Adding upstream version 115.7.0esr.upstream/115.7.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 392 insertions, 0 deletions

diff --git a/widget/gtk/wayland/viewporter-client-protocol.h b/widget/gtk/wayland/viewporter-client-protocol.h
new file mode 100644
index 0000000000..4c6c5bd910
--- /dev/null
+++ b/widget/gtk/wayland/viewporter-client-protocol.h
@@ -0,0 +1,392 @@
+/* Generated by wayland-scanner 1.18.0 */
+
+#ifndef VIEWPORTER_CLIENT_PROTOCOL_H
+#define VIEWPORTER_CLIENT_PROTOCOL_H
+
+#include <stdint.h>
+#include <stddef.h>
+#include "wayland-client.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @page page_viewporter The viewporter protocol
+ * @section page_ifaces_viewporter Interfaces
+ * - @subpage page_iface_wp_viewporter - surface cropping and scaling
+ * - @subpage page_iface_wp_viewport - crop and scale interface to a wl_surface
+ * @section page_copyright_viewporter Copyright
+ * <pre>
+ *
+ * Copyright © 2013-2016 Collabora, Ltd.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ * </pre>
+ */
+struct wl_surface;
+struct wp_viewport;
+struct wp_viewporter;
+
+/**
+ * @page page_iface_wp_viewporter wp_viewporter
+ * @section page_iface_wp_viewporter_desc Description
+ *
+ * The global interface exposing surface cropping and scaling
+ * capabilities is used to instantiate an interface extension for a
+ * wl_surface object. This extended interface will then allow
+ * cropping and scaling the surface contents, effectively
+ * disconnecting the direct relationship between the buffer and the
+ * surface size.
+ * @section page_iface_wp_viewporter_api API
+ * See @ref iface_wp_viewporter.
+ */
+/**
+ * @defgroup iface_wp_viewporter The wp_viewporter interface
+ *
+ * The global interface exposing surface cropping and scaling
+ * capabilities is used to instantiate an interface extension for a
+ * wl_surface object. This extended interface will then allow
+ * cropping and scaling the surface contents, effectively
+ * disconnecting the direct relationship between the buffer and the
+ * surface size.
+ */
+extern const struct wl_interface wp_viewporter_interface;
+/**
+ * @page page_iface_wp_viewport wp_viewport
+ * @section page_iface_wp_viewport_desc Description
+ *
+ * An additional interface to a wl_surface object, which allows the
+ * client to specify the cropping and scaling of the surface
+ * contents.
+ *
+ * This interface works with two concepts: the source rectangle (src_x,
+ * src_y, src_width, src_height), and the destination size (dst_width,
+ * dst_height). The contents of the source rectangle are scaled to the
+ * destination size, and content outside the source rectangle is ignored.
+ * This state is double-buffered, and is applied on the next
+ * wl_surface.commit.
+ *
+ * The two parts of crop and scale state are independent: the source
+ * rectangle, and the destination size. Initially both are unset, that
+ * is, no scaling is applied. The whole of the current wl_buffer is
+ * used as the source, and the surface size is as defined in
+ * wl_surface.attach.
+ *
+ * If the destination size is set, it causes the surface size to become
+ * dst_width, dst_height. The source (rectangle) is scaled to exactly
+ * this size. This overrides whatever the attached wl_buffer size is,
+ * unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface
+ * has no content and therefore no size. Otherwise, the size is always
+ * at least 1x1 in surface local coordinates.
+ *
+ * If the source rectangle is set, it defines what area of the wl_buffer is
+ * taken as the source. If the source rectangle is set and the destination
+ * size is not set, then src_width and src_height must be integers, and the
+ * surface size becomes the source rectangle size. This results in cropping
+ * without scaling. If src_width or src_height are not integers and
+ * destination size is not set, the bad_size protocol error is raised when
+ * the surface state is applied.
+ *
+ * The coordinate transformations from buffer pixel coordinates up to
+ * the surface-local coordinates happen in the following order:
+ * 1. buffer_transform (wl_surface.set_buffer_transform)
+ * 2. buffer_scale (wl_surface.set_buffer_scale)
+ * 3. crop and scale (wp_viewport.set*)
+ * This means, that the source rectangle coordinates of crop and scale
+ * are given in the coordinates after the buffer transform and scale,
+ * i.e. in the coordinates that would be the surface-local coordinates
+ * if the crop and scale was not applied.
+ *
+ * If src_x or src_y are negative, the bad_value protocol error is raised.
+ * Otherwise, if the source rectangle is partially or completely outside of
+ * the non-NULL wl_buffer, then the out_of_buffer protocol error is raised
+ * when the surface state is applied. A NULL wl_buffer does not raise the
+ * out_of_buffer error.
+ *
+ * The x, y arguments of wl_surface.attach are applied as normal to
+ * the surface. They indicate how many pixels to remove from the
+ * surface size from the left and the top. In other words, they are
+ * still in the surface-local coordinate system, just like dst_width
+ * and dst_height are.
+ *
+ * If the wl_surface associated with the wp_viewport is destroyed,
+ * all wp_viewport requests except 'destroy' raise the protocol error
+ * no_surface.
+ *
+ * If the wp_viewport object is destroyed, the crop and scale
+ * state is removed from the wl_surface. The change will be applied
+ * on the next wl_surface.commit.
+ * @section page_iface_wp_viewport_api API
+ * See @ref iface_wp_viewport.
+ */
+/**
+ * @defgroup iface_wp_viewport The wp_viewport interface
+ *
+ * An additional interface to a wl_surface object, which allows the
+ * client to specify the cropping and scaling of the surface
+ * contents.
+ *
+ * This interface works with two concepts: the source rectangle (src_x,
+ * src_y, src_width, src_height), and the destination size (dst_width,
+ * dst_height). The contents of the source rectangle are scaled to the
+ * destination size, and content outside the source rectangle is ignored.
+ * This state is double-buffered, and is applied on the next
+ * wl_surface.commit.
+ *
+ * The two parts of crop and scale state are independent: the source
+ * rectangle, and the destination size. Initially both are unset, that
+ * is, no scaling is applied. The whole of the current wl_buffer is
+ * used as the source, and the surface size is as defined in
+ * wl_surface.attach.
+ *
+ * If the destination size is set, it causes the surface size to become
+ * dst_width, dst_height. The source (rectangle) is scaled to exactly
+ * this size. This overrides whatever the attached wl_buffer size is,
+ * unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface
+ * has no content and therefore no size. Otherwise, the size is always
+ * at least 1x1 in surface local coordinates.
+ *
+ * If the source rectangle is set, it defines what area of the wl_buffer is
+ * taken as the source. If the source rectangle is set and the destination
+ * size is not set, then src_width and src_height must be integers, and the
+ * surface size becomes the source rectangle size. This results in cropping
+ * without scaling. If src_width or src_height are not integers and
+ * destination size is not set, the bad_size protocol error is raised when
+ * the surface state is applied.
+ *
+ * The coordinate transformations from buffer pixel coordinates up to
+ * the surface-local coordinates happen in the following order:
+ * 1. buffer_transform (wl_surface.set_buffer_transform)
+ * 2. buffer_scale (wl_surface.set_buffer_scale)
+ * 3. crop and scale (wp_viewport.set*)
+ * This means, that the source rectangle coordinates of crop and scale
+ * are given in the coordinates after the buffer transform and scale,
+ * i.e. in the coordinates that would be the surface-local coordinates
+ * if the crop and scale was not applied.
+ *
+ * If src_x or src_y are negative, the bad_value protocol error is raised.
+ * Otherwise, if the source rectangle is partially or completely outside of
+ * the non-NULL wl_buffer, then the out_of_buffer protocol error is raised
+ * when the surface state is applied. A NULL wl_buffer does not raise the
+ * out_of_buffer error.
+ *
+ * The x, y arguments of wl_surface.attach are applied as normal to
+ * the surface. They indicate how many pixels to remove from the
+ * surface size from the left and the top. In other words, they are
+ * still in the surface-local coordinate system, just like dst_width
+ * and dst_height are.
+ *
+ * If the wl_surface associated with the wp_viewport is destroyed,
+ * all wp_viewport requests except 'destroy' raise the protocol error
+ * no_surface.
+ *
+ * If the wp_viewport object is destroyed, the crop and scale
+ * state is removed from the wl_surface. The change will be applied
+ * on the next wl_surface.commit.
+ */
+extern const struct wl_interface wp_viewport_interface;
+
+#ifndef WP_VIEWPORTER_ERROR_ENUM
+#  define WP_VIEWPORTER_ERROR_ENUM
+enum wp_viewporter_error {
+  /**
+   * the surface already has a viewport object associated
+   */
+  WP_VIEWPORTER_ERROR_VIEWPORT_EXISTS = 0,
+};
+#endif /* WP_VIEWPORTER_ERROR_ENUM */
+
+#define WP_VIEWPORTER_DESTROY 0
+#define WP_VIEWPORTER_GET_VIEWPORT 1
+
+/**
+ * @ingroup iface_wp_viewporter
+ */
+#define WP_VIEWPORTER_DESTROY_SINCE_VERSION 1
+/**
+ * @ingroup iface_wp_viewporter
+ */
+#define WP_VIEWPORTER_GET_VIEWPORT_SINCE_VERSION 1
+
+/** @ingroup iface_wp_viewporter */
+static inline void wp_viewporter_set_user_data(
+    struct wp_viewporter* wp_viewporter, void* user_data) {
+  wl_proxy_set_user_data((struct wl_proxy*)wp_viewporter, user_data);
+}
+
+/** @ingroup iface_wp_viewporter */
+static inline void* wp_viewporter_get_user_data(
+    struct wp_viewporter* wp_viewporter) {
+  return wl_proxy_get_user_data((struct wl_proxy*)wp_viewporter);
+}
+
+static inline uint32_t wp_viewporter_get_version(
+    struct wp_viewporter* wp_viewporter) {
+  return wl_proxy_get_version((struct wl_proxy*)wp_viewporter);
+}
+
+/**
+ * @ingroup iface_wp_viewporter
+ *
+ * Informs the server that the client will not be using this
+ * protocol object anymore. This does not affect any other objects,
+ * wp_viewport objects included.
+ */
+static inline void wp_viewporter_destroy(struct wp_viewporter* wp_viewporter) {
+  wl_proxy_marshal((struct wl_proxy*)wp_viewporter, WP_VIEWPORTER_DESTROY);
+
+  wl_proxy_destroy((struct wl_proxy*)wp_viewporter);
+}
+
+/**
+ * @ingroup iface_wp_viewporter
+ *
+ * Instantiate an interface extension for the given wl_surface to
+ * crop and scale its content. If the given wl_surface already has
+ * a wp_viewport object associated, the viewport_exists
+ * protocol error is raised.
+ */
+static inline struct wp_viewport* wp_viewporter_get_viewport(
+    struct wp_viewporter* wp_viewporter, struct wl_surface* surface) {
+  struct wl_proxy* id;
+
+  id = wl_proxy_marshal_constructor((struct wl_proxy*)wp_viewporter,
+                                    WP_VIEWPORTER_GET_VIEWPORT,
+                                    &wp_viewport_interface, NULL, surface);
+
+  return (struct wp_viewport*)id;
+}
+
+#ifndef WP_VIEWPORT_ERROR_ENUM
+#  define WP_VIEWPORT_ERROR_ENUM
+enum wp_viewport_error {
+  /**
+   * negative or zero values in width or height
+   */
+  WP_VIEWPORT_ERROR_BAD_VALUE = 0,
+  /**
+   * destination size is not integer
+   */
+  WP_VIEWPORT_ERROR_BAD_SIZE = 1,
+  /**
+   * source rectangle extends outside of the content area
+   */
+  WP_VIEWPORT_ERROR_OUT_OF_BUFFER = 2,
+  /**
+   * the wl_surface was destroyed
+   */
+  WP_VIEWPORT_ERROR_NO_SURFACE = 3,
+};
+#endif /* WP_VIEWPORT_ERROR_ENUM */
+
+#define WP_VIEWPORT_DESTROY 0
+#define WP_VIEWPORT_SET_SOURCE 1
+#define WP_VIEWPORT_SET_DESTINATION 2
+
+/**
+ * @ingroup iface_wp_viewport
+ */
+#define WP_VIEWPORT_DESTROY_SINCE_VERSION 1
+/**
+ * @ingroup iface_wp_viewport
+ */
+#define WP_VIEWPORT_SET_SOURCE_SINCE_VERSION 1
+/**
+ * @ingroup iface_wp_viewport
+ */
+#define WP_VIEWPORT_SET_DESTINATION_SINCE_VERSION 1
+
+/** @ingroup iface_wp_viewport */
+static inline void wp_viewport_set_user_data(struct wp_viewport* wp_viewport,
+                                             void* user_data) {
+  wl_proxy_set_user_data((struct wl_proxy*)wp_viewport, user_data);
+}
+
+/** @ingroup iface_wp_viewport */
+static inline void* wp_viewport_get_user_data(struct wp_viewport* wp_viewport) {
+  return wl_proxy_get_user_data((struct wl_proxy*)wp_viewport);
+}
+
+static inline uint32_t wp_viewport_get_version(
+    struct wp_viewport* wp_viewport) {
+  return wl_proxy_get_version((struct wl_proxy*)wp_viewport);
+}
+
+/**
+ * @ingroup iface_wp_viewport
+ *
+ * The associated wl_surface's crop and scale state is removed.
+ * The change is applied on the next wl_surface.commit.
+ */
+static inline void wp_viewport_destroy(struct wp_viewport* wp_viewport) {
+  wl_proxy_marshal((struct wl_proxy*)wp_viewport, WP_VIEWPORT_DESTROY);
+
+  wl_proxy_destroy((struct wl_proxy*)wp_viewport);
+}
+
+/**
+ * @ingroup iface_wp_viewport
+ *
+ * Set the source rectangle of the associated wl_surface. See
+ * wp_viewport for the description, and relation to the wl_buffer
+ * size.
+ *
+ * If all of x, y, width and height are -1.0, the source rectangle is
+ * unset instead. Any other set of values where width or height are zero
+ * or negative, or x or y are negative, raise the bad_value protocol
+ * error.
+ *
+ * The crop and scale state is double-buffered state, and will be
+ * applied on the next wl_surface.commit.
+ */
+static inline void wp_viewport_set_source(struct wp_viewport* wp_viewport,
+                                          wl_fixed_t x, wl_fixed_t y,
+                                          wl_fixed_t width, wl_fixed_t height) {
+  wl_proxy_marshal((struct wl_proxy*)wp_viewport, WP_VIEWPORT_SET_SOURCE, x, y,
+                   width, height);
+}
+
+/**
+ * @ingroup iface_wp_viewport
+ *
+ * Set the destination size of the associated wl_surface. See
+ * wp_viewport for the description, and relation to the wl_buffer
+ * size.
+ *
+ * If width is -1 and height is -1, the destination size is unset
+ * instead. Any other pair of values for width and height that
+ * contains zero or negative values raises the bad_value protocol
+ * error.
+ *
+ * The crop and scale state is double-buffered state, and will be
+ * applied on the next wl_surface.commit.
+ */
+static inline void wp_viewport_set_destination(struct wp_viewport* wp_viewport,
+                                               int32_t width, int32_t height) {
+  wl_proxy_marshal((struct wl_proxy*)wp_viewport, WP_VIEWPORT_SET_DESTINATION,
+                   width, height);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif