Adding upstream version 115.7.0esr.upstream/115.7.0esr

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1031 insertions, 0 deletions

diff --git a/xpcom/tests/gtest/TestPipes.cpp b/xpcom/tests/gtest/TestPipes.cpp
new file mode 100644
index 0000000000..a4f0ebc7a5
--- /dev/null
+++ b/xpcom/tests/gtest/TestPipes.cpp
@@ -0,0 +1,1031 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include <algorithm>
+#include "gtest/gtest.h"
+#include "Helpers.h"
+#include "mozilla/gtest/MozAssertions.h"
+#include "mozilla/ReentrantMonitor.h"
+#include "mozilla/Printf.h"
+#include "nsCOMPtr.h"
+#include "nsCRT.h"
+#include "nsIAsyncInputStream.h"
+#include "nsIAsyncOutputStream.h"
+#include "nsIBufferedStreams.h"
+#include "nsIClassInfo.h"
+#include "nsICloneableInputStream.h"
+#include "nsIInputStream.h"
+#include "nsIOutputStream.h"
+#include "nsIPipe.h"
+#include "nsITellableStream.h"
+#include "nsIThread.h"
+#include "nsIRunnable.h"
+#include "nsStreamUtils.h"
+#include "nsString.h"
+#include "nsThreadUtils.h"
+#include "prinrval.h"
+
+using namespace mozilla;
+
+#define ITERATIONS 33333
+char kTestPattern[] = "My hovercraft is full of eels.\n";
+
+bool gTrace = false;
+
+static nsresult WriteAll(nsIOutputStream* os, const char* buf, uint32_t bufLen,
+                         uint32_t* lenWritten) {
+  const char* p = buf;
+  *lenWritten = 0;
+  while (bufLen) {
+    uint32_t n;
+    nsresult rv = os->Write(p, bufLen, &n);
+    if (NS_FAILED(rv)) return rv;
+    p += n;
+    bufLen -= n;
+    *lenWritten += n;
+  }
+  return NS_OK;
+}
+
+class nsReceiver final : public Runnable {
+ public:
+  NS_IMETHOD Run() override {
+    nsresult rv;
+    char buf[101];
+    uint32_t count;
+    PRIntervalTime start = PR_IntervalNow();
+    while (true) {
+      rv = mIn->Read(buf, 100, &count);
+      if (NS_FAILED(rv)) {
+        printf("read failed\n");
+        break;
+      }
+      if (count == 0) {
+        //                printf("EOF count = %d\n", mCount);
+        break;
+      }
+
+      if (gTrace) {
+        buf[count] = '\0';
+        printf("read: %s\n", buf);
+      }
+      mCount += count;
+    }
+    PRIntervalTime end = PR_IntervalNow();
+    printf("read  %d bytes, time = %dms\n", mCount,
+           PR_IntervalToMilliseconds(end - start));
+    return rv;
+  }
+
+  explicit nsReceiver(nsIInputStream* in)
+      : Runnable("nsReceiver"), mIn(in), mCount(0) {}
+
+  uint32_t GetBytesRead() { return mCount; }
+
+ private:
+  ~nsReceiver() = default;
+
+ protected:
+  nsCOMPtr<nsIInputStream> mIn;
+  uint32_t mCount;
+};
+
+static nsresult TestPipe(nsIInputStream* in, nsIOutputStream* out) {
+  RefPtr<nsReceiver> receiver = new nsReceiver(in);
+  nsresult rv;
+
+  nsCOMPtr<nsIThread> thread;
+  rv = NS_NewNamedThread("TestPipe", getter_AddRefs(thread), receiver);
+  if (NS_FAILED(rv)) return rv;
+
+  uint32_t total = 0;
+  PRIntervalTime start = PR_IntervalNow();
+  for (uint32_t i = 0; i < ITERATIONS; i++) {
+    uint32_t writeCount;
+    SmprintfPointer buf = mozilla::Smprintf("%d %s", i, kTestPattern);
+    uint32_t len = strlen(buf.get());
+    rv = WriteAll(out, buf.get(), len, &writeCount);
+    if (gTrace) {
+      printf("wrote: ");
+      for (uint32_t j = 0; j < writeCount; j++) {
+        putc(buf.get()[j], stdout);
+      }
+      printf("\n");
+    }
+    if (NS_FAILED(rv)) return rv;
+    total += writeCount;
+  }
+  rv = out->Close();
+  if (NS_FAILED(rv)) return rv;
+
+  PRIntervalTime end = PR_IntervalNow();
+
+  thread->Shutdown();
+
+  printf("wrote %d bytes, time = %dms\n", total,
+         PR_IntervalToMilliseconds(end - start));
+  EXPECT_EQ(receiver->GetBytesRead(), total);
+
+  return NS_OK;
+}
+
+////////////////////////////////////////////////////////////////////////////////
+
+class nsShortReader final : public Runnable {
+ public:
+  NS_IMETHOD Run() override {
+    nsresult rv;
+    char buf[101];
+    uint32_t count;
+    uint32_t total = 0;
+    while (true) {
+      // if (gTrace)
+      //    printf("calling Read\n");
+      rv = mIn->Read(buf, 100, &count);
+      if (NS_FAILED(rv)) {
+        printf("read failed\n");
+        break;
+      }
+      if (count == 0) {
+        break;
+      }
+
+      if (gTrace) {
+        // For next |printf()| call and possible others elsewhere.
+        buf[count] = '\0';
+
+        printf("read %d bytes: %s\n", count, buf);
+      }
+
+      Received(count);
+      total += count;
+    }
+    printf("read  %d bytes\n", total);
+    return rv;
+  }
+
+  explicit nsShortReader(nsIInputStream* in)
+      : Runnable("nsShortReader"), mIn(in), mReceived(0) {
+    mMon = new ReentrantMonitor("nsShortReader");
+  }
+
+  void Received(uint32_t count) {
+    ReentrantMonitorAutoEnter mon(*mMon);
+    mReceived += count;
+    mon.Notify();
+  }
+
+  uint32_t WaitForReceipt(const uint32_t aWriteCount) {
+    ReentrantMonitorAutoEnter mon(*mMon);
+    uint32_t result = mReceived;
+
+    while (result < aWriteCount) {
+      mon.Wait();
+
+      EXPECT_TRUE(mReceived > result);
+      result = mReceived;
+    }
+
+    mReceived = 0;
+    return result;
+  }
+
+ private:
+  ~nsShortReader() = default;
+
+ protected:
+  nsCOMPtr<nsIInputStream> mIn;
+  uint32_t mReceived;
+  ReentrantMonitor* mMon;
+};
+
+static nsresult TestShortWrites(nsIInputStream* in, nsIOutputStream* out) {
+  RefPtr<nsShortReader> receiver = new nsShortReader(in);
+  nsresult rv;
+
+  nsCOMPtr<nsIThread> thread;
+  rv = NS_NewNamedThread("TestShortWrites", getter_AddRefs(thread), receiver);
+  if (NS_FAILED(rv)) return rv;
+
+  uint32_t total = 0;
+  for (uint32_t i = 0; i < ITERATIONS; i++) {
+    uint32_t writeCount;
+    SmprintfPointer buf = mozilla::Smprintf("%d %s", i, kTestPattern);
+    uint32_t len = strlen(buf.get());
+    len = len * rand() / RAND_MAX;
+    len = std::min(1u, len);
+    rv = WriteAll(out, buf.get(), len, &writeCount);
+    if (NS_FAILED(rv)) return rv;
+    EXPECT_EQ(writeCount, len);
+    total += writeCount;
+
+    if (gTrace) printf("wrote %d bytes: %s\n", writeCount, buf.get());
+    // printf("calling Flush\n");
+    out->Flush();
+    // printf("calling WaitForReceipt\n");
+
+#ifdef DEBUG
+    const uint32_t received = receiver->WaitForReceipt(writeCount);
+    EXPECT_EQ(received, writeCount);
+#endif
+  }
+  rv = out->Close();
+  if (NS_FAILED(rv)) return rv;
+
+  thread->Shutdown();
+
+  printf("wrote %d bytes\n", total);
+
+  return NS_OK;
+}
+
+////////////////////////////////////////////////////////////////////////////////
+
+class nsPump final : public Runnable {
+ public:
+  NS_IMETHOD Run() override {
+    nsresult rv;
+    uint32_t count;
+    while (true) {
+      rv = mOut->WriteFrom(mIn, ~0U, &count);
+      if (NS_FAILED(rv)) {
+        printf("Write failed\n");
+        break;
+      }
+      if (count == 0) {
+        printf("EOF count = %d\n", mCount);
+        break;
+      }
+
+      if (gTrace) {
+        printf("Wrote: %d\n", count);
+      }
+      mCount += count;
+    }
+    mOut->Close();
+    return rv;
+  }
+
+  nsPump(nsIInputStream* in, nsIOutputStream* out)
+      : Runnable("nsPump"), mIn(in), mOut(out), mCount(0) {}
+
+ private:
+  ~nsPump() = default;
+
+ protected:
+  nsCOMPtr<nsIInputStream> mIn;
+  nsCOMPtr<nsIOutputStream> mOut;
+  uint32_t mCount;
+};
+
+TEST(Pipes, ChainedPipes)
+{
+  nsresult rv;
+  if (gTrace) {
+    printf("TestChainedPipes\n");
+  }
+
+  nsCOMPtr<nsIInputStream> in1;
+  nsCOMPtr<nsIOutputStream> out1;
+  NS_NewPipe(getter_AddRefs(in1), getter_AddRefs(out1), 20, 1999);
+
+  nsCOMPtr<nsIInputStream> in2;
+  nsCOMPtr<nsIOutputStream> out2;
+  NS_NewPipe(getter_AddRefs(in2), getter_AddRefs(out2), 200, 401);
+
+  RefPtr<nsPump> pump = new nsPump(in1, out2);
+  if (pump == nullptr) return;
+
+  nsCOMPtr<nsIThread> thread;
+  rv = NS_NewNamedThread("ChainedPipePump", getter_AddRefs(thread), pump);
+  if (NS_FAILED(rv)) return;
+
+  RefPtr<nsReceiver> receiver = new nsReceiver(in2);
+  if (receiver == nullptr) return;
+
+  nsCOMPtr<nsIThread> receiverThread;
+  rv = NS_NewNamedThread("ChainedPipeRecv", getter_AddRefs(receiverThread),
+                         receiver);
+  if (NS_FAILED(rv)) return;
+
+  uint32_t total = 0;
+  for (uint32_t i = 0; i < ITERATIONS; i++) {
+    uint32_t writeCount;
+    SmprintfPointer buf = mozilla::Smprintf("%d %s", i, kTestPattern);
+    uint32_t len = strlen(buf.get());
+    len = len * rand() / RAND_MAX;
+    len = std::max(1u, len);
+    rv = WriteAll(out1, buf.get(), len, &writeCount);
+    if (NS_FAILED(rv)) return;
+    EXPECT_EQ(writeCount, len);
+    total += writeCount;
+
+    if (gTrace) printf("wrote %d bytes: %s\n", writeCount, buf.get());
+  }
+  if (gTrace) {
+    printf("wrote total of %d bytes\n", total);
+  }
+  rv = out1->Close();
+  if (NS_FAILED(rv)) return;
+
+  thread->Shutdown();
+  receiverThread->Shutdown();
+}
+
+////////////////////////////////////////////////////////////////////////////////
+
+static void RunTests(uint32_t segSize, uint32_t segCount) {
+  nsresult rv;
+  nsCOMPtr<nsIInputStream> in;
+  nsCOMPtr<nsIOutputStream> out;
+  uint32_t bufSize = segSize * segCount;
+  if (gTrace) {
+    printf("Testing New Pipes: segment size %d buffer size %d\n", segSize,
+           bufSize);
+    printf("Testing long writes...\n");
+  }
+  NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize);
+  rv = TestPipe(in, out);
+  EXPECT_NS_SUCCEEDED(rv);
+
+  if (gTrace) {
+    printf("Testing short writes...\n");
+  }
+  NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize);
+  rv = TestShortWrites(in, out);
+  EXPECT_NS_SUCCEEDED(rv);
+}
+
+TEST(Pipes, Main)
+{
+  RunTests(16, 1);
+  RunTests(4096, 16);
+}
+
+////////////////////////////////////////////////////////////////////////////////
+
+namespace {
+
+static const uint32_t DEFAULT_SEGMENT_SIZE = 4 * 1024;
+
+// An alternate pipe testing routing that uses NS_ConsumeStream() instead of
+// manual read loop.
+static void TestPipe2(uint32_t aNumBytes,
+                      uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE) {
+  nsCOMPtr<nsIInputStream> reader;
+  nsCOMPtr<nsIOutputStream> writer;
+
+  uint32_t maxSize = std::max(aNumBytes, aSegmentSize);
+
+  NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), aSegmentSize,
+             maxSize);
+
+  nsTArray<char> inputData;
+  testing::CreateData(aNumBytes, inputData);
+  testing::WriteAllAndClose(writer, inputData);
+  testing::ConsumeAndValidateStream(reader, inputData);
+}
+
+}  // namespace
+
+TEST(Pipes, Blocking_32k)
+{ TestPipe2(32 * 1024); }
+
+TEST(Pipes, Blocking_64k)
+{ TestPipe2(64 * 1024); }
+
+TEST(Pipes, Blocking_128k)
+{ TestPipe2(128 * 1024); }
+
+////////////////////////////////////////////////////////////////////////////////
+
+namespace {
+
+// Utility routine to validate pipe clone before.  There are many knobs.
+//
+// aTotalBytes              Total number of bytes to write to the pipe.
+// aNumWrites               How many separate write calls should be made.  Bytes
+//                          are evenly distributed over these write calls.
+// aNumInitialClones        How many clones of the pipe input stream should be
+//                          made before writing begins.
+// aNumToCloseAfterWrite    How many streams should be closed after each write.
+//                          One stream is always kept open.  This verifies that
+//                          closing one stream does not effect other open
+//                          streams.
+// aNumToCloneAfterWrite    How many clones to create after each write.  Occurs
+//                          after closing any streams.  This tests cloning
+//                          active streams on a pipe that is being written to.
+// aNumStreamToReadPerWrite How many streams to read fully after each write.
+//                          This tests reading cloned streams at different rates
+//                          while the pipe is being written to.
+static void TestPipeClone(uint32_t aTotalBytes, uint32_t aNumWrites,
+                          uint32_t aNumInitialClones,
+                          uint32_t aNumToCloseAfterWrite,
+                          uint32_t aNumToCloneAfterWrite,
+                          uint32_t aNumStreamsToReadPerWrite,
+                          uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE) {
+  nsCOMPtr<nsIInputStream> reader;
+  nsCOMPtr<nsIOutputStream> writer;
+
+  uint32_t maxSize = std::max(aTotalBytes, aSegmentSize);
+
+  // Use async input streams so we can NS_ConsumeStream() the current data
+  // while the pipe is still being written to.
+  NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), aSegmentSize,
+             maxSize, true, false);  // non-blocking - reader, writer
+
+  nsCOMPtr<nsICloneableInputStream> cloneable = do_QueryInterface(reader);
+  ASSERT_TRUE(cloneable);
+  ASSERT_TRUE(cloneable->GetCloneable());
+
+  nsTArray<nsCString> outputDataList;
+
+  nsTArray<nsCOMPtr<nsIInputStream>> streamList;
+
+  // first stream is our original reader from the pipe
+  streamList.AppendElement(reader);
+  outputDataList.AppendElement();
+
+  // Clone the initial input stream the specified number of times
+  // before performing any writes.
+  nsresult rv;
+  for (uint32_t i = 0; i < aNumInitialClones; ++i) {
+    nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement();
+    rv = cloneable->Clone(getter_AddRefs(*clone));
+    ASSERT_NS_SUCCEEDED(rv);
+    ASSERT_TRUE(*clone);
+
+    outputDataList.AppendElement();
+  }
+
+  nsTArray<char> inputData;
+  testing::CreateData(aTotalBytes, inputData);
+
+  const uint32_t bytesPerWrite = ((aTotalBytes - 1) / aNumWrites) + 1;
+  uint32_t offset = 0;
+  uint32_t remaining = aTotalBytes;
+  uint32_t nextStreamToRead = 0;
+
+  while (remaining) {
+    uint32_t numToWrite = std::min(bytesPerWrite, remaining);
+    testing::Write(writer, inputData, offset, numToWrite);
+    offset += numToWrite;
+    remaining -= numToWrite;
+
+    // Close the specified number of streams.  This allows us to
+    // test that one closed clone does not break other open clones.
+    for (uint32_t i = 0; i < aNumToCloseAfterWrite && streamList.Length() > 1;
+         ++i) {
+      uint32_t lastIndex = streamList.Length() - 1;
+      streamList[lastIndex]->Close();
+      streamList.RemoveElementAt(lastIndex);
+      outputDataList.RemoveElementAt(lastIndex);
+
+      if (nextStreamToRead >= streamList.Length()) {
+        nextStreamToRead = 0;
+      }
+    }
+
+    // Create the specified number of clones.  This lets us verify
+    // that we can create clones in the middle of pipe reading and
+    // writing.
+    for (uint32_t i = 0; i < aNumToCloneAfterWrite; ++i) {
+      nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement();
+      rv = cloneable->Clone(getter_AddRefs(*clone));
+      ASSERT_NS_SUCCEEDED(rv);
+      ASSERT_TRUE(*clone);
+
+      // Initialize the new output data to make whats been read to data for
+      // the original stream.  First stream is always the original stream.
+      nsCString* outputData = outputDataList.AppendElement();
+      *outputData = outputDataList[0];
+    }
+
+    // Read the specified number of streams.  This lets us verify that we
+    // can read from the clones at different rates while the pipe is being
+    // written to.
+    for (uint32_t i = 0; i < aNumStreamsToReadPerWrite; ++i) {
+      nsCOMPtr<nsIInputStream>& stream = streamList[nextStreamToRead];
+      nsCString& outputData = outputDataList[nextStreamToRead];
+
+      // Can't use ConsumeAndValidateStream() here because we're not
+      // guaranteed the exact amount read.  It should just be at least
+      // as many as numToWrite.
+      nsAutoCString tmpOutputData;
+      rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData);
+      ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv));
+      ASSERT_GE(tmpOutputData.Length(), numToWrite);
+
+      outputData += tmpOutputData;
+
+      nextStreamToRead += 1;
+      if (nextStreamToRead >= streamList.Length()) {
+        // Note: When we wrap around on the streams being read, its possible
+        //       we will trigger a segment to be deleted from the pipe.  It
+        //       would be nice to validate this here, but we don't have any
+        //       QI'able interface that would let us check easily.
+
+        nextStreamToRead = 0;
+      }
+    }
+  }
+
+  rv = writer->Close();
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsDependentCSubstring inputString(inputData.Elements(), inputData.Length());
+
+  // Finally, read the remaining bytes from each stream.  This may be
+  // different amounts of data depending on how much reading we did while
+  // writing.  Verify that the end result matches the input data.
+  for (uint32_t i = 0; i < streamList.Length(); ++i) {
+    nsCOMPtr<nsIInputStream>& stream = streamList[i];
+    nsCString& outputData = outputDataList[i];
+
+    nsAutoCString tmpOutputData;
+    rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData);
+    ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv));
+    stream->Close();
+
+    // Append to total amount read from the stream
+    outputData += tmpOutputData;
+
+    ASSERT_EQ(inputString.Length(), outputData.Length());
+    ASSERT_TRUE(inputString.Equals(outputData));
+  }
+}
+
+}  // namespace
+
+TEST(Pipes, Clone_BeforeWrite_ReadAtEnd)
+{
+  TestPipeClone(32 * 1024,  // total bytes
+                16,         // num writes
+                3,          // num initial clones
+                0,          // num streams to close after each write
+                0,          // num clones to add after each write
+                0);         // num streams to read after each write
+}
+
+TEST(Pipes, Clone_BeforeWrite_ReadDuringWrite)
+{
+  // Since this reads all streams on every write, it should trigger the
+  // pipe cursor roll back optimization.  Currently we can only verify
+  // this with logging.
+
+  TestPipeClone(32 * 1024,  // total bytes
+                16,         // num writes
+                3,          // num initial clones
+                0,          // num streams to close after each write
+                0,          // num clones to add after each write
+                4);         // num streams to read after each write
+}
+
+TEST(Pipes, Clone_DuringWrite_ReadAtEnd)
+{
+  TestPipeClone(32 * 1024,  // total bytes
+                16,         // num writes
+                0,          // num initial clones
+                0,          // num streams to close after each write
+                1,          // num clones to add after each write
+                0);         // num streams to read after each write
+}
+
+TEST(Pipes, Clone_DuringWrite_ReadDuringWrite)
+{
+  TestPipeClone(32 * 1024,  // total bytes
+                16,         // num writes
+                0,          // num initial clones
+                0,          // num streams to close after each write
+                1,          // num clones to add after each write
+                1);         // num streams to read after each write
+}
+
+TEST(Pipes, Clone_DuringWrite_ReadDuringWrite_CloseDuringWrite)
+{
+  // Since this reads streams faster than we clone new ones, it should
+  // trigger pipe segment deletion periodically.  Currently we can
+  // only verify this with logging.
+
+  TestPipeClone(32 * 1024,  // total bytes
+                16,         // num writes
+                1,          // num initial clones
+                1,          // num streams to close after each write
+                2,          // num clones to add after each write
+                3);         // num streams to read after each write
+}
+
+TEST(Pipes, Write_AsyncWait)
+{
+  nsCOMPtr<nsIAsyncInputStream> reader;
+  nsCOMPtr<nsIAsyncOutputStream> writer;
+
+  const uint32_t segmentSize = 1024;
+  const uint32_t numSegments = 1;
+
+  NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), true,
+              true,  // non-blocking - reader, writer
+              segmentSize, numSegments);
+
+  nsTArray<char> inputData;
+  testing::CreateData(segmentSize, inputData);
+
+  uint32_t numWritten = 0;
+  nsresult rv =
+      writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
+
+  RefPtr<testing::OutputStreamCallback> cb =
+      new testing::OutputStreamCallback();
+
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb->Called());
+
+  testing::ConsumeAndValidateStream(reader, inputData);
+
+  ASSERT_TRUE(cb->Called());
+}
+
+TEST(Pipes, Write_AsyncWait_Clone)
+{
+  nsCOMPtr<nsIAsyncInputStream> reader;
+  nsCOMPtr<nsIAsyncOutputStream> writer;
+
+  const uint32_t segmentSize = 1024;
+  const uint32_t numSegments = 1;
+
+  NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), true,
+              true,  // non-blocking - reader, writer
+              segmentSize, numSegments);
+
+  nsCOMPtr<nsIInputStream> clone;
+  nsresult rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsTArray<char> inputData;
+  testing::CreateData(segmentSize, inputData);
+
+  uint32_t numWritten = 0;
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // This attempts to write data beyond the original pipe size limit.  It
+  // should fail since neither side of the clone has been read yet.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
+
+  RefPtr<testing::OutputStreamCallback> cb =
+      new testing::OutputStreamCallback();
+
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb->Called());
+
+  // Consume data on the original stream, but the clone still has not been read.
+  testing::ConsumeAndValidateStream(reader, inputData);
+
+  // A clone that is not being read should not stall the other input stream
+  // reader.  Therefore the writer callback should trigger when the fastest
+  // reader drains the other input stream.
+  ASSERT_TRUE(cb->Called());
+
+  // Attempt to write data.  This will buffer data beyond the pipe size limit in
+  // order for the clone stream to still work.  This is allowed because the
+  // other input stream has drained its buffered segments and is ready for more
+  // data.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // Again, this should fail since the origin stream has not been read again.
+  // The pipe size should still restrict how far ahead we can buffer even
+  // when there is a cloned stream not being read.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_FAILED(rv);
+
+  cb = new testing::OutputStreamCallback();
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // The write should again be blocked since we have written data and the
+  // main reader is at its maximum advance buffer.
+  ASSERT_FALSE(cb->Called());
+
+  nsTArray<char> expectedCloneData;
+  expectedCloneData.AppendElements(inputData);
+  expectedCloneData.AppendElements(inputData);
+
+  // We should now be able to consume the entire backlog of buffered data on
+  // the cloned stream.
+  testing::ConsumeAndValidateStream(clone, expectedCloneData);
+
+  // Draining the clone side should also trigger the AsyncWait() writer
+  // callback
+  ASSERT_TRUE(cb->Called());
+
+  // Finally, we should be able to consume the remaining data on the original
+  // reader.
+  testing::ConsumeAndValidateStream(reader, inputData);
+}
+
+TEST(Pipes, Write_AsyncWait_Clone_CloseOriginal)
+{
+  nsCOMPtr<nsIAsyncInputStream> reader;
+  nsCOMPtr<nsIAsyncOutputStream> writer;
+
+  const uint32_t segmentSize = 1024;
+  const uint32_t numSegments = 1;
+
+  NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), true,
+              true,  // non-blocking - reader, writer
+              segmentSize, numSegments);
+
+  nsCOMPtr<nsIInputStream> clone;
+  nsresult rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsTArray<char> inputData;
+  testing::CreateData(segmentSize, inputData);
+
+  uint32_t numWritten = 0;
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // This attempts to write data beyond the original pipe size limit.  It
+  // should fail since neither side of the clone has been read yet.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
+
+  RefPtr<testing::OutputStreamCallback> cb =
+      new testing::OutputStreamCallback();
+
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb->Called());
+
+  // Consume data on the original stream, but the clone still has not been read.
+  testing::ConsumeAndValidateStream(reader, inputData);
+
+  // A clone that is not being read should not stall the other input stream
+  // reader.  Therefore the writer callback should trigger when the fastest
+  // reader drains the other input stream.
+  ASSERT_TRUE(cb->Called());
+
+  // Attempt to write data.  This will buffer data beyond the pipe size limit in
+  // order for the clone stream to still work.  This is allowed because the
+  // other input stream has drained its buffered segments and is ready for more
+  // data.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // Again, this should fail since the origin stream has not been read again.
+  // The pipe size should still restrict how far ahead we can buffer even
+  // when there is a cloned stream not being read.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_FAILED(rv);
+
+  cb = new testing::OutputStreamCallback();
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // The write should again be blocked since we have written data and the
+  // main reader is at its maximum advance buffer.
+  ASSERT_FALSE(cb->Called());
+
+  // Close the original reader input stream.  This was the fastest reader,
+  // so we should have a single stream that is buffered beyond our nominal
+  // limit.
+  reader->Close();
+
+  // Because the clone stream is still buffered the writable callback should
+  // not be fired.
+  ASSERT_FALSE(cb->Called());
+
+  // And we should not be able to perform a write.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_FAILED(rv);
+
+  // Create another clone stream.  Now we have two streams that exceed our
+  // maximum size limit
+  nsCOMPtr<nsIInputStream> clone2;
+  rv = NS_CloneInputStream(clone, getter_AddRefs(clone2));
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsTArray<char> expectedCloneData;
+  expectedCloneData.AppendElements(inputData);
+  expectedCloneData.AppendElements(inputData);
+
+  // We should now be able to consume the entire backlog of buffered data on
+  // the cloned stream.
+  testing::ConsumeAndValidateStream(clone, expectedCloneData);
+
+  // The pipe should now be writable because we have two open streams, one of
+  // which is completely drained.
+  ASSERT_TRUE(cb->Called());
+
+  // Write again to reach our limit again.
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  // The stream is again non-writeable.
+  cb = new testing::OutputStreamCallback();
+  rv = writer->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+  ASSERT_FALSE(cb->Called());
+
+  // Close the empty stream.  This is different from our previous close since
+  // before we were closing a stream with some data still buffered.
+  clone->Close();
+
+  // The pipe should not be writable.  The second clone is still fully buffered
+  // over our limit.
+  ASSERT_FALSE(cb->Called());
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_FAILED(rv);
+
+  // Finally consume all of the buffered data on the second clone.
+  expectedCloneData.AppendElements(inputData);
+  testing::ConsumeAndValidateStream(clone2, expectedCloneData);
+
+  // Draining the final clone should make the pipe writable again.
+  ASSERT_TRUE(cb->Called());
+}
+
+TEST(Pipes, Read_AsyncWait)
+{
+  nsCOMPtr<nsIAsyncInputStream> reader;
+  nsCOMPtr<nsIAsyncOutputStream> writer;
+
+  const uint32_t segmentSize = 1024;
+  const uint32_t numSegments = 1;
+
+  NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), true,
+              true,  // non-blocking - reader, writer
+              segmentSize, numSegments);
+
+  nsTArray<char> inputData;
+  testing::CreateData(segmentSize, inputData);
+
+  RefPtr<testing::InputStreamCallback> cb = new testing::InputStreamCallback();
+
+  nsresult rv = reader->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb->Called());
+
+  uint32_t numWritten = 0;
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_TRUE(cb->Called());
+
+  testing::ConsumeAndValidateStream(reader, inputData);
+}
+
+TEST(Pipes, Read_AsyncWait_Clone)
+{
+  nsCOMPtr<nsIAsyncInputStream> reader;
+  nsCOMPtr<nsIAsyncOutputStream> writer;
+
+  const uint32_t segmentSize = 1024;
+  const uint32_t numSegments = 1;
+
+  NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer), true,
+              true,  // non-blocking - reader, writer
+              segmentSize, numSegments);
+
+  nsCOMPtr<nsIInputStream> clone;
+  nsresult rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsCOMPtr<nsIAsyncInputStream> asyncClone = do_QueryInterface(clone);
+  ASSERT_TRUE(asyncClone);
+
+  nsTArray<char> inputData;
+  testing::CreateData(segmentSize, inputData);
+
+  RefPtr<testing::InputStreamCallback> cb = new testing::InputStreamCallback();
+
+  RefPtr<testing::InputStreamCallback> cb2 = new testing::InputStreamCallback();
+
+  rv = reader->AsyncWait(cb, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb->Called());
+
+  rv = asyncClone->AsyncWait(cb2, 0, 0, nullptr);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_FALSE(cb2->Called());
+
+  uint32_t numWritten = 0;
+  rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  ASSERT_TRUE(cb->Called());
+  ASSERT_TRUE(cb2->Called());
+
+  testing::ConsumeAndValidateStream(reader, inputData);
+}
+
+namespace {
+
+nsresult CloseDuringReadFunc(nsIInputStream* aReader, void* aClosure,
+                             const char* aFromSegment, uint32_t aToOffset,
+                             uint32_t aCount, uint32_t* aWriteCountOut) {
+  MOZ_RELEASE_ASSERT(aReader);
+  MOZ_RELEASE_ASSERT(aClosure);
+  MOZ_RELEASE_ASSERT(aFromSegment);
+  MOZ_RELEASE_ASSERT(aWriteCountOut);
+  MOZ_RELEASE_ASSERT(aToOffset == 0);
+
+  // This is insanity and you probably should not do this under normal
+  // conditions.  We want to simulate the case where the pipe is closed
+  // (possibly from other end on another thread) simultaneously with the
+  // read.  This is the easiest way to do trigger this case in a synchronous
+  // gtest.
+  MOZ_ALWAYS_SUCCEEDS(aReader->Close());
+
+  nsTArray<char>* buffer = static_cast<nsTArray<char>*>(aClosure);
+  buffer->AppendElements(aFromSegment, aCount);
+
+  *aWriteCountOut = aCount;
+
+  return NS_OK;
+}
+
+void TestCloseDuringRead(uint32_t aSegmentSize, uint32_t aDataSize) {
+  nsCOMPtr<nsIInputStream> reader;
+  nsCOMPtr<nsIOutputStream> writer;
+
+  const uint32_t maxSize = aSegmentSize;
+
+  NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer), aSegmentSize,
+             maxSize);
+
+  nsTArray<char> inputData;
+
+  testing::CreateData(aDataSize, inputData);
+
+  uint32_t numWritten = 0;
+  nsresult rv =
+      writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
+  ASSERT_NS_SUCCEEDED(rv);
+
+  nsTArray<char> outputData;
+
+  uint32_t numRead = 0;
+  rv = reader->ReadSegments(CloseDuringReadFunc, &outputData,
+                            inputData.Length(), &numRead);
+  ASSERT_NS_SUCCEEDED(rv);
+  ASSERT_EQ(inputData.Length(), numRead);
+
+  ASSERT_EQ(inputData, outputData);
+
+  uint64_t available;
+  rv = reader->Available(&available);
+  ASSERT_EQ(NS_BASE_STREAM_CLOSED, rv);
+}
+
+}  // namespace
+
+TEST(Pipes, Close_During_Read_Partial_Segment)
+{ TestCloseDuringRead(1024, 512); }
+
+TEST(Pipes, Close_During_Read_Full_Segment)
+{ TestCloseDuringRead(1024, 1024); }
+
+TEST(Pipes, Interfaces)
+{
+  nsCOMPtr<nsIInputStream> reader;
+  nsCOMPtr<nsIOutputStream> writer;
+
+  NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer));
+
+  nsCOMPtr<nsIAsyncInputStream> readerType1 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType1);
+
+  nsCOMPtr<nsITellableStream> readerType2 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType2);
+
+  nsCOMPtr<nsISearchableInputStream> readerType3 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType3);
+
+  nsCOMPtr<nsICloneableInputStream> readerType4 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType4);
+
+  nsCOMPtr<nsIClassInfo> readerType5 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType5);
+
+  nsCOMPtr<nsIBufferedInputStream> readerType6 = do_QueryInterface(reader);
+  ASSERT_TRUE(readerType6);
+}