ADBTimeoutError.  This timeout is per adb call. The
+            total time spent may exceed this value. If it is not
+            specified, the value set in the ADBDevice constructor is used.
+        :returns: boolean
+
+        :raises: * ADBTimeoutError
+                 * ADBError
+        """
+        if "internal_storage" in path:
+            return True
+        return False
+
+    monkeypatch.setattr(
+        mozdevice.ADBDevice,
+        "is_path_internal_storage",
+        is_path_internal_storage_wrapper,
+    )
+
+
+@pytest.fixture(autouse=True)
+def mock_enable_run_as_for_path(monkeypatch):
+    """Monkeypatches the ADBDevice.enable_run_as_for_path(path) method.
+
+    Always return True
+
+    :param object monkeypatch: pytest provided fixture for mocking.
+    """
+
+    def enable_run_as_for_path_wrapper(object, path):
+        """Actual monkeypatch implementation of the enable_run_as_for_path() call.
+
+        :param str path: The path to test.
+        :returns: boolean
+        """
+        return True
+
+    monkeypatch.setattr(
+        mozdevice.ADBDevice, "enable_run_as_for_path", enable_run_as_for_path_wrapper
+    )
+
+
+@pytest.fixture(autouse=True)
+def mock_shell_bool(monkeypatch):
+    """Monkeypatches the ADBDevice.shell_bool() method call.
+
+    Instead of returning the output of an adb call, this method will
+    return appropriate string output. Content of the string output is
+    in line with the calling method's expectations.
+
+    :param object monkeypatch: pytest provided fixture for mocking.
+    """
+
+    def shell_bool_wrapper(
+        object, cmd, env=None, cwd=None, timeout=None, enable_run_as=False
+    ):
+        """Actual monkeypatch implementation of the shell_bool method call.
+
+        :param object object: placeholder object representing ADBDevice
+        :param str cmd: command to be executed
+        :param env: contains the environment variable
+        :type env: dict or None
+        :param cwd: The directory from which to execute.
+        :type cwd: str or None
+        :param timeout: unused parameter tp represent timeout threshold
+        :param enable_run_as: bool determining if run_as <app> is to be used
+        :returns: string - string representation of a simulated call to adb
+        """
+        print(cmd)
+        return str(cmd)
+
+    monkeypatch.setattr(mozdevice.ADBDevice, "shell_bool", shell_bool_wrapper)
+
+
+@pytest.fixture(autouse=True)
+def mock_adb_object():
+    """Patches the __init__ method call when instantiating ADBDevice.
+
+    ADBDevice normally requires instantiated objects in order to execute
+    its commands.
+
+    With a pytest-mock patch, we are able to mock the initialization of
+    the ADBDevice object. By yielding the instantiated mock object,
+    unit tests can be run that call methods that require an instantiated
+    object.
+
+    :yields: ADBDevice - mock instance of ADBDevice object
+    """
+    with patch.object(mozdevice.ADBDevice, "__init__", lambda self: None):
+        yield mozdevice.ADBDevice()
+
+
+@pytest.fixture
+def redirect_stdout_and_assert():
+    """Redirects the stdout pipe temporarily to a StringIO stream.
+
+    This is useful to assert on methods that do not return
+    a value, such as most ADBDevice methods.
+
+    The original stdout pipe is preserved throughout the process.
+
+    :returns: _wrapper method
+    """
+
+    def _wrapper(func, **kwargs):
+        """Implements the stdout sleight-of-hand.
+
+        After preserving the original sys.stdout, it is switched
+        to use cStringIO.StringIO.
+
+        Method with no return value is called, and the stdout
+        pipe is switched back to the original sys.stdout.
+
+        The expected outcome is received as part of the kwargs.
+        This is asserted against a sanitized output from the method
+        under test.
+
+        :param object func: method under test
+        :param dict kwargs: dictionary of function parameters
+        """
+        original_stdout = sys.stdout
+        sys.stdout = testing_stdout = StringIO()
+        expected_text = kwargs.pop("text")
+        func(**kwargs)
+        sys.stdout = original_stdout
+        assert expected_text in testing_stdout.getvalue().rstrip()
+
+    return _wrapper
diff --git a/testing/mozbase/mozdevice/tests/manifest.ini b/testing/mozbase/mozdevice/tests/manifest.ini
new file mode 100644
index 0000000000..208fd06608
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/manifest.ini
@@ -0,0 +1,6 @@
+[DEFAULT]
+subsuite = mozbase
+[test_socket_connection.py]
+[test_is_app_installed.py]
+[test_chown.py]
+[test_escape_command_line.py]
diff --git a/testing/mozbase/mozdevice/tests/test_chown.py b/testing/mozbase/mozdevice/tests/test_chown.py
new file mode 100644
index 0000000000..1bbfcc5d8e
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/test_chown.py
@@ -0,0 +1,67 @@
+#!/usr/bin/env python
+
+import logging
+from unittest.mock import patch
+
+import mozunit
+import pytest
+
+
+@pytest.mark.parametrize("boolean_value", [True, False])
+def test_set_chown_r_attribute(
+    mock_adb_object, redirect_stdout_and_assert, boolean_value
+):
+    mock_adb_object._chown_R = boolean_value
+    assert mock_adb_object._chown_R == boolean_value
+
+
+def test_chown_path_internal(mock_adb_object, redirect_stdout_and_assert):
+    """Tests whether attempt to chown internal path is ignored"""
+    with patch.object(logging, "getLogger") as mock_log:
+        mock_adb_object._logger = mock_log
+
+    testing_parameters = {
+        "owner": "someuser",
+        "path": "internal_storage",
+    }
+    expected = "Ignoring attempt to chown external storage"
+    mock_adb_object.chown(**testing_parameters)
+    assert "".join(mock_adb_object._logger.method_calls[0][1]) != ""
+    assert "".join(mock_adb_object._logger.method_calls[0][1]) == expected
+
+
+def test_chown_one_path(mock_adb_object, redirect_stdout_and_assert):
+    """Tests the path where only one path is provided."""
+    # set up mock logging and self._chown_R attribute.
+    with patch.object(logging, "getLogger") as mock_log:
+        mock_adb_object._logger = mock_log
+    mock_adb_object._chown_R = True
+
+    testing_parameters = {
+        "owner": "someuser",
+        "path": "/system",
+    }
+    command = "chown {owner} {path}".format(**testing_parameters)
+    testing_parameters["text"] = command
+    redirect_stdout_and_assert(mock_adb_object.chown, **testing_parameters)
+
+
+def test_chown_one_path_with_group(mock_adb_object, redirect_stdout_and_assert):
+    """Tests the path where group is provided."""
+    # set up mock logging and self._chown_R attribute.
+    with patch.object(logging, "getLogger") as mock_log:
+        mock_adb_object._logger = mock_log
+    mock_adb_object._chown_R = True
+
+    testing_parameters = {
+        "owner": "someuser",
+        "path": "/system",
+        "group": "group_2",
+    }
+    command = "chown {owner}.{group} {path}".format(**testing_parameters)
+    testing_parameters["text"] = command
+    redirect_stdout_and_assert(mock_adb_object.chown, **testing_parameters)
+
+
+if __name__ == "__main__":
+    mozunit.main()
diff --git a/testing/mozbase/mozdevice/tests/test_escape_command_line.py b/testing/mozbase/mozdevice/tests/test_escape_command_line.py
new file mode 100644
index 0000000000..112dd936c5
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/test_escape_command_line.py
@@ -0,0 +1,21 @@
+#!/usr/bin/env python
+
+import mozunit
+
+
+def test_escape_command_line(mock_adb_object, redirect_stdout_and_assert):
+    """Test _escape_command_line."""
+    cases = {
+        # expected output : test input
+        "adb shell ls -l": ["adb", "shell", "ls", "-l"],
+        "adb shell 'ls -l'": ["adb", "shell", "ls -l"],
+        "-e 'if (true)'": ["-e", "if (true)"],
+        "-e 'if (x === \"hello\")'": ["-e", 'if (x === "hello")'],
+        "-e 'if (x === '\"'\"'hello'\"'\"')'": ["-e", "if (x === 'hello')"],
+    }
+    for expected, input in cases.items():
+        assert mock_adb_object._escape_command_line(input) == expected
+
+
+if __name__ == "__main__":
+    mozunit.main()
diff --git a/testing/mozbase/mozdevice/tests/test_is_app_installed.py b/testing/mozbase/mozdevice/tests/test_is_app_installed.py
new file mode 100644
index 0000000000..a51836bc02
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/test_is_app_installed.py
@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+import mozunit
+import pytest
+from mozdevice import ADBError
+
+
+def test_is_app_installed(mock_adb_object):
+    """Tests that is_app_installed returns True if app is installed."""
+    assert mock_adb_object.is_app_installed("org.mozilla.geckoview_example")
+
+
+def test_is_app_installed_not_installed(mock_adb_object):
+    """Tests that is_app_installed returns False if provided app_name
+    does not resolve."""
+    assert not mock_adb_object.is_app_installed("some_random_name")
+
+
+def test_is_app_installed_partial_name(mock_adb_object):
+    """Tests that is_app_installed returns False if provided app_name
+    is only a partial match."""
+    assert not mock_adb_object.is_app_installed("fennec")
+
+
+def test_is_app_installed_package_manager_error(mock_adb_object):
+    """Tests that is_app_installed is able to raise an exception."""
+    with pytest.raises(ADBError):
+        mock_adb_object.is_app_installed("error")
+
+
+def test_is_app_installed_no_installed_package_found(mock_adb_object):
+    """Tests that is_app_installed is able to handle scenario
+    where no installed packages are found."""
+    assert not mock_adb_object.is_app_installed("none")
+
+
+if __name__ == "__main__":
+    mozunit.main()
diff --git a/testing/mozbase/mozdevice/tests/test_socket_connection.py b/testing/mozbase/mozdevice/tests/test_socket_connection.py
new file mode 100644
index 0000000000..1182737546
--- /dev/null
+++ b/testing/mozbase/mozdevice/tests/test_socket_connection.py
@@ -0,0 +1,124 @@
+#!/usr/bin/env python
+
+import mozunit
+import pytest
+from conftest import random_tcp_port
+
+
+@pytest.fixture(params=["tcp:{}".format(random_tcp_port()) for _ in range(5)])
+def select_test_port(request):
+    """Generate a list of ports to be used for testing."""
+    yield request.param
+
+
+def test_list_socket_connections_reverse(mock_adb_object):
+    assert [("['reverse',", "'--list']")] == mock_adb_object.list_socket_connections(
+        "reverse"
+    )
+
+
+def test_list_socket_connections_forward(mock_adb_object):
+    assert [("['forward',", "'--list']")] == mock_adb_object.list_socket_connections(
+        "forward"
+    )
+
+
+def test_create_socket_connection_reverse(
+    mock_adb_object, select_test_port, redirect_stdout_and_assert
+):
+    _expected = "['reverse', '{0}', '{0}']".format(select_test_port)
+    redirect_stdout_and_assert(
+        mock_adb_object.create_socket_connection,
+        direction="reverse",
+        local=select_test_port,
+        remote=select_test_port,
+        text=_expected,
+    )
+
+
+def test_create_socket_connection_forward(
+    mock_adb_object, select_test_port, redirect_stdout_and_assert
+):
+    _expected = "['forward', '{0}', '{0}']".format(select_test_port)
+    redirect_stdout_and_assert(
+        mock_adb_object.create_socket_connection,
+        direction="forward",
+        local=select_test_port,
+        remote=select_test_port,
+        text=_expected,
+    )
+
+
+def test_create_socket_connection_forward_adb_assigned_port(
+    mock_adb_object, select_test_port
+):
+    result = mock_adb_object.create_socket_connection(
+        direction="forward", local="tcp:0", remote=select_test_port
+    )
+    assert isinstance(result, int) and result == 7777
+
+
+def test_remove_socket_connections_reverse(mock_adb_object, redirect_stdout_and_assert):
+    _expected = "['reverse', '--remove-all']"
+    redirect_stdout_and_assert(
+        mock_adb_object.remove_socket_connections, direction="reverse", text=_expected
+    )
+
+
+def test_remove_socket_connections_forward(mock_adb_object, redirect_stdout_and_assert):
+    _expected = "['forward', '--remove-all']"
+    redirect_stdout_and_assert(
+        mock_adb_object.remove_socket_connections, direction="forward", text=_expected
+    )
+
+
+def test_legacy_forward(mock_adb_object, select_test_port, redirect_stdout_and_assert):
+    _expected = "['forward', '{0}', '{0}']".format(select_test_port)
+    redirect_stdout_and_assert(
+        mock_adb_object.forward,
+        local=select_test_port,
+        remote=select_test_port,
+        text=_expected,
+    )
+
+
+def test_legacy_forward_adb_assigned_port(mock_adb_object, select_test_port):
+    result = mock_adb_object.forward(local="tcp:0", remote=select_test_port)
+    assert isinstance(result, int) and result == 7777
+
+
+def test_legacy_reverse(mock_adb_object, select_test_port, redirect_stdout_and_assert):
+    _expected = "['reverse', '{0}', '{0}']".format(select_test_port)
+    redirect_stdout_and_assert(
+        mock_adb_object.reverse,
+        local=select_test_port,
+        remote=select_test_port,
+        text=_expected,
+    )
+
+
+def test_validate_port_invalid_prefix(mock_adb_object):
+    with pytest.raises(ValueError):
+        mock_adb_object._validate_port("{}".format("invalid"), is_local=True)
+
+
+@pytest.mark.xfail
+def test_validate_port_non_numerical_port_identifier(mock_adb_object):
+    with pytest.raises(AttributeError):
+        mock_adb_object._validate_port(
+            "{}".format("tcp:this:is:not:a:number"), is_local=True
+        )
+
+
+def test_validate_port_identifier_length_short(mock_adb_object):
+    with pytest.raises(ValueError):
+        mock_adb_object._validate_port("{}".format("tcp"), is_local=True)
+
+
+def test_validate_direction(mock_adb_object):
+    with pytest.raises(ValueError):
+        mock_adb_object._validate_direction("{}".format("bad direction"))
+
+
+if __name__ == "__main__":
+    mozunit.main()